Oleksandr Hrytsaka
Research Subjects
Research Interests
Oleksandr Hrytsaka has a total of 4 co-authors. Here are the top co-authors by number of shared publications:
- Alvian Kuzmych
Institute of Mechanics and Automation of Agro-Industrial Production of the National Academy of Agrarian Sciences of Ukraine
4 shared publications - Mykhailo Aneliak
Institute of Mechanics and Automatics of Agroindustrial Production of the National academy of Agrarian Sciences of Ukraine
4 shared publications National Scientific Centre “Institute of Agricultural Engineering and Electrification”
1 shared publication- O. O. Konoval
INSTITUTE of MECHANICS and AUTOMATION of AGRO-INDUSTRIAL PRODUCTION of the NATIONAL ACADEMY of AGRARIAN SCIENCES of UKRAIN
1 shared publication
Latest Publications
- 1 January 2021
- Published by National Scientific Center - Institute of Agricultural Engineering and Electrification in Mehanization and electrification of agricultural
- No. 13(112),p. 81-88
Research on energy efficiency of the process of harvesting by-products of corn and sunflower
Annotation Purpose. Systematize energy costs in the implementation of technological processes for harvesting by-products of corn and sunflower for energy purposes. Methods. Processing of analytical and experimental data based on the basic provisions of mathematical statistics, simulation using a computer and software mathematical environments MathCad, Statistics, Microsoft Office. Results. The calculations of energy efficiency indicators of the use of corn and sunflower for energy purposes are given. The dependences of the energy efficiency of the technological process of harvesting the crushed mass of corn and sunflower in pressed form on the yield at different levels of humidity of the non-grain part of the crop are obtained. Conclusions. It is established that the value of energy costs to compensate for the removal of elements by different components of the non-grain part of the crop varies significantly: corn – 0.36–2.15 MJ/kg; sunflower – 0.7–1.63 MJ/kg. The coefficient of energy efficiency of the developed process of harvesting corn for energy purposes, taking into account the removal of nutrients is 10.5–11.5, sunflower – 8.7–9.0, with a humidity of 20%. Keywords: non-grain part of corn and sunflower harvest, harvesting of non-grain part, energy efficiency.
- 1 January 2021
- Published by National Scientific Center - Institute of Agricultural Engineering and Electrification in Mehanization and electrification of agricultural
- No. 13(112),p. 81-88
Research on energy efficiency of the process of harvesting by-products of corn and sunflower
Annotation Purpose. Systematize energy costs in the implementation of technological processes for harvesting by-products of corn and sunflower for energy purposes. Methods. Processing of analytical and experimental data based on the basic provisions of mathematical statistics, simulation using a computer and software mathematical environments MathCad, Statistics, Microsoft Office. Results. The calculations of energy efficiency indicators of the use of corn and sunflower for energy purposes are given. The dependences of the energy efficiency of the technological process of harvesting the crushed mass of corn and sunflower in pressed form on the yield at different levels of humidity of the non-grain part of the crop are obtained. Conclusions. It is established that the value of energy costs to compensate for the removal of elements by different components of the non-grain part of the crop varies significantly: corn – 0.36–2.15 MJ/kg; sunflower – 0.7–1.63 MJ/kg. The coefficient of energy efficiency of the developed process of harvesting corn for energy purposes, taking into account the removal of nutrients is 10.5–11.5, sunflower – 8.7–9.0, with a humidity of 20%. Keywords: non-grain part of corn and sunflower harvest, harvesting of non-grain part, energy efficiency.
- 16 September 2020
- Published by National Scientific Center - Institute of Agricultural Engineering and Electrification in Mehanization and electrification of agricultural
- No. 11(110),p. 171-177
Research of technical and operational indicators of the energy technology means created based on a combine harvester chassis
Annotation Purpose. Assess the prospects for the creation of MTU on the basis of the chassis of the combine and identify potential technical and operational capabilities when used in various agricultural works. Methods. Methods of mathematical modeling and analysis of their estimation are applied in researches of technical and operational indicators of work of MTU. Results. The calculation schemes of completing the units with technological modules are considered, which will allow realizing the potential of the layout scheme of the energy technology means as much as possible. The study of technical and operational indicators of MTU with the use as an energy technology means of the chassis of the combine harvester KZS-9-1 “Slavutych”, which was compared with the performance of MTU on the basis of the tractor T-150K. In the course of researches the calculation of technical and operational indicators of work of MTU at disking, peeling of stubble and cultivation of soil is carried out. Conclusions. Analysis of the results of technical and operational indicators of MTU created on the basis of the chassis of a self-propelled combine harvester in comparison with a tractor of class 30 kN showed that the performance of these MTU with the same agricultural machines will not differ significantly. It should be noted that MTU as a part of energy technology means – the agro processor have worse maneuverability, stability of movement and convenience of aggregation. At the same time increase to 30% of fuel consumption in MTU which are completed on the basis of energy technology means – the agro processor is expected. Keywords: combine harvester chassis, energy technology means – agro processor, MTU, technical-operational indicators.
- 16 September 2020
- Published by National Scientific Center - Institute of Agricultural Engineering and Electrification in Mehanization and electrification of agricultural
- No. 11(110),p. 171-177
Research of technical and operational indicators of the energy technology means created based on a combine harvester chassis
Annotation Purpose. Assess the prospects for the creation of MTU on the basis of the chassis of the combine and identify potential technical and operational capabilities when used in various agricultural works. Methods. Methods of mathematical modeling and analysis of their estimation are applied in researches of technical and operational indicators of work of MTU. Results. The calculation schemes of completing the units with technological modules are considered, which will allow realizing the potential of the layout scheme of the energy technology means as much as possible. The study of technical and operational indicators of MTU with the use as an energy technology means of the chassis of the combine harvester KZS-9-1 “Slavutych”, which was compared with the performance of MTU on the basis of the tractor T-150K. In the course of researches the calculation of technical and operational indicators of work of MTU at disking, peeling of stubble and cultivation of soil is carried out. Conclusions. Analysis of the results of technical and operational indicators of MTU created on the basis of the chassis of a self-propelled combine harvester in comparison with a tractor of class 30 kN showed that the performance of these MTU with the same agricultural machines will not differ significantly. It should be noted that MTU as a part of energy technology means – the agro processor have worse maneuverability, stability of movement and convenience of aggregation. At the same time increase to 30% of fuel consumption in MTU which are completed on the basis of energy technology means – the agro processor is expected. Keywords: combine harvester chassis, energy technology means – agro processor, MTU, technical-operational indicators.
- 1 January 2020
- Published by Central Ukrainian National Technical University in National Interagency Scientific and Technical Collection of Works. Design, Production and Exploitation of Agricultural Machines
- No. 50
Collection of Non-grain Part of Sunflower Harvest for Energy Purposes
The aim of the research is to increase the efficiency of harvesting the non-grain part of the sunflower crop for energy purposes by developing technology and substantiation of technical means. The analysis of sunflower harvesting technologies is carried out; the method of harvesting the crushed mass of the non-grain part of the sunflower crop with the formation of windrows of high linear mass at the edge of the field is substantiated. The results of laboratory field research of harvesting, selection and pressing of the crushed mass of the non-grain part of the sunflower crop are presented. Directions of improvement of the baler for harvesting of a non-grain part of sunflower harvest are noted. The constructional-technological scheme of the trailed hopper and windrow-former to the combine harvester for formation of windrows of a non-grain part of a crop of sunflower with the increased running weight is offered. The results of laboratory field studies confirmed the hypothesis of the possibility of selecting the rolls of the crushed mass of the non-grain part of the sunflower crop with a running weight of more than 20 kg per meter at a level of losses not exceeding 20%. The efficiency of harvesting the non-grain part of the sunflower crop for energy purposes can be increased by collecting the crushed mass passed through the combine harvester in a trailed digger and forming rolls with high running weight at the edge of the field for drying and subsequent selection by serial balers. It is established that at the level of yield of sunflower seeds within 3 ton per ha the volume of harvesting by the combine harvester of the crushed weight of non-grain part makes 7.5-8.5 center per ha. When picking with a baler, rolls with a density of 75-90 kg per m3 were formed at an average humidity of 23%.
- 1 January 2020
- Published by Central Ukrainian National Technical University in National Interagency Scientific and Technical Collection of Works. Design, Production and Exploitation of Agricultural Machines
- No. 50
Collection of Non-grain Part of Sunflower Harvest for Energy Purposes
The aim of the research is to increase the efficiency of harvesting the non-grain part of the sunflower crop for energy purposes by developing technology and substantiation of technical means. The analysis of sunflower harvesting technologies is carried out; the method of harvesting the crushed mass of the non-grain part of the sunflower crop with the formation of windrows of high linear mass at the edge of the field is substantiated. The results of laboratory field research of harvesting, selection and pressing of the crushed mass of the non-grain part of the sunflower crop are presented. Directions of improvement of the baler for harvesting of a non-grain part of sunflower harvest are noted. The constructional-technological scheme of the trailed hopper and windrow-former to the combine harvester for formation of windrows of a non-grain part of a crop of sunflower with the increased running weight is offered. The results of laboratory field studies confirmed the hypothesis of the possibility of selecting the rolls of the crushed mass of the non-grain part of the sunflower crop with a running weight of more than 20 kg per meter at a level of losses not exceeding 20%. The efficiency of harvesting the non-grain part of the sunflower crop for energy purposes can be increased by collecting the crushed mass passed through the combine harvester in a trailed digger and forming rolls with high running weight at the edge of the field for drying and subsequent selection by serial balers. It is established that at the level of yield of sunflower seeds within 3 ton per ha the volume of harvesting by the combine harvester of the crushed weight of non-grain part makes 7.5-8.5 center per ha. When picking with a baler, rolls with a density of 75-90 kg per m3 were formed at an average humidity of 23%.
- 1 January 2020
- Published by National Scientific Center - Institute of Agricultural Engineering and Electrification in Mehanization and electrification of agricultural
- No. 12,p. 51-59
Research of the windrow formation process of the non-grain part of the corn and sunflower crop during harvesting for energy purposes
- 1 January 2020
- Published by National Scientific Center - Institute of Agricultural Engineering and Electrification in Mehanization and electrification of agricultural
- No. 12,p. 51-59
Research of the windrow formation process of the non-grain part of the corn and sunflower crop during harvesting for energy purposes