Ravi Kant has a total of 58 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Development of laser ablation resistant coatings: A review on materials and methods

    by Saiful Wali Khan, Varun Kumar, Krishna Kant Pandey, Gaurav Rai, Ameey Anupam, Ekta Singla, Ravi Kant, Harpreet Singh

  • Experimental investigation and statistical modelling of cutting temperature with surface and tool morphological analyses in laser-assisted turning of Inconel X-750

    by Saleem Shaik, Gurabvaiah Punugupati, Ravi Kant, Hymavathi Madivada, Csp Rao

    Inconel X-750 is extensively used in aerospace, nuclear and power generation industries because of its excellent mechanical strength and oxidation resistance at elevated temperatures. However, its high strength, work-hardening tendency and poor thermal conductivity make conventional machining difficult. Laser-assisted turning (LAT) has been widely adopted to improve the machinability of hard-to-cut materials. The influence of machining parameters on cutting temperature and the associated changes in surface and tool morphology during LAT of Inconel X-750 have not been systematically investigated. In this study, LAT experiments were performed on Inconel X-750 using a Taguchi L27 orthogonal array by considering laser power, spindle speed, feed rate and depth of cut (DoC) as the machining variables, with cutting temperature selected as the primary response. The experimental data were analysed using analysis of variance and regression analysis to establish the relationship between machining parameters and cutting temperature. Scanning electron microscopy and microhardness measurements were used to characterize the machined surface and cutting tool. Laser power had the greatest influence on cutting temperature, contributing 84.11%, followed by DoC (6.38%). The regression model showed good agreement with the experimental results, with an R 2 value of 97.57%. The validation test confirmed the model with an accuracy of 94.83%. Moderate cutting temperatures produced more uniform surface morphology, whereas excessive temperatures promoted material smearing, adhesion and diffusion-related changes on the cutting tool. LAT reduced the microhardness because of thermal softening, although the hardness remained above the annealed condition of the alloy.

  • Thermal and microstructural analysis of laser remelting of cold-sprayed copper coating

    by Jitendra Kumar, Pawan Kumar, Dhruva Kumar Goyal, Ravi Kant, Harpreet Singh

  • Open Access

    Mechanistic insights into the corrosion of heat-treated wollastonite-zirconia coatings reinforced with carbon nanotubes

    by Avneesh Kumar, Sumitkumar Rathor, Saminderpreet Singh, Ravi Kant, Harpreet Singh, Marek Vostrak, Sarka Houdkova


  • A Critical Review on Ultrasonic Assisted Electric Discharge Machining and Various Processes

    by Saidaiah Kalakonda, P. Sudhakar Rao, Ravi Kant

    In the previous many years, several attempts have been made to enhance the effectiveness of the Spark erosion machining process. This review clearly mentioned all the work outputs of Vibration Assisted Electric Discharge Machining at a glance. One of these non-traditional machining techniques, called electric discharge machining (EDM), produces higher surface finishes, high levels of precision, and machinability. Ultrasonic vibrations are used in many industrial processes, such as material removal operations for form generation on material surfaces. Lately, there has been an increasing trend toward using ultrasonic vibration to enhance process performance. Ultrasonic vibration finds noteworthy application in industrial processes such as spark erosion machining, where vibration is enhanced by using ultrasonic waves as a medium. The electrode's ultrasonic vibration modifies the discharge gap and improves the chip removal capability, making it a very effective technique for raising EDM efficiency. An overview of the literature on the application of ultrasonic vibrations in electric discharge machining is presented in this article. Review work has been done on how ultrasonic vibrations can be applied, their ability to affect performance metrics, how to predict and optimise processes, and how to use them with advanced materials that can be difficult to cut. Future requirements for research have been highlighted to increase the ability and potential for the technique of electric discharge machining based on an evaluation of the present state of ultrasonic-assisted electric discharge machining.


  • NiTi wire welding using Fe, Cu and Ni fillers: multi-objective modelling and AHP–entropy approach to sustainability evaluation

    by Soumya Ranjan Parimanik, Debadutta Mishra, Trupti Ranjan Mahapatra, Sumitkumar Rathor, Ravi Kant

    Purpose: This research introduces a comprehensive framework for optimising fibre laser butt welding of NiTi shape memory alloy (SMA) wires, integrating experimental studies, predictive modelling and sustainability evaluation, with particular focus on the tensile strength–corrosion trade-off. Design/methodology/approach: A 43-run central composite design (CCD) experiment was conducted to assess how laser power, pulse duration, frequency, wire diameter and filler powder types (Fe/Cu/Ni) influence tensile strength and corrosion rate. The resulting response patterns were examined using ANOVA and Pareto charts, and three modelling methods – adaptive neuro-fuzzy inference system (ANFIS), particle swarm optimised ANFIS (PSO-ANFIS) and Gaussian process regression (GPR) – were compared. A hybrid AHP–entropy approach was used to benchmark the sustainability of different welding techniques. Findings: ANOVA and Pareto analysis confirmed pulse time, frequency and power as dominant factors for both responses. Fe filler produced tensile strengths over 400 MPa, while Ni filler had the lowest corrosion rate (∼0.001298 mm/year) and more uniform weld microstructures, showing a strength–corrosion trade-off. GPR model outperformed others with high accuracy for tensile strength (R2 = 0.8752; RMSE = 23.9706 MPa) and corrosion rate (R2 = 0.9565; RMSE = 0.0001 mm/year). Confirmatory tests supported predictions, and fibre laser welding was ranked most sustainable. Practical implications: The integration of predictive modelling with sustainability evaluation offers a strong tool for optimising technical performance and environmental impact in NiTi SMA welding. This study's insights are vital for industrial engineering, where high-performance materials and sustainable manufacturing improve reliability, cut costs and ensure environmental compliance. Originality/value: The proposed methodology offers a novel comparative perspective on modelling strategies, supporting informed decision-making in advanced manufacturing using a relatively small dataset.


  • Evaluating surface roughness and hardness of Inconel 718: A comparative study of traditional EDM oil versus graphite mixed EDM oil

    by Saidaiah Kalakonda, P. Sudhakar Rao, Ravi Kant

    In this experimental research, the surface roughness and Hardness of Inconel 718 material were studied by varying four input process parameters in Electro Discharge Machining (EDM) and Powder Mixed Electro Discharge Machining (PMEDM). The input parameters are discharge current, pulse-on time, pulse-off time, and flushing pressure. Two dielectrics are used in this work. One is ST EDM oil, and the second is Graphite mixed EDM oil. The study is specifically designed to determine the optimised values of input process parameters for the best output responses, including Surface Roughness (SR) and Hardness. This experimental research elaborates on a comparative study between the two dielectrics. The One Factor at a Time (OFAT) approach is used to determine the approximate range values. Range values of discharge current fixed 7.80–10.92 A, 500–1000 µs range values are fixed for pulse on time, 150–300 µs range value selected for pulse off time, 0.084–0.140 bar fixed for flushing pressure to record low values of SR and average values of Hardness.

  • A Specific Review on Inconel 718 Super Alloy Machining by EDM Process

    by Saidaiah Kalakonda, P. Sudhakar Rao, Ravi Kant

  • Open Access

    Numerical Evaluation of Roughness Effect on the Thermal Performance of the Schwarz-P-Based TPMS Heat Sink

    by Syed Hammad Mian, Chandrakant K. Nirala, Ravi Kant, Usama Umer, Hreetabh Kishore

    Triply Periodic Minimal Surfaces (TPMSs) offer compact geometry and enhanced thermal performance, making them attractive for heat sink applications. However, their complex structures pose manufacturing challenges, typically addressed through additive manufacturing (AM), which inherently produces rough-textured surfaces. While surface roughness significantly influences heat transfer, most numerical studies assume smooth surfaces. While some earlier studies have established the impact of surface roughness on heat transfer, they often overlook the overestimation of heat transfer enhancements. This oversight leads to inaccuracies in predicting the actual thermal performance of these structures. By addressing this gap, this work provides an accurate assessment of the influence of surface roughness on TPMS heat sinks thermal performance. A computational fluid dynamics (CFD) model using the SST k-ω turbulence model with surface roughness and thermal correction is developed. The findings demonstrate that surface roughness enhances thermal performance; for instance, a Schwarz-P heat sink with roughness of 20 μm shows an improvement of approximately 18%. In addition, neglecting the thermal correction in the surface roughness model leads to an overestimation of the heat transfer coefficient by about 13% for the same roughness level. The superior thermal performance of rough-surface heat sinks is attributed to higher effective heat transfer area and increased turbulent kinetic energy, which collectively enhance the heat transfer coefficient, but at the expense of a higher pressure drop. The study provides valuable insights but also highlights the scope for further research. Future investigations should prioritize validating numerical results through experimental testing, exploring alternative roughness models, and incorporating additional empirical relationships to translate measured surface roughness values effectively.