TKTamara Krieger

Tamara Krieger

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Tamara Krieger has a total of 42 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    E-beam sintering of neodymium tungstate and its composite with nickel (II) and copper (II) oxides

    by Nikita F. Eremeev, Ekaterina M. Sadovskaya, Tamara A. Krieger, Olga A. Bulavchenko, Vasily V. Kaichev, Anna M. Kremneva, Evgeny A. Suprun, Mostefe Khalid Mohammed, Mikhail A. Mikhailenko, Mikhail V. Korobeynikov, et al.

    Neodymium tungstates and their composites with metal alloys, such as NiCu, have emerged as promising materials for hydrogen separation membranes due to their high proton conductivity and stability in CO2-containing atmospheres. The fabrication of gas-tight ceramics based on these materials constitutes a distinct challenge. A promising approach to address this issue is the utilization of advanced sintering techniques, such as radiation-thermal sintering using an electron beam. The present study investigates the impact of radiation-thermal sintering temperature on the structural, textural properties, hydration ability, and oxygen mobility of Nd5.5WO11.25−δ oxides and NiO–CuO–Nd5.5WO11.25−δ composites, the precursors of NiCu alloy – Nd5.5WO11.25−δ materials for hydrogen separation membranes. The main phase of the Nd5.5WO11.25−δ samples is defective double fluorite, while their composites contain various nickel and copper oxides along with the neodymium tungstate phase. The attainment of gas-tightness in Nd5.5WO11.25−δ samples is achieved even at relatively low sintering temperatures (1200–1300 °C), which is unattainable through sintering in a furnace. Conversely, the composite samples exhibit high porosity. Hence, the procedure of preparing the NiO–CuO–Nd5.5WO11.25−δ composites required further optimization. Nd5.5WO11.25−δ sintered by e-beam at 1100–1300 °C exhibit optimal hydration properties. The highest oxygen mobility is demonstrated for the samples sintered at 1100 and 1200 °C (D* up to ~ 10−8 cm2/s), which is promising in the context of the incorporation and transport of protons in hydrogen separation membranes. Consequently, e-beam sintering emerges as a promising method for producing proton conductive ceramics based on Nd tungstate.


  • Open Access

    Structural properties, morphology, total conductivity and oxygen mobility of composite materials based on Bi cerates

    by Nikita Eremeev, Semyon Mironov, Ekaterina Sadovskaya, Tamara Krieger, Arcady Ishchenko, Artyom Ulikhin, Vladislav Sadykov, Yulia Bespalko

    Search of the new composite materials with mixed oxide-ionic–electronic conductivity and studies of their characteristics are important problems in the development of oxygen separation membranes as parts of catalytic reactors for biofuel transformation into syngas. Such composites are generally based on complex oxides with perovskite, fluorite, pyrochlore structure, etc. In this work, composites based on Bi cerates, Y-doped ceria and Pr nickelate-cobaltite are synthesized and studied. The composites are synthesized via ultrasonic dispersion in isopropanol. The obtained materials are characterized by X-ray diffraction, scanning and high resolution transmission electron microscopy. Electrical conductivity of the composites is studied by impedance spectroscopy. Oxygen transport properties are investigated by isotope exchange of oxygen with C18O2 in a flow reactor. The samples are comprised of fluorite, perovskite and, sometimes, pyrochlore phases and various admixtures with different compositions, apparently, due to cation redistribution and solid state reactions between phases. The total conductivity of samples is ~10−1 S/cm at 600 °C, which is high enough for using in the oxygen separation membranes. According to the isotope exchange data, the samples possess high oxygen mobility and surface reactivity. There is a distinct nonuniformity in the oxygen mobility, which is related to the effect of fast diffusion of oxygen associated with Bi and Ce cations, as well as the features of phase composition and real/defect structure. This makes the composites studied promising for using in the oxygen separation membranes.


  • Open Access

    Hydrogen production by dry reforming of methane in a catalytic reactor with La niobate-based hydrogen separation membrane

    by Nikita Eremeev, Dinara Altynbekova, Konstantin Valeev, Tamara Krieger, Arcady Ishchenko, Evgeny Suprun, Vladislav Sadykov, Yulia Bespalko

    Methane dry reforming is a promising approach for hydrogen production due to the simultaneous utilization of two greenhouse gases, methane and carbon dioxide. The implementation of methane dry reforming in catalytic reactors that utilize hydrogen separation membranes was demonstrated to enhance the process efficiency. This enhancement is attributed to the elimination of hydrogen, a product of the reaction, through the use of these membranes. The materials based on La1−xCaxNbO4±δ demonstrate considerable promise in applications involving hydrogen separation membranes due to their high protonic conductivity and stability under operational conditions. In this study, an asymmetric foam-supported membrane was fabricated and characterized in a hydrogen permeation test and a methane dry reforming reaction. The membrane is composed of a NiAl foam support, a La0.99Ca0.01NbO4±δ–NiCoOx dense permselective layer, and a NiRu/Pr0.3Ce0.35Zr0.35O2−δ catalytic layer. The membrane displays a high hydrogen permeation flux of ~2.5 ml H2/(cm2 min) at 700 °C in permeation tests and ~1.4 ml H2/(cm2 min) at 700 °C in methane dry reforming tests. Such a high hydrogen permeability can be attributed to the high protonic mobility of the permselective composite layer, as well as coupled electron and oxide ion transport. The conversion of methane and carbon dioxide is ~60% and ~80%, respectively. However, the membrane performance is demonstrated to slowly decline over a period of 100 hours of time-on-stream, which indicates that the composite and the catalyst materials require further development for more efficient application in catalytic membrane reactors for hydrogen production via methane dry reforming.


  • Open Access

    Structural and transport properties of La tungstate and its composite with nickel (II) and copper (II) oxides

    by Nikita Eremeev, Yulia Bespalko, Ekaterina Sadovskaya, Tamara Krieger, Svetlana Cherepanova, Evgeny Suprun, Arcady Ishchenko, Mikhail Mikhailenko, Mikhail Korobeynikov, Vladislav Sadykov

    La tungstates possessing a high protonic conductivity (~10–4 S/cm at 600 °C) are state-of-the-art materials for hydrogen separation membranes. A promising approach in design of new materials for this application is creation of triple-conductive materials on their basis. The current work aims at studying structural, textural and transport properties of La27W5O55.5–δ and the composite of La27W5O55.5–δ with NiO and CuO obtained via the mechanical activation and sintered either in a furnace or by radiation thermal sintering using electron beam. The oxide material obtained is distorted double fluorite, while the composites consist of LaNi0.8W0.2O3–δ, NiO and CuO phases. As compared to the oxide sintered in furnace, the electron beam sintered La27W5O55.5–δ demonstrates a lower occupancy of 24f sites by W, higher La:W ratio and larger grain size. Extended defects including grain boundaries are observed in TEM images. La27W5O55.5–δ possesses moderate oxygen transport properties (oxygen tracer diffusion coefficient ~10–10 cm2/s at 800 °C). Thermogravimetric analysis demonstrates that the materials exhibit the hydration behavior typical of proton conductors. The oxygen mobility is demonstrated to decline in the composites, which can be caused by a lower oxygen mobility of the LaNi0.8W0.2O3–δ phase compared to the La27W5O55.5–δ one and the diffusion hindered by nanoparticles of NiO and CuO. Reduction followed by reoxidation of the composites leads to increasing oxygen diffusivity, which can be related to partial unblocking of fast diffusion pathways.


  • Ni and Ni–Co Catalysts Based on Mixed Ce–Zr Oxides Synthesized in Isopropanol Medium for Dry Reforming of Methane

    by Yu. N. Bespalko, V. E. Fedorova, E. A. Smal, M. V. Arapova, K. R. Valeev, T. A. Krieger, A. V. Ishchenko, V. A. Sadykov, M. N. Simonov

    Single-phase Ce–Zr oxides with a fluorite structure were synthesized by the solvothermal method in an isopropanol medium. Synthesis was performed at the supercritical parameters of isopropanol. The effect of the synthesis parameters on the characteristics of the obtained materials (specific surface area, morphology, particle size, phase composition) was established. Ni (5 wt %) and Ni + Co (5 wt %) were deposited at a ratio of 1 : 1 by incipient wetness impregnation. The structure and properties of samples were characterized by physicochemical methods, such as X-ray diffraction, Raman spectroscopy, high-resolution transmission electron microscopy, and temperature-programmed reduction by hydrogen. The dependences of the conversion of reagents (CH4 and CO2), the yield of hydrogen, and the Ce/Zr ratio in the Dry reforming of methane (DRM) reaction on the composition of catalysts were studied. The effect of the composition of a deposited metallic component and the Ce/Zr ratio in the support on the catalytic properties and catalysts stability in the DRM reaction was shown.


  • Spinel-type MnxCr3-xO4-based catalysts for ethanol steam reforming

    by E.A. Smal, M.N. Simonov, N.V. Mezentseva, T.A. Krieger, T.V. Larina, A.A. Saraev, T.S. Glazneva, A.V. Ishchenko, V.A. Rogov, N.F. Eremeev, et al.


  • Structure and Transport Properties of Doped Apatite-type Lanthanum Silicates Prepared via Mechanochemical Route

    by Tamara Kharlamova, Svetlana Pavlova, Vladislav A. Sadykov, Yulia Bespalko, Tamara Krieger, Olga Lapina, Dzhalil Khabibulin, Vitalii Muzykantov, Marina Chaikina, Nikolai Uvarov, et al.

    Structural features of Fe- and Al-doped apatite-type lanthanum silicates with different stoichiometry have been studied by using XRD, XPS, IR, UV-Vis, EXAFS, Mossbauer, 29Si and 27Al MAS NMR spectroscopy. The transport properties of the samples were also characterized by using impedance spectroscopy and oxygen isotope heteroexchange.