OHOliver Hartwig

Oliver Hartwig

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Oliver Hartwig has a total of 98 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Impact of Strain in Free‐Standing PtSe 2 in Scalable 2D MEMS

    by Stefan Heiserer, Natalie Galfe, Michael Loibl, Maximilian Wagner, Oliver Hartwig, Simon Schlosser, Silke Boche, William Thornley, Nick Clark, Kangho Lee, et al.

    2D layered materials such as PtSe 2 are prime candidates for next‐generation micro‐ and nano‐electro–mechanical systems (MEMS/NEMS), including piezoresistive sensors. However, due to difficulties in large‐scale synthesis and the inherent drawbacks associated with mechanical transfer of 2D material films, scalable NEMS production remains challenging. In this work, we report a fabrication route for free‐standing, as‐grown 2D material channels of PtSe 2 with controlled dimensions, avoiding a mechanical film transfer. The free‐standing devices provide a universal platform for strain engineering of 2D materials because tension can be easily controlled by application of a back‐contact voltage. Moreover, the piezoresistivity of PtSe 2 , together with the possibility of wafer‐scale synthesis at back‐end‐of‐line compatible growth temperatures, make it ideally suited for scalable incorporation into integrated circuits. Our measurements show that the material properties can be tuned via strain, which offers pathways for classically non‐gateable materials in electronic and photonic devices. Finite element simulations of representative free‐standing films elucidate the nano–mechanical properties of large‐scale‐grown, polycrystalline 2D materials under tensile strain and demonstrate the influence of polycrystallinity on the optical and electrical behavior.


  • Open Access

    Piezoresistive Platinum Diselenide Pressure Sensors with Reliable High Sensitivity and Their Integration into Complementary Metal-Oxide-Semiconductor Circuits

    by Sebastian Lukas, Nico Rademacher, Sofía Cruces, Michael Gross, Eva Desgué, Stefan Heiserer, Nikolas Dominik, Maximilian Prechtl, Oliver Hartwig, Cormac Ó Coileáin, et al.

    Membrane-based sensors are an important market for microelectromechanical systems (MEMS). Two-dimensional (2D) materials, with their low mass, are excellent candidates for suspended membranes to provide high sensitivity, small footprint sensors. The present work demonstrates pressure sensors employing large-scale-synthesized 2D platinum diselenide (PtSe2) films as piezoresistive membranes supported only by a thin polymer layer. We investigate three different synthesis methods with contrasting growth parameters and establish a reliable high yield fabrication process for suspended PtSe2/PMMA membranes across sealed cavities. The pressure sensors reproducibly display sensitivities above 6 × 10-4 kPa-1. We show that the sensitivity clearly depends on the membrane diameter and the piezoresistive gauge factor of the PtSe2 film. Reducing the total device size by decreasing the number of membranes within a device leads to a significant increase in the area-normalized sensitivity. This allows the manufacturing of pressure sensors with high sensitivity but a much smaller device footprint than the current state-of-the-art MEMS technology. We further integrate PtSe2 pressure sensors with CMOS technology, improving the technological readiness of PtSe2-based MEMS and NEMS devices.


  • Open Access

    Scalable Metal–Organic Chemical Vapor Deposition of High Quality PtSe2

    by Maximilian Prechtl, Stefan Heiserer, Marc Busch, Oliver Hartwig, Cormac Ó Coileáin, Tanja Stimpel‐Lindner, Kuanysh Zhussupbekov, Kangho Lee, Ainur Zhussupbekova, Samuel Berman, et al.

    Platinum diselenide (PtSe2), a 2D noble metal dichalcogenide, has recently received significant attention due to its outstanding properties. It undergoes a semimetal to semiconductor transition when thinned, offers a bandgap in the infrared range, and exhibits excellent stability in ambient conditions. These properties make it a prime active material in optoelectronic and chemical sensing devices. However, there is a high demand for a synthesis method that can produce large‐scale and reliable high‐quality PtSe2. In this study, the growth of PtSe2 is presented by metal–organic vapor deposition on a variety of substrates. Comprehensive Raman, X‐ray photoelectron, and X‐ray diffraction spectroscopy, as well as scanning tunneling microscopy characterization reveals the high quality of the deposited PtSe2. Domains within the films are found to be up to several hundreds of nanometers in size, and their highly ordered crystalline structure is evident from atomic‐scale measurements. Electrical characterization demonstrates improved conductivity relative to conventional synthesis methods. This study provides fundamental guidance for the scalable synthesis and implementation of high quality PtSe2 layers with controllable thickness, offering a key requirement for the implementation of PtSe2 in future applications.


  • Open Access

    3D Printing of Hierarchical Structures Made of Inorganic Silicon-Rich Glass Featuring Self-Forming Nanogratings

    by Po-Han Huang, Shiqian Chen, Oliver Hartwig, David E. Marschner, Georg S. Duesberg, Göran Stemme, Jiantong Li, Kristinn B. Gylfason, Frank Niklaus

    Hierarchical structures are abundant in nature, such as in the superhydrophobic surfaces of lotus leaves and the structural coloration of butterfly wings. They consist of ordered features across multiple size scales, and their advantageous properties have attracted enormous interest in wide-ranging fields including energy storage, nanofluidics, and nanophotonics. Femtosecond lasers, which are capable of inducing various material modifications, have shown promise for manufacturing tailored hierarchical structures. However, existing methods, such as multiphoton lithography and three-dimensional (3D) printing using nanoparticle-filled inks, typically involve polymers and suffer from high process complexity. Here, we demonstrate the 3D printing of hierarchical structures in inorganic silicon-rich glass featuring self-forming nanogratings. This approach takes advantage of our finding that femtosecond laser pulses can induce simultaneous multiphoton cross-linking and self-formation of nanogratings in hydrogen silsesquioxane. The 3D printing process combines the 3D patterning capability of multiphoton lithography and the efficient generation of periodic structures by the self-formation of nanogratings. We 3D-printed micro-supercapacitors with large surface areas and a high areal capacitance of 1 mF/cm2 at an ultrahigh scan rate of 50 V/s, thereby demonstrating the utility of our 3D printing approach for device applications in emerging fields such as energy storage.


  • Top Cited Papers
    Open Access

    Three-dimensional printing of silica glass with sub-micrometer resolution

    by Po-Han Huang, Miku Laakso, Pierre Edinger, Oliver Hartwig, Georg S. Duesberg, Lee-Lun Lai, Joachim Mayer, Johan Nyman, Carlos Errando-Herranz, Göran Stemme, et al.

    Silica glass is a high-performance material used in many applications such as lenses, glassware, and fibers. However, modern additive manufacturing of micro-scale silica glass structures requires sintering of 3D-printed silica-nanoparticle-loaded composites at ~1200 °C, which causes substantial structural shrinkage and limits the choice of substrate materials. Here, 3D printing of solid silica glass with sub-micrometer resolution is demonstrated without the need of a sintering step. This is achieved by locally crosslinking hydrogen silsesquioxane to silica glass using nonlinear absorption of sub-picosecond laser pulses. The as-printed glass is optically transparent but shows a high ratio of 4-membered silicon-oxygen rings and photoluminescence. Optional annealing at 900 °C makes the glass indistinguishable from fused silica. The utility of the approach is demonstrated by 3D printing an optical microtoroid resonator, a luminescence source, and a suspended plate on an optical-fiber tip. This approach enables promising applications in fields such as photonics, medicine, and quantum-optics.


  • Open Access

    Identification of Ubiquitously Present Polymeric Adlayers on 2D Transition Metal Dichalcogenides

    by Rita Tilmann, Cian Bartlam, Oliver Hartwig, Bartlomiej Tywoniuk, Nikolas Dominik, Conor P. Cullen, Lisanne Peters, Tanja Stimpel-Lindner, Niall McEvoy, Georg S. Duesberg

    The interest in 2D materials continues to grow across numerous scientific disciplines as compounds with unique electrical, optical, chemical, and thermal characteristics are being discovered. All these properties are governed by an all-surface nature and nanoscale confinement, which can easily be altered by extrinsic influences, such as defects, dopants or strain, adsorbed molecules, and contaminants. Here, we report on the ubiquitous presence of polymeric adlayers on top of layered transition metal dichalcogenides (TMDs). The atomically thin layers, not evident from common analytic methods, such as Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), or scanning electron microscopy (SEM), could be identified with highly resolved time-of-flight secondary ion mass spectrometry (TOF-SIMS). The layers consist of hydrocarbons, which preferentially adsorb to the hydrophobic van der Waals surfaces of TMDs, derived from the most common methods. Fingerprint fragmentation patterns enable us to identify certain polymers and link them to those used during preparation and storage of the TMDs. The ubiquitous presence of polymeric films on 2D materials has wide reaching implications for their investigation, processing, and applications. In this regard, we reveal the nature of polymeric residues after commonly used transfer procedures on MoS2 films and investigate several annealing procedures for their removal.


  • Open Access

    Ultrafast and Resist-Free Nanopatterning of 2D Materials by Femtosecond Laser Irradiation

    by Alessandro Enrico, Oliver Hartwig, Nikolas Dominik, Arne Quellmalz, Kristinn B. Gylfason, Georg S. Duesberg, Frank Niklaus, Göran Stemme

    The performance of two-dimensional (2D) materials is promising for electronic, photonic, and sensing devices since they possess large surface-to-volume ratios, high mechanical strength, and broadband light sensitivity. While significant advances have been made in synthesizing and transferring 2D materials onto different substrates, there is still the need for scalable patterning of 2D materials with nanoscale precision. Conventional lithography methods require protective layers such as resist or metals that can contaminate or degrade the 2D materials and deteriorate the final device performance. Current resist-free patterning methods are limited in throughput and typically require custom-made equipment. To address these limitations, we demonstrate the noncontact and resist-free patterning of platinum diselenide (PtSe2), molybdenum disulfide (MoS2), and graphene layers with nanoscale precision at high processing speed while preserving the integrity of the surrounding material. We use a commercial, off-the-shelf two-photon 3D printer to directly write patterns in the 2D materials with features down to 100 nm at a maximum writing speed of 50 mm/s. We successfully remove a continuous film of 2D material from a 200 μm × 200 μm substrate area in less than 3 s. Since two-photon 3D printers are becoming increasingly available in research laboratories and industrial facilities, we expect this method to enable fast prototyping of devices based on 2D materials across various research areas.


  • Open Access

    Highly conductive and long-term stable films from liquid-phase exfoliated platinum diselenide

    by Kangho Lee, Beata M. Szydłowska, Oliver Hartwig, Kevin Synnatschke, Bartlomiej Tywoniuk, Tomáš Hartman, Tijana Tomašević-Ilić, Cian P. Gabbett, Jonathan N. Coleman, Zdeněk Sofer, et al.

    Long-term stable gas sensors by tiled networks from LPE-PtSe2.


  • Open Access

    Stacking Polymorphism in PtSe2 Drastically Affects Its Electromechanical Properties

    by Roman Kempt, Sebastian Lukas, Oliver Hartwig, Maximilian Prechtl, Agnieszka Kuc, Thomas Brumme, Sha Li, Daniel Neumaier, Max C. Lemme, Georg S. Duesberg, et al.

    PtSe2 is one of the most promising materials for the next generation of piezoresistive sensors. However, the large‐scale synthesis of homogeneous thin films with reproducible electromechanical properties is challenging due to polycrystallinity. It is shown that stacking phases other than the 1T phase become thermodynamically available at elevated temperatures that are common during synthesis. It is shown that these phases can make up a significant fraction in a polycrystalline thin film and discuss methods to characterize them, including their Seebeck coefficients. Lastly, their gauge factors, which vary strongly and heavily impact the performance of a nanoelectromechanical device are estimated.


  • Open Access

    Correlating Nanocrystalline Structure with Electronic Properties in 2D Platinum Diselenide

    by Sebastian Lukas, Oliver Hartwig, Maximilian Prechtl, Giovanna Capraro, Jens Bolten, Alexander Meledin, Joachim Mayer, Daniel Neumaier, Satender Kataria, Georg S. Duesberg, et al.

    Platinum diselenide (PtSe2) is a 2D material with outstanding electronic and piezoresistive properties. The material can be grown at low temperatures in a scalable manner, which makes it extremely appealing for many potential electronics, photonics, and sensing applications. Here, the nanocrystalline structure of different PtSe2 thin films grown by thermally assisted conversion (TAC) is investigated and is correlated with their electronic and piezoresistive properties. Scanning transmission electron microscopy for structural analysis, X‐ray photoelectron spectroscopy (XPS) for chemical analysis, and Raman spectroscopy for phase identification are used. Electronic devices are fabricated using transferred PtSe2 films for electrical characterization and piezoresistive gauge factor measurements. The variations of crystallite size and their orientations are found to have a strong correlation with the electronic and piezoresistive properties of the films, especially the sheet resistivity and the effective charge carrier mobility. The findings may pave the way for tuning and optimizing the properties of TAC‐grown PtSe2 toward numerous applications.