Denis Mykhaylovskyi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Denis Mykhaylovskyi has a total of 5 co-authors. Here are the top co-authors by number of shared publications:
- Mykola Komar
Kyiv National University of Construction and Architecture
2 shared publications - Tetiana Skliarova
Kyiv National University of Construction and Architecture
2 shared publications Денис Михайловський
Київський національний університет будівництва і архітектури
2 shared publications- Ihor Skliarov
Kyiv National University of Construction and Architecture
1 shared publication Mykola Komar
Kyiv National University of Construction and Architecture
1 shared publication
Latest Publications
- Open Access
- 28 June 2024
- Published by Kyiv National University of Construction and Architecture in Building constructions. Theory and Practice
- No. 14,p. 161-169
Features of determining the estimated length of positive arches made of laminated wood
The issue of loss of stability of arched structures is very important in engineering practice and design. This issue is especially key from the point of view of reliability and safety and economic losses, since structures of this type are usually used in buildings with a consequence class of at least CC2. [1].Laminated timber arches are long-span com-pression-bent elements in which the loss of stability plays a major role in determining the cross-sectional dimensions. In contrast to beams, an arch has a much larger ratio between the length of the element and its cross section, which in turn increases the risk of loss of stability. The loss of stability of an arch and its cor-rectly determined design length are directly related. The design length is defined as the value at which an arch can lose its stability under the influence of external loads. The main aspects of this relationship are: the value of the design length of the arch; mechanisms of loss of stabil-ity; dependence on the material and shape; ac-curacy of engineering calculations.It should be noted that recommendations for determining the design length of an arch are contained exclusively in the methodological lit-erature and outdated regulatory documents, such as [7]. In the latest current regulatory doc-ument [8], this issue is resolved by checking the strength and stability of the element, without limiting the flexibility. Since the flexibility of the element depends on its design length, the is-sue of determining this parameter remains open and relies directly on the design engineer, or rather, on his experience and competence. This issue is very relevant, given that a minor error in determining the design length significantly affects the results of testing compressed-bent elements.As a result of the work carried out, we analyzed the determination of the design lengths of hollow arches with different shapes and types of loading using two calculation methods: analytical formulas and the finite element method using the LIRA-SAPR-2019 software. Based on the calculations, recommendations for determining the design lengths of arches are given.
- 28 June 2024
- Published by Kyiv National University of Construction and Architecture in Building constructions. Theory and Practice
- No. 14,p. 161-169
Open AccessFeatures of determining the estimated length of positive arches made of laminated wood
The issue of loss of stability of arched structures is very important in engineering practice and design. This issue is especially key from the point of view of reliability and safety and economic losses, since structures of this type are usually used in buildings with a consequence class of at least CC2. [1].Laminated timber arches are long-span com-pression-bent elements in which the loss of stability plays a major role in determining the cross-sectional dimensions. In contrast to beams, an arch has a much larger ratio between the length of the element and its cross section, which in turn increases the risk of loss of stability. The loss of stability of an arch and its cor-rectly determined design length are directly related. The design length is defined as the value at which an arch can lose its stability under the influence of external loads. The main aspects of this relationship are: the value of the design length of the arch; mechanisms of loss of stabil-ity; dependence on the material and shape; ac-curacy of engineering calculations.It should be noted that recommendations for determining the design length of an arch are contained exclusively in the methodological lit-erature and outdated regulatory documents, such as [7]. In the latest current regulatory doc-ument [8], this issue is resolved by checking the strength and stability of the element, without limiting the flexibility. Since the flexibility of the element depends on its design length, the is-sue of determining this parameter remains open and relies directly on the design engineer, or rather, on his experience and competence. This issue is very relevant, given that a minor error in determining the design length significantly affects the results of testing compressed-bent elements.As a result of the work carried out, we analyzed the determination of the design lengths of hollow arches with different shapes and types of loading using two calculation methods: analytical formulas and the finite element method using the LIRA-SAPR-2019 software. Based on the calculations, recommendations for determining the design lengths of arches are given.
- Open Access
- 26 June 2023
- Published by Kyiv National University of Construction and Architecture in Strength of Materials and Theory of Structures
- No. 110,p. 164-177
Modeling and calculation of panel buildings made of cross-laminated timber
Buildings made using cross-laminated timber have become widespread over the last decade. The experience of designing and operating such buildings of various functional purposes confirms the expediency of their construction and use. This article provides a solution to the problem of modeling and calculating panel houses made of cross-laminated timber using the finite element method using the given mechanical characteristics of the material. The possibility of modeling and calculating panel buildings made of cross-laminated timber using the finite element method with the use of flat finite elements, taking into account the orthotropic properties of the material, under the condition of using the reduced modulus of elasticity according to the previously proposed method and adjusting Poisson's coefficients, in such a way as to maintain the condition of existence of elastic potential. The algorithm for modeling panel buildings made of cross-laminated timber using the finite element method as a system "soil base-foundation-above-ground structure system" is given.
- 26 June 2023
- Published by Kyiv National University of Construction and Architecture in Strength of Materials and Theory of Structures
- No. 110,p. 164-177
Open AccessModeling and calculation of panel buildings made of cross-laminated timber
Buildings made using cross-laminated timber have become widespread over the last decade. The experience of designing and operating such buildings of various functional purposes confirms the expediency of their construction and use. This article provides a solution to the problem of modeling and calculating panel houses made of cross-laminated timber using the finite element method using the given mechanical characteristics of the material. The possibility of modeling and calculating panel buildings made of cross-laminated timber using the finite element method with the use of flat finite elements, taking into account the orthotropic properties of the material, under the condition of using the reduced modulus of elasticity according to the previously proposed method and adjusting Poisson's coefficients, in such a way as to maintain the condition of existence of elastic potential. The algorithm for modeling panel buildings made of cross-laminated timber using the finite element method as a system "soil base-foundation-above-ground structure system" is given.
- Open Access
- 29 June 2022
- Published by Kyiv National University of Construction and Architecture in Building constructions. Theory and Practice
- No. 10,p. 4-10
ANALYSIS OF RESEARCH APPLICATIONS OF COMPOSITE TAPE FOR REINFORCEMENT OF WOODEN STRUCTURES
In the XXI century, the construction industry is developing at a rapid pace. Competitors of the same material, but reduced in cross-section by strengthening them with composite materials, compete with large-sized structures. Composite materials are considered to have relatively new operational and physical-mechanical properties, which are created due to the joint work of two or more components that differ in structure, chemical composition, physical and mechanical characteristics. One of the first composite materials is considered to be reinforced concrete, which was widely used in the late XIX century. At the beginning of the XX century for the needs of shipbuilding, aviation, aerospace, etc., modern composite materials such as fiberglass, consisting of artificial continuous glass fibers and artificial polymer matrix invented by A.K. Burov and his colleagues in the 30s of last century [1]. During the Great Patriotic War, fiberglass plates were used instead of aluminum in aircraft construction. In the 1960s, carbon fiber was developed in the United Kingdom and boron in the United States, which gave impetus to the development of a new generation of composite materials with high modulus of elasticity and high strength, which significantly increased their scope. . It can be noted that most composite materials are well resistant to many chemical influences: alkalis, acids, chlorides, sulfates, nitrates and others. All of them are not dangerous to human health in normal operation with the use of personal protective equipment in the direct performance of reinforcement work. This allows them to be used both in industrial and agricultural construction where there is a direct impact of the external environment on the structure reinforced with composite materials, and in residential buildings without harm to residents. After analyzing the creation and use of composite materials to strengthen structures of different materials, as well as methods of their application and physical and mechanical properties, it is assumed that such materials can be perfectly combined with solid and glued wood structures, increasing load-bearing capacity while reducing their cross section.
- 29 June 2022
- Published by Kyiv National University of Construction and Architecture in Building constructions. Theory and Practice
- No. 10,p. 4-10
Open AccessANALYSIS OF RESEARCH APPLICATIONS OF COMPOSITE TAPE FOR REINFORCEMENT OF WOODEN STRUCTURES
In the XXI century, the construction industry is developing at a rapid pace. Competitors of the same material, but reduced in cross-section by strengthening them with composite materials, compete with large-sized structures. Composite materials are considered to have relatively new operational and physical-mechanical properties, which are created due to the joint work of two or more components that differ in structure, chemical composition, physical and mechanical characteristics. One of the first composite materials is considered to be reinforced concrete, which was widely used in the late XIX century. At the beginning of the XX century for the needs of shipbuilding, aviation, aerospace, etc., modern composite materials such as fiberglass, consisting of artificial continuous glass fibers and artificial polymer matrix invented by A.K. Burov and his colleagues in the 30s of last century [1]. During the Great Patriotic War, fiberglass plates were used instead of aluminum in aircraft construction. In the 1960s, carbon fiber was developed in the United Kingdom and boron in the United States, which gave impetus to the development of a new generation of composite materials with high modulus of elasticity and high strength, which significantly increased their scope. . It can be noted that most composite materials are well resistant to many chemical influences: alkalis, acids, chlorides, sulfates, nitrates and others. All of them are not dangerous to human health in normal operation with the use of personal protective equipment in the direct performance of reinforcement work. This allows them to be used both in industrial and agricultural construction where there is a direct impact of the external environment on the structure reinforced with composite materials, and in residential buildings without harm to residents. After analyzing the creation and use of composite materials to strengthen structures of different materials, as well as methods of their application and physical and mechanical properties, it is assumed that such materials can be perfectly combined with solid and glued wood structures, increasing load-bearing capacity while reducing their cross section.
- Open Access
- 28 December 2021
- Published by Kyiv National University of Construction and Architecture in Building constructions. Theory and Practice
- No. 9,p. 72-80
REINFORCEMENT OF COMPOSITE WOODEN STRUCTURES MATERIALS, CONDITION AND PROSPECTS
Today, there is a growing need in the construction industry for the introduction of ecological urban space and the use of materials from renewable natural resources, one of such building materials from ancient times was wood.Temples, castles, houses, bridges and other structures have been erected all over the world sinceancient times with the help of wooden structures.A large number of buildings and structures made of wood have been operating successfully for 300-400 years and are vivid examples of the durability of these structures. Nowadays, wooden construction is developing rapidly with the development of new technologies. After all, new woodworking technologies allow obtaining a spliced array ofwood, which solves many different issues of wood as a structural material. Recently, the constructionof glued timber (GT), which is often used to cover large spans (more than 100 m) and the constructionof cross-laminated timber (CLT) or CLT (cross laminated timber), which are often from an oddnumber of layers of boards with their mutually perpendicular arrangement in adjacent layers. Panels used in panel and panel-frame construction of buildings of various complexity of architectural form and number of storeys are made of CLT. Inworks [1-3] studies of efficiency and CLT and methods of their calculation are described in moredetail. However, some building requirements, such as the conditions for limiting the building height,when the use of relatively large cross-sections of plywood constructions, calculated in compliance with the requirements of the boundary conditions, is not possible. Therefore, the search and study of modified efficiencies, including reinforced ones, to increase the bearing capacity while reducing their cross section is becoming increasingly important.This publication is devoted to the review of the conducted researches reinforced and reinforcedwith composite materials of various efficiencies.
- 28 December 2021
- Published by Kyiv National University of Construction and Architecture in Building constructions. Theory and Practice
- No. 9,p. 72-80
Open AccessREINFORCEMENT OF COMPOSITE WOODEN STRUCTURES MATERIALS, CONDITION AND PROSPECTS
Today, there is a growing need in the construction industry for the introduction of ecological urban space and the use of materials from renewable natural resources, one of such building materials from ancient times was wood.Temples, castles, houses, bridges and other structures have been erected all over the world sinceancient times with the help of wooden structures.A large number of buildings and structures made of wood have been operating successfully for 300-400 years and are vivid examples of the durability of these structures. Nowadays, wooden construction is developing rapidly with the development of new technologies. After all, new woodworking technologies allow obtaining a spliced array ofwood, which solves many different issues of wood as a structural material. Recently, the constructionof glued timber (GT), which is often used to cover large spans (more than 100 m) and the constructionof cross-laminated timber (CLT) or CLT (cross laminated timber), which are often from an oddnumber of layers of boards with their mutually perpendicular arrangement in adjacent layers. Panels used in panel and panel-frame construction of buildings of various complexity of architectural form and number of storeys are made of CLT. Inworks [1-3] studies of efficiency and CLT and methods of their calculation are described in moredetail. However, some building requirements, such as the conditions for limiting the building height,when the use of relatively large cross-sections of plywood constructions, calculated in compliance with the requirements of the boundary conditions, is not possible. Therefore, the search and study of modified efficiencies, including reinforced ones, to increase the bearing capacity while reducing their cross section is becoming increasingly important.This publication is devoted to the review of the conducted researches reinforced and reinforcedwith composite materials of various efficiencies.
- Open Access
- 24 December 2021
- Published by Yuri Kondratyuk Poltava Polytechnic in Збірник наукових праць Галузеве машинобудування будівництво/ Academic journal Industrial Machine Building Civil Engineering
- Vol. 2 (57) , 90-97
Analysis of the stress-strain state of laminated timber beams reinforced with composite tapes
The use of timber structures is gaining popularity around the world. The main laminated timber constructions are beams, the study of which has received much attention. To increase rigidity and strength, beam structures are reinforced. There are many different methods of reinforcing such structures (steel reinforcement, plates, composite reinforcement, etc.). The least researched one of them is reinforcement with composite tapes. For a further detailed analysis of the stress-strain state of laminated timber elements of rectangular cross-section reinforced with composite tapes, a number of numerical researches were performed using the finite element method in the LIRA-CAD software package using three-dimensional and flat finite elements, taking into account the features of work and structure of laminated timber beams and carbon fiber composite tapes. Therefore, according to the conducted research, this method of reinforcement can be considered effective.
- 24 December 2021
- Published by Yuri Kondratyuk Poltava Polytechnic in Збірник наукових праць Галузеве машинобудування будівництво/ Academic journal Industrial Machine Building Civil Engineering
- Vol. 2 (57) , 90-97
Open AccessAnalysis of the stress-strain state of laminated timber beams reinforced with composite tapes
The use of timber structures is gaining popularity around the world. The main laminated timber constructions are beams, the study of which has received much attention. To increase rigidity and strength, beam structures are reinforced. There are many different methods of reinforcing such structures (steel reinforcement, plates, composite reinforcement, etc.). The least researched one of them is reinforcement with composite tapes. For a further detailed analysis of the stress-strain state of laminated timber elements of rectangular cross-section reinforced with composite tapes, a number of numerical researches were performed using the finite element method in the LIRA-CAD software package using three-dimensional and flat finite elements, taking into account the features of work and structure of laminated timber beams and carbon fiber composite tapes. Therefore, according to the conducted research, this method of reinforcement can be considered effective.
- Open Access
- 29 October 2021
- Published by Kyiv National University of Construction and Architecture in Strength of Materials and Theory of Structures
- No. 107,p. 75-88
Method of calculation of panel buildings from cross-laminated timber
Building constructions made of cross-laminated timber become more and more widespread. Experience in the timber structures design and operation for various purposes confirms the feasibility of their use. Recently, the construction of prefabricated cross-laminated timber houses has become especially widespread. The problem solution of cross-laminated timber panels calculation by means of a finite element method with the material`s reduced mechanical characteristics application is offered in this article. The specified formulas for definition of the reduced geometrical and mechanical characteristics of cross-laminated timber panels` various types, including those made of combined cross-laminated timber, are resulted. The algorithm of cross-laminated timber panels calculation by means of a finite element method is resulted. The possibility of using flat finite elements taking into account orthotropic properties for the calculation of cross-laminated timber panels using the elasticity above modulus according to the above method, adjusting the Poisson's ratios so as to preserve the condition of elastic potential in timber, is reasoned.
- 29 October 2021
- Published by Kyiv National University of Construction and Architecture in Strength of Materials and Theory of Structures
- No. 107,p. 75-88
Open AccessMethod of calculation of panel buildings from cross-laminated timber
Building constructions made of cross-laminated timber become more and more widespread. Experience in the timber structures design and operation for various purposes confirms the feasibility of their use. Recently, the construction of prefabricated cross-laminated timber houses has become especially widespread. The problem solution of cross-laminated timber panels calculation by means of a finite element method with the material`s reduced mechanical characteristics application is offered in this article. The specified formulas for definition of the reduced geometrical and mechanical characteristics of cross-laminated timber panels` various types, including those made of combined cross-laminated timber, are resulted. The algorithm of cross-laminated timber panels calculation by means of a finite element method is resulted. The possibility of using flat finite elements taking into account orthotropic properties for the calculation of cross-laminated timber panels using the elasticity above modulus according to the above method, adjusting the Poisson's ratios so as to preserve the condition of elastic potential in timber, is reasoned.
- Open Access
- 31 August 2021
- Published by OU Scientific Route in ScienceRise
- No. 4,p. 17-23
Calculation of large-span glulam structures as a soil base-foundation-above-ground structure system
The object of research. Long-span glulam arches are widely used as coatings for public and sports buildings. The studies carried out concern double-hinged segmental arches with spans of 60 m and more. Description of the problem. The study of the peculiarities of the work of arches as a system "soil base - foundation - above-ground structure" is associated with the significant influence of uneven deformations of supports on the stress-strain state of the above-ground structure. A change in the stress-strain state in the structure itself, associated with uneven deformations of the foundations, can lead to a significant decrease up to the complete exhaustion of the bearing capacity Main scientific results. This article provides an analysis of the change in the stress-strain state of glulam arches when calculating the system "soil base-foundation-above-ground structure". It is noted that non-uniform deformations of supports have the greatest influence on the stress in the support zones of the structure. The range of critical non-uniform subsidence has been determined, which should be limited when calculating and designing the foundations of large-span arches. It has been confirmed that double-hinged glulam arches work well in conditions of uneven subsidence due to the peculiarities of the design scheme. The results of the studies carried out and the recommendations provided will significantly improve the reliability of large-span structures and require mandatory inclusion in the current practice of calculation and design. In addition, additional requirements for the distance between mine workings for large-span structures should be introduced when performing engineering and geological surveys. This distance should be reduced for a clearer account of the deformability of the foundations for columnar foundations, and the number of workings should be increased. The area of practical use of the research results. The cross-section of the glulam arches is selected taking into account additional deformations of the supports, making it possible to avoid unpredictable damage to the structure during operation. Innovative technological product. Glulam arches, the cross-section of which is determined taking into account additional deformations from uneven subsidence of the supports Scope of application. Glulam arches calculated in this way can be used as covering for public and sports buildings for various purposes.
- 31 August 2021
- Published by OU Scientific Route in ScienceRise
- No. 4,p. 17-23
Open AccessCalculation of large-span glulam structures as a soil base-foundation-above-ground structure system
The object of research. Long-span glulam arches are widely used as coatings for public and sports buildings. The studies carried out concern double-hinged segmental arches with spans of 60 m and more. Description of the problem. The study of the peculiarities of the work of arches as a system "soil base - foundation - above-ground structure" is associated with the significant influence of uneven deformations of supports on the stress-strain state of the above-ground structure. A change in the stress-strain state in the structure itself, associated with uneven deformations of the foundations, can lead to a significant decrease up to the complete exhaustion of the bearing capacity Main scientific results. This article provides an analysis of the change in the stress-strain state of glulam arches when calculating the system "soil base-foundation-above-ground structure". It is noted that non-uniform deformations of supports have the greatest influence on the stress in the support zones of the structure. The range of critical non-uniform subsidence has been determined, which should be limited when calculating and designing the foundations of large-span arches. It has been confirmed that double-hinged glulam arches work well in conditions of uneven subsidence due to the peculiarities of the design scheme. The results of the studies carried out and the recommendations provided will significantly improve the reliability of large-span structures and require mandatory inclusion in the current practice of calculation and design. In addition, additional requirements for the distance between mine workings for large-span structures should be introduced when performing engineering and geological surveys. This distance should be reduced for a clearer account of the deformability of the foundations for columnar foundations, and the number of workings should be increased. The area of practical use of the research results. The cross-section of the glulam arches is selected taking into account additional deformations of the supports, making it possible to avoid unpredictable damage to the structure during operation. Innovative technological product. Glulam arches, the cross-section of which is determined taking into account additional deformations from uneven subsidence of the supports Scope of application. Glulam arches calculated in this way can be used as covering for public and sports buildings for various purposes.