Lakshmana Rao Jeeru
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Lakshmana Rao Jeeru has a total of 14 co-authors. Here are the top co-authors by number of shared publications:
- B. V. S. Praveen
Department of Chemical Engineering , Chaitanya Bharathi Institute of Technology (CBIT) , Hyderabad 500075 , India
2 shared publications - Narayan C. Pradhan
Department of Chemical Engineering Indian Institute of Technology Kharagpur India
2 shared publications Ramesh Kumar Guduru
Department of Mechanical Engineering, School of Technology, Pandit Deendayal Energy University, Raisan, Gandhinagar, India
2 shared publications- Anup Ashok
Department of Chemical Engineering, B V Raju Institute of Technology, Narsapur, Medak District, India
1 shared publication - D. Venkata Ramakrishna1 shared publication
- Doni Mohana Krishnudu
Department of Mechanical Engineering, G Pulla Reddy Engineering College, Kurnool, India
1 shared publication
Latest Publications
- Open Access
- 14 March 2025
- Published by Atlantis Press SARL
- p. 812-821
Impact of Alkali Treatment on the Mechanical Properties of Sorghum Fiber Reinforced Epoxy Composites
- 14 March 2025
- Published by Atlantis Press SARL
- p. 812-821
Open AccessImpact of Alkali Treatment on the Mechanical Properties of Sorghum Fiber Reinforced Epoxy Composites
- 1 October 2023
- Published by Springer Nature in Chemical Papers
- Vol. 78 (1) , 321-329
Sustainable synthesis of automobile fuel additive from glycerol and acetone and catalyst reusability studies
- 1 October 2023
- Published by Springer Nature in Chemical Papers
- Vol. 78 (1) , 321-329
Sustainable synthesis of automobile fuel additive from glycerol and acetone and catalyst reusability studies
- Open Access
- 25 April 2023
- Published by IWA Publishing in AQUA — Water Infrastructure, Ecosystems and Society
- Vol. 72 (5) , 623-632
Role of cationic surfactants in palladium adsorption of commercial ion exchange resins using electroless plating solutions
This work investigates the role of cationic surfactants in the adsorption of palladium ions from synthetic electroless plating solutions using a commercial resin, Lewatit TP-214. This would also help us in determining the batch adsorption experiments elaborated on the optimal parameters such as surfactant concentration, pH, dosage, initial metal ion concentration for the development of an ion-exchange resin with high metal removal efficiency. Critical micelle concentration (CMC) appears to be an important parameter in determining the adsorption behavior of ion-exchange resins with palladium ions. Equilibrium models were measured for their fitness with the obtained Pd (II) batch adsorption characteristics and Freundlich isotherm confirms the heterogeneous Pd (II) adsorption on Lewatit TP-214. FTIR analysis confirmed that the Pd (II) metal uptake of Lewatit TP-214 resin largely depends on amine groups (-NH2+ and -NH+) and the donor atoms attached to cationic surfactant. The optimized choice of adsorption parameters (pH of 8, dosage of 1 g/L, and contact time of 300 min) of Lewatit TP-214 adsorbent provided the highest metal uptake and removal efficiency as 201.7 mg/g and 90.16%, respectively, for the lowest Pd concentration of 300 mg/L.
- 25 April 2023
- Published by IWA Publishing in AQUA — Water Infrastructure, Ecosystems and Society
- Vol. 72 (5) , 623-632
Open AccessRole of cationic surfactants in palladium adsorption of commercial ion exchange resins using electroless plating solutions
This work investigates the role of cationic surfactants in the adsorption of palladium ions from synthetic electroless plating solutions using a commercial resin, Lewatit TP-214. This would also help us in determining the batch adsorption experiments elaborated on the optimal parameters such as surfactant concentration, pH, dosage, initial metal ion concentration for the development of an ion-exchange resin with high metal removal efficiency. Critical micelle concentration (CMC) appears to be an important parameter in determining the adsorption behavior of ion-exchange resins with palladium ions. Equilibrium models were measured for their fitness with the obtained Pd (II) batch adsorption characteristics and Freundlich isotherm confirms the heterogeneous Pd (II) adsorption on Lewatit TP-214. FTIR analysis confirmed that the Pd (II) metal uptake of Lewatit TP-214 resin largely depends on amine groups (-NH2+ and -NH+) and the donor atoms attached to cationic surfactant. The optimized choice of adsorption parameters (pH of 8, dosage of 1 g/L, and contact time of 300 min) of Lewatit TP-214 adsorbent provided the highest metal uptake and removal efficiency as 201.7 mg/g and 90.16%, respectively, for the lowest Pd concentration of 300 mg/L.
- 17 April 2023
- Published by Royal Society of Chemistry (RSC) in Reaction Chemistry & Engineering
- Vol. 8 (7) , 1729-1737
Production of biodiesel: kinetics and reusability studies of the Mg–Al hydrotalcite catalyst using Jatropha oil
This study focuses on the use of the co-precipitation method to prepare Mg–Al layered double hydroxide (LDH) catalysts for the transesterification conversion of Jatropha oil into biodiesel. X-Ray diffraction (XRD), scanning electron microscopy (SEM), and BET methods were used to characterize the crystallinity, morphology, and surface area of the catalyst. The effects of varying reaction conditions, such as time, catalyst loading, reaction temperature, and methanol to oil molar ratio, on biodiesel yield, were investigated. The optimal experimental conditions for achieving a 95 percent yield were identified as a temperature of approximately 70 °C, a catalyst loading of 3 percent by weight, and a molar ratio of methanol to Jatropha oil of 12 to 1. Catalyst regeneration was also studied to determine reusability, and the activation energy was evaluated to be around 26.7 kJ mol−1. The results showed that the catalyst could be reused for up to 5 cycles with a yield reduction of less than ∼10%. The study demonstrates the potential of using inexpensive Mg–Al LDH catalysts for large-scale biodiesel production.
- 17 April 2023
- Published by Royal Society of Chemistry (RSC) in Reaction Chemistry & Engineering
- Vol. 8 (7) , 1729-1737
Production of biodiesel: kinetics and reusability studies of the Mg–Al hydrotalcite catalyst using Jatropha oil
This study focuses on the use of the co-precipitation method to prepare Mg–Al layered double hydroxide (LDH) catalysts for the transesterification conversion of Jatropha oil into biodiesel. X-Ray diffraction (XRD), scanning electron microscopy (SEM), and BET methods were used to characterize the crystallinity, morphology, and surface area of the catalyst. The effects of varying reaction conditions, such as time, catalyst loading, reaction temperature, and methanol to oil molar ratio, on biodiesel yield, were investigated. The optimal experimental conditions for achieving a 95 percent yield were identified as a temperature of approximately 70 °C, a catalyst loading of 3 percent by weight, and a molar ratio of methanol to Jatropha oil of 12 to 1. Catalyst regeneration was also studied to determine reusability, and the activation energy was evaluated to be around 26.7 kJ mol−1. The results showed that the catalyst could be reused for up to 5 cycles with a yield reduction of less than ∼10%. The study demonstrates the potential of using inexpensive Mg–Al LDH catalysts for large-scale biodiesel production.
- Open Access
- 29 April 2020
- Published by American Chemical Society (ACS)
Cracking of heavy oil over a catalyst synthesized from fly ash
- 29 April 2020
- Published by American Chemical Society (ACS)
Open AccessCracking of heavy oil over a catalyst synthesized from fly ash