Jose Manuel Castro
Jose Manuel Castro has a total of 38 co-authors. Here are the top co-authors by number of shared publications:
Brett Lane
Fiber Research Labs, Jack Caveney Innovation Center, Panduit Corp., Tinley Park, Illinois Tinley Park, IL
2 shared publications- Bulent Kose
Department of Ophthalmology, Aritmi Osmangazi Hospital
2 shared publications - Dan Zhang
Department of Integrated Systems Engineering The Ohio State University Columbus Ohio USA
2 shared publications - Ly James Lee
Department of Chemical and Biomolecular Engineering, The Ohio State University, Columbus, OH, 43210, USA
2 shared publications - Maria Guadalupe Villarreal-Marroquin
Modeling Optimization and Computing Technology SAS de CV
2 shared publications - Mauricio Cabrera-Ríos
Graduate Program in Bioengineering, University of Puerto Rico at Mayagüez, Mayagüez, USA
2 shared publications
Latest Publications
- 1 January 2023
- Published by Optica Publishing Group
- p. W2A.1
An Apparatus for Fast Inspecting and Cleaning Connector
In this paper, we present a novel apparatus that can inspect and clean the end face of the fiber-optic connector without the need to switch the connector from one tool to another.
- 1 January 2023
- Published by Optica Publishing Group
- p. W2A.1
An Apparatus for Fast Inspecting and Cleaning Connector
In this paper, we present a novel apparatus that can inspect and clean the end face of the fiber-optic connector without the need to switch the connector from one tool to another.
- 31 December 2020
- Published by Wiley in Polymer Engineering & Science
- Vol. 61 (4) , 1041-1049
A novel carbon nanotube nanopaper polyurethane coating for fiber reinforced composite substrates
High performance carbon nanotube (CNT) nanopaper (NP) reinforced polyurethane (PU) nanocomposite coating with high potential for aerospace and automotive applications was successfully fabricated and evaluated in this work. Different PU formulations were used to fabricate nanocomposites to study the effect of hard segment content on resin infiltration and nanocomposite mechanical properties. The process window of PU infiltration into the CNT NP was established by rheology measurements and thermal gravimetric analysis (TGA). The micro‐structure morphology of the nanocomposite was characterized by scanning electron microscope (SEM). Uniform CNT distribution in PU matrix was observed in the high‐resolution SEM images, which indicated good resin impregnation quality. Based on mechanical properties and process window, a PU formulation was selected as matrix to fabricate NP/PU nanocomposite coating for carbon fiber/epoxy composites (CFPC) substrate. The flexural strength and impact resistance of the CFPC were significantly improved by 9% and 14.7% after applying the NP/PU nanocomposite coating. Aimed at industrial applications, a continuous nanopaper fabrication process was successfully demonstrated in this work. Through the process window study, a continuous process to fabricate nanocomposite is proposed for future scale‐up.
- 31 December 2020
- Published by Wiley in Polymer Engineering & Science
- Vol. 61 (4) , 1041-1049
A novel carbon nanotube nanopaper polyurethane coating for fiber reinforced composite substrates
High performance carbon nanotube (CNT) nanopaper (NP) reinforced polyurethane (PU) nanocomposite coating with high potential for aerospace and automotive applications was successfully fabricated and evaluated in this work. Different PU formulations were used to fabricate nanocomposites to study the effect of hard segment content on resin infiltration and nanocomposite mechanical properties. The process window of PU infiltration into the CNT NP was established by rheology measurements and thermal gravimetric analysis (TGA). The micro‐structure morphology of the nanocomposite was characterized by scanning electron microscope (SEM). Uniform CNT distribution in PU matrix was observed in the high‐resolution SEM images, which indicated good resin impregnation quality. Based on mechanical properties and process window, a PU formulation was selected as matrix to fabricate NP/PU nanocomposite coating for carbon fiber/epoxy composites (CFPC) substrate. The flexural strength and impact resistance of the CFPC were significantly improved by 9% and 14.7% after applying the NP/PU nanocomposite coating. Aimed at industrial applications, a continuous nanopaper fabrication process was successfully demonstrated in this work. Through the process window study, a continuous process to fabricate nanocomposite is proposed for future scale‐up.
- 23 December 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 39 (7) , 2067-2076
Modal-Chromatic Dispersion Interaction Effects for 850 nm VCSEL Channels at 100 Gb/s per Wavelength
We present a theoretical model and experiments to estimate and measure the magnitude of modal and chromatic dispersion interaction (MCDI) over multimode optical channels using vertical-cavity surface-emitting laser (VCSEL) based transceivers. The effects of MCDI and bit error rate performance are also evaluated for PAM-4 signals at data rates from 100 Gbps to 112 Gbps. A section of the paper is dedicated to the characterization of the spectral coupling between VCSEL and fiber, including a multimode and a VCSEL with a dominant fundamental mode that has shown the potential to increase the reach of MMF channels. For the experiments, several types of OM4 and OM3 fibers, with accurate bandwidth characterization over a broad range of wavelengths were utilized. The reported analysis applies to future Ethernet and Fibre Channel applications requiring ≥100 Gb/s per wavelength over multimode fibers.
- 23 December 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 39 (7) , 2067-2076
Modal-Chromatic Dispersion Interaction Effects for 850 nm VCSEL Channels at 100 Gb/s per Wavelength
We present a theoretical model and experiments to estimate and measure the magnitude of modal and chromatic dispersion interaction (MCDI) over multimode optical channels using vertical-cavity surface-emitting laser (VCSEL) based transceivers. The effects of MCDI and bit error rate performance are also evaluated for PAM-4 signals at data rates from 100 Gbps to 112 Gbps. A section of the paper is dedicated to the characterization of the spectral coupling between VCSEL and fiber, including a multimode and a VCSEL with a dominant fundamental mode that has shown the potential to increase the reach of MMF channels. For the experiments, several types of OM4 and OM3 fibers, with accurate bandwidth characterization over a broad range of wavelengths were utilized. The reported analysis applies to future Ethernet and Fibre Channel applications requiring ≥100 Gb/s per wavelength over multimode fibers.
- 1 January 2019
- Published by Springer Nature
- p. 349-377
Microinjection Molding
- 4 August 2016
- Published by Wiley in Polymer Engineering & Science
- Vol. 57 (3) , 248-257
Multiobjective optimization of injection molding using a calibrated predictor based on physical and simulated data
This paper presents a method for improving injection molding processes having competing performance measures using multiobjective optimization. The procedure uses calibrated predictors that combine physical and simulated data to estimate the values of the performance measures. After the predictors are built, the values of the selected performance measures are estimated at a grid of process control variables, and a set of predicted Pareto solutions is identified using nondominance criteria. A refinement of the original Pareto solutions is obtained by predicting the performance measures at a finer grid of the process variables near the original Pareto set. Finally, as validation, a subset of these solutions is evaluated on the physical process. A case study with three performance measures is presented to show how the calibrated predictors allow the injection molding manufacturer to identify the processing conditions that optimize a process having competing objectives. POLYM. ENG. SCI., 57:248–257, 2017. © 2016 Society of Plastics Engineers
- 4 August 2016
- Published by Wiley in Polymer Engineering & Science
- Vol. 57 (3) , 248-257
Multiobjective optimization of injection molding using a calibrated predictor based on physical and simulated data
This paper presents a method for improving injection molding processes having competing performance measures using multiobjective optimization. The procedure uses calibrated predictors that combine physical and simulated data to estimate the values of the performance measures. After the predictors are built, the values of the selected performance measures are estimated at a grid of process control variables, and a set of predicted Pareto solutions is identified using nondominance criteria. A refinement of the original Pareto solutions is obtained by predicting the performance measures at a finer grid of the process variables near the original Pareto set. Finally, as validation, a subset of these solutions is evaluated on the physical process. A case study with three performance measures is presented to show how the calibrated predictors allow the injection molding manufacturer to identify the processing conditions that optimize a process having competing objectives. POLYM. ENG. SCI., 57:248–257, 2017. © 2016 Society of Plastics Engineers
- 1 June 2016
- Published by American Scientific Publishers in Journal of Nanoscience and Nanotechnology
- Vol. 16 (6) , 5620-5626
Carbon Nanofibers (CNFs) Surface Modification to Fabricate Carbon Nanofibers_Nanopaper Integrated Polymer Composite Material
Carbon Nanofibers (CNFs) have shown great potential to improve the physical and mechanical properties of conventional Fiber Reinforced Polymer Composites (FRPCs) surface. Excellent dispersion CNFs into water or polymer matrix was very crucial to get good quality CNFs enhanced FRPCs. Because of the hydrophobic properties of CNFs, we apply the reversible switching principles to transfer the hydrophobic surface into hydrophilic surface by growing polyaniline nanograss on the surface of CNFs which was carried out in hydrochloric acid condition. Incorporating CNFs into FRPCs as a surface layer named CNFs Nanopaper to increase the erosion resistance and electrical conductivity in this research which was very important in the wind energy field. In order to get high quality dispersed CNFs suspension, a sonication unit was used to detangle and uniform disperse the functionalized CNFs. A filter with vacuum pressure used to filter the suspension of CNFs onto Carbon veil to make CNFs Nanopaper. Vacuum Aided Resin Transfer Modeling (VARTM) process was used to fabricate Nano-enhanced FRPCs samples. In order to characterize the mechanical properties, three point bending experiment was measured. The flexural strength capacity and deformation resistance and behavior were compared and analyzed. In this paper, we discussed the methods used and provided experimental parameter and experimental results.
- 1 June 2016
- Published by American Scientific Publishers in Journal of Nanoscience and Nanotechnology
- Vol. 16 (6) , 5620-5626
Carbon Nanofibers (CNFs) Surface Modification to Fabricate Carbon Nanofibers_Nanopaper Integrated Polymer Composite Material
Carbon Nanofibers (CNFs) have shown great potential to improve the physical and mechanical properties of conventional Fiber Reinforced Polymer Composites (FRPCs) surface. Excellent dispersion CNFs into water or polymer matrix was very crucial to get good quality CNFs enhanced FRPCs. Because of the hydrophobic properties of CNFs, we apply the reversible switching principles to transfer the hydrophobic surface into hydrophilic surface by growing polyaniline nanograss on the surface of CNFs which was carried out in hydrochloric acid condition. Incorporating CNFs into FRPCs as a surface layer named CNFs Nanopaper to increase the erosion resistance and electrical conductivity in this research which was very important in the wind energy field. In order to get high quality dispersed CNFs suspension, a sonication unit was used to detangle and uniform disperse the functionalized CNFs. A filter with vacuum pressure used to filter the suspension of CNFs onto Carbon veil to make CNFs Nanopaper. Vacuum Aided Resin Transfer Modeling (VARTM) process was used to fabricate Nano-enhanced FRPCs samples. In order to characterize the mechanical properties, three point bending experiment was measured. The flexural strength capacity and deformation resistance and behavior were compared and analyzed. In this paper, we discussed the methods used and provided experimental parameter and experimental results.
- 14 April 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 34 (16) , 3825-3836
Investigation of 60 Gb/s 4-PAM Using an 850 nm VCSEL and Multimode Fiber
We investigate 4-pulse-amplitude modulation (PAM) at data rates in the range of 50-60 Gb/s using a directly modulated 850 nm VCSEL and multimode fiber links up to 200 m. The channel conditions in which 4-PAM has performance advantages over traditional on-off keying are evaluated followed by experimental results at data rates of 56.7 Gb/s over distances up to 200 m using equalization and FEC, with a post-FEC bit error rate of 10 -12 . The reported analysis is applicable to future Ethernet and Fibre Channel applications requiring 50 Gb/s serial data rates per lane over multimode fibers.
- 14 April 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 34 (16) , 3825-3836
Investigation of 60 Gb/s 4-PAM Using an 850 nm VCSEL and Multimode Fiber
We investigate 4-pulse-amplitude modulation (PAM) at data rates in the range of 50-60 Gb/s using a directly modulated 850 nm VCSEL and multimode fiber links up to 200 m. The channel conditions in which 4-PAM has performance advantages over traditional on-off keying are evaluated followed by experimental results at data rates of 56.7 Gb/s over distances up to 200 m using equalization and FEC, with a post-FEC bit error rate of 10 -12 . The reported analysis is applicable to future Ethernet and Fibre Channel applications requiring 50 Gb/s serial data rates per lane over multimode fibers.
- Open Access
- 1 December 2011
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 08917736,p. 2390-2402
A multicriteria simulation optimization method for injection molding
Injection Molding is one of the most important processes for mass-producing plastic products. To help improve and facilitate the molding of plastic parts, advanced computer simulation tools have been developed. While modeling is complicated by itself, the difficulty of optimizing the injection molding process is that its performance measures usually show conflicting behaviors. Therefore, the best solution for one performance measure is usually not the best for other performance measures. This paper introduces a simulation optimization method that considers multiple performance measures and is able to find a set of efficient solutions without having to evaluate a large number of simulations. The main components of the method are metamodeling and design of experiments. The method is illustrated and detailed here using a simple test example. Furthermore, it is applied to a real injection molding case. The performance of the method using different design of experiments is also discussed.
- 1 December 2011
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 08917736,p. 2390-2402
Open AccessA multicriteria simulation optimization method for injection molding
Injection Molding is one of the most important processes for mass-producing plastic products. To help improve and facilitate the molding of plastic parts, advanced computer simulation tools have been developed. While modeling is complicated by itself, the difficulty of optimizing the injection molding process is that its performance measures usually show conflicting behaviors. Therefore, the best solution for one performance measure is usually not the best for other performance measures. This paper introduces a simulation optimization method that considers multiple performance measures and is able to find a set of efficient solutions without having to evaluate a large number of simulations. The main components of the method are metamodeling and design of experiments. The method is illustrated and detailed here using a simple test example. Furthermore, it is applied to a real injection molding case. The performance of the method using different design of experiments is also discussed.
- 1 January 2006
- Published by Optica Publishing Group
- p. JWD77
Modeling Parallel Anti-Symmetric Waveguide Bragg Gratings using modified Rouard’s method
Optical devices based on the anti-symmetric grating were already demonstrated for WDM and OCDMA. We present a simple modeling tool for the design of these gratings. Novel gratings structures and applications are proposed.
- 1 January 2006
- Published by Optica Publishing Group
- p. JWD77
Modeling Parallel Anti-Symmetric Waveguide Bragg Gratings using modified Rouard’s method
Optical devices based on the anti-symmetric grating were already demonstrated for WDM and OCDMA. We present a simple modeling tool for the design of these gratings. Novel gratings structures and applications are proposed.
- 21 April 2004
- Published by IOP Publishing in Modelling and Simulation in Materials Science and Engineering
- Vol. 12 (3) , S121-S149
Modelling and simulation in reactive polymer processing
- 21 April 2004
- Published by IOP Publishing in Modelling and Simulation in Materials Science and Engineering
- Vol. 12 (3) , S121-S149
Modelling and simulation in reactive polymer processing