CZChuntao Zhang

Chuntao Zhang

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Chuntao Zhang has a total of 22 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • AKgram: A Robust Adaptive Framework for Bearing Fault Diagnosis Under Speed-Varying Condition

    by Chuntao Zhang, Sen Hu, Qiuyang Zhou, Yonghao Miao

    Rolling bearing fault diagnosis under speed-varying condition (SVC) presents a significant challenge due to the non-stationary nature of vibration signals. The narrowband filtering demodulation (NFD) methods, while effective under constant speeds, faces severe limitations under such non-stationary operations. Specifically, their traditional feature indicators fail to characterize the non-stationary fault impulses, leading to significant performance degradation. Furthermore, the inherent fixed frequency band segmentation strategy of these methods can also impair their diagnostic accuracy. To address these limitations, this paper proposes AKgram, a novel adaptive diagnostic method designed specifically for the SVC. First, the fluctuation trend spectrum (FTS) is derived from the signal spectrum to realize adaptive frequency band segmentation, constructing a multi-level tower-shaped boundary distribution map while preserving full spectral component integrity and overcoming fixed segmentation limitations. Then, average kurtosis (AK) is introduced as a robust indicator to quantify fault-induced impulses and extract non-stationary fault features under SVC. Finally, AK values of segmented sub-bands are visualized in the tower-shaped map to form the AKgram, with the sub-band of maximum AK identified as the optimal demodulation band for direct fault feature extraction. The effectiveness and superiority of AKgram are validated via simulation and experimental data from a variable-speed bearing test bench, outperforming the classical Kurtogram method in optimal band identification and fault feature extraction.


  • Adaptive Eco-Driving With Guided Speed Planning and Lane Changing Through Signalized Intersections

    by Jianghao Leng, Chao Sun, Haoxuan Dong, Dongjun Li, Chuntao Zhang, Peter C. Y. Chen

    In dynamic traffic flow conditions, lane-changing maneuvers hold significant potential for achieving energy and time efficiency. However, existing research often overlooks the influence of a global reference speed trajectory, especially in urban settings with multiple signalized intersections. To address this gap, this study proposes an eco-driving strategy for connected and automated vehicles (CAVs) that integrates deep reinforcement learning (DRL) and model predictive control (MPC), considering the impact of a guided speed profile with good synergy. A three-stage speed planning framework, following a coarse-smooth-optimization manner, is introduced to efficiently generate an energy-saving guided speed profile. After that, the guided speed profile is delivered into DRL, serving as a network input together with information on surrounding human driver vehicles (HDVs). The DRL adopts a soft actor-critic (SAC) algorithm integrating with an MPC controller, which can generate control outputs for both lane-changing and car-following maneuvers based on the DRL decisions and guided speed profile. Additionally, the MPC also certifies decisions for vehicle safety. Simulation results indicate that compared to benchmark methods, the proposed strategy achieves energy savings of up to 23.6% while maintaining high computational efficiency, which is accompanied by a smaller time delay approaching intersections and ensuring vehicle safety.


  • Integrated optimization of kinematic and air-conditioning states for eco-driving and eco-cooling

    by Chuntao Zhang, Changjiu Ning, Heyang Ma, Chao Sun

    The powertrain and air-conditioning (AC) system constitute the primary electricity consumption components in electric vehicles (EVs). Hence, to enhance the energy optimality of an ego vehicle that has to travel across consecutive traffic lights following a preceding vehicle with stochastic driving behavior, as presented in the benchmark challenge of CVCI 2023, a model predictive control (MPC) -based optimization method is proposed to parallel conduct kinematic optimization and AC regulation. Furthermore, a hierarchical framework is adopted in kinematic optimization for speed planning and powertrain control. To incorporate the road terrain information and enhance the feasibility of the formulated optimization problem, speed planning with MPC is formulated in the space domain with an adaptive planning horizon. Validation results exhibit that the proposed method reduces the overall electricity consumption by 12.82% to 24.84% among the five provided traffic scenarios compared with the benchmark method, demonstrating superior energy-saving potential of the proposed method.

  • Coordinated Hierarchical Co-Optimization of Speed Planning and Energy Management for Electric Vehicles Driving in Stochastic Environment

    by Chao Sun, Chuntao Zhang, Xingyu Zhou, Fengchun Sun

    Active co-optimization of future speed profiles together with powertrain control is the optimal solution to further exploiting the energy benefit of electric vehicles (EVs) in real-world operation. However, with uncertainties in driving conditions and concerns about driving safety, speed planning results are cautious and with frequent speed variations, which deteriorates the energy economy of EVs in turn. To comprehensively optimize the energy economy and driving safety of EVs in a stochastic driving environment, this paper develops a chance constraint model predictive control (CC-MPC) for co-optimizing the speed planning and powertrain control, which forms an advanced energy management method. To handle the instantaneous disturbance, a coordinated hierarchical method (CHM) is engineered for solving the CC-MPC. As suggested by simulation, the driving safety (measured by success rate) can be increased to 81% with the CC-MPC, which realizes a 62% improvement compared with situations without CC-MPC. Moreover, the proposed CC-MPC significantly mitigates the conflict between driving safety and the energy economy, and the worst deterioration of the energy economy is only 9.3%. Sacrificing merely 2.1% sub-optimality, CHM removes 86% computation loads, and the median of CPU time is merely 0.58s at each computation step (control interval 1s), which makes the CC-MPC promising for online implementation.


  • An Eco-Driving Approach With Flow Uncertainty Tolerance for Connected Vehicles Against Waiting Queue Dynamics on Arterial Roads

    by Chao Sun, Chuntao Zhang, Haiyang Yu, Weiqiang Liang, Qiang Ren, Jianwei Li

    Eco-driving incorporating multiple signalized intersections simultaneously has been proven to substantially benefit connected vehicles (CVs) in energy performance. However, ignoring the dynamic variation of waiting queues before downstream intersections may prevent CVs from following the obtained speed profile on security grounds. In this article, the dynamic variation of the waiting queue is modeled and predicted based on shockwave theory and data-driven-based traffic flow prediction. To formulate the waiting queues as additional time-varying constraints for optimization problems, an extended traffic signal model is constructed based on the prediction. Furthermore, a hierarchical optimization framework is proposed, under which the hybrid optimization problem is decomposed into a discrete problem and a continuous one. Monte Carlo simulation demonstrates that if the proposed eco-driving approach is implemented, failure to follow the reference speed profile decreases by 79.4%. Also, the fuel consumption can be saved by over 4% compared with approaches ignoring the waiting queue.


  • An Improved Deadbeat Predictive Current Control Scheme for Open-Winding Permanent Magnet Synchronous Motors Drives With Disturbance Observer

    by Xueping Li, Shuo Zhang, Chengning Zhang, Ying Zhou, Chuntao Zhang

    To improve the performance of open-winding permanent magnet synchronous motors (OW-PMSMs) with a common DC bus, a novel control method that can simultaneously eliminate parameter mismatch in the d-axis, q-axis, and zero-sequence loop (ZSL) is proposed. First, the parameter mismatches are analyzed. Second, an extended state observer (ESO), which can predict the current in the next instant and the disturbance caused by parameter mismatch, is established. By combining the ESO and the deadbeat predictive current control (DPCC) in the d-axis and q-axis, replacing the sampled current in the DPCC with the predictive current in the ESO, and considering predictive disturbance as a voltage reference feedforward compensation, one-step delay and the disturbance caused by parameter mismatch are addressed. Then in the ZSL, the predicted zero-sequence disturbance is considered as a compensation for the reference zero-sequence voltage (ZSV). The ZSV is obtained using the zero-voltage vector redistribution strategy in alternate sub-hexagonal center PWM modulation strategy. The proposed method enhances the robustness of OW-PMSM, against parameter mismatch in the d-axis, q-axis, or ZSL. To verify the effectiveness of the proposed method, simulation and experimental results obtained using the traditional DPCC method and the ESO+DPCC method are presented herein.