CXChangliang Xu

Changliang Xu

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Changliang Xu has a total of 35 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Encouraging Guidance: Floating Target Tracking Technology for Airborne Robotic Arm Based on Reinforcement Learning

    by Jiying Wu, Zhong Yang, Haoze Zhuo, Changliang Xu, Luwei Liao, Danguo Cheng, Zhiyong Wang

    Aerial robots equipped with operational robotic arms are a powerful means of achieving aerial contact operations, and their core competitiveness lies in target tracking control at the end of the airborne robotic arm (ARA). In order to improve the learning efficiency and flexibility of the ARA control algorithm, this paper proposes the encouraging guidance of an actor–critic (Eg-ac) algorithm based on the actor–critic (AC) algorithm and applies it to the floating target tracking control of ARA. It can quickly lock in the exploration direction and achieve stable tracking without increasing the learning cost. Firstly, this paper establishes approximate functions, policy functions, and encouragement functions for the state value of ARA. Secondly, an adoption rate controller (ARC) module was designed based on the concept of heavy rewards and light punishments (HRLP). Then, the kinematic and dynamic models of ARA were established. Finally, simulation was conducted using stable baselines3 (SB3). The experimental results show that, under the same computational cost, the convergence speed of the Eg-ac is improved by 21.4% compared to deep deterministic policy gradient (DDPG). Compared with soft actor–critic (SAC) and DDPG, Eg-ac has improved learning efficiency by at least 20% and has a more agile and stable floating target tracking effect.


  • Open Access

    A Novel Nonsingular Fast Terminal Sliding Mode Control with Sliding Mode Disturbance Observer for Permanent Magnet Synchronous Motor Servo Control

    by Difen Shi, Kai Bodemann, Yao Wang, Changliang Xu, Lulu Liu, Chungui Feng

    This article proposes a novel nonsingular fast terminal sliding mode control (N-NFTSMC) with a sliding mode disturbance observer (SDOB) for permanent magnet synchronous motor (PMSM) servo control. Firstly, to reduce the chattering issue, a new sliding mode reaching law (NSRL) is proposed for the N-NFTSMC. Secondly, to further improve the dynamic tracking accuracy, we introduce a sliding disturbance observer to estimate unknown disturbances for feedforward compensation. Comparative simulations via Matlab/Simulink 2018 are conducted using the traditional NFTSMC and N-NFTSMC; the step simulation results show that the chattering phenomenon was suppressed well via the N-NFTSMC scheme. The sine wave tracking simulation proves that the N-NFTSMC has better dynamic tracking performance when compared with traditional NFTSMC. Finally, we carry out experiments to validate that the N-NFTSMC adequately suppresses the chattering issue and possesses better anti-disturbance performance.


  • Open Access

    A Supervised Reinforcement Learning Algorithm for Controlling Drone Hovering

    by Jiying Wu, Zhong Yang, Haoze Zhuo, Changliang Xu, Chi Zhang, Naifeng He, Luwei Liao, Zhiyong Wang

    The application of drones carrying different devices for aerial hovering operations is becoming increasingly widespread, but currently there is very little research relying on reinforcement learning methods for hovering control, and it has not been implemented on physical machines. Drone’s behavior space regarding hover control is continuous and large-scale, making it difficult for basic algorithms and value-based reinforcement learning (RL) algorithms to have good results. In response to this issue, this article applies a watcher-actor-critic (WAC) algorithm to the drone’s hover control, which can quickly lock the exploration direction and achieve high robustness of the drone’s hover control while improving learning efficiency and reducing learning costs. This article first utilizes the actor-critic algorithm based on behavioral value Q (QAC) and the deep deterministic policy gradient algorithm (DDPG) for drone hover control learning. Subsequently, an actor-critic algorithm with an added watcher is proposed, in which the watcher uses a PID controller with parameters provided by a neural network as the dynamic monitor, transforming the learning process into supervised learning. Finally, this article uses a classic reinforcement learning environment library, Gym, and a current mainstream reinforcement learning framework, PARL, for simulation, and deploys the algorithm to a practical environment. A multi-sensor fusion strategy-based autonomous localization method for unmanned aerial vehicles is used for practical exercises. The simulation and experimental results show that the training episodes of WAC are reduced by 20% compared to the DDPG and 55% compared to the QAC, and the proposed algorithm has a higher learning efficiency, faster convergence speed, and smoother hovering effect compared to the QAC and DDPG.


  • Open Access

    Distributed Fixed-Time Attitude Consensus Tracking Control for Multiple Rigid-Bodies Subject to Unknown Uncertainties

    by Sen Jiang, Zhong Yang, Yuxin Gao, Hao Xu, Changliang Xu

    This paper investigates the problem of fixed-time attitude consensus tracking control for a team of multiple rigid-bodies in the presence of unknown uncertainties. A robust exact distributed fixed-time observer is presented to estimate velocity state of the virtual-leader for the followers that could not directly access information of the virtual-leader. Subsequently, a novel distributed fixed-time consensus tracking control law is proposed, by which consensus tracking for a team of multiple rigid-bodies could be achieved in a fixed-time regardless of any initial system state. When the proposed control scheme is applied, effects of time-varying disturbances acting on each follower could drastically be attenuated. Analysis on stability of the closed-loop system is rigorously given and effectiveness of the proposed control scheme is verified by numerical simulations.

  • Open Access

    A New Trajectory Tracking Control Method for Fully Electrically Driven Quadruped Robot

    by Yulong You, Zhong Yang, Teng’an Zou, Yaoyu Sui, Changliang Xu, Chi Zhang, Hao Xu, Zhao Zhang, Jiaming Han

    To improve the accuracy of tracking the trunk center-of-mass (CoM) trajectory and foot-end trajectory in a fully electrically driven quadruped robot, an efficient and practical new trajectory tracking control method is designed. The proposed trajectory tracking method is mainly divided into trunk balance controller (TBC) and swing leg controller (SLC). In TBC, a quadruped robot dynamics model is developed to find the optimal foot-end force that follows the trunk CoM trajectory based on the model predictive control (MPC) principle. In SLC, the Bessel curve is planned as the desired trajectory at the foot-end, while the desired trajectory is tracked by a virtual spring-damping element driving the foot-end, meanwhile, the radial basis function neural network (RBFNN) is applied for supervisory control to improve the control performance for the system. The experimental results show that the control method can modify the robot’s foot-end trajectory tracking effect, so that the stability error can be eliminated and the robustness of the controller can be improved, meanwhile, the linear and circular trajectory for CoM can be tracked accurately and quickly.


  • Open Access

    A Novel Aerial Manipulator with Front Cutting Effector: Modeling, Control, and Evaluation

    by Hao Xu, Zhong Yang, Guoxing Zhou, Luwei Liao, Changliang Xu, Jiying Wu, Qiuyan Zhang, Chi Zhang

    This paper proposes a novel aerial manipulator with front cutting effector (AMFCE) to address the aerial physical interaction (APhI) problem. First, the system uncertainty and external disturbance during the system movement and contact operation are estimated by modeling the entire robot and contact position. Next, based on the established model, the nonlinear disturbance observer (NDO) is used to estimate and compensate the unknown external disturbance of the system and the uncertainty of the model parameters in real time. Then, the nonsingular terminal synovial membrane control method is used to suppress the part that is difficult to estimate. Finally, a controller which is suitable for the movement and operation of the entire system is designed. The controller’s performance is verified through experiments, and the results show that the design, modeling, and control of the entire system can achieve the APhI.


  • Open Access

    Model Predictive Control for an Aerial Tree‐Pruning Robot Based on Alternating Direction Method of Multipliers

    by Changliang Xu, Zhong Yang, Hao Xu, Qiuyan Zhang, Dongsheng Zhou, Kaiwen Lu, Jiaming Han, Luwei Liao

    Obstacles of some trees within the electric power transmission line channel are of great threat to the electricity supply. Nowadays, the tasks of clearing threatening tree branches are still mostly operated by hand and simple tools. In this article, an aerial tree‐pruning robot with a novel structure is designed to improve the pruning operation efficiency and enhance the safety of the staff. However, the long arm of the pruning tool results in much higher rotational inertia of the robot, which brings difficulties for the robot to remain stable. Therefore, a control scheme based on model predictive control is proposed for the aerial tree‐pruning robot and to deal with an uncertain system during the pruning operation period. One of the main contributions is that an ADMM (alternating direction method of multipliers) algorithm that solves the constrained QP (quadratic programming) is adopted to implement the model predictive control on embedded computers with limited computational power. The dynamic model of the pruning robot is firstly presented. Then, the control scheme of MPC for the pruning robot is presented. Moreover, the QP problem of robot control is addressed with ADMM. Finally, simulation experiments of attitude tracking as well as the antidisturbances capability verification have been conducted. Results for the system of aerial tree‐pruning robot are given to demonstrate the effectiveness of the developed attitude tracking control scheme using ADMM‐based MPC.


  • Open Access

    Design and Control of a Deformable Trees-Pruning Aerial Robot

    by Changliang Xu, Zhong Yang, Zhao Zhang, Hao Xu, Jiying Wu, Dongsheng Zhou, Luwei Liao, Qiuyan Zhang

    Tree branches near the electric power transmission lines are of great threat to the electricity supply. Nowadays, the tasks of clearing threatening tree branches are still mostly operated by hand and simple tools. Traditional structures of the multirotor aerial robot have the problem of fixed structure and limited performance, which affects the stability and efficiency of pruning operation. In this article, in order to obtain better environmental adaptability, an active deformable trees-pruning aerial robot is presented. The deformation of the aerial robot is implemented through two ways, arm telescopic and folding. In order to suppress the influence of internal and external disturbances on the system, Active Disturbance Rejection Control (ADRC) technology is adopted to build the flight controller. Firstly, active deformation aerial robot structure is given, followed by system dynamic model establishment under wind disturbance using the Newton–Euler method. Also, the analysis of the gusts influence on the system is considered. Then, the active deformation aerial robot system is decoupled into a combination of six SISO systems, so that a disturbance rejection controller is designed. Finally, the expanded state observer and the nonlinear state error feedback law are used to inspect and compensate the disturbance. Simulation results of attitude and position tracking as well as the antidisturbance capability show that the active deformation aerial robot with the ADRC flight controller designed in this paper has excellent attitude control capabilities during flight and trees-pruning operation.