Bitumen Extraction from Bituminous Sands by Ultrasonic Irradiation
Open Access
- 10 October 2025
- journal article
- research article
- Published by MDPI AG in Chemengineering
- Vol. 9 (5) , 109
Abstract
This paper discusses the efficiency of ultrasonic-assisted bitumen extraction from bituminous sands of the Beke deposit (Mangistau region, Kazakhstan) using alkaline aqueous solutions. The process parameters, including ultrasonic frequency (22 kHz), power (up to 1500 W), solution pH (>12), and optimal NaOH concentration (1 wt.%) were optimized to achieve a maximum bitumen recovery of 98 wt.% within 8 min. The most effective sand-to-solution mass ratio was determined as 1:2, while the optimal process temperature was 75 °C. The application of ultrasound significantly enhances cavitation and reagent penetration, enabling efficient separation of bitumen with minimal chemical usage. Fourier-transform infrared (FTIR) spectroscopy and GC–MS analyses revealed the presence of aromatic hydrocarbons, paraffinic and naphthenic structures, as well as sulfur- and oxygen-containing functional groups (e.g., sulfoxides, carboxylic acids). These characteristics suggest moderate maturity and a high degree of aromaticity of the organic matter. Despite suitable thermal and compositional properties, the extracted bitumen exhibits a relatively low stiffness and softening point, indicating the need for additional upgrading (e.g., oxidation) prior to use in road construction. Although standard rheological tests (e.g., dynamic shear rhinometry) were not conducted in this study, the penetration and softening point values suggest a relatively soft binder, possibly unsuitable for high-temperature paving applications without modification. Future research will focus on rheological evaluation and oxidative upgrading to meet the ST RK 1373-2013 specification requirements.Keywords
Funding Information
- Science Committee of the Ministry of Science and Higher Education of the Republic of Kazakhstan (BR21882255)
This publication has 24 references indexed in Scilit:
- Asphaltenes and maltenes in crude oil and bitumen: A comprehensive review of properties, separation methods, and insights into structure, reactivity and agingFuel, 2024
- Study of thermal and photochemical aging of saturates, naphtenic-aromatics, resins, and asphaltene fractions of asphalt cement by FTIR and FT-ICR MSFuel, 2024
- Advances in ultrasonic treatment of oily sludge: mechanisms, industrial applications, and integration with combined treatment technologiesEnvironmental Science and Pollution Research, 2024
- Dissolved black carbon induced elimination of bisphenol a by peroxymonosulfate activation through HClO mediated oxidation processChemical Engineering Journal, 2022
- Semi-solid state promotes the methane production during anaerobic co-digestion of chicken manure with corn straw comparison to wet and high-solid stateJournal of Environmental Management, 2022
- Removal of elemental mercury from flue gas by recyclable CuCl2 modified magnetospheres catalyst from fly ash: Part 6. Commercial scale demonstration at a 1000MWth coal-fired power plantFuel, 2022
- Economic growth and renewable energy consumption nexus in G7 countries: Symmetric and asymmetric causality analysis in frequency domainJournal of Cleaner Production, 2022
- Research on mechanism and characteristics of oil recovery from oily sludge in ultrasonic fieldsJournal of Hazardous Materials, 2020
- Oil recovery from refinery oily sludge via ultrasound and freeze/thawJournal of Hazardous Materials, 2012
- Effect of clays and calcium ions on bitumen extraction from athabasca oil sands using flotationThe Canadian Journal of Chemical Engineering, 2000