Stephen C. Myers
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Stephen C. Myers has a total of 34 co-authors. Here are the top co-authors by number of shared publications:
- Brian Young
Sandia National Laboratories, Global Threat Reduction, Albuquerque, USA
5 shared publications - Michael Lee Begnaud
Los Alamos National Lab. (LANL), Los Alamos, NM (United States)
4 shared publications James R. Hipp
Sandia National Laboratories, Global Threat Reduction, Albuquerque, USA
3 shared publications- William Scott Phillips
Los Alamos National Laboratory (LANL), Los Alamos, NM (United States)
3 shared publications - Ana C. Aguiar
Lawrence Livermore National Laboratory, Livermore, California, U.S.A.
2 shared publications - Andrea Chiang
Lawrence Livermore National Laboratory, Livermore, California, U.S.A.
2 shared publications
Latest Publications
- Open Access
- 10 December 2025
- Published by Oxford University Press (OUP) in Geophysical Journal International
- Vol. 244 (2)
Data-informed grid refinement to improve traveltime accuracy in the regional seismic traveltime (RSTT) model
SUMMARY: The regional seismic traveltime (RSTT) model predicts traveltimes of regional seismic phases accounting for 3-D structure of the crust and the upper mantle on a global scale. Previous versions of the RSTT model have been implemented using nodes separated by ∼1° spacing across the globe. A regional-scale study using regional Pn and Pg traveltimes across Israel and the Middle East demonstrated that data driven, systematic grid refinement reduces traveltime residuals and enhances resolution of smaller tectonic features in regions having dense ray coverage. High density Pn ray coverage in the western US, Europe, Middle East and East Asia can likewise provide the resolution that allows systematic global grid refinement of the RSTT model. In this study, we use a large number of Pn ray paths originating from events located with an epicentral location uncertainty of 25 km (GT25) or better. We conduct targeted grid refinements at 1.0°, 0.5°, 0.25° and 0.125° on a global scale, producing a refined RSTT model that yields a 21.6 per cent reduction in median event location error in Europe and the Middle East, when compared with the original global RSTT model presented in Begnaud et al. The new model also resolves finer tectonic structures in regions with high Pn ray density.
- 10 December 2025
- Published by Oxford University Press (OUP) in Geophysical Journal International
- Vol. 244 (2)
Open AccessData-informed grid refinement to improve traveltime accuracy in the regional seismic traveltime (RSTT) model
SUMMARY: The regional seismic traveltime (RSTT) model predicts traveltimes of regional seismic phases accounting for 3-D structure of the crust and the upper mantle on a global scale. Previous versions of the RSTT model have been implemented using nodes separated by ∼1° spacing across the globe. A regional-scale study using regional Pn and Pg traveltimes across Israel and the Middle East demonstrated that data driven, systematic grid refinement reduces traveltime residuals and enhances resolution of smaller tectonic features in regions having dense ray coverage. High density Pn ray coverage in the western US, Europe, Middle East and East Asia can likewise provide the resolution that allows systematic global grid refinement of the RSTT model. In this study, we use a large number of Pn ray paths originating from events located with an epicentral location uncertainty of 25 km (GT25) or better. We conduct targeted grid refinements at 1.0°, 0.5°, 0.25° and 0.125° on a global scale, producing a refined RSTT model that yields a 21.6 per cent reduction in median event location error in Europe and the Middle East, when compared with the original global RSTT model presented in Begnaud et al. The new model also resolves finer tectonic structures in regions with high Pn ray density.
- 15 August 2025
- Published by Seismological Society of America (SSA) in Seismological Research Letters
- Vol. 97 (1) , 514-523
PySolate : A Python-Based Thresholding Tool to Denoise or Designal Seismic Waveforms Based on the Continuous Wavelet Transform
PySolate is a Python-based toolset that implements the continuous wavelet transform and nonlinear thresholding operations to denoise or designal seismic data, following Langston and Mousavi (2019). This filtering approach can remove microseismic noise to isolate intermediate-period seismic signals that are key to enabling full-waveform modeling and analysis of smaller-magnitude regional events. This approach is best for the application to signals with frequency or time separation of signal and noise, in contrast to Fourier analysis, which is effective when signal and noise are separated in frequency. We demonstrate the Python toolset using the six announced Democratic People’s Republic of Korea declared nuclear tests, showing the effectiveness of isolating the seismic signal compared to standard bandpass filtering. We also demonstrate the ease of using the toolset with any Python processing tools.
- 15 August 2025
- Published by Seismological Society of America (SSA) in Seismological Research Letters
- Vol. 97 (1) , 514-523
PySolate : A Python-Based Thresholding Tool to Denoise or Designal Seismic Waveforms Based on the Continuous Wavelet Transform
PySolate is a Python-based toolset that implements the continuous wavelet transform and nonlinear thresholding operations to denoise or designal seismic data, following Langston and Mousavi (2019). This filtering approach can remove microseismic noise to isolate intermediate-period seismic signals that are key to enabling full-waveform modeling and analysis of smaller-magnitude regional events. This approach is best for the application to signals with frequency or time separation of signal and noise, in contrast to Fourier analysis, which is effective when signal and noise are separated in frequency. We demonstrate the Python toolset using the six announced Democratic People’s Republic of Korea declared nuclear tests, showing the effectiveness of isolating the seismic signal compared to standard bandpass filtering. We also demonstrate the ease of using the toolset with any Python processing tools.
- 20 June 2025
- Published by Seismological Society of America (SSA) in Seismological Research Letters
- Vol. 96 (6) , 3762-3773
Anomaly Detection in Seismic Data with Deep Learning: Application for Instrument Failure Detection and Forecasting
Seismic data quality assessment (QA) is the first and one of the most important steps before conducting any further data analysis. Traditional methods involve checking various metrics, such as spike detection and power spectral density, by setting strict thresholds or comparing data against synthetic benchmarks. However, these approaches often rely on pre-existing knowledge and assumptions about data anomalies, leading to potential misclassification of unusual cases. Here, we propose a deep autoencoder model, an unsupervised learning approach that evaluates data quality without making assumptions about normal and anomalous data, which can be used to identify deviations in recorded data that may indicate nascent instrument failure. We test the model with the U.S. International Monitoring System (IMS) seismic stations and demonstrate the capability of detecting anomalies on a monthly scale. This could prompt station operators to examine potential problems early, allowing sufficient time for instrument maintenance to prevent data outages. In addition, we use a new manually selected testing dataset to compare our model performance against two supervised machine learning (ML) approaches and a standard QA package, as baseline models. When applied to the dataset containing known data anomalies, performance of the supervised and unsupervised ML approaches is similar, with an accuracy of 88.1% for our model compared to ∼90% for the supervised ML approach and 78.2% for the standard QA package. Our model outperforms the baseline models when applied to new stations, where new types of data anomalies can be station-specific and not included in the training dataset. Finally, we show model transferability by training the model with data from the Global Seismograph Network only and applying it to the IMS network data. The results suggest that our model is generalizable and can be applied to new stations with good accuracy.
- 20 June 2025
- Published by Seismological Society of America (SSA) in Seismological Research Letters
- Vol. 96 (6) , 3762-3773
Anomaly Detection in Seismic Data with Deep Learning: Application for Instrument Failure Detection and Forecasting
Seismic data quality assessment (QA) is the first and one of the most important steps before conducting any further data analysis. Traditional methods involve checking various metrics, such as spike detection and power spectral density, by setting strict thresholds or comparing data against synthetic benchmarks. However, these approaches often rely on pre-existing knowledge and assumptions about data anomalies, leading to potential misclassification of unusual cases. Here, we propose a deep autoencoder model, an unsupervised learning approach that evaluates data quality without making assumptions about normal and anomalous data, which can be used to identify deviations in recorded data that may indicate nascent instrument failure. We test the model with the U.S. International Monitoring System (IMS) seismic stations and demonstrate the capability of detecting anomalies on a monthly scale. This could prompt station operators to examine potential problems early, allowing sufficient time for instrument maintenance to prevent data outages. In addition, we use a new manually selected testing dataset to compare our model performance against two supervised machine learning (ML) approaches and a standard QA package, as baseline models. When applied to the dataset containing known data anomalies, performance of the supervised and unsupervised ML approaches is similar, with an accuracy of 88.1% for our model compared to ∼90% for the supervised ML approach and 78.2% for the standard QA package. Our model outperforms the baseline models when applied to new stations, where new types of data anomalies can be station-specific and not included in the training dataset. Finally, we show model transferability by training the model with data from the Global Seismograph Network only and applying it to the IMS network data. The results suggest that our model is generalizable and can be applied to new stations with good accuracy.
- 9 November 2023
- Published by Seismological Society of America (SSA) in Bulletin of the Seismological Society of America
- Vol. 114 (2) , 857-872
Relocation of the Seismicity of the Caucasus Region
Our objective is to improve the view of the seismicity in the Caucasus region using instrumental data between 1951 and 2019. To create a comprehensive catalog, we combine the bulletins of local agencies and the International Seismological Centre, and use an advanced single-event location algorithm, iLoc, to obtain better locations. We show that relocations with iLoc, using travel-time predictions from the 3D upper mantle velocity model, Regional Seismic Travel Time, improve the locations. Then, using the iLoc results as initial locations and the ground-truth events identified in the iLoc results as fix points, we apply Bayesloc, a multiple-event location algorithm, to simultaneously relocate the entire seismicity of the Caucasus region. We demonstrate that the simultaneous relocation of the seismicity with Bayesloc clarifies the location and geometry of major active structures accommodating ongoing convergence between the Arabian and Eurasian continents between the Black and Caspian Seas. Among our major findings is the confirmation of widespread seismicity in the mantle beneath the northern flank of the Greater Caucasus and central Caspian, resulting from north-dipping subduction of the Kura and South Caspian basins and the identification of a discrete band of crustal seismicity beneath the southern flank of the Greater Caucasus.
- 9 November 2023
- Published by Seismological Society of America (SSA) in Bulletin of the Seismological Society of America
- Vol. 114 (2) , 857-872
Relocation of the Seismicity of the Caucasus Region
Our objective is to improve the view of the seismicity in the Caucasus region using instrumental data between 1951 and 2019. To create a comprehensive catalog, we combine the bulletins of local agencies and the International Seismological Centre, and use an advanced single-event location algorithm, iLoc, to obtain better locations. We show that relocations with iLoc, using travel-time predictions from the 3D upper mantle velocity model, Regional Seismic Travel Time, improve the locations. Then, using the iLoc results as initial locations and the ground-truth events identified in the iLoc results as fix points, we apply Bayesloc, a multiple-event location algorithm, to simultaneously relocate the entire seismicity of the Caucasus region. We demonstrate that the simultaneous relocation of the seismicity with Bayesloc clarifies the location and geometry of major active structures accommodating ongoing convergence between the Arabian and Eurasian continents between the Black and Caspian Seas. Among our major findings is the confirmation of widespread seismicity in the mantle beneath the northern flank of the Greater Caucasus and central Caspian, resulting from north-dipping subduction of the Kura and South Caspian basins and the identification of a discrete band of crustal seismicity beneath the southern flank of the Greater Caucasus.
- Open Access
- 18 September 2023
- Published by Oxford University Press (OUP) in Geophysical Journal International
- Vol. 235 (3) , 2862-2869
Emulation of seismic-phase traveltimes with machine learning
SUMMARY: We present a machine learning (ML) method for emulating seismic-phase traveltimes that are computed using a global-scale 3-D earth model and physics-based ray tracing. Accurate traveltime predictions based on 3-D earth models are known to reduce the bias of event location estimates, increase our ability to assign phase labels to seismic detections and associate detections to events. However, practical use of 3-D models is challenged by slow computational speed and the unwieldiness of pre-computed lookup tables that are often large and have prescribed computational grids. In this work, we train a ML emulator using pre-computed traveltimes, resulting in a compact and computationally fast way to approximate traveltimes that are based on a 3-D earth model. Our model is trained using approximately 850 million P-wave traveltimes that are based on the global LLNL-G3D-JPS model, which was developed for more accurate event location. The training-set consists of traveltimes between 10 393 global seismic stations and randomly sampled event locations that provide a prescribed, distance-dependent geographic sample density for each station. Prediction accuracy is dependent on event-station distance and whether the station was included in the training set. For stations included in the training set the mean absolute deviation (MAD) of the difference between traveltimes computed using ray tracing through the 3-D model and the ML emulator for local, regional, and teleseismic distances are 0.090, 0.125 and 0.121 s, respectively. For tested station locations not included in the training set, MAD values for the three distance ranges increase to 0.173, 0.219 and 0.210 s, respectively. Empirical traveltime residuals for a global reference data are indistinguishable when ML emulation or the 3-D model is used to compute traveltimes. This result holds regardless of whether the recording station is used in ML training or not.
- 18 September 2023
- Published by Oxford University Press (OUP) in Geophysical Journal International
- Vol. 235 (3) , 2862-2869
Open AccessEmulation of seismic-phase traveltimes with machine learning
SUMMARY: We present a machine learning (ML) method for emulating seismic-phase traveltimes that are computed using a global-scale 3-D earth model and physics-based ray tracing. Accurate traveltime predictions based on 3-D earth models are known to reduce the bias of event location estimates, increase our ability to assign phase labels to seismic detections and associate detections to events. However, practical use of 3-D models is challenged by slow computational speed and the unwieldiness of pre-computed lookup tables that are often large and have prescribed computational grids. In this work, we train a ML emulator using pre-computed traveltimes, resulting in a compact and computationally fast way to approximate traveltimes that are based on a 3-D earth model. Our model is trained using approximately 850 million P-wave traveltimes that are based on the global LLNL-G3D-JPS model, which was developed for more accurate event location. The training-set consists of traveltimes between 10 393 global seismic stations and randomly sampled event locations that provide a prescribed, distance-dependent geographic sample density for each station. Prediction accuracy is dependent on event-station distance and whether the station was included in the training set. For stations included in the training set the mean absolute deviation (MAD) of the difference between traveltimes computed using ray tracing through the 3-D model and the ML emulator for local, regional, and teleseismic distances are 0.090, 0.125 and 0.121 s, respectively. For tested station locations not included in the training set, MAD values for the three distance ranges increase to 0.173, 0.219 and 0.210 s, respectively. Empirical traveltime residuals for a global reference data are indistinguishable when ML emulation or the 3-D model is used to compute traveltimes. This result holds regardless of whether the recording station is used in ML training or not.
- 27 July 2022
- Published by Seismological Society of America (SSA) in Bulletin of the Seismological Society of America
- Vol. 112 (5) , 2425-2439
Seismic Tomographic Modeling of the Crust and Upper Mantle beneath Israel and the Middle East: Improved Resolution through Optimized Model Parameterization
Accurate regional seismic travel‐time (RSTT) predictions rely on regional phases (e.g., Pg, Lg, Pn, Sn) to account for 3D effects in the crust and upper mantle that are not captured by 1D models traditionally used for real‐time location. The RSTT prediction model accounts for regional‐scale crust and upper mantle structure globally by incorporating regional seismic phases into its travel‐time calculations. Previous versions of the RSTT model have used a constant grid cell size of 1°. To improve the tomographic accuracy of recovering velocity structure at regional scales, we perform data‐driven grid refinement on the RSTT model down to a 0.125° grid (∼14 km) in pursuit of two main goals: (1) to test the limits of RSTT capability and accuracy of determined velocity structure through variable grid refinement and (2) to image smaller structures in Israel and the Middle East and illuminate upper mantle dynamics operating in this complex tectonic area. We investigate the effects of model parameterization as grid cell size decreases and the trade‐offs between recovered velocity structures. Our final dataset includes 4751 events and 499 stations that recorded 79,344 Pn and 7489 Pg. The variable grid refinement method allows recovery of finer‐scale velocity structures and reduces travel‐time residuals in areas with the highest data coverage. At smaller grid cell sizes, longer paths need to be upweighted to stabilize the inversion. Results illuminate tectonic features undefined in coarser grid‐size models; in particular, we observe mantle perturbations related to the subduction zone around the Cyprian arc and crustal anomalies near the Dead Sea fault and throughout the Anatolian plate.
- 27 July 2022
- Published by Seismological Society of America (SSA) in Bulletin of the Seismological Society of America
- Vol. 112 (5) , 2425-2439
Seismic Tomographic Modeling of the Crust and Upper Mantle beneath Israel and the Middle East: Improved Resolution through Optimized Model Parameterization
Accurate regional seismic travel‐time (RSTT) predictions rely on regional phases (e.g., Pg, Lg, Pn, Sn) to account for 3D effects in the crust and upper mantle that are not captured by 1D models traditionally used for real‐time location. The RSTT prediction model accounts for regional‐scale crust and upper mantle structure globally by incorporating regional seismic phases into its travel‐time calculations. Previous versions of the RSTT model have used a constant grid cell size of 1°. To improve the tomographic accuracy of recovering velocity structure at regional scales, we perform data‐driven grid refinement on the RSTT model down to a 0.125° grid (∼14 km) in pursuit of two main goals: (1) to test the limits of RSTT capability and accuracy of determined velocity structure through variable grid refinement and (2) to image smaller structures in Israel and the Middle East and illuminate upper mantle dynamics operating in this complex tectonic area. We investigate the effects of model parameterization as grid cell size decreases and the trade‐offs between recovered velocity structures. Our final dataset includes 4751 events and 499 stations that recorded 79,344 Pn and 7489 Pg. The variable grid refinement method allows recovery of finer‐scale velocity structures and reduces travel‐time residuals in areas with the highest data coverage. At smaller grid cell sizes, longer paths need to be upweighted to stabilize the inversion. Results illuminate tectonic features undefined in coarser grid‐size models; in particular, we observe mantle perturbations related to the subduction zone around the Cyprian arc and crustal anomalies near the Dead Sea fault and throughout the Anatolian plate.
- 8 June 2021
- Published by Seismological Society of America (SSA) in Bulletin of the Seismological Society of America
- Vol. 111 (5) , 2862-2880
Empirical Acoustic Source Model for Chemical Explosions in Air
Chemical explosions generate pressure disturbances in air that radiate as nonlinear shock waves near the source and transition into acoustic waves with distance. Because low-frequency acoustic waves generally travel large distances without significant loss of energy, they are often used for explosion monitoring and yield estimation. However, quantitative relationships between acoustic energy and explosion yields are required for accurate yield estimation. Here, we develop an empirical acoustic source model for chemical explosions from experimental data. The empirical model returns the acoustic pressure waveform for the detonation of 1 kg of trinitrotoluene, which is conventionally used to represent the explosive release of 4.184 MJ of explosion energy. The full-waveform model can be used to predict acoustic signals for an arbitrary yield of a high-explosive detonation based on the standard scaling law and to estimate acoustic energies in a specific frequency range. We evaluate the accuracy of the acoustic source model independently by estimating the yield of other explosive events that are not included in the model development. Statistical characteristics of the model and their implications for the uncertainty quantification of estimated yields are discussed.
- 8 June 2021
- Published by Seismological Society of America (SSA) in Bulletin of the Seismological Society of America
- Vol. 111 (5) , 2862-2880
Empirical Acoustic Source Model for Chemical Explosions in Air
Chemical explosions generate pressure disturbances in air that radiate as nonlinear shock waves near the source and transition into acoustic waves with distance. Because low-frequency acoustic waves generally travel large distances without significant loss of energy, they are often used for explosion monitoring and yield estimation. However, quantitative relationships between acoustic energy and explosion yields are required for accurate yield estimation. Here, we develop an empirical acoustic source model for chemical explosions from experimental data. The empirical model returns the acoustic pressure waveform for the detonation of 1 kg of trinitrotoluene, which is conventionally used to represent the explosive release of 4.184 MJ of explosion energy. The full-waveform model can be used to predict acoustic signals for an arbitrary yield of a high-explosive detonation based on the standard scaling law and to estimate acoustic energies in a specific frequency range. We evaluate the accuracy of the acoustic source model independently by estimating the yield of other explosive events that are not included in the model development. Statistical characteristics of the model and their implications for the uncertainty quantification of estimated yields are discussed.
- 9 April 2021
- Published by Springer Nature in Pure and Applied Geophysics
- Vol. 178 (7) , 2499-2525
Correction to: Updates to the Regional Seismic Travel Time (RSTT) Model: 2. Path-dependent Travel-time Uncertainty
- 9 April 2021
- Published by Springer Nature in Pure and Applied Geophysics
- Vol. 178 (7) , 2499-2525
Correction to: Updates to the Regional Seismic Travel Time (RSTT) Model: 2. Path-dependent Travel-time Uncertainty
- Open Access
- 25 January 2021
- Published by Springer Nature in Pure and Applied Geophysics
- Vol. 178 (2) , 313-339
Updates to the Regional Seismic Travel Time (RSTT) Model: 2. Path-dependent Travel-time Uncertainty
The regional seismic travel time (RSTT) model and software were developed to improve travel-time prediction accuracy by accounting for three-dimensional crust and upper mantle structure. Travel-time uncertainty estimates are used in the process of associating seismic phases to events and to accurately calculate location uncertainty bounds (i.e. event location error ellipses). We improve on the current distance-dependent uncertainty parameterization for RSTT using a random effects model to estimate slowness (inverse velocity) uncertainty as a mean squared error for each model parameter. The random effects model separates the error between observed slowness and model predicted slowness into bias and random components. The path-specific travel-time uncertainty is calculated by integrating these mean squared errors along a seismic-phase ray path. We demonstrate that event location error ellipses computed for a 90% coverage ellipse metric (used by the Comprehensive Nuclear-Test-Ban Treaty Organization International Data Centre (IDC)), and using the path-specific travel-time uncertainty approach, are more representative (median 82.5% ellipse percentage) of true location error than error ellipses computed using distance-dependent travel-time uncertainties (median 70.1%). We also demonstrate measurable improvement in location uncertainties using the RSTT method compared to the current station correction approach used at the IDC (median 74.3% coverage ellipse).
- 25 January 2021
- Published by Springer Nature in Pure and Applied Geophysics
- Vol. 178 (2) , 313-339
Open AccessUpdates to the Regional Seismic Travel Time (RSTT) Model: 2. Path-dependent Travel-time Uncertainty
The regional seismic travel time (RSTT) model and software were developed to improve travel-time prediction accuracy by accounting for three-dimensional crust and upper mantle structure. Travel-time uncertainty estimates are used in the process of associating seismic phases to events and to accurately calculate location uncertainty bounds (i.e. event location error ellipses). We improve on the current distance-dependent uncertainty parameterization for RSTT using a random effects model to estimate slowness (inverse velocity) uncertainty as a mean squared error for each model parameter. The random effects model separates the error between observed slowness and model predicted slowness into bias and random components. The path-specific travel-time uncertainty is calculated by integrating these mean squared errors along a seismic-phase ray path. We demonstrate that event location error ellipses computed for a 90% coverage ellipse metric (used by the Comprehensive Nuclear-Test-Ban Treaty Organization International Data Centre (IDC)), and using the path-specific travel-time uncertainty approach, are more representative (median 82.5% ellipse percentage) of true location error than error ellipses computed using distance-dependent travel-time uncertainties (median 70.1%). We also demonstrate measurable improvement in location uncertainties using the RSTT method compared to the current station correction approach used at the IDC (median 74.3% coverage ellipse).
- Open Access
- 9 November 2020
- Published by Springer Nature in Pure and Applied Geophysics
- Vol. 178 (7) , 2475-2498
Updates to the Regional Seismic Travel Time (RSTT) Model: 1. Tomography
A function of global monitoring of nuclear explosions is the development of Earth models for predicting seismic travel times for more accurate calculation of event locations. Most monitoring agencies rely on fast, distance-dependent one-dimensional (1D) Earth models to calculate seismic event locations quickly and in near real-time. RSTT (Regional Seismic Travel Time) is a seismic velocity model and computer software package that captures the major effects of three-dimensional crust and upper mantle structure on regional seismic travel times, while still allowing for fast prediction speed (milliseconds). We describe updates to the RSTT model using a refined data set of regional phases (i.e., Pn, Pg, Sn, Lg) using theBayeslocrelative relocation algorithm. The tomographic inversion shown here acts to refine the previous RSTT public model (rstt201404um) and displays significant features related to areas of global tectonic complexity as well as further reduction in arrival residual values. Validation of the updated RSTT model demonstrates significant reduction in median epicenter mislocation (15.3 km) using all regional phases compared to theiasp911D model (22.1 km) as well as to the current station correction approach used at the Comprehensive Nuclear-Test-Ban Treaty Organization International Data Centre (18.9 km).
- 9 November 2020
- Published by Springer Nature in Pure and Applied Geophysics
- Vol. 178 (7) , 2475-2498
Open AccessUpdates to the Regional Seismic Travel Time (RSTT) Model: 1. Tomography
A function of global monitoring of nuclear explosions is the development of Earth models for predicting seismic travel times for more accurate calculation of event locations. Most monitoring agencies rely on fast, distance-dependent one-dimensional (1D) Earth models to calculate seismic event locations quickly and in near real-time. RSTT (Regional Seismic Travel Time) is a seismic velocity model and computer software package that captures the major effects of three-dimensional crust and upper mantle structure on regional seismic travel times, while still allowing for fast prediction speed (milliseconds). We describe updates to the RSTT model using a refined data set of regional phases (i.e., Pn, Pg, Sn, Lg) using theBayeslocrelative relocation algorithm. The tomographic inversion shown here acts to refine the previous RSTT public model (rstt201404um) and displays significant features related to areas of global tectonic complexity as well as further reduction in arrival residual values. Validation of the updated RSTT model demonstrates significant reduction in median epicenter mislocation (15.3 km) using all regional phases compared to theiasp911D model (22.1 km) as well as to the current station correction approach used at the Comprehensive Nuclear-Test-Ban Treaty Organization International Data Centre (18.9 km).