Luwei Liao
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Luwei Liao has a total of 54 co-authors. Here are the top co-authors by number of shared publications:
- Zhong Yang
Nanjing University of Aeronautics and Astronautics
15 shared publications - Haoze Zhuo
College of Automation Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing 211106, China
8 shared publications - Jiying Wu
College of Automation Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing 211106, China
7 shared publications - Changliang Xu
College of Electronic Engineering, Nanjing Xiaozhuang University, Nanjing 211171, China
5 shared publications - Chi Zhang
College of Automation Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing 211106, China
5 shared publications - Nuo Xu
College of Automation Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing 211106, China
5 shared publications
Latest Publications
- 2 April 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. PP (02780046) , 1-12
Decoupled Large-Pitch Maneuvers of a 2DOF Thrust-Vectoring Bicopter via Quaternion Finite-Time Control and Dynamic Control Allocation
Multirotors are evolving from passive observation platforms to active interaction tools. Therefore, the demand for multirotors omnidirectional maneuverability in complex, nonlevel environments has been increasing. Traditional under-actuated multirotors and single-degree-of-freedom thrust-vectoring bicopter suffer from inherent pitch-longitudinal coupling issues. To overcome these limitations, this article proposes a novel two-degree-of-freedom thrust-vectoring bicopter, abbreviated as 2DOF-TVB, where the design can realize the pitch-longitudinal decoupling of the airframe. A singularity-free quaternion-based dynamic model is established to accurately describe large-attitude maneuvers. To address actuator redundancy, inherent center-oestimates and compensates CoG uncertaintyf-gravity uncertainty, and disturbance issues, a hierarchical control architecture was developed, and finite-time stability was analyzed by Lyapunov analysis. This architecture incorporates a real-time constrained dynamic control allocation to ensure feasible actuation under limits, together with the nonsingular fast terminal sliding mode control using the quaternion-based higher order sliding mode observer that mitigates external disturbances and CoG offset uncertainties. Experimental results validated its stable $\boldsymbol{\pm 90^{\circ}}$ pitch hovering and vertical wall adhesion capabilities, demonstrating its exceptional maneuverability and robustness.
- 2 April 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. PP (02780046) , 1-12
Decoupled Large-Pitch Maneuvers of a 2DOF Thrust-Vectoring Bicopter via Quaternion Finite-Time Control and Dynamic Control Allocation
Multirotors are evolving from passive observation platforms to active interaction tools. Therefore, the demand for multirotors omnidirectional maneuverability in complex, nonlevel environments has been increasing. Traditional under-actuated multirotors and single-degree-of-freedom thrust-vectoring bicopter suffer from inherent pitch-longitudinal coupling issues. To overcome these limitations, this article proposes a novel two-degree-of-freedom thrust-vectoring bicopter, abbreviated as 2DOF-TVB, where the design can realize the pitch-longitudinal decoupling of the airframe. A singularity-free quaternion-based dynamic model is established to accurately describe large-attitude maneuvers. To address actuator redundancy, inherent center-oestimates and compensates CoG uncertaintyf-gravity uncertainty, and disturbance issues, a hierarchical control architecture was developed, and finite-time stability was analyzed by Lyapunov analysis. This architecture incorporates a real-time constrained dynamic control allocation to ensure feasible actuation under limits, together with the nonsingular fast terminal sliding mode control using the quaternion-based higher order sliding mode observer that mitigates external disturbances and CoG offset uncertainties. Experimental results validated its stable $\boldsymbol{\pm 90^{\circ}}$ pitch hovering and vertical wall adhesion capabilities, demonstrating its exceptional maneuverability and robustness.
- Open Access
Risk-Aware Adaptive Safety Margins for Model Predictive Control with Orientation–Motion Coupled Barrier Functions in Dynamic Environments
Safe navigation in dynamic environments remains challenging because classical distance-based constraints ignore the coupling between a robot’s translational motion and attitude dynamics, and fixed safety margins are either over-conservative or risky under varying uncertainty and approach speed. This paper presents a Risk-Aware Model Predictive Control (RA-MPC) framework that addresses both limitations through two integrated components. First, we introduce Orientation–Motion Coupled Control Barrier Functions (O-MCBFs) that enforce unified safety constraints linking collision avoidance with attitude stability limits, preventing dangerous pose configurations during dynamic obstacle avoidance. Second, we develop Risk-Aware Adaptive Margins (RAAMs) that compute time-varying safety buffers based on relative velocity, robot braking capability, and prediction uncertainty, enabling context-dependent safety–efficiency trade-offs without manual parameter tuning. The proposed method integrates these components into a quadratic programming formulation within MPC, ensuring real-time computational tractability. Experimental results demonstrate higher success rates, smoother trajectories, and improved progress toward the goal, with no observed safety violations under the tested conditions. These findings indicate that coupling pose-space safety with risk-adaptive margins provides a principled and practical path to safe and efficient navigation in dynamic scenes.
Open AccessRisk-Aware Adaptive Safety Margins for Model Predictive Control with Orientation–Motion Coupled Barrier Functions in Dynamic Environments
Safe navigation in dynamic environments remains challenging because classical distance-based constraints ignore the coupling between a robot’s translational motion and attitude dynamics, and fixed safety margins are either over-conservative or risky under varying uncertainty and approach speed. This paper presents a Risk-Aware Model Predictive Control (RA-MPC) framework that addresses both limitations through two integrated components. First, we introduce Orientation–Motion Coupled Control Barrier Functions (O-MCBFs) that enforce unified safety constraints linking collision avoidance with attitude stability limits, preventing dangerous pose configurations during dynamic obstacle avoidance. Second, we develop Risk-Aware Adaptive Margins (RAAMs) that compute time-varying safety buffers based on relative velocity, robot braking capability, and prediction uncertainty, enabling context-dependent safety–efficiency trade-offs without manual parameter tuning. The proposed method integrates these components into a quadratic programming formulation within MPC, ensuring real-time computational tractability. Experimental results demonstrate higher success rates, smoother trajectories, and improved progress toward the goal, with no observed safety violations under the tested conditions. These findings indicate that coupling pose-space safety with risk-adaptive margins provides a principled and practical path to safe and efficient navigation in dynamic scenes.
- Open Access
Balancing Efficiency and Fairness: An Iterative Exchange Framework for Multi-UAV Cooperative Path Planning
Multi-UAV cooperative path planning (MUCPP) is a fundamental problem in multi-agent systems, aiming to generate collision-free trajectories for a team of unmanned aerial vehicles (UAVs) to complete distributed tasks efficiently. A key challenge lies in achieving both efficiency, by minimizing total mission cost, and fairness, by balancing the workload among UAVs to avoid overburdening individual agents. This paper presents a novel Iterative Exchange Framework for MUCPP, balancing efficiency and fairness through iterative task exchanges and path refinements. The proposed framework formulates a composite objective that combines the total mission distance and the makespan, and iteratively improves the solution via local exchanges under feasibility and safety constraints. For each UAV, collision-free trajectories are generated using A* search over a terrain-aware configuration space. Comprehensive experiments on multiple terrain datasets demonstrate that the proposed method consistently achieves superior trade-offs between total distance and makespan compared to existing baselines.
Open AccessBalancing Efficiency and Fairness: An Iterative Exchange Framework for Multi-UAV Cooperative Path Planning
Multi-UAV cooperative path planning (MUCPP) is a fundamental problem in multi-agent systems, aiming to generate collision-free trajectories for a team of unmanned aerial vehicles (UAVs) to complete distributed tasks efficiently. A key challenge lies in achieving both efficiency, by minimizing total mission cost, and fairness, by balancing the workload among UAVs to avoid overburdening individual agents. This paper presents a novel Iterative Exchange Framework for MUCPP, balancing efficiency and fairness through iterative task exchanges and path refinements. The proposed framework formulates a composite objective that combines the total mission distance and the makespan, and iteratively improves the solution via local exchanges under feasibility and safety constraints. For each UAV, collision-free trajectories are generated using A* search over a terrain-aware configuration space. Comprehensive experiments on multiple terrain datasets demonstrate that the proposed method consistently achieves superior trade-offs between total distance and makespan compared to existing baselines.
- 21 June 2025
- Published by Elsevier in Robotics and Autonomous Systems
- Vol. 193
Transformer-based aerial robot tracking system in environments with wind disturbances
- 21 June 2025
- Published by Elsevier in Robotics and Autonomous Systems
- Vol. 193
Transformer-based aerial robot tracking system in environments with wind disturbances
- 4 June 2025
- Published by Elsevier in Control Engineering Practice
- Vol. 164
Design of an adaptive MPC control system for unmanned ground vehicle based on FP-ADMM and RBFNN
- 4 June 2025
- Published by Elsevier in Control Engineering Practice
- Vol. 164
Design of an adaptive MPC control system for unmanned ground vehicle based on FP-ADMM and RBFNN
- 27 February 2025
- Published by IOP Publishing in Bioinspiration & Biomimetics
- Vol. 20 (2) , 026023
Design and implementation of an independent-drive bionic dragonfly robot
Bionic flapping wing robots achieve flight by imitating animal flapping wings, which are safe, flexible, and efficient. Their practicality and human-machine symbiosis in narrow and complex environments are better than traditional fixed-wing or multirotor drones, indicating broader application potential. By systematic and biomimetic methods, a bionic dragonfly robot with four independent drive flapping wings, called DFly-I, was designed. Firstly, the mechanical structure of the robot was introduced, especially the fluttering structure and the wing structure. Then, a novel motion controller utilizing multi-channel field-oriented control (FOC) is proposed for its motion mechanism, which relies on four sets of brushless DC motors based on FOC control and four sets of servos to achieve independent control of the flapping speed, rhythm, and angle of the four flapping wings. In addition, the system model is analyzed, and based on this, the robot motion and posture control are realized by a proportional–integral–derivative and active disturbance rejection based controller. Lastly, a physical prototype was made, and its feasibility was verified through flight experiments in indoor venues.
- 27 February 2025
- Published by IOP Publishing in Bioinspiration & Biomimetics
- Vol. 20 (2) , 026023
Design and implementation of an independent-drive bionic dragonfly robot
Bionic flapping wing robots achieve flight by imitating animal flapping wings, which are safe, flexible, and efficient. Their practicality and human-machine symbiosis in narrow and complex environments are better than traditional fixed-wing or multirotor drones, indicating broader application potential. By systematic and biomimetic methods, a bionic dragonfly robot with four independent drive flapping wings, called DFly-I, was designed. Firstly, the mechanical structure of the robot was introduced, especially the fluttering structure and the wing structure. Then, a novel motion controller utilizing multi-channel field-oriented control (FOC) is proposed for its motion mechanism, which relies on four sets of brushless DC motors based on FOC control and four sets of servos to achieve independent control of the flapping speed, rhythm, and angle of the four flapping wings. In addition, the system model is analyzed, and based on this, the robot motion and posture control are realized by a proportional–integral–derivative and active disturbance rejection based controller. Lastly, a physical prototype was made, and its feasibility was verified through flight experiments in indoor venues.
- Open Access
Encouraging Guidance: Floating Target Tracking Technology for Airborne Robotic Arm Based on Reinforcement Learning
Aerial robots equipped with operational robotic arms are a powerful means of achieving aerial contact operations, and their core competitiveness lies in target tracking control at the end of the airborne robotic arm (ARA). In order to improve the learning efficiency and flexibility of the ARA control algorithm, this paper proposes the encouraging guidance of an actor–critic (Eg-ac) algorithm based on the actor–critic (AC) algorithm and applies it to the floating target tracking control of ARA. It can quickly lock in the exploration direction and achieve stable tracking without increasing the learning cost. Firstly, this paper establishes approximate functions, policy functions, and encouragement functions for the state value of ARA. Secondly, an adoption rate controller (ARC) module was designed based on the concept of heavy rewards and light punishments (HRLP). Then, the kinematic and dynamic models of ARA were established. Finally, simulation was conducted using stable baselines3 (SB3). The experimental results show that, under the same computational cost, the convergence speed of the Eg-ac is improved by 21.4% compared to deep deterministic policy gradient (DDPG). Compared with soft actor–critic (SAC) and DDPG, Eg-ac has improved learning efficiency by at least 20% and has a more agile and stable floating target tracking effect.
Open AccessEncouraging Guidance: Floating Target Tracking Technology for Airborne Robotic Arm Based on Reinforcement Learning
Aerial robots equipped with operational robotic arms are a powerful means of achieving aerial contact operations, and their core competitiveness lies in target tracking control at the end of the airborne robotic arm (ARA). In order to improve the learning efficiency and flexibility of the ARA control algorithm, this paper proposes the encouraging guidance of an actor–critic (Eg-ac) algorithm based on the actor–critic (AC) algorithm and applies it to the floating target tracking control of ARA. It can quickly lock in the exploration direction and achieve stable tracking without increasing the learning cost. Firstly, this paper establishes approximate functions, policy functions, and encouragement functions for the state value of ARA. Secondly, an adoption rate controller (ARC) module was designed based on the concept of heavy rewards and light punishments (HRLP). Then, the kinematic and dynamic models of ARA were established. Finally, simulation was conducted using stable baselines3 (SB3). The experimental results show that, under the same computational cost, the convergence speed of the Eg-ac is improved by 21.4% compared to deep deterministic policy gradient (DDPG). Compared with soft actor–critic (SAC) and DDPG, Eg-ac has improved learning efficiency by at least 20% and has a more agile and stable floating target tracking effect.
- 13 December 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- Vol. 10 (2) , 1361-1368
Flybot: A Dual Active Wheel Hybrid Land-Air Robot With Five-Link Leg Joints
Small land-air robots with rapid response and field operation capabilities hold significant potential for emergency rescue and field exploration applications. However, achieving stable and efficient mode transitions, along with effective terrain adaptability, remains a challenge. This letter presents a novel land-air robot, Flybot, which combines a bicopter UAV with a dual active-wheel, self-balancing wheel-legged base. Unlike traditional air-ground robots, this paper designs a single-drive, five-link leg structure that enhances lateral stability and terrain adaptability. By optimizing the five-link joint, we minimize energy consumption in ground mode, resulting in improved efficiency. Additionally, this paper establishes a hybrid dynamics model to describe Flybot's mode transitions and introduces a novel hybrid transition controller that leverages acceleration and throttle data to determine transition states. Finally, the adaptability and reliability of the robot are verified by the ground obstacle crossing experiment and the air-ground continuous motion experiment in the field, and the effectiveness of the hybrid transition controller of the robot is demonstrated. The weight-to-power ratio of the Flybot in air mode is 5.18 g/W, and the weight-to-power ratio in ground mode is 309 g/W, indicating the high efficiency of the Flybot.
- 13 December 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- Vol. 10 (2) , 1361-1368
Flybot: A Dual Active Wheel Hybrid Land-Air Robot With Five-Link Leg Joints
Small land-air robots with rapid response and field operation capabilities hold significant potential for emergency rescue and field exploration applications. However, achieving stable and efficient mode transitions, along with effective terrain adaptability, remains a challenge. This letter presents a novel land-air robot, Flybot, which combines a bicopter UAV with a dual active-wheel, self-balancing wheel-legged base. Unlike traditional air-ground robots, this paper designs a single-drive, five-link leg structure that enhances lateral stability and terrain adaptability. By optimizing the five-link joint, we minimize energy consumption in ground mode, resulting in improved efficiency. Additionally, this paper establishes a hybrid dynamics model to describe Flybot's mode transitions and introduces a novel hybrid transition controller that leverages acceleration and throttle data to determine transition states. Finally, the adaptability and reliability of the robot are verified by the ground obstacle crossing experiment and the air-ground continuous motion experiment in the field, and the effectiveness of the hybrid transition controller of the robot is demonstrated. The weight-to-power ratio of the Flybot in air mode is 5.18 g/W, and the weight-to-power ratio in ground mode is 309 g/W, indicating the high efficiency of the Flybot.
- Open Access
Quaternion-Based Non-Singular Terminal Sliding Mode Control of Quadrotor with a Two-Degree-of-Freedom Deformable Arm for Narrow Environments
Conventional multi-rotors with limited deformation capability are unable to meet the traversal capability of complex and narrow environments. In order to solve the above problems, a novel type of deformable quadrotor with a two-degree-of-freedom arm, named QTDA, is proposed. Firstly, the overall structural design of the QTDA is introduced, and its movement strategy is analyzed. Secondly, the Newton–Euler equations based on a quaternion are utilized to model the omnidirectional dynamics and kinematics of the system. Next, to tackle the multi-actuator control problem, a pseudo-inverse control allocation method is developed, along with an analysis of control allocation singularities. Furthermore, non-singular terminal sliding mode position control law and non-singular terminal sliding mode attitude control law based on a quaternion are designed. Finally, simulations are conducted to verify the effectiveness of the proposed control methods. The results demonstrate the QTDA’s ability to traverse both narrow horizontal and vertical environments, thereby validating the effectiveness of the approach presented in this paper.
Open AccessQuaternion-Based Non-Singular Terminal Sliding Mode Control of Quadrotor with a Two-Degree-of-Freedom Deformable Arm for Narrow Environments
Conventional multi-rotors with limited deformation capability are unable to meet the traversal capability of complex and narrow environments. In order to solve the above problems, a novel type of deformable quadrotor with a two-degree-of-freedom arm, named QTDA, is proposed. Firstly, the overall structural design of the QTDA is introduced, and its movement strategy is analyzed. Secondly, the Newton–Euler equations based on a quaternion are utilized to model the omnidirectional dynamics and kinematics of the system. Next, to tackle the multi-actuator control problem, a pseudo-inverse control allocation method is developed, along with an analysis of control allocation singularities. Furthermore, non-singular terminal sliding mode position control law and non-singular terminal sliding mode attitude control law based on a quaternion are designed. Finally, simulations are conducted to verify the effectiveness of the proposed control methods. The results demonstrate the QTDA’s ability to traverse both narrow horizontal and vertical environments, thereby validating the effectiveness of the approach presented in this paper.