Maximilian Prechtl
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Maximilian Prechtl has a total of 46 co-authors. Here are the top co-authors by number of shared publications:
- Georg Stefan Duesberg
Institute of Physics, University of the Bundeswehr Munich, 85579 Munich, Germany
6 shared publications - Max Christian Lemme
Chair of Electronic Devices, RWTH Aachen University, Aachen, Germany
4 shared publications - Oliver Hartwig
Institute of Physics Faculty of Electrical Power Systems and Information Technology and SENS Research Center University of the Bundeswehr Munich 85577 Neubiberg Germany
4 shared publications - Ainur Zhussupbekova
School of Chemistry, Trinity College Dublin, Dublin 2, Ireland
2 shared publications - Daniel Neumaier
AMO GmbH, Aachen, Germany
2 shared publications - Igor V. Shvets
Department School of Physics Institution Trinity College Dublin College Green Dublin 2 Ireland
2 shared publications
Latest Publications
- 28 January 2025
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 17 (9) , 5249-5258
Structural and electronic transition of layered PtSe 2 into non-layered PtSe
Metallic PtSe is obtained from thermal conversion of PtSe 2 grown by chemical vapor deposition, highlighting the significance of sub-stoichiometric phases within transition metal dichalcogenide films.
- 28 January 2025
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 17 (9) , 5249-5258
Structural and electronic transition of layered PtSe 2 into non-layered PtSe
Metallic PtSe is obtained from thermal conversion of PtSe 2 grown by chemical vapor deposition, highlighting the significance of sub-stoichiometric phases within transition metal dichalcogenide films.
- Open Access
- 21 October 2024
- Published by Wiley in Advanced Electronic Materials
- Vol. 11 (3)
Scalable Metal–Organic Chemical Vapor Deposition of High Quality PtSe2
Platinum diselenide (PtSe2), a 2D noble metal dichalcogenide, has recently received significant attention due to its outstanding properties. It undergoes a semimetal to semiconductor transition when thinned, offers a bandgap in the infrared range, and exhibits excellent stability in ambient conditions. These properties make it a prime active material in optoelectronic and chemical sensing devices. However, there is a high demand for a synthesis method that can produce large‐scale and reliable high‐quality PtSe2. In this study, the growth of PtSe2 is presented by metal–organic vapor deposition on a variety of substrates. Comprehensive Raman, X‐ray photoelectron, and X‐ray diffraction spectroscopy, as well as scanning tunneling microscopy characterization reveals the high quality of the deposited PtSe2. Domains within the films are found to be up to several hundreds of nanometers in size, and their highly ordered crystalline structure is evident from atomic‐scale measurements. Electrical characterization demonstrates improved conductivity relative to conventional synthesis methods. This study provides fundamental guidance for the scalable synthesis and implementation of high quality PtSe2 layers with controllable thickness, offering a key requirement for the implementation of PtSe2 in future applications.
- 21 October 2024
- Published by Wiley in Advanced Electronic Materials
- Vol. 11 (3)
Open AccessScalable Metal–Organic Chemical Vapor Deposition of High Quality PtSe2
Platinum diselenide (PtSe2), a 2D noble metal dichalcogenide, has recently received significant attention due to its outstanding properties. It undergoes a semimetal to semiconductor transition when thinned, offers a bandgap in the infrared range, and exhibits excellent stability in ambient conditions. These properties make it a prime active material in optoelectronic and chemical sensing devices. However, there is a high demand for a synthesis method that can produce large‐scale and reliable high‐quality PtSe2. In this study, the growth of PtSe2 is presented by metal–organic vapor deposition on a variety of substrates. Comprehensive Raman, X‐ray photoelectron, and X‐ray diffraction spectroscopy, as well as scanning tunneling microscopy characterization reveals the high quality of the deposited PtSe2. Domains within the films are found to be up to several hundreds of nanometers in size, and their highly ordered crystalline structure is evident from atomic‐scale measurements. Electrical characterization demonstrates improved conductivity relative to conventional synthesis methods. This study provides fundamental guidance for the scalable synthesis and implementation of high quality PtSe2 layers with controllable thickness, offering a key requirement for the implementation of PtSe2 in future applications.
- Open Access
- 2 June 2022
- Published by Wiley in Advanced Science
- Vol. 9 (22) , e2201272
Stacking Polymorphism in PtSe2 Drastically Affects Its Electromechanical Properties
PtSe2 is one of the most promising materials for the next generation of piezoresistive sensors. However, the large‐scale synthesis of homogeneous thin films with reproducible electromechanical properties is challenging due to polycrystallinity. It is shown that stacking phases other than the 1T phase become thermodynamically available at elevated temperatures that are common during synthesis. It is shown that these phases can make up a significant fraction in a polycrystalline thin film and discuss methods to characterize them, including their Seebeck coefficients. Lastly, their gauge factors, which vary strongly and heavily impact the performance of a nanoelectromechanical device are estimated.
- 2 June 2022
- Published by Wiley in Advanced Science
- Vol. 9 (22) , e2201272
Open AccessStacking Polymorphism in PtSe2 Drastically Affects Its Electromechanical Properties
PtSe2 is one of the most promising materials for the next generation of piezoresistive sensors. However, the large‐scale synthesis of homogeneous thin films with reproducible electromechanical properties is challenging due to polycrystallinity. It is shown that stacking phases other than the 1T phase become thermodynamically available at elevated temperatures that are common during synthesis. It is shown that these phases can make up a significant fraction in a polycrystalline thin film and discuss methods to characterize them, including their Seebeck coefficients. Lastly, their gauge factors, which vary strongly and heavily impact the performance of a nanoelectromechanical device are estimated.
- Open Access
- 16 August 2021
- Published by Wiley in Advanced Functional Materials
- Vol. 31 (46) , 2103936
Hybrid Devices by Selective and Conformal Deposition of PtSe2 at Low Temperatures
2D materials display very promising intrinsic material properties, with multiple applications in electronics, photonics, and sensing. In particular layered platinum diselenide has shown high potential due to its layer‐dependent tunable bandgap, low‐temperature growth, and high environmental stability. Here, the conformal and area selective (AS) low‐temperature growth of layered PtSe2 is presented defining a new paradigm for 2D material integration. The thermally‐assisted conversion of platinum which is deposited by AS atomic layer deposition to PtSe2 is demonstrated on various substrates with a distinct 3D topography. Further the viability of the approach is presented by successful on‐chip integration of hybrid semiconductor devices, namely by the manufacture of a highly sensitive ammonia sensors channel with 3D topography and fully integrated infrared‐photodetectors on silicon photonics waveguides. The presented methodologies of conformal and AS growth therefore lay the foundation for new design routes for the synthesis of more complex hybrid structures with 2D materials.
- 16 August 2021
- Published by Wiley in Advanced Functional Materials
- Vol. 31 (46) , 2103936
Open AccessHybrid Devices by Selective and Conformal Deposition of PtSe2 at Low Temperatures
2D materials display very promising intrinsic material properties, with multiple applications in electronics, photonics, and sensing. In particular layered platinum diselenide has shown high potential due to its layer‐dependent tunable bandgap, low‐temperature growth, and high environmental stability. Here, the conformal and area selective (AS) low‐temperature growth of layered PtSe2 is presented defining a new paradigm for 2D material integration. The thermally‐assisted conversion of platinum which is deposited by AS atomic layer deposition to PtSe2 is demonstrated on various substrates with a distinct 3D topography. Further the viability of the approach is presented by successful on‐chip integration of hybrid semiconductor devices, namely by the manufacture of a highly sensitive ammonia sensors channel with 3D topography and fully integrated infrared‐photodetectors on silicon photonics waveguides. The presented methodologies of conformal and AS growth therefore lay the foundation for new design routes for the synthesis of more complex hybrid structures with 2D materials.
- Open Access
- 21 June 2021
- Published by Wiley in Advanced Functional Materials
- Vol. 31 (35) , 2102929
Correlating Nanocrystalline Structure with Electronic Properties in 2D Platinum Diselenide
Platinum diselenide (PtSe2) is a 2D material with outstanding electronic and piezoresistive properties. The material can be grown at low temperatures in a scalable manner, which makes it extremely appealing for many potential electronics, photonics, and sensing applications. Here, the nanocrystalline structure of different PtSe2 thin films grown by thermally assisted conversion (TAC) is investigated and is correlated with their electronic and piezoresistive properties. Scanning transmission electron microscopy for structural analysis, X‐ray photoelectron spectroscopy (XPS) for chemical analysis, and Raman spectroscopy for phase identification are used. Electronic devices are fabricated using transferred PtSe2 films for electrical characterization and piezoresistive gauge factor measurements. The variations of crystallite size and their orientations are found to have a strong correlation with the electronic and piezoresistive properties of the films, especially the sheet resistivity and the effective charge carrier mobility. The findings may pave the way for tuning and optimizing the properties of TAC‐grown PtSe2 toward numerous applications.
- 21 June 2021
- Published by Wiley in Advanced Functional Materials
- Vol. 31 (35) , 2102929
Open AccessCorrelating Nanocrystalline Structure with Electronic Properties in 2D Platinum Diselenide
Platinum diselenide (PtSe2) is a 2D material with outstanding electronic and piezoresistive properties. The material can be grown at low temperatures in a scalable manner, which makes it extremely appealing for many potential electronics, photonics, and sensing applications. Here, the nanocrystalline structure of different PtSe2 thin films grown by thermally assisted conversion (TAC) is investigated and is correlated with their electronic and piezoresistive properties. Scanning transmission electron microscopy for structural analysis, X‐ray photoelectron spectroscopy (XPS) for chemical analysis, and Raman spectroscopy for phase identification are used. Electronic devices are fabricated using transferred PtSe2 films for electrical characterization and piezoresistive gauge factor measurements. The variations of crystallite size and their orientations are found to have a strong correlation with the electronic and piezoresistive properties of the films, especially the sheet resistivity and the effective charge carrier mobility. The findings may pave the way for tuning and optimizing the properties of TAC‐grown PtSe2 toward numerous applications.
- Open Access
- 10 February 2021
- Published by Springer Nature in Nature Communications
- Vol. 12 (1) , 1-11
Large-area integration of two-dimensional materials and their heterostructures by wafer bonding
Integrating two-dimensional (2D) materials into semiconductor manufacturing lines is essential to exploit their material properties in a wide range of application areas. However, current approaches are not compatible with high-volume manufacturing on wafer level. Here, we report a generic methodology for large-area integration of 2D materials by adhesive wafer bonding. Our approach avoids manual handling and uses equipment, processes, and materials that are readily available in large-scale semiconductor manufacturing lines. We demonstrate the transfer of CVD graphene from copper foils (100-mm diameter) and molybdenum disulfide (MoS2) from SiO2/Si chips (centimeter-sized) to silicon wafers (100-mm diameter). Furthermore, we stack graphene with CVD hexagonal boron nitride and MoS2 layers to heterostructures, and fabricate encapsulated field-effect graphene devices, with high carrier mobilities of up to $$4520\;{\mathrm{cm}}^2{\mathrm{V}}^{ - 1}{\mathrm{s}}^{ - 1}$$ . Thus, our approach is suited for backend of the line integration of 2D materials on top of integrated circuits, with potential to accelerate progress in electronics, photonics, and sensing.- 10 February 2021
- Published by Springer Nature in Nature Communications
- Vol. 12 (1) , 1-11
Open AccessLarge-area integration of two-dimensional materials and their heterostructures by wafer bonding
Integrating two-dimensional (2D) materials into semiconductor manufacturing lines is essential to exploit their material properties in a wide range of application areas. However, current approaches are not compatible with high-volume manufacturing on wafer level. Here, we report a generic methodology for large-area integration of 2D materials by adhesive wafer bonding. Our approach avoids manual handling and uses equipment, processes, and materials that are readily available in large-scale semiconductor manufacturing lines. We demonstrate the transfer of CVD graphene from copper foils (100-mm diameter) and molybdenum disulfide (MoS2) from SiO2/Si chips (centimeter-sized) to silicon wafers (100-mm diameter). Furthermore, we stack graphene with CVD hexagonal boron nitride and MoS2 layers to heterostructures, and fabricate encapsulated field-effect graphene devices, with high carrier mobilities of up to $$4520\;{\mathrm{cm}}^2{\mathrm{V}}^{ - 1}{\mathrm{s}}^{ - 1}$$ . Thus, our approach is suited for backend of the line integration of 2D materials on top of integrated circuits, with potential to accelerate progress in electronics, photonics, and sensing.