Yan-Chao Hu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Yan-Chao Hu has a total of 18 co-authors. Here are the top co-authors by number of shared publications:
- Yanguang Yang
National Key Laboratory of Aerospace Physics in Fluids, Mianyang 621000, China
8 shared publications - Wen-Feng Zhou
Hypervelocity Aerodynamics Institute, China Aerodynamics Research and Development Centre, Mianyang 621000, China
6 shared publications Gang Wang
Hypervelocity Aerodynamics Institute (HAI), China Aerodynamics Research and Development Center, Mianyang 621000, PR China
3 shared publicationsZhi-Gong Tang
China Aerodynamics Research and Development Center, Mianyang 621000, PR China
3 shared publications- Gang Wang
Hypervelocity Aerodynamics Institute, China Aerodynamics Research and Development Center, Mianyang 621000, China
2 shared publications - Ming-Zhi Tang
Hypervelocity Aerodynamics Institute, China Aerodynamics Research and Development Centre, Mianyang 621000, China
2 shared publications
Latest Publications
- Open Access
- 4 November 2024
- Published by Cambridge University Press (CUP) in Journal of Fluid Mechanics
- Vol. 998, A54
Scales and self-sustained mechanism of reattachment unsteadiness in separated shock wave/boundary layer interaction
The spatio-temporal scales, as well as a comprehensive self-sustained mechanism of the reattachment unsteadiness in shock wave/boundary layer interaction, are investigated in this study. Direct numerical simulations reveal that the reattachment unsteadiness of a Mach 7.7 laminar inflow causes over $26\,\%$ variation in wall friction and up to $20\,\%$ fluctuation in heat flux at the reattachment of the separation bubble. A statistical approach, based on the local reattachment upstream movement, is proposed to identify the spanwise and temporal scales of reattachment unsteadiness. It is found that two different types, i.e. self-induced and random processes, dominate different regions of reattachment. A self-sustained mechanism is proposed to comprehend the reattachment unsteadiness in the self-induced region. The intrinsic instability of the separation bubble transports vorticity downstream, resulting in an inhomogeneous reattachment line, which gives rise to baroclinic production of quasi-streamwise vortices. The pairing of these vortices initiates high-speed streaks and shifts the reattachment line upstream. Ultimately, viscosity dissipates the vortices, triggering instability and a new cycle of reattachment unsteadiness. The temporal scale and maximum vorticity are estimated with the self-sustained mechanism via order-of-magnitude analysis of the enstrophy. The advection speed of friction, derived from the assumption of coherent structures advecting with a Blasius-type boundary layer, aligns with the numerical findings.- 4 November 2024
- Published by Cambridge University Press (CUP) in Journal of Fluid Mechanics
- Vol. 998, A54
Open AccessScales and self-sustained mechanism of reattachment unsteadiness in separated shock wave/boundary layer interaction
The spatio-temporal scales, as well as a comprehensive self-sustained mechanism of the reattachment unsteadiness in shock wave/boundary layer interaction, are investigated in this study. Direct numerical simulations reveal that the reattachment unsteadiness of a Mach 7.7 laminar inflow causes over $26\,\%$ variation in wall friction and up to $20\,\%$ fluctuation in heat flux at the reattachment of the separation bubble. A statistical approach, based on the local reattachment upstream movement, is proposed to identify the spanwise and temporal scales of reattachment unsteadiness. It is found that two different types, i.e. self-induced and random processes, dominate different regions of reattachment. A self-sustained mechanism is proposed to comprehend the reattachment unsteadiness in the self-induced region. The intrinsic instability of the separation bubble transports vorticity downstream, resulting in an inhomogeneous reattachment line, which gives rise to baroclinic production of quasi-streamwise vortices. The pairing of these vortices initiates high-speed streaks and shifts the reattachment line upstream. Ultimately, viscosity dissipates the vortices, triggering instability and a new cycle of reattachment unsteadiness. The temporal scale and maximum vorticity are estimated with the self-sustained mechanism via order-of-magnitude analysis of the enstrophy. The advection speed of friction, derived from the assumption of coherent structures advecting with a Blasius-type boundary layer, aligns with the numerical findings. - Open Access
Local-Energy-Conservation-Based Decomposition Method for Wall Friction and Heat Flux
A novel decomposition method that adheres to both local time translation symmetry and spatial rotational symmetry is proposed in this study, thereby extending the limitations of existing methods, which are typically restricted to quasi-two-dimensional configurations. Grounded in the FIK and RD identities, this method provides a clear physical and reliable interpretation suitable for arbitrary-curvature profiles. Utilizing this method, an analysis of the aerothermodynamic characteristics of the bistable states of curved compression ramp flows was conducted. The results reveal that the generation of undisturbed and peak is dominated by viscous dissipation. Specifically, flow separation happens when all of the energy input from the work exerted by the adverse pressure gradient (APG) is insufficient to be entirely converted into local viscous dissipation and kinetic energy. Furthermore, the propensity for flow separation at higher wall temperatures is firstly elucidated quantitatively from the perspective of the work by the APG. The peak heat flux is predominantly triggered by the work of viscous stress, with the secondary contribution from energy transport playing a more significant role in the generation of the peak heat flux of the separation state than that of the attachment state.Open AccessLocal-Energy-Conservation-Based Decomposition Method for Wall Friction and Heat Flux
A novel decomposition method that adheres to both local time translation symmetry and spatial rotational symmetry is proposed in this study, thereby extending the limitations of existing methods, which are typically restricted to quasi-two-dimensional configurations. Grounded in the FIK and RD identities, this method provides a clear physical and reliable interpretation suitable for arbitrary-curvature profiles. Utilizing this method, an analysis of the aerothermodynamic characteristics of the bistable states of curved compression ramp flows was conducted. The results reveal that the generation of undisturbed and peak is dominated by viscous dissipation. Specifically, flow separation happens when all of the energy input from the work exerted by the adverse pressure gradient (APG) is insufficient to be entirely converted into local viscous dissipation and kinetic energy. Furthermore, the propensity for flow separation at higher wall temperatures is firstly elucidated quantitatively from the perspective of the work by the APG. The peak heat flux is predominantly triggered by the work of viscous stress, with the secondary contribution from energy transport playing a more significant role in the generation of the peak heat flux of the separation state than that of the attachment state. - Open Access
The bistability of curved compression ramp flows
This paper investigates the bistability of curved compression ramp (CCR) flows. It reports that both separated and attached states can be stably established even for the same boundary conditions, revealing that the ultimate stable states of CCR flows also depend on the initial conditions and evolutionary history. Firstly, we design a thought experiment involving two establishment routes of CCR flows, constructing two distinct-different stable states, respectively. Subsequently, three-dimensional direct numerical simulations are meticulously performed to instantiate the thought experiment, verifying the existence of the bistable states. Finally, we compare the pressure, wall friction, and heat flux distributions under two stable states. As a canonical type of Shock wave-Boundary layer interactions, local CCR flows often appear on aircraft, hence the bistability will certainly bring noteworthy changes to the global aerothermodynamic characteristics, which supersonic/hypersonic flight has to deal with.
Open AccessThe bistability of curved compression ramp flows
This paper investigates the bistability of curved compression ramp (CCR) flows. It reports that both separated and attached states can be stably established even for the same boundary conditions, revealing that the ultimate stable states of CCR flows also depend on the initial conditions and evolutionary history. Firstly, we design a thought experiment involving two establishment routes of CCR flows, constructing two distinct-different stable states, respectively. Subsequently, three-dimensional direct numerical simulations are meticulously performed to instantiate the thought experiment, verifying the existence of the bistable states. Finally, we compare the pressure, wall friction, and heat flux distributions under two stable states. As a canonical type of Shock wave-Boundary layer interactions, local CCR flows often appear on aircraft, hence the bistability will certainly bring noteworthy changes to the global aerothermodynamic characteristics, which supersonic/hypersonic flight has to deal with.
- 1 December 2021
- Published by AIP Publishing in Physics of Fluids
- Vol. 33 (12) , 126106
Aerothermodynamic characteristics of hypersonic curved compression ramp flows with bistable states
The aerothermodynamic characteristics (including wall friction Cf, pressure pw, and heat flux St) in curved compression ramp (CCR) flows with bistable states are studied numerically and theoretically. Direct numerical simulations of bistable states of separation/attachment induced by variation of the turning angle , as well as the influence of inflow Mach number and wall temperature on dual-solution interval, are carried out. Distributions of wall friction, pressure and heat flux are analyzed. Further, the emergence of the first and second minima of Cf in the separation bubble is interpreted, which are dominated by the adverse pressure gradient induced by separation and reattachment shock, respectively. The present results and analysis indicate that the reversed-flow singularity of F. T. Smith (Proc. R. Soc. London. A: Math. Phys. Sci. 420, 21–52 (1988)] is less likely to occur in CCR flows. The prediction of pressure peak ppk of separation states confirms the model based on the minimum viscous dissipation theorem [Hu et al., Phys. Fluids 32(10), 101702 (2020)]. While the pressure overshoot pos can be analyzed by shock-polars with pressure match of compression and expansion process. The correlation between heat flux peak and pressure peak of both separation and attachment states is also discussed in terms of the classical power relation.- 1 December 2021
- Published by AIP Publishing in Physics of Fluids
- Vol. 33 (12) , 126106
Aerothermodynamic characteristics of hypersonic curved compression ramp flows with bistable states
The aerothermodynamic characteristics (including wall friction Cf, pressure pw, and heat flux St) in curved compression ramp (CCR) flows with bistable states are studied numerically and theoretically. Direct numerical simulations of bistable states of separation/attachment induced by variation of the turning angle , as well as the influence of inflow Mach number and wall temperature on dual-solution interval, are carried out. Distributions of wall friction, pressure and heat flux are analyzed. Further, the emergence of the first and second minima of Cf in the separation bubble is interpreted, which are dominated by the adverse pressure gradient induced by separation and reattachment shock, respectively. The present results and analysis indicate that the reversed-flow singularity of F. T. Smith (Proc. R. Soc. London. A: Math. Phys. Sci. 420, 21–52 (1988)] is less likely to occur in CCR flows. The prediction of pressure peak ppk of separation states confirms the model based on the minimum viscous dissipation theorem [Hu et al., Phys. Fluids 32(10), 101702 (2020)]. While the pressure overshoot pos can be analyzed by shock-polars with pressure match of compression and expansion process. The correlation between heat flux peak and pressure peak of both separation and attachment states is also discussed in terms of the classical power relation.- 1 October 2021
- Published by AIP Publishing in Physics of Fluids
- Vol. 33 (10) , 106108
Mechanism of separation hysteresis in curved compression ramp
A new spatial-related mechanism is proposed to understand separation hysteresis processes in curved compression ramp flows discovered recently [Hu et al., Phys. Fluids 32(11), 113601 (2020)]. Two separation hystereses, induced by variations of Mach number and wall temperature Tw, are investigated numerically. The two hystereses indicate that there must exist parameter intervals of Mach number and wall temperature , wherein both attachment and separation states can be established stably. The relationships between the aerodynamic characteristics (including wall friction, pressure and heat flux) and the shock wave configurations in these two hystereses are analyzed. Further, the adverse pressure gradient (APG) induced by the upstream separation process and APG induced by the downstream isentropic compression process are estimated by classic theories. The trend of boundary layer APG resistence is evaluated from the spatial distributions of the physical quantities such as the shape factor and the height of sonic line. With the stable conditions of separation and attachment, a self-consistent mechanism is obtained when Isb, Icw, and Ib have appropriate spatial distributions.- 1 October 2021
- Published by AIP Publishing in Physics of Fluids
- Vol. 33 (10) , 106108
Mechanism of separation hysteresis in curved compression ramp
A new spatial-related mechanism is proposed to understand separation hysteresis processes in curved compression ramp flows discovered recently [Hu et al., Phys. Fluids 32(11), 113601 (2020)]. Two separation hystereses, induced by variations of Mach number and wall temperature Tw, are investigated numerically. The two hystereses indicate that there must exist parameter intervals of Mach number and wall temperature , wherein both attachment and separation states can be established stably. The relationships between the aerodynamic characteristics (including wall friction, pressure and heat flux) and the shock wave configurations in these two hystereses are analyzed. Further, the adverse pressure gradient (APG) induced by the upstream separation process and APG induced by the downstream isentropic compression process are estimated by classic theories. The trend of boundary layer APG resistence is evaluated from the spatial distributions of the physical quantities such as the shape factor and the height of sonic line. With the stable conditions of separation and attachment, a self-consistent mechanism is obtained when Isb, Icw, and Ib have appropriate spatial distributions.- 8 February 2021
- Published by American Physical Society (APS) in Physical Review E
- Vol. 103 (2) , 023103
Mechanism of hysteresis in shock wave reflection
This paper reports on the mechanism of the hysteresis in the transition between regular and Mach shock wave reflections. We disclose that, for a given inflow Mach number, a stable reflection configuration should maintain the minimal dissipation. As the wedge angle varies, the set of the minimal dissipation points forms the valley lines in the dissipation landscape, and these valley lines compose the hysteresis loop. The saddle-nodes, intersections of the ridge line, and the valley lines are actually the transition points. Additionally, the predicted reflection configurations agree well with the experimental and numerical results, validating this theory.
- 8 February 2021
- Published by American Physical Society (APS) in Physical Review E
- Vol. 103 (2) , 023103
Mechanism of hysteresis in shock wave reflection
This paper reports on the mechanism of the hysteresis in the transition between regular and Mach shock wave reflections. We disclose that, for a given inflow Mach number, a stable reflection configuration should maintain the minimal dissipation. As the wedge angle varies, the set of the minimal dissipation points forms the valley lines in the dissipation landscape, and these valley lines compose the hysteresis loop. The saddle-nodes, intersections of the ridge line, and the valley lines are actually the transition points. Additionally, the predicted reflection configurations agree well with the experimental and numerical results, validating this theory.
- 1 November 2020
- Published by AIP Publishing in Physics of Fluids
- Vol. 32 (11) , 113601
Bistable states and separation hysteresis in curved compression ramp flows
The separation hysteresis of the boundary layer induced by the variation of the angle of attack (AOA) is observed and investigated numerically in curved compression ramp (CCR) flows. The occurrence of this new phenomenon is based on the bistable states of CCR flows even for the same free-stream and boundary conditions, indicating that the boundary layer’s state (attachment/separation) depends on its evolutionary history with AOA varying. Specifically, beginning with an attachment state, the boundary layer remains attached as AOA increases slowly and suddenly separates once AOA reaches a marginal angle αs. However, if we decrease AOA back from this angle, the boundary layer will not attach and remain separated until AOA reaches a small enough angle αa. The AOA extent [αa, αs] is called the dual-solution region. Three characteristic adverse pressure gradients (APGs), Isb, Ic, and Ib, are proposed to explain the existence of this dual-solution region, where Ic and Isb (Ic < Isb) are induced by the curved wall and the separation bubble, respectively, and Ib is the maximum APG that the boundary layer can resist. (i) When Ib > Isb, the flow must be attached, (ii) when Ib < Ic, the flow must be separated, and (iii) when Ic < Ib < Isb, both of these two states are theoretically possible. Since AOA-variation can make (i), (ii), and (iii) occur alternately, it could induce the separation hysteresis of CCR flows, which has been observed in this paper.- 1 November 2020
- Published by AIP Publishing in Physics of Fluids
- Vol. 32 (11) , 113601
Bistable states and separation hysteresis in curved compression ramp flows
The separation hysteresis of the boundary layer induced by the variation of the angle of attack (AOA) is observed and investigated numerically in curved compression ramp (CCR) flows. The occurrence of this new phenomenon is based on the bistable states of CCR flows even for the same free-stream and boundary conditions, indicating that the boundary layer’s state (attachment/separation) depends on its evolutionary history with AOA varying. Specifically, beginning with an attachment state, the boundary layer remains attached as AOA increases slowly and suddenly separates once AOA reaches a marginal angle αs. However, if we decrease AOA back from this angle, the boundary layer will not attach and remain separated until AOA reaches a small enough angle αa. The AOA extent [αa, αs] is called the dual-solution region. Three characteristic adverse pressure gradients (APGs), Isb, Ic, and Ib, are proposed to explain the existence of this dual-solution region, where Ic and Isb (Ic < Isb) are induced by the curved wall and the separation bubble, respectively, and Ib is the maximum APG that the boundary layer can resist. (i) When Ib > Isb, the flow must be attached, (ii) when Ib < Ic, the flow must be separated, and (iii) when Ic < Ib < Isb, both of these two states are theoretically possible. Since AOA-variation can make (i), (ii), and (iii) occur alternately, it could induce the separation hysteresis of CCR flows, which has been observed in this paper.- 1 October 2020
- Published by AIP Publishing in Physics of Fluids
- Vol. 32 (10) , 101702
Prediction of plateau and peak of pressure in a compression ramp flow with large separation
Based on the Helmholtz–Rayleigh minimal dissipation theorem, a theoretical model is proposed to predict both the plateau and peak of pressure in a compression ramp flow with large separation (CRFLS). Since the total dissipation of CRFLS is mainly contributed by the shock waves, the steady flow pattern can be determined by minimizing the shock dissipation among all the possible configurations. The predictions agree well with both experimental data and numerical simulations, covering a wide range of free-stream Mach number and ramp angle. This method could be applied to other flow systems where the dissipation is dominated by shock waves.
- 1 October 2020
- Published by AIP Publishing in Physics of Fluids
- Vol. 32 (10) , 101702
Prediction of plateau and peak of pressure in a compression ramp flow with large separation
Based on the Helmholtz–Rayleigh minimal dissipation theorem, a theoretical model is proposed to predict both the plateau and peak of pressure in a compression ramp flow with large separation (CRFLS). Since the total dissipation of CRFLS is mainly contributed by the shock waves, the steady flow pattern can be determined by minimizing the shock dissipation among all the possible configurations. The predictions agree well with both experimental data and numerical simulations, covering a wide range of free-stream Mach number and ramp angle. This method could be applied to other flow systems where the dissipation is dominated by shock waves.