MJMin Jing

Min Jing

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Min Jing has a total of 12 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Synthesis and Analysis of Multiple-Output DC-DC Converters

    by Hao Zhang, Han Ren, Dachu Dong, Min Jing

    Multi-output DC-DC converters have simulated widespread interest considering some advantages such as plain circuit configuration, low cost and high conversion efficiency, which are incomparable with conventional multi-output technology. The purpose of this paper is to study the topology derivation approach of non-isolated multi-output DC-DC converters. Firstly, two types of basic output cells named voltage-type output cell (VOC) and current-type output cell (COC) are extracted from six basic dc-dc converters. According to the circuit principle and the duality principle, the topology structures of parallel-type VOC, series-type VOC, parallel-type COC and series-type COC are proposed. Secondly, a systematic derivation approach for multi-output converters is introduced. Furthermore, taking a proposed dual-output SEPIC converter derived from series-type VOC as an example, the operating principle, static and DCM characteristics of the proposed converter is studied. Finally, experiments have been carried out, which demonstrate the validity of the proposed topology derivation approach.


  • Design‐oriented analysis of cross‐regulation in single‐inductor dual‐output Buck‐boost DC‐DC converters

    by Hao Zhang, Min Jing, Wei Liu, Fang Liu

    In single‐inductor multiple‐output converters, the multiplexing of the inductor at each output port will inevitably lead to severe cross‐regulation effect. This paper aims to investigate the steady state performance and transient state cross‐regulation in the single‐inductor multiple‐output DC‐DC converters. A ripple‐based averaged model is proposed to describe the inherent cross‐regulation characteristics of single‐inductor dual‐output (SIDO) Buck‐Boost DC‐DC converter by considering the three piecewise ripple of the inductor current. Then, the steady state performance analysis is carried out to show the cross‐coupling effect on the power distribution relationship and voltage gains of the two output ports. Furthermore, the nonlinear modal series representation is derived to describe the transient behavior of SIDO converter under different load disturbances. More significantly, based on the nonlinear modal analysis, the cross‐regulation factors are proposed to evaluate the influence of some key circuit parameters on the transient state cross‐regulation. It is found that increasing kp2 may improve the transient cross‐regulation performance of the output voltages, but non‐ideal factor VF has little influence on the transient cross‐regulation. This provides much design‐oriented information to suppress the cross‐regulation and optimize the transient performance of the SIDO converter. Finally, the effectiveness of the above analysis is verified by the experimental results. This paper proposes one design‐oriented analysis method to investigate the cross‐regulation in the SIDO DC‐DC converters based on the ripple‐based averaged model. Firstly, the steady state analysis is carried out to show the cross‐coupling effect on the power distribution of the two output ports. Then, according to the nonlinear modal analysis, the cross‐regulation factors are defined to identify the key parameters for the transient cross‐regulation, which provides some design‐oriented information to suppress the cross‐regulation.


  • Topology Derivation of Multiple-Port DC–DC Converters Based on Voltage-Type Ports

    by Hao Zhang, Dachu Dong, Min Jing, Wei Liu, Feng Zheng

    Multiple-port dc–dc converters are characterized by a variety of kinds and a large number of circuit topologies. In this article, we aim to reveal the intrinsic relationship among the topologies of multiple-port dc–dc converters and propose the topology derivation method. First, the voltage- and current-type ports are summarized from basic dc–dc converters, and the approach of converting current-type ports into voltage-type ports is discussed. Then, according to Kirchhoff's law, four types of multiple-input multiple-output converters named input-port-series output-port-series, input-port-series output-port-parallel, input-port-parallel output-port-series, and input-port-parallel output-port-parallel are presented. Second, the topology derivation method of multiple-port bidirectional dc–dc converters based on the voltage-type ports is studied in terms of power flow paths in various operation modes, and then the topology optimization method is proposed. Particularly, a flow diagram for the optimal design procedure is given to guide the topology derivation for some specific requirements. Based on the proposed approach, a family of multiple-port dc–dc converters can be derived, which provides lots of viable candidates for practical engineering. Furthermore, one derived converter named the parallel-type three-port bidirectional buck converter is analyzed in three operation modes to demonstrate the topology derivation. Finally, the effectiveness of the above theoretical analysis is verified by those experimental results.


  • Effect of Modal Interaction on Transient Behavior in Double-Input SEPIC DC–DC Converters

    by Hao Zhang, Min Jing, Shuai Dong, Wei Liu, Zhaohua Cui

    In this paper, we exploit an idea of nonlinear modal series method to investigate the effects of modal interaction in the one-cycle controlled (OCC) double-input SEPIC DC–DC converter. Based on the proposed nonlinear averaged model, the analytical approximate solutions are obtained to characterize the dynamic response characteristic of the transient behaviors in the double-input SEPIC converters. The fundamental modal analysis is utilized to identify the dominant oscillation modes and discover the relationship between parameters, fundamental modes and state variables. Furthermore, the second-order interaction indices are proposed to uncover the underlying mechanism of nonlinear interaction behaviors. In particular, the correlation between parameters and modal interaction are derived to optimize the transient process of the double-input SEPIC converters. Finally, numerical simulations are performed to verify the theoretical analysis.


  • Multiple-Harmonic Modeling and Analysis of Single-Inductor Dual-Output Buck DC–DC Converters

    by Hao Zhang, Min Jing, Wei Liu, Dachu Dong

    Compared with single-input single-output (SISO) dc–dc converters, salient characteristics, such as variable topology sequences and stronger nonlinearity of single-inductor multiple-output (SIMO) dc–dc converters become the major challenges for the modeling and analysis. In this article, a multiple-harmonic model of single-inductor dual-output (SIDO) Buck dc–dc converters is proposed to investigate the multiple-harmonic oscillation phenomenon and analyze the harmonics in different frequency regions. Based on the proposed model, multiple-harmonic oscillation behaviors with the variations of load resistances are revealed, and these harmonics, including low- and high-frequency harmonics, are assessed. Particularly, according to the principle of parity decomposition, the odd and even component distribution of each harmonic is obtained, and a harmonic interaction index is defined to estimate the degree of asymmetric waveform distortion in two adjacent half-waves. Furthermore, eigenvalue analysis is employed to reveal the occurrence mechanism of harmonic oscillation behavior. In addition, the harmonic behavior boundaries of the system in circuit parameter spaces are given to guide the optimal design of the system. Finally, the effectiveness of the above analysis is verified by experimental results.


  • Stability and Evolutionary Trend of Hopf Bifurcations in Double-Input SEPIC DC–DC Converters

    by Hao Zhang, Min Jing, Shuai Dong, Dachu Dong, Ye Liu, Yongpeng Meng

    In this paper, the stability and evolutionary trend of Hopf bifurcations are investigated thoroughly for the double-input SEPIC DC–DC converter with one-cycle control (OCC), which is widely used in hybrid power systems. By means of cycle-by-cycle simulations, the evolutionary trend of bifurcation behaviors is identified. The inherent mechanisms of two types of bidirectional Hopf bifurcations are uncovered based on the proposed averaged model. Moreover, stability boundaries in the parameter space are derived with the help of eigenvalue analysis to optimize the circuit design. Furthermore, some important indices with respect to coupling effects are evaluated to assess the coupling effects in the system. Finally, PSpice circuit experiments are performed to verify the bifurcation analysis.