Binur Mussabayeva
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Binur Mussabayeva has a total of 68 co-authors. Here are the top co-authors by number of shared publications:
- Alfira Sabitova
Shakarim University
10 shared publications - Alexey N. Klivenko
Shakarim University, Semey, Kazakhstan
6 shared publications - Bulbul Bayakhmetova
Shakarim University
5 shared publications - Lyazzat K. Orazzhanova
Shakarim University, Semey, Kazakhstan
5 shared publications - Dinara Muktaly
Faculty of Chemistry and Chemical Technology, Al-Farabi Kazakh National University, al-Farabi Av., 7, Almaty 050040, Kazakhstan
4 shared publications - Yerzhan Imanbayev
Laboratory of Petrochemical Processes, RSE “Institute of Combustion Problems”, Bogenbay Street, 172, Almaty 050012, Kazakhstan
4 shared publications
Latest Publications
- Open Access
Bioactive Compounds of Aboveground Organs Salicornia europaea L. of East Kazakhstan Flora
This study presents the phytochemical profile and antioxidant activity of the aboveground organs of Salicornia europaea L. collected from a natural population in East Kazakhstan. The chemical composition of the plant sample was studied using a complex of modern analytical methods, including HPLC, GC-MS, IR-Fourier spectroscopy, and elemental analysis. Metabolites were putatively annotated based on mass spectrometry data, corresponding to MSI level 2. It was found that the content of flavonoids was 2.40 ± 0.02 mg QE/g of dry raw materials, and the content of polyphenols was 6.73 ± 0.03 mg GAE/g. The antioxidant activity (ABTS test) reached 7.85 ± 0.04 mg TE/g. The concentration of fat-soluble and water-soluble vitamins was C—1.27 ± 0.12 mg/100 g, A—1.16 ± 0.11 mg/100 g and E—3.89 ± 0.38 mg/100 g. The IR characterization of plant raw materials and ash was carried out, the indicators of the elemental composition (TC, TOC, TIC, TN, TS) were determined. The totality of the obtained data indicates the phytochemical potential of Salicornia europaea L. growing in the territory of East Kazakhstan and may serve as a basis for further applied research.
Open AccessBioactive Compounds of Aboveground Organs Salicornia europaea L. of East Kazakhstan Flora
This study presents the phytochemical profile and antioxidant activity of the aboveground organs of Salicornia europaea L. collected from a natural population in East Kazakhstan. The chemical composition of the plant sample was studied using a complex of modern analytical methods, including HPLC, GC-MS, IR-Fourier spectroscopy, and elemental analysis. Metabolites were putatively annotated based on mass spectrometry data, corresponding to MSI level 2. It was found that the content of flavonoids was 2.40 ± 0.02 mg QE/g of dry raw materials, and the content of polyphenols was 6.73 ± 0.03 mg GAE/g. The antioxidant activity (ABTS test) reached 7.85 ± 0.04 mg TE/g. The concentration of fat-soluble and water-soluble vitamins was C—1.27 ± 0.12 mg/100 g, A—1.16 ± 0.11 mg/100 g and E—3.89 ± 0.38 mg/100 g. The IR characterization of plant raw materials and ash was carried out, the indicators of the elemental composition (TC, TOC, TIC, TN, TS) were determined. The totality of the obtained data indicates the phytochemical potential of Salicornia europaea L. growing in the territory of East Kazakhstan and may serve as a basis for further applied research.
- Open Access
- 18 May 2026
- Published by MDPI AG in Preprints.org
Bioactive Compounds of Salicornia europaea L Aboveground Organs of East Kazakhstan Flora
This work presents the study results of the phytochemical profile and antioxidant activity of aboveground organs of the East Kazakhstan population of Salicornia europaea L. The chemical composition of the plant sample was studied using a complex of modern analyt-ical methods, including HPLC, GC-MS, IR-Fourier spectroscopy, and elemental analysis. It was found that the content of flavonoids was 2.40 ± 0.02 mg QE/g of dry raw materials, and the content of polyphenols was 6.73 ± 0.03 mg GAE/g. The antioxidant activity (ABTS test) reached 7.85±0.04 mg TE/g. The concentration of fat-soluble and water-soluble vita-mins was: C - 1.27 ± 0.12 mg/100 g, A - 1.16 ± 0.11 mg/100 g and E - 3.89 ± 0.38 mg/100 g. The IR characterization of plant raw materials and ash was carried out, the indicators of the elemental composition (TC, TOC, TIC, TN, TS) were determined. The totality of the data obtained indicates the phytochemical potential of Salicornia europaea L., which grows in the territory of Eastern Kazakhstan, and substantiates the prospects of its use in the develop-ment of cosmetic and cosmeceutical products.
- 18 May 2026
- Published by MDPI AG in Preprints.org
Open AccessBioactive Compounds of Salicornia europaea L Aboveground Organs of East Kazakhstan Flora
This work presents the study results of the phytochemical profile and antioxidant activity of aboveground organs of the East Kazakhstan population of Salicornia europaea L. The chemical composition of the plant sample was studied using a complex of modern analyt-ical methods, including HPLC, GC-MS, IR-Fourier spectroscopy, and elemental analysis. It was found that the content of flavonoids was 2.40 ± 0.02 mg QE/g of dry raw materials, and the content of polyphenols was 6.73 ± 0.03 mg GAE/g. The antioxidant activity (ABTS test) reached 7.85±0.04 mg TE/g. The concentration of fat-soluble and water-soluble vita-mins was: C - 1.27 ± 0.12 mg/100 g, A - 1.16 ± 0.11 mg/100 g and E - 3.89 ± 0.38 mg/100 g. The IR characterization of plant raw materials and ash was carried out, the indicators of the elemental composition (TC, TOC, TIC, TN, TS) were determined. The totality of the data obtained indicates the phytochemical potential of Salicornia europaea L., which grows in the territory of Eastern Kazakhstan, and substantiates the prospects of its use in the develop-ment of cosmetic and cosmeceutical products.
- 1 January 2026
- Published by Engineered Science Publisher in Engineered Science
- Vol. ume 42 (Au, 2399
Elemental Composition and Biologically Active Substances of Spiraea hypericifolia L. Bark Native to Eastern Kazakhstan
Innovative profiling reveals Spiraea bark as a sustainable source of bioactive compounds, enabling eco-friendly pharmaceutical, cosmetic, and antioxidant applications.
- 1 January 2026
- Published by Engineered Science Publisher in Engineered Science
- Vol. ume 42 (Au, 2399
Elemental Composition and Biologically Active Substances of Spiraea hypericifolia L. Bark Native to Eastern Kazakhstan
Innovative profiling reveals Spiraea bark as a sustainable source of bioactive compounds, enabling eco-friendly pharmaceutical, cosmetic, and antioxidant applications.
- Open Access
- 10 October 2025
- Published by MDPI AG in Chemengineering
- Vol. 9 (5) , 109
Bitumen Extraction from Bituminous Sands by Ultrasonic Irradiation
This paper discusses the efficiency of ultrasonic-assisted bitumen extraction from bituminous sands of the Beke deposit (Mangistau region, Kazakhstan) using alkaline aqueous solutions. The process parameters, including ultrasonic frequency (22 kHz), power (up to 1500 W), solution pH (>12), and optimal NaOH concentration (1 wt.%) were optimized to achieve a maximum bitumen recovery of 98 wt.% within 8 min. The most effective sand-to-solution mass ratio was determined as 1:2, while the optimal process temperature was 75 °C. The application of ultrasound significantly enhances cavitation and reagent penetration, enabling efficient separation of bitumen with minimal chemical usage. Fourier-transform infrared (FTIR) spectroscopy and GC–MS analyses revealed the presence of aromatic hydrocarbons, paraffinic and naphthenic structures, as well as sulfur- and oxygen-containing functional groups (e.g., sulfoxides, carboxylic acids). These characteristics suggest moderate maturity and a high degree of aromaticity of the organic matter. Despite suitable thermal and compositional properties, the extracted bitumen exhibits a relatively low stiffness and softening point, indicating the need for additional upgrading (e.g., oxidation) prior to use in road construction. Although standard rheological tests (e.g., dynamic shear rhinometry) were not conducted in this study, the penetration and softening point values suggest a relatively soft binder, possibly unsuitable for high-temperature paving applications without modification. Future research will focus on rheological evaluation and oxidative upgrading to meet the ST RK 1373-2013 specification requirements.
- 10 October 2025
- Published by MDPI AG in Chemengineering
- Vol. 9 (5) , 109
Open AccessBitumen Extraction from Bituminous Sands by Ultrasonic Irradiation
This paper discusses the efficiency of ultrasonic-assisted bitumen extraction from bituminous sands of the Beke deposit (Mangistau region, Kazakhstan) using alkaline aqueous solutions. The process parameters, including ultrasonic frequency (22 kHz), power (up to 1500 W), solution pH (>12), and optimal NaOH concentration (1 wt.%) were optimized to achieve a maximum bitumen recovery of 98 wt.% within 8 min. The most effective sand-to-solution mass ratio was determined as 1:2, while the optimal process temperature was 75 °C. The application of ultrasound significantly enhances cavitation and reagent penetration, enabling efficient separation of bitumen with minimal chemical usage. Fourier-transform infrared (FTIR) spectroscopy and GC–MS analyses revealed the presence of aromatic hydrocarbons, paraffinic and naphthenic structures, as well as sulfur- and oxygen-containing functional groups (e.g., sulfoxides, carboxylic acids). These characteristics suggest moderate maturity and a high degree of aromaticity of the organic matter. Despite suitable thermal and compositional properties, the extracted bitumen exhibits a relatively low stiffness and softening point, indicating the need for additional upgrading (e.g., oxidation) prior to use in road construction. Although standard rheological tests (e.g., dynamic shear rhinometry) were not conducted in this study, the penetration and softening point values suggest a relatively soft binder, possibly unsuitable for high-temperature paving applications without modification. Future research will focus on rheological evaluation and oxidative upgrading to meet the ST RK 1373-2013 specification requirements.
- Open Access
- 30 September 2025
- Published by Shakarim University in Bulletin of Shakarim University. Technical Sciences
- No. 3(19),p. 564-573
STABILITY OF CATALYSTS IN THE PROCESS OF PHOTOCATALYTIC HYDROGEN PRODUCTION
This study focuses on enhancing the efficiency and stability of catalysts containing molybdenum (Mo) and tungsten (W) in the process of photocatalytic hydrogen production. Their structural, electronic, optical, and catalytic properties were thoroughly investigated. The development of low-cost and active catalysts for green hydrogen production is one of the key challenges in modern energy and environmental science. In this work, MoS₂- and WOx-based catalysts were synthesized via a hydrothermal method and subjected to thermal treatment at various temperatures. Their structural, morphological, and optical characteristics were comprehensively analyzed using advanced techniques such as Raman spectroscopy and UV-Vis. Hydrogen production reactions were carried out using a specially designed solar simulator, and the photocatalytic activity and stability of the catalysts were evaluated. The MoS-A320 sample demonstrated the highest hydrogen evolution activity (83 mL/h·g) and maintained 93% of its initial performance after five cycles, which is comparable to that of platinum-based catalysts. In contrast, WOx-based catalysts showed relatively lower activity. The results revealed that synthesis parameters and thermal treatment conditions have a significant influence on the properties of Mo- and W-based catalysts. This study represents an important step toward the development of efficient, stable, and affordable catalysts for green energy systems and water electrolysis. The findings offer new opportunities for designing cost-effective and high-performance Mo- and W-based catalysts.
- 30 September 2025
- Published by Shakarim University in Bulletin of Shakarim University. Technical Sciences
- No. 3(19),p. 564-573
Open AccessSTABILITY OF CATALYSTS IN THE PROCESS OF PHOTOCATALYTIC HYDROGEN PRODUCTION
This study focuses on enhancing the efficiency and stability of catalysts containing molybdenum (Mo) and tungsten (W) in the process of photocatalytic hydrogen production. Their structural, electronic, optical, and catalytic properties were thoroughly investigated. The development of low-cost and active catalysts for green hydrogen production is one of the key challenges in modern energy and environmental science. In this work, MoS₂- and WOx-based catalysts were synthesized via a hydrothermal method and subjected to thermal treatment at various temperatures. Their structural, morphological, and optical characteristics were comprehensively analyzed using advanced techniques such as Raman spectroscopy and UV-Vis. Hydrogen production reactions were carried out using a specially designed solar simulator, and the photocatalytic activity and stability of the catalysts were evaluated. The MoS-A320 sample demonstrated the highest hydrogen evolution activity (83 mL/h·g) and maintained 93% of its initial performance after five cycles, which is comparable to that of platinum-based catalysts. In contrast, WOx-based catalysts showed relatively lower activity. The results revealed that synthesis parameters and thermal treatment conditions have a significant influence on the properties of Mo- and W-based catalysts. This study represents an important step toward the development of efficient, stable, and affordable catalysts for green energy systems and water electrolysis. The findings offer new opportunities for designing cost-effective and high-performance Mo- and W-based catalysts.
- Open Access
The Effect of the Granulometric Composition of Slags on the Efficiency of Non-Ferrous Metal Extraction
The processing of metallurgical slags is an urgent task, as they contain residual amounts of precious and non-ferrous metals such as gold, silver, copper and zinc. The efficiency of extraction of these metals directly depends on the granulometric composition of the processed material, which determines the need for its detailed analysis. The purpose of this study is to analyze the effect of the granulometric composition of slags on the efficiency of extraction of non-ferrous metals using the flotation method. For this purpose, studies were carried out, including granulometric analysis, chemical composition analysis and flotation tests using Na2S, KAX and 3418A reagents. The analysis showed that the main part of the slag consisted of particles less than 3.36 mm, while the content of copper was 0.60%, zinc was 2.37%, gold was 0.1 g/t and silver was 7.2 g/t. Flotation experiments confirmed that the use of Na2S and 3418A increased the recoverability of copper and zinc, and reducing the particle size to d80 <10 microns increased the efficiency of copper extraction by 7%. Thus, the optimization of flotation processes and the control of granulometric composition make it possible to increase the efficiency of metallurgical waste processing, reduce losses of valuable metals and reduce the environmental burden.
Open AccessThe Effect of the Granulometric Composition of Slags on the Efficiency of Non-Ferrous Metal Extraction
The processing of metallurgical slags is an urgent task, as they contain residual amounts of precious and non-ferrous metals such as gold, silver, copper and zinc. The efficiency of extraction of these metals directly depends on the granulometric composition of the processed material, which determines the need for its detailed analysis. The purpose of this study is to analyze the effect of the granulometric composition of slags on the efficiency of extraction of non-ferrous metals using the flotation method. For this purpose, studies were carried out, including granulometric analysis, chemical composition analysis and flotation tests using Na2S, KAX and 3418A reagents. The analysis showed that the main part of the slag consisted of particles less than 3.36 mm, while the content of copper was 0.60%, zinc was 2.37%, gold was 0.1 g/t and silver was 7.2 g/t. Flotation experiments confirmed that the use of Na2S and 3418A increased the recoverability of copper and zinc, and reducing the particle size to d80 <10 microns increased the efficiency of copper extraction by 7%. Thus, the optimization of flotation processes and the control of granulometric composition make it possible to increase the efficiency of metallurgical waste processing, reduce losses of valuable metals and reduce the environmental burden.
- Open Access
- 15 May 2025
- Published by MDPI AG in Electrochem
- Vol. 6 (2) , 20
Investigation of Ionic Conductivity of Electrolytes for Anode-Free Lithium-Ion Batteries by Impedance Spectroscopy
Anode-free lithium-ion batteries offer a volumetric energy density approximately 60% higher than that of conventional lithium-ion cells. Despite this advantage, they often experience rapid capacity degradation and a limited cycle life. Optimizing electrolyte formulations—particularly through the use of specific additives, solvents, and lithium salts—is essential to improving these systems. This study explores electrolytes composed of fluorinated and carbonate-based solvents applied in anode-free lithium-ion cells featuring copper as the anode substrate and Li1.05Ni0.33Mn0.33Co0.33O2 as the cathode. In the present work, the ionic conductivity of electrolytes was studied by impedance spectroscopy, and the electrochemical parameters of anode-free lithium-ion cells were compared using these electrolyte solutions: lithium difluoro(oxalato)borat (LIDFOB) salts were used in a mixture of solvents such as fluoroethylene carbonate (FEC) and dimethoxyethane (DME) in a ratio of 3:7 and in a mixture of propylene carbonate (PC) and dimethoxyethane in a ratio of 3:7. Enhanced performance was observed upon the substitution of conventional carbonates with fluorinated co-solvents. The findings suggest that LiDFOB is a thermostable salt, and its high conductivity contributes to the formation and stabilization of the interface of solid electrolytes. The results indicate that at low temperature conditions, a double salt should be used for lithium current sources, for example, 0.4 M LiDFOB and 0.6 M LiBF4, as well as electrolyte additives such as fluoroethylene carbonate and lithium nitrate.
- 15 May 2025
- Published by MDPI AG in Electrochem
- Vol. 6 (2) , 20
Open AccessInvestigation of Ionic Conductivity of Electrolytes for Anode-Free Lithium-Ion Batteries by Impedance Spectroscopy
Anode-free lithium-ion batteries offer a volumetric energy density approximately 60% higher than that of conventional lithium-ion cells. Despite this advantage, they often experience rapid capacity degradation and a limited cycle life. Optimizing electrolyte formulations—particularly through the use of specific additives, solvents, and lithium salts—is essential to improving these systems. This study explores electrolytes composed of fluorinated and carbonate-based solvents applied in anode-free lithium-ion cells featuring copper as the anode substrate and Li1.05Ni0.33Mn0.33Co0.33O2 as the cathode. In the present work, the ionic conductivity of electrolytes was studied by impedance spectroscopy, and the electrochemical parameters of anode-free lithium-ion cells were compared using these electrolyte solutions: lithium difluoro(oxalato)borat (LIDFOB) salts were used in a mixture of solvents such as fluoroethylene carbonate (FEC) and dimethoxyethane (DME) in a ratio of 3:7 and in a mixture of propylene carbonate (PC) and dimethoxyethane in a ratio of 3:7. Enhanced performance was observed upon the substitution of conventional carbonates with fluorinated co-solvents. The findings suggest that LiDFOB is a thermostable salt, and its high conductivity contributes to the formation and stabilization of the interface of solid electrolytes. The results indicate that at low temperature conditions, a double salt should be used for lithium current sources, for example, 0.4 M LiDFOB and 0.6 M LiBF4, as well as electrolyte additives such as fluoroethylene carbonate and lithium nitrate.
- Open Access
- 13 May 2025
- Published by MDPI AG in Preprints.org
The Effect of the Granulometric Composition of Slags on the Efficiency of Non-Ferrous Metals’ Extraction
The processing of metallurgical slags is an urgent task, as they contain residual amounts of precious and non-ferrous metals such as gold, silver and copper. The efficiency of extraction of these metals directly depends on the granulometric composition of the processed material, which determines the need for its detailed analysis. The purpose of this study is to study the effect of the granulometric composition of slags on the efficiency of extraction of precious metals using various enrichment methods. For this purpose, studies were carried out, including granulometric analysis, chemical composition analysis, flotation tests using Na₂S and 3418A reagents, as well as magnetic separation. The analysis showed that the main part of the slag consists of particles less than 3.36 mm, while the content of copper is 0.60%, zinc – 2.37%, gold – 0.1 g/t, and silver – 7.2 g/t. Flotation experiments have confirmed that the use of Na₂S and 3418A increases the recoverability of copper and silver, and reducing the particle size to d80 <10 microns increases the efficiency of copper extraction by 7%. Magnetic separation did not have a significant effect on the concentration of non-ferrous metals, but it allowed us to isolate an iron-containing fraction suitable for further processing. Thus, optimization of flotation processes and control of granulometric composition make it possible to increase the efficiency of metallurgical waste processing, reduce losses of valuable metals and reduce the environmental burden.
- 13 May 2025
- Published by MDPI AG in Preprints.org
Open AccessThe Effect of the Granulometric Composition of Slags on the Efficiency of Non-Ferrous Metals’ Extraction
The processing of metallurgical slags is an urgent task, as they contain residual amounts of precious and non-ferrous metals such as gold, silver and copper. The efficiency of extraction of these metals directly depends on the granulometric composition of the processed material, which determines the need for its detailed analysis. The purpose of this study is to study the effect of the granulometric composition of slags on the efficiency of extraction of precious metals using various enrichment methods. For this purpose, studies were carried out, including granulometric analysis, chemical composition analysis, flotation tests using Na₂S and 3418A reagents, as well as magnetic separation. The analysis showed that the main part of the slag consists of particles less than 3.36 mm, while the content of copper is 0.60%, zinc – 2.37%, gold – 0.1 g/t, and silver – 7.2 g/t. Flotation experiments have confirmed that the use of Na₂S and 3418A increases the recoverability of copper and silver, and reducing the particle size to d80 <10 microns increases the efficiency of copper extraction by 7%. Magnetic separation did not have a significant effect on the concentration of non-ferrous metals, but it allowed us to isolate an iron-containing fraction suitable for further processing. Thus, optimization of flotation processes and control of granulometric composition make it possible to increase the efficiency of metallurgical waste processing, reduce losses of valuable metals and reduce the environmental burden.
- Open Access
Ultrasonic Technology for Hydrocarbon Raw Recovery and Processing
This review discusses recent research findings spanning the last two decades concerning ultrasonic technologies applicable to the oil, gas, and coal sectors. Various experiments conducted in laboratories have demonstrated the efficacy, cost-effectiveness, and environmental friendliness of ultrasound in recovering and processing oil, bitumen, coal, and oil shale. Ultrasound enhances formation permeability, coal gas permeability, and oil viscosity, particularly when delivered in short, powerful pulses at medium frequencies. Combining ultrasound with traditional recovery methods has shown promising results, boosting recovery efficiency by up to 100%. At the same time, ultrasonic treatment reduces the use of traditional reagents, thereby reducing environmental pollution. Moreover, ultrasound treatment shows potential in tasks such as separating oil–water emulsions, desulfurization, dewaxing oil, coal enrichment, and extracting valuable metals from metal-bearing shales through hydrometallurgical leaching. However, the widespread industrial implementation of ultrasonic technology necessitates further field and mathematical research.
Open AccessUltrasonic Technology for Hydrocarbon Raw Recovery and Processing
This review discusses recent research findings spanning the last two decades concerning ultrasonic technologies applicable to the oil, gas, and coal sectors. Various experiments conducted in laboratories have demonstrated the efficacy, cost-effectiveness, and environmental friendliness of ultrasound in recovering and processing oil, bitumen, coal, and oil shale. Ultrasound enhances formation permeability, coal gas permeability, and oil viscosity, particularly when delivered in short, powerful pulses at medium frequencies. Combining ultrasound with traditional recovery methods has shown promising results, boosting recovery efficiency by up to 100%. At the same time, ultrasonic treatment reduces the use of traditional reagents, thereby reducing environmental pollution. Moreover, ultrasound treatment shows potential in tasks such as separating oil–water emulsions, desulfurization, dewaxing oil, coal enrichment, and extracting valuable metals from metal-bearing shales through hydrometallurgical leaching. However, the widespread industrial implementation of ultrasonic technology necessitates further field and mathematical research.
- Open Access
- 27 September 2024
- Published by Shakarim University in Bulletin of Shakarim University. Technical Sciences
- No. 3(15),p. 374-380
BIOLOGICALLY ACTIVE SUBSTANCES OF WILD PLANTS MEDICINAL PLANT Salicornia europaea L., NATIVE TO THE ABAI REGION
The article presents the results of a study of the nominal part of the Salicornia europaea L. population growing in the Republic of Abai. An elemental analysis of plant raw materials was carried out, the content of total carbon, organic carbon, nitrogen and sulfur was determined. An alcoholic extract of vegetable raw materials was obtained in the Soxlet apparatus. The extract was filtered and used for chemical analysis. Qualitative reactions revealed the presence of a number of biologically active substances in the extract, such as proteins, terpenes and steroids, tannins, xanthones, phenolic compounds, flavonoids, carboxylic acids and caratinoids. The quantitative determination of flavonoids and catechins in the extract was carried out. The spectrophotometry method showed that the content of flavonoids in the plant extract in terms of quercetin is 0.31±0.03 µg/ml. The content of catechins in the extract was determined by liquid chromatography, which amounted to 34.01±3.40 µg/ml. The FRAP (Iron Reducing Antioxidant Power) method is used an antioxidant strategy. It has been shown that with an increase in the concentration of the extract from 0.01 to 0.05 mg/ml, the antioxidant activity increases. At an extract concentration of 0.05 mg/ml, the antioxidant activity is 3.084 mg AAE/ml of the extract. It is concluded that the plant can serve as a raw material for production of cosmeceutical products.
- 27 September 2024
- Published by Shakarim University in Bulletin of Shakarim University. Technical Sciences
- No. 3(15),p. 374-380
Open AccessBIOLOGICALLY ACTIVE SUBSTANCES OF WILD PLANTS MEDICINAL PLANT Salicornia europaea L., NATIVE TO THE ABAI REGION
The article presents the results of a study of the nominal part of the Salicornia europaea L. population growing in the Republic of Abai. An elemental analysis of plant raw materials was carried out, the content of total carbon, organic carbon, nitrogen and sulfur was determined. An alcoholic extract of vegetable raw materials was obtained in the Soxlet apparatus. The extract was filtered and used for chemical analysis. Qualitative reactions revealed the presence of a number of biologically active substances in the extract, such as proteins, terpenes and steroids, tannins, xanthones, phenolic compounds, flavonoids, carboxylic acids and caratinoids. The quantitative determination of flavonoids and catechins in the extract was carried out. The spectrophotometry method showed that the content of flavonoids in the plant extract in terms of quercetin is 0.31±0.03 µg/ml. The content of catechins in the extract was determined by liquid chromatography, which amounted to 34.01±3.40 µg/ml. The FRAP (Iron Reducing Antioxidant Power) method is used an antioxidant strategy. It has been shown that with an increase in the concentration of the extract from 0.01 to 0.05 mg/ml, the antioxidant activity increases. At an extract concentration of 0.05 mg/ml, the antioxidant activity is 3.084 mg AAE/ml of the extract. It is concluded that the plant can serve as a raw material for production of cosmeceutical products.