Bulat Ziganshin
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Bulat Ziganshin has a total of 166 co-authors. Here are the top co-authors by number of shared publications:
Зиганшин
9 shared publications- Ilnur Gayfullin
Kazan State Agrarian University
8 shared publications Andrey Dmitriev
7 shared publications- Ayrat Valiev
Kazan State Agrarian University
5 shared publications Guzaliya Klychova
Kazan State Agrarian University
5 shared publications- Ilgiz Galiev
Kazan State Agrarian University
5 shared publications
Latest Publications
- Open Access
- 30 July 2025
- Published by Kazan State Agrarian University in Vestnik of Kazan State Agrarian University
- Vol. 20 (2) , 72-78
IMPROVEMENT OF BIOGAS PLANT OPERATION MODES
The relevance of research on the processing of organic agricultural waste with the addition of various impurities in order to increase the yield of biogas is due to the growing need for efficient and sustainable energy sources. In the context of global climate change and the depletion of traditional resources, biogas is becoming an important alternative that helps reduce greenhouse gas emissions and recycle organic waste. This study examines the processes of anaerobic digestion of organic waste generated in agriculture using a small-volume biogas plant developed at Kazan State Agrarian University. The aim of the work is to increase the efficiency of biogas output through optimization of the parameters and operating modes of the biogas plant. Various types of organic substrates were used in the studies. The operation of the plant depends on an alternating current network (220 V) and consumes no more than 0.8 kW∙h of electricity. In the thermophilic mode (40-55 °C) of processing various substrates, the following amount of biogas was produced: 9 m3 from pig manure, 7.6 m3 from chicken manure, 4.96 m3 from horse manure and 8.3 m3 from cattle manure. The greatest increase in biogas is observed when using horse manure in the thermophilic mode. The experimental results show that the use of additives such as Mephosphon and various plant materials significantly increases the output of biogas, which is confirmed by the data obtained, where when using Mephosphon - 11.4 m3, crushed corn - 10.5 m3, birch sawdust - 9.4 m3 and crushed straw - 9.1 m3. These results emphasize the potential of using new additives in the substrate to optimize biogas production processes and contribute to the development of more efficient renewable energy technologies.
- 30 July 2025
- Published by Kazan State Agrarian University in Vestnik of Kazan State Agrarian University
- Vol. 20 (2) , 72-78
Open AccessIMPROVEMENT OF BIOGAS PLANT OPERATION MODES
The relevance of research on the processing of organic agricultural waste with the addition of various impurities in order to increase the yield of biogas is due to the growing need for efficient and sustainable energy sources. In the context of global climate change and the depletion of traditional resources, biogas is becoming an important alternative that helps reduce greenhouse gas emissions and recycle organic waste. This study examines the processes of anaerobic digestion of organic waste generated in agriculture using a small-volume biogas plant developed at Kazan State Agrarian University. The aim of the work is to increase the efficiency of biogas output through optimization of the parameters and operating modes of the biogas plant. Various types of organic substrates were used in the studies. The operation of the plant depends on an alternating current network (220 V) and consumes no more than 0.8 kW∙h of electricity. In the thermophilic mode (40-55 °C) of processing various substrates, the following amount of biogas was produced: 9 m3 from pig manure, 7.6 m3 from chicken manure, 4.96 m3 from horse manure and 8.3 m3 from cattle manure. The greatest increase in biogas is observed when using horse manure in the thermophilic mode. The experimental results show that the use of additives such as Mephosphon and various plant materials significantly increases the output of biogas, which is confirmed by the data obtained, where when using Mephosphon - 11.4 m3, crushed corn - 10.5 m3, birch sawdust - 9.4 m3 and crushed straw - 9.1 m3. These results emphasize the potential of using new additives in the substrate to optimize biogas production processes and contribute to the development of more efficient renewable energy technologies.
- Open Access
- 8 April 2025
- Published by EDP Sciences in E3S Web of Conferences
- Vol. 623, 04013
Justification of the scheme for linking consumers to suppliers of mineral fertilizers obtained from the disposal of poultry waste
The paper considers solutions to environmental issues in the poultry sector of the agro-industrial complex for the disposal of production waste, with the exception of culling, sediment from flotation units and slaughter waste. The raw materials for disposal are poultry waste, which, according to the Federal Classification, belong to hazard class 3-4. Using the example of a region, the real amount of generated waste requiring disposal is analyzed. A bush method for collecting generated waste is proposed for organizing innovation development centers. A possibility is proposed to solve the problem of fertilizer imbalance in the region on areas intended for wheat by optimizing transport routes. The introduction of a logistics scheme to reduce the negative impact on the environment from vehicles transporting the product obtained at installations using the thermal disposal method implemented in the proposed innovation development centers is substantiated.
- 8 April 2025
- Published by EDP Sciences in E3S Web of Conferences
- Vol. 623, 04013
Open AccessJustification of the scheme for linking consumers to suppliers of mineral fertilizers obtained from the disposal of poultry waste
The paper considers solutions to environmental issues in the poultry sector of the agro-industrial complex for the disposal of production waste, with the exception of culling, sediment from flotation units and slaughter waste. The raw materials for disposal are poultry waste, which, according to the Federal Classification, belong to hazard class 3-4. Using the example of a region, the real amount of generated waste requiring disposal is analyzed. A bush method for collecting generated waste is proposed for organizing innovation development centers. A possibility is proposed to solve the problem of fertilizer imbalance in the region on areas intended for wheat by optimizing transport routes. The introduction of a logistics scheme to reduce the negative impact on the environment from vehicles transporting the product obtained at installations using the thermal disposal method implemented in the proposed innovation development centers is substantiated.
- Open Access
- 27 March 2025
- Published by Infra-M Academic Publishing House in Agrobiotechnologies and digital farming
- Vol. 4 (1) , 16-23
DISPOSAL OF ORGANIC AGRICULTURAL WASTE WITH BIOFERTILIZERS AND BIOGAS PRODUCTION
This scientific article presents the possibilities of improving innovative energy-saving solutions in the agricultural sector, and also studies the issues of energy consumption management and energy efficiency. The article presents the results of experimental studies of a mobile biogas plant operating in the thermophilic fermentation mode (at a temperature of 55°C) of organic waste, obtaining biogas and organic fertilizers. Experimental data showed that the composition of the obtained biogas includes: 67.8% methane (CH4), 28% carbon dioxide (CO2), 3% hydrogen (H2), 1% nitrogen (N2), 0.1% water (H2O) and hydrogen sulfide (H2S) at a level of 0.03%. During the 16-day study, the efficiency of processing organic waste from various types of livestock farming was assessed, resulting in the following volumes of biogas: 10 m³ from pig manure, 7 m3 from chicken manure, 5 m³ from horse manure and 8 m³ from cattle manure. The results of a comprehensive analysis of the obtained high-quality organic fertilizer for agrochemical, microbiological, sanitary-parasitological and sanitary-entomological indicators were carried out in a certified laboratory of Federal State Budgetary Institution “Tatar Interregional Veterinary Laboratory”. After processing organic waste in a biogas plant, the nitrogen content in the substrate increased by 3.5 times compared to the original material. The pH value of the obtained fertilizer was 7, which indicates a neutral pH. The phosphorus content reached 2.3%, and potassium - 1.3%. These data highlight the potential of using organic waste as a source of renewable energy, which can contribute to sustainable agricultural development and reduce the negative impact on the environment.
- 27 March 2025
- Published by Infra-M Academic Publishing House in Agrobiotechnologies and digital farming
- Vol. 4 (1) , 16-23
Open AccessDISPOSAL OF ORGANIC AGRICULTURAL WASTE WITH BIOFERTILIZERS AND BIOGAS PRODUCTION
This scientific article presents the possibilities of improving innovative energy-saving solutions in the agricultural sector, and also studies the issues of energy consumption management and energy efficiency. The article presents the results of experimental studies of a mobile biogas plant operating in the thermophilic fermentation mode (at a temperature of 55°C) of organic waste, obtaining biogas and organic fertilizers. Experimental data showed that the composition of the obtained biogas includes: 67.8% methane (CH4), 28% carbon dioxide (CO2), 3% hydrogen (H2), 1% nitrogen (N2), 0.1% water (H2O) and hydrogen sulfide (H2S) at a level of 0.03%. During the 16-day study, the efficiency of processing organic waste from various types of livestock farming was assessed, resulting in the following volumes of biogas: 10 m³ from pig manure, 7 m3 from chicken manure, 5 m³ from horse manure and 8 m³ from cattle manure. The results of a comprehensive analysis of the obtained high-quality organic fertilizer for agrochemical, microbiological, sanitary-parasitological and sanitary-entomological indicators were carried out in a certified laboratory of Federal State Budgetary Institution “Tatar Interregional Veterinary Laboratory”. After processing organic waste in a biogas plant, the nitrogen content in the substrate increased by 3.5 times compared to the original material. The pH value of the obtained fertilizer was 7, which indicates a neutral pH. The phosphorus content reached 2.3%, and potassium - 1.3%. These data highlight the potential of using organic waste as a source of renewable energy, which can contribute to sustainable agricultural development and reduce the negative impact on the environment.
- 26 December 2024
- Published by Kazan State Agrarian University in Vestnik of Kazan State Agrarian University
- Vol. 19 (4) , 75-80
EXPERIMENTAL STUDY OF A GRAIN FEED CRUSHING PLANT
Grinding is a well-known and important method of grain processing. In this process, the hard shell of the grain is destroyed, which accelerates digestion in the stomach of animals and ensures a more complete absorption of food energy in the feed. In agricultural enterprises, it is better to provide grain feed on its own feed base. For this purpose, small-sized crushing equipment (crushers) are used. Such installations are characterized by low metal and energy intensity, simple design, mobility and low cost. The purpose of the work is to evaluate the efficiency of the developed crusher in comparison with an analogue - grain crusher Farmer IZE-05M. To achieve this goal, a small-sized unit (crusher) with a disk was manufactured. Its distinctive feature is the presence of two disks with a diameter of 160 and 210 mm. The unit is designed in such a way that it has the ability to process seeds of grain crops with high humidity. During the research, the results of grain grinding, the degree of its grinding and energy intensity were obtained. The results showed that the developed unit is capable of providing fine grain grinding than its analogue. The optimal humidity for obtaining fine grinding on the analogue is 12.8%, and in our unit it is possible to work with a humidity of 13.1%. The difference in humidity is 0.3%. This means that the costs of preliminary grain drying will be reduced several times. Also, the grain grinding range is somewhat wider from 13.1% to 14.4% against 12.8%...13.9%. The energy consumption at a grain humidity of 9.8% of the developed installation was 5.1 J/kg, which is 0.8 J/kg lower than the analogue (5.9 J/kg). At increased grain humidity up to 14.4%, the energy intensity of the new installation decreased to 8.6 J/kg, while for the analogue it was 9.5 J/kg.
- 26 December 2024
- Published by Kazan State Agrarian University in Vestnik of Kazan State Agrarian University
- Vol. 19 (4) , 75-80
EXPERIMENTAL STUDY OF A GRAIN FEED CRUSHING PLANT
Grinding is a well-known and important method of grain processing. In this process, the hard shell of the grain is destroyed, which accelerates digestion in the stomach of animals and ensures a more complete absorption of food energy in the feed. In agricultural enterprises, it is better to provide grain feed on its own feed base. For this purpose, small-sized crushing equipment (crushers) are used. Such installations are characterized by low metal and energy intensity, simple design, mobility and low cost. The purpose of the work is to evaluate the efficiency of the developed crusher in comparison with an analogue - grain crusher Farmer IZE-05M. To achieve this goal, a small-sized unit (crusher) with a disk was manufactured. Its distinctive feature is the presence of two disks with a diameter of 160 and 210 mm. The unit is designed in such a way that it has the ability to process seeds of grain crops with high humidity. During the research, the results of grain grinding, the degree of its grinding and energy intensity were obtained. The results showed that the developed unit is capable of providing fine grain grinding than its analogue. The optimal humidity for obtaining fine grinding on the analogue is 12.8%, and in our unit it is possible to work with a humidity of 13.1%. The difference in humidity is 0.3%. This means that the costs of preliminary grain drying will be reduced several times. Also, the grain grinding range is somewhat wider from 13.1% to 14.4% against 12.8%...13.9%. The energy consumption at a grain humidity of 9.8% of the developed installation was 5.1 J/kg, which is 0.8 J/kg lower than the analogue (5.9 J/kg). At increased grain humidity up to 14.4%, the energy intensity of the new installation decreased to 8.6 J/kg, while for the analogue it was 9.5 J/kg.
- Open Access
- 13 August 2024
- Published by Kazan State Agrarian University in Vestnik of Kazan State Agrarian University
- Vol. 19 (2) , 44-50
A GENERAL APPROACH TO SOLVING THE PROBLEM OF ENSURING THE EFFICIENCY OF TRACTORS IN THE AGRO-INDUSTRIAL INDUSTRY
Agricultural production is characterized by the seasonality of mechanized work in the cultivation of crops. In addition, the amount of wear on aggregates and equipment systems is determined, on the one hand, by natural and climatic conditions and, on the other, by the nomenclature of operations performed in the planned period, organizational, production and technical conditions in a particular farm. Tractor units and systems are interconnect with each other and interdependent on each other, i.e. the amount of wear of some parts affects the wear of others. In this regard, the purpose of the research is to develop a concept for ensuring the operability of tractors in the agro-industrial complex by optimizing the resource consumption of aggregates and systems, taking into account the conditions of their operation. The most promising direction for improving the efficiency of tractor operation is the development of measures to optimize the resource consumption of their units and systems, taking into account the operating conditions of machinery in the agro-industrial complex. To predict changes in the physical parameter of a part, unit, and tractor system for the planned period of a certain amount of work, a concept is introduced - an indicator of resource consumption, which determines the amount of change in the diagnostic parameter of the unit state per unit of work performed. The assessment of the tractor condition is carry out by the level of equipment resource consumption, which makes it possible to promptly respond to the state of technical operation of equipment, the conditions of their operation and develop measures to optimize resource consumption. The resource consumption level (Urr) of the tractor, theoretically, can vary from 0 to 1. In this case, Urr=0 it is assumed that the tractor is written off from the balance sheet of the farm or is missing; with Urr=1, it is assumed that the tractor is in good condition and all tractor parameters have nominal values. With known patterns of changes in the level of resource consumption for various types of agricultural operations, it becomes possible to plan the range of work for each tractor for the planned period, taking into account the optimal resource consumption of their units and systems.
- 13 August 2024
- Published by Kazan State Agrarian University in Vestnik of Kazan State Agrarian University
- Vol. 19 (2) , 44-50
Open AccessA GENERAL APPROACH TO SOLVING THE PROBLEM OF ENSURING THE EFFICIENCY OF TRACTORS IN THE AGRO-INDUSTRIAL INDUSTRY
Agricultural production is characterized by the seasonality of mechanized work in the cultivation of crops. In addition, the amount of wear on aggregates and equipment systems is determined, on the one hand, by natural and climatic conditions and, on the other, by the nomenclature of operations performed in the planned period, organizational, production and technical conditions in a particular farm. Tractor units and systems are interconnect with each other and interdependent on each other, i.e. the amount of wear of some parts affects the wear of others. In this regard, the purpose of the research is to develop a concept for ensuring the operability of tractors in the agro-industrial complex by optimizing the resource consumption of aggregates and systems, taking into account the conditions of their operation. The most promising direction for improving the efficiency of tractor operation is the development of measures to optimize the resource consumption of their units and systems, taking into account the operating conditions of machinery in the agro-industrial complex. To predict changes in the physical parameter of a part, unit, and tractor system for the planned period of a certain amount of work, a concept is introduced - an indicator of resource consumption, which determines the amount of change in the diagnostic parameter of the unit state per unit of work performed. The assessment of the tractor condition is carry out by the level of equipment resource consumption, which makes it possible to promptly respond to the state of technical operation of equipment, the conditions of their operation and develop measures to optimize resource consumption. The resource consumption level (Urr) of the tractor, theoretically, can vary from 0 to 1. In this case, Urr=0 it is assumed that the tractor is written off from the balance sheet of the farm or is missing; with Urr=1, it is assumed that the tractor is in good condition and all tractor parameters have nominal values. With known patterns of changes in the level of resource consumption for various types of agricultural operations, it becomes possible to plan the range of work for each tractor for the planned period, taking into account the optimal resource consumption of their units and systems.
- Open Access
- 30 December 2023
- Published by Kazan State Agrarian University in Vestnik of Kazan State Agrarian University
- Vol. 18 (4) , 82-88
DETERMINING THE ENERGY CONSUMPTION OF THE PROCESS OF GRINDING BY CUTTING IN A FEED GRINDER
The relevance of the study is due to the need to reduce energy intensity and loss of nutritional value of feed while simultaneously improving quality indicators during the grinding process. The work was carried out with the aim of theoretical studies of the design and technological parameters of the feed chopper and determining the energy consumption of the grinding process by cutting. The scientific novelty of the research lies in the mathematical models for determining the cutting work and the total drive power of the feed chopper. When carrying out the research, the general scientific principles of the theory of elasticity, the theory of shells, and fracture mechanics were used, and the physical, mechanical and technological properties of feed of plant origin were also taken into account. A device is proposed, the design of which has the following advantages: a uniform supply of material to the cutting zone (to the knives) is ensured due to the working chamber in the form of a truncated cone, which leads to a consistent reduction in the size of the feed to those established by zootechnical requirements and improves its quality; the ability to change the angle of inclination of the rotary counter-cutting knives, which provides adjustment of the intensity of the grinding process; reduction in the energy intensity of grinding due to the free movement of crushed feed into the unloading chamber and the original shape of the tosser blade. Analytical expressions were obtained to determine the cutting work on each row of knives for one knife in a row, the total work of all knives per revolution, as well as the required power for the rotor drive. As a result of the research, it was established that the energy intensity of the grinding process is determined as the sum of the costs of cutting, acceleration of the material and idling of the rotor. The total power required to drive the chopper depends on the number, geometric characteristics of the chopper and counter-cutting knives, the rotor speed, and the properties of the material being crushed.
- 30 December 2023
- Published by Kazan State Agrarian University in Vestnik of Kazan State Agrarian University
- Vol. 18 (4) , 82-88
Open AccessDETERMINING THE ENERGY CONSUMPTION OF THE PROCESS OF GRINDING BY CUTTING IN A FEED GRINDER
The relevance of the study is due to the need to reduce energy intensity and loss of nutritional value of feed while simultaneously improving quality indicators during the grinding process. The work was carried out with the aim of theoretical studies of the design and technological parameters of the feed chopper and determining the energy consumption of the grinding process by cutting. The scientific novelty of the research lies in the mathematical models for determining the cutting work and the total drive power of the feed chopper. When carrying out the research, the general scientific principles of the theory of elasticity, the theory of shells, and fracture mechanics were used, and the physical, mechanical and technological properties of feed of plant origin were also taken into account. A device is proposed, the design of which has the following advantages: a uniform supply of material to the cutting zone (to the knives) is ensured due to the working chamber in the form of a truncated cone, which leads to a consistent reduction in the size of the feed to those established by zootechnical requirements and improves its quality; the ability to change the angle of inclination of the rotary counter-cutting knives, which provides adjustment of the intensity of the grinding process; reduction in the energy intensity of grinding due to the free movement of crushed feed into the unloading chamber and the original shape of the tosser blade. Analytical expressions were obtained to determine the cutting work on each row of knives for one knife in a row, the total work of all knives per revolution, as well as the required power for the rotor drive. As a result of the research, it was established that the energy intensity of the grinding process is determined as the sum of the costs of cutting, acceleration of the material and idling of the rotor. The total power required to drive the chopper depends on the number, geometric characteristics of the chopper and counter-cutting knives, the rotor speed, and the properties of the material being crushed.
- Open Access
- 2 October 2023
- Published by Kazan State Agrarian University in Vestnik of Kazan State Agrarian University
- Vol. 18 (3) , 186-192
THE MAIN DIRECTIONS OF IMPROVING THE USE OF THE SUPER SERVICE “ADMISSION TO THE UNIVERSITY ONLINE” IN THE WORK OF THE ADMISSIONS COMMITTE OF KAZAN STATE AGRARIAN UNIVERSITY
Digital transformation is increasingly affecting various areas of higher education. Digital services and tools significantly change the principles of interaction between the admissions committee and the applicant, the teacher and the student, the higher education institution and the regulatory authorities. The process of introducing the super service “Admission to university online”, which began in 2019, was supposed to change the mechanism for submitting applications to universities. It was assumed that applicants would be able to upload the necessary documents to the service and enroll in the selected educational institution without the need for a personal visit. In the future, the super service was supposed to replace traditional forms of filing documents. However, by 2022, the submission of paper documents directly to the university is still the main and most popular mechanism for interaction between the applicant and the admissions committee. This work is a continuation of a study conducted since 2020 at Kazan State Agrarian University, the purpose of which is to identify the main obstacles to the effective use of the superservis “Admission to university online”. The paper presents and compares with last year’s results the data of a newly conducted survey of applicants who visited the university in person. The identified main reasons for refusing to use the digital service are the same, but the share of applicants who used this mechanism for submitting documents to the university is growing. The result of the study was proposals for the university’s admissions committees to more effectively implement digital tools and obtain the necessary competencies when interacting with applicants through superswervis. The proposed activities include the use of educational computer classes to access the super service, online counseling of applicants by university teachers, a chatbot for automatic answers to the most popular questions and the holding of various competitions and quizzes to raise awareness of the possibilities of the super service in social networks and in career guidance work. The authors' proposals should help the admissions committee to increase the level of customer focus and improve the image component of Kazan State Agrarian University.
- 2 October 2023
- Published by Kazan State Agrarian University in Vestnik of Kazan State Agrarian University
- Vol. 18 (3) , 186-192
Open AccessTHE MAIN DIRECTIONS OF IMPROVING THE USE OF THE SUPER SERVICE “ADMISSION TO THE UNIVERSITY ONLINE” IN THE WORK OF THE ADMISSIONS COMMITTE OF KAZAN STATE AGRARIAN UNIVERSITY
Digital transformation is increasingly affecting various areas of higher education. Digital services and tools significantly change the principles of interaction between the admissions committee and the applicant, the teacher and the student, the higher education institution and the regulatory authorities. The process of introducing the super service “Admission to university online”, which began in 2019, was supposed to change the mechanism for submitting applications to universities. It was assumed that applicants would be able to upload the necessary documents to the service and enroll in the selected educational institution without the need for a personal visit. In the future, the super service was supposed to replace traditional forms of filing documents. However, by 2022, the submission of paper documents directly to the university is still the main and most popular mechanism for interaction between the applicant and the admissions committee. This work is a continuation of a study conducted since 2020 at Kazan State Agrarian University, the purpose of which is to identify the main obstacles to the effective use of the superservis “Admission to university online”. The paper presents and compares with last year’s results the data of a newly conducted survey of applicants who visited the university in person. The identified main reasons for refusing to use the digital service are the same, but the share of applicants who used this mechanism for submitting documents to the university is growing. The result of the study was proposals for the university’s admissions committees to more effectively implement digital tools and obtain the necessary competencies when interacting with applicants through superswervis. The proposed activities include the use of educational computer classes to access the super service, online counseling of applicants by university teachers, a chatbot for automatic answers to the most popular questions and the holding of various competitions and quizzes to raise awareness of the possibilities of the super service in social networks and in career guidance work. The authors' proposals should help the admissions committee to increase the level of customer focus and improve the image component of Kazan State Agrarian University.
- Open Access
- 2 October 2023
- Published by Kazan State Agrarian University in Vestnik of Kazan State Agrarian University
- Vol. 18 (3) , 84-91
INCREASING THE EFFECTIVENESS OF SCIENTIFIC AND TECHNICAL DEVELOPMENTS FOR ORGANIC FARMING
The article analyzes the effectiveness of scientific and technical developments in obtaining biologically pure products in agriculture, identifies aspects of improving the effectiveness of scientific and technical developments in the agricultural sector used in obtaining agricultural products in organic farming, in particular, the specifics of the development agricultural machines and tools for organic agriculture, the conditions that the developed equipment must satisfy are determined. The analysis of factors contributing to the increase in the cost of work on the creation of a single technical tool for the conditions of organic farming was carried out. The proportions that have developed at the present time in the structure of R&D performed in the agricultural engineering industry are also considered. It is concluded that insufficient attention is paid to the work on the creation of a strategic scientific and technical reserve, inertia of R&D subjects and organizational and staff structures of the sectoral research institutes of agricultural engineering. The necessity of creating organizational forms of integration of science and production, which allow for a clear and quick passage of ideas from their inception to widespread use in practice, the widespread use of new progressive forms of organization of scientific activity is considered. Measures are proposed to improve the systematic organization of R&D management. The necessity of introducing documents on the procedure for conducting joint work on the creation of new types of agricultural machinery, carried out by subordinate research and technological organizations, is shown. A significant place in the article is given to the directions and results of the work of Kazan State Agrarian University in the field of R&D and its contribution to the scientific support of the agro-industrial complex of the Republic of Tatarstan and the Russian Federation. The currently used forms of R&D integration are considered from the point of view of the completeness of coverage of all potential performers, especially the academic and university sectors of science. Ways are proposed to expand the communication systems for scientific and technical cooperation through the widespread use of forms of interdepartmental cooperation, using progressive developments in the field of scientific and technical developments of Russian research institutes and educational institutions. Recommendations are proposed to increase the amount of funding for work on creating a strategic scientific and technical reserve in agricultural machinery and the implementation of a certain economic management mechanism. It is concluded that there are all the necessary prerequisites for a decisive transition to fundamentally new technologies, machines and tools in organic agricultural production, a significant improvement in the organization of work on their creation and implementation, which will dramatically accelerate the pace of scientific and technological progress in the industry.
- 2 October 2023
- Published by Kazan State Agrarian University in Vestnik of Kazan State Agrarian University
- Vol. 18 (3) , 84-91
Open AccessINCREASING THE EFFECTIVENESS OF SCIENTIFIC AND TECHNICAL DEVELOPMENTS FOR ORGANIC FARMING
The article analyzes the effectiveness of scientific and technical developments in obtaining biologically pure products in agriculture, identifies aspects of improving the effectiveness of scientific and technical developments in the agricultural sector used in obtaining agricultural products in organic farming, in particular, the specifics of the development agricultural machines and tools for organic agriculture, the conditions that the developed equipment must satisfy are determined. The analysis of factors contributing to the increase in the cost of work on the creation of a single technical tool for the conditions of organic farming was carried out. The proportions that have developed at the present time in the structure of R&D performed in the agricultural engineering industry are also considered. It is concluded that insufficient attention is paid to the work on the creation of a strategic scientific and technical reserve, inertia of R&D subjects and organizational and staff structures of the sectoral research institutes of agricultural engineering. The necessity of creating organizational forms of integration of science and production, which allow for a clear and quick passage of ideas from their inception to widespread use in practice, the widespread use of new progressive forms of organization of scientific activity is considered. Measures are proposed to improve the systematic organization of R&D management. The necessity of introducing documents on the procedure for conducting joint work on the creation of new types of agricultural machinery, carried out by subordinate research and technological organizations, is shown. A significant place in the article is given to the directions and results of the work of Kazan State Agrarian University in the field of R&D and its contribution to the scientific support of the agro-industrial complex of the Republic of Tatarstan and the Russian Federation. The currently used forms of R&D integration are considered from the point of view of the completeness of coverage of all potential performers, especially the academic and university sectors of science. Ways are proposed to expand the communication systems for scientific and technical cooperation through the widespread use of forms of interdepartmental cooperation, using progressive developments in the field of scientific and technical developments of Russian research institutes and educational institutions. Recommendations are proposed to increase the amount of funding for work on creating a strategic scientific and technical reserve in agricultural machinery and the implementation of a certain economic management mechanism. It is concluded that there are all the necessary prerequisites for a decisive transition to fundamentally new technologies, machines and tools in organic agricultural production, a significant improvement in the organization of work on their creation and implementation, which will dramatically accelerate the pace of scientific and technological progress in the industry.
- Open Access
- 2 October 2023
- Published by Kazan State Agrarian University in Vestnik of Kazan State Agrarian University
- Vol. 18 (3) , 186-192
THE MAIN DIRECTIONS OF IMPROVING THE USE OF THE SUPER SERVICE “ADMISSION TO THE UNIVERSITY ONLINE” IN THE WORK OF THE ADMISSIONS COMMITTE OF KAZAN STATE AGRARIAN UNIVERSITY
Digital transformation is increasingly affecting various areas of higher education. Digital services and tools significantly change the principles of interaction between the admissions committee and the applicant, the teacher and the student, the higher education institution and the regulatory authorities. The process of introducing the super service “Admission to university online”, which began in 2019, was supposed to change the mechanism for submitting applications to universities. It was assumed that applicants would be able to upload the necessary documents to the service and enroll in the selected educational institution without the need for a personal visit. In the future, the super service was supposed to replace traditional forms of filing documents. However, by 2022, the submission of paper documents directly to the university is still the main and most popular mechanism for interaction between the applicant and the admissions committee. This work is a continuation of a study conducted since 2020 at Kazan State Agrarian University, the purpose of which is to identify the main obstacles to the effective use of the superservis “Admission to university online”. The paper presents and compares with last year’s results the data of a newly conducted survey of applicants who visited the university in person. The identified main reasons for refusing to use the digital service are the same, but the share of applicants who used this mechanism for submitting documents to the university is growing. The result of the study was proposals for the university’s admissions committees to more effectively implement digital tools and obtain the necessary competencies when interacting with applicants through superswervis. The proposed activities include the use of educational computer classes to access the super service, online counseling of applicants by university teachers, a chatbot for automatic answers to the most popular questions and the holding of various competitions and quizzes to raise awareness of the possibilities of the super service in social networks and in career guidance work. The authors' proposals should help the admissions committee to increase the level of customer focus and improve the image component of Kazan State Agrarian University.
- 2 October 2023
- Published by Kazan State Agrarian University in Vestnik of Kazan State Agrarian University
- Vol. 18 (3) , 186-192
Open AccessTHE MAIN DIRECTIONS OF IMPROVING THE USE OF THE SUPER SERVICE “ADMISSION TO THE UNIVERSITY ONLINE” IN THE WORK OF THE ADMISSIONS COMMITTE OF KAZAN STATE AGRARIAN UNIVERSITY
Digital transformation is increasingly affecting various areas of higher education. Digital services and tools significantly change the principles of interaction between the admissions committee and the applicant, the teacher and the student, the higher education institution and the regulatory authorities. The process of introducing the super service “Admission to university online”, which began in 2019, was supposed to change the mechanism for submitting applications to universities. It was assumed that applicants would be able to upload the necessary documents to the service and enroll in the selected educational institution without the need for a personal visit. In the future, the super service was supposed to replace traditional forms of filing documents. However, by 2022, the submission of paper documents directly to the university is still the main and most popular mechanism for interaction between the applicant and the admissions committee. This work is a continuation of a study conducted since 2020 at Kazan State Agrarian University, the purpose of which is to identify the main obstacles to the effective use of the superservis “Admission to university online”. The paper presents and compares with last year’s results the data of a newly conducted survey of applicants who visited the university in person. The identified main reasons for refusing to use the digital service are the same, but the share of applicants who used this mechanism for submitting documents to the university is growing. The result of the study was proposals for the university’s admissions committees to more effectively implement digital tools and obtain the necessary competencies when interacting with applicants through superswervis. The proposed activities include the use of educational computer classes to access the super service, online counseling of applicants by university teachers, a chatbot for automatic answers to the most popular questions and the holding of various competitions and quizzes to raise awareness of the possibilities of the super service in social networks and in career guidance work. The authors' proposals should help the admissions committee to increase the level of customer focus and improve the image component of Kazan State Agrarian University.
- Open Access
- 2 October 2023
- Published by Kazan State Agrarian University in Vestnik of Kazan State Agrarian University
- Vol. 18 (3) , 154-162
THE IMPACT OF GENDER DIVERSITY ON THE QUALITY OF MANAGEMENT DECISIONS IN THE CORPORATE SECTOR
The quality of management decision-making is determined by a number of factors, including the high competence of top management, its ability to adequately perceive and take into account the dynamism and instability of the external environment in the decision-making process for the purpose of flexible restructuring of business processes, and, if necessary, to adjust the company’s development strategy. In other words, competent leadership is a key factor in the quality of management decisions as a result of prompt, strategically verified and balanced adoption. At the same time, studying the quality of management decisions is impossible without taking into account the specifics of each individual company, its organizational structure, corporate culture, corporate communications system, management style, personal characteristics of top management, and gender diversity in the company's leadership. The study and synthesis of statistical data revealing the impact of gender diversity on company performance made it possible to provide a reasoned justification for the existence of a direct connection between the inclusion of women in directors and the profitability of companies. The combination of female and male mentality in company management allows us to find and apply new approaches to making management decisions that allow us to achieve all our goals. The success of many companies headed by women shows that it is largely predetermined by the personal qualities of women managers, manifested in the choice of behavioral models, preferences of methodological approaches to the management decision-making process, levels of adoption and types of decisions made, as well as their inherent personal authority and personal qualities. Gender diversity of the top management of companies allows us to minimize the possible deficit of the required personal qualities for making management decisions, which will inevitably lead to the effectiveness of the decisions made.
- 2 October 2023
- Published by Kazan State Agrarian University in Vestnik of Kazan State Agrarian University
- Vol. 18 (3) , 154-162
Open AccessTHE IMPACT OF GENDER DIVERSITY ON THE QUALITY OF MANAGEMENT DECISIONS IN THE CORPORATE SECTOR
The quality of management decision-making is determined by a number of factors, including the high competence of top management, its ability to adequately perceive and take into account the dynamism and instability of the external environment in the decision-making process for the purpose of flexible restructuring of business processes, and, if necessary, to adjust the company’s development strategy. In other words, competent leadership is a key factor in the quality of management decisions as a result of prompt, strategically verified and balanced adoption. At the same time, studying the quality of management decisions is impossible without taking into account the specifics of each individual company, its organizational structure, corporate culture, corporate communications system, management style, personal characteristics of top management, and gender diversity in the company's leadership. The study and synthesis of statistical data revealing the impact of gender diversity on company performance made it possible to provide a reasoned justification for the existence of a direct connection between the inclusion of women in directors and the profitability of companies. The combination of female and male mentality in company management allows us to find and apply new approaches to making management decisions that allow us to achieve all our goals. The success of many companies headed by women shows that it is largely predetermined by the personal qualities of women managers, manifested in the choice of behavioral models, preferences of methodological approaches to the management decision-making process, levels of adoption and types of decisions made, as well as their inherent personal authority and personal qualities. Gender diversity of the top management of companies allows us to minimize the possible deficit of the required personal qualities for making management decisions, which will inevitably lead to the effectiveness of the decisions made.