Shankar Mitra
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Shankar Mitra has a total of 22 co-authors. Here are the top co-authors by number of shared publications:
Subhotosh Banerjee
School of Geology and Geophysics, University of Oklahoma, Norman, Oklahoma 73019
3 shared publicationsJesus Hernandez Garcia
Petróleos Mexicanos, Ciudad del Carmen, Campeche, Mexico
2 shared publications- Shamik Bose
ConocoPhillips School of Geology and Geophysics, University of Oklahoma, 100 East Boyd Street, Suite 710, Norman, Oklahoma 73019
2 shared publications Antonio Murillo Alvarado
Petroleos Mexicanos, Cd. del Carmen, Campeche, Mexico
1 shared publication- Brett M. Carpenter
University of Oklahoma Norman OK USA
1 shared publication - Debapriya Paul
School of Geology and Geophysics, University of Oklahoma, Norman, Oklahoma 73019
1 shared publication
Latest Publications
- 29 March 2021
- Published by Society of Exploration Geophysicists in Interpretation
- Vol. 9 (3) , T653-T665
Synthetic transfer zone characterization using seismic attributes: An example from the Parihaka fault system in the Taranaki Basin, New Zealand
Synthetic transfer zones develop between fault segments that dip in the same direction, with relay ramps connecting the fault blocks separated by the different fault segments. The characteristics of the transfer zones are controlled by the lithology, deformation conditions, and strain magnitude. The Parihaka fault is a northeast–southwest-trending set of three major en echelon faults connected by relay ramps in the Taranaki Basin, New Zealand. The structure in the basin is defined by extension during two episodes of deformation between the late Cretaceous and Paleocene and between the late Miocene and recent. To better understand the evolution of a synthetic transfer zone, we studied the geometry and secondary faulting between the individual fault segments in the Parihaka fault system using structural interpretation of 3D seismic data and seismic attributes. This interpretation allows for a unique application of seismic attributes to better study transfer zones. Seismic attributes, such as coherence, dip, and curvature, are effective tools used to understand the detailed geometry and variation in displacement on the individual faults, the nature of secondary faulting along the transfer zones, and the relationship between the faults and drape folds. The seismic characterization of the fault system of Miocene to Pliocene age horizons highlights variations in the degree of faulting, deformation, and growth mechanism associated with different stages of transfer zone development. The coherence, dip, and curvature attributes indicate a direct correlation with structural parameters such as deformation, folding, and breaching of relay ramps. All three attributes enhance the visualization of the major and associated secondary faults and better constrain their tectonic history. The observed correlation between the seismic attributes and structural characteristics of transfer zones can significantly improve the structural interpretation and exploration workflow.
- 29 March 2021
- Published by Society of Exploration Geophysicists in Interpretation
- Vol. 9 (3) , T653-T665
Synthetic transfer zone characterization using seismic attributes: An example from the Parihaka fault system in the Taranaki Basin, New Zealand
Synthetic transfer zones develop between fault segments that dip in the same direction, with relay ramps connecting the fault blocks separated by the different fault segments. The characteristics of the transfer zones are controlled by the lithology, deformation conditions, and strain magnitude. The Parihaka fault is a northeast–southwest-trending set of three major en echelon faults connected by relay ramps in the Taranaki Basin, New Zealand. The structure in the basin is defined by extension during two episodes of deformation between the late Cretaceous and Paleocene and between the late Miocene and recent. To better understand the evolution of a synthetic transfer zone, we studied the geometry and secondary faulting between the individual fault segments in the Parihaka fault system using structural interpretation of 3D seismic data and seismic attributes. This interpretation allows for a unique application of seismic attributes to better study transfer zones. Seismic attributes, such as coherence, dip, and curvature, are effective tools used to understand the detailed geometry and variation in displacement on the individual faults, the nature of secondary faulting along the transfer zones, and the relationship between the faults and drape folds. The seismic characterization of the fault system of Miocene to Pliocene age horizons highlights variations in the degree of faulting, deformation, and growth mechanism associated with different stages of transfer zone development. The coherence, dip, and curvature attributes indicate a direct correlation with structural parameters such as deformation, folding, and breaching of relay ramps. All three attributes enhance the visualization of the major and associated secondary faults and better constrain their tectonic history. The observed correlation between the seismic attributes and structural characteristics of transfer zones can significantly improve the structural interpretation and exploration workflow.
- 1 March 2021
- Published by Elsevier in Marine and Petroleum Geology
- Vol. 125
Macroscopic structural styles in the southeastern Anadarko Basin, southern Oklahoma
- 1 March 2021
- Published by Elsevier in Marine and Petroleum Geology
- Vol. 125
Macroscopic structural styles in the southeastern Anadarko Basin, southern Oklahoma
- 1 February 2021
- Published by Society of Exploration Geophysicists in Interpretation
- Vol. 9 (1) , T107-T122
Structural analysis of the Wichita Uplift and structures in the Anadarko Basin, Southern Oklahoma
We have constructed regional structural transects across the Wichita Uplift and the adjacent Anadarko Basin to show the relationship between thick-skinned basement-involved structures and thin-skinned detached fold-thrust structures. Slip from the basement-involved structures in the Wichita Uplift is transferred along two major detachments into the Anadarko Basin. Our interpretation is that along the northwestern margin, the Wichita Uplift is marked by a zone of frontal imbricates forming a triangular wedge with most of the slip dissipated along the Wichita front. Paleozoic units show tight folding with overturned beds in the frontal zone. The uplift is episodic as indicated by the truncation of major faults along unconformities and their subsequent reactivation. In contrast, along the southeast margin, a significant part of the slip is transferred into structures in the Anadarko Basin. These structures are tight faulted-detachment folds that formed above a major detachment within the Springer Shale, cored by broader structures detaching at the base of the Arbuckle Group. Examples include the Carter-Knox, Cement-Chickasha, and Cruce structures. Oblique faults with normal and strike-slip components cut some of these structures, resulting in more complex geometries. We have determined that preexisting normal faults of Precambrian-Cambrian age were either reactivated along the Wichita Uplift or they controlled the location of the Pennsylvanian-age structures in the Anadarko Basin. Progressive rotation of regional stresses from northeast–southwest to a more east-northeast–west-southwest direction during the Pennsylvanian impacted the tectonic history of the area. We used 2D and 3D seismic, well-log data, and surface geology to evaluate the structural styles and tectonic evolution of the Wichita Uplift and the Anadarko Basin.
- 1 February 2021
- Published by Society of Exploration Geophysicists in Interpretation
- Vol. 9 (1) , T107-T122
Structural analysis of the Wichita Uplift and structures in the Anadarko Basin, Southern Oklahoma
We have constructed regional structural transects across the Wichita Uplift and the adjacent Anadarko Basin to show the relationship between thick-skinned basement-involved structures and thin-skinned detached fold-thrust structures. Slip from the basement-involved structures in the Wichita Uplift is transferred along two major detachments into the Anadarko Basin. Our interpretation is that along the northwestern margin, the Wichita Uplift is marked by a zone of frontal imbricates forming a triangular wedge with most of the slip dissipated along the Wichita front. Paleozoic units show tight folding with overturned beds in the frontal zone. The uplift is episodic as indicated by the truncation of major faults along unconformities and their subsequent reactivation. In contrast, along the southeast margin, a significant part of the slip is transferred into structures in the Anadarko Basin. These structures are tight faulted-detachment folds that formed above a major detachment within the Springer Shale, cored by broader structures detaching at the base of the Arbuckle Group. Examples include the Carter-Knox, Cement-Chickasha, and Cruce structures. Oblique faults with normal and strike-slip components cut some of these structures, resulting in more complex geometries. We have determined that preexisting normal faults of Precambrian-Cambrian age were either reactivated along the Wichita Uplift or they controlled the location of the Pennsylvanian-age structures in the Anadarko Basin. Progressive rotation of regional stresses from northeast–southwest to a more east-northeast–west-southwest direction during the Pennsylvanian impacted the tectonic history of the area. We used 2D and 3D seismic, well-log data, and surface geology to evaluate the structural styles and tectonic evolution of the Wichita Uplift and the Anadarko Basin.
- 1 February 2020
- Published by Society of Exploration Geophysicists in Interpretation
- Vol. 8 (1) , T55-T65
Seismic modeling and expression of common fold-thrust structures
We have conducted seismic modeling of common fold-thrust structures to understand the common geologic parameters influencing seismic data and to understand the common pitfalls associated with interpreting prestack time migration (PSTM) and prestack depth migration (PSDM) data. Mode 1 fault-bend folds are generally well-imaged in PSTM data, provided the correct migration velocities are used for the dipping back and front limbs. Seismic pull-ups of the footwall related to lateral velocity variations can result in problems in interpreting the fault geometry and the subthrust area underlying the crest. Fault-tip fault-propagation folds also show significant footwall pull-ups and show poor to no imaging of the steep front limbs. The geometry of trishear fault-propagation folds is dependent on the maximum slip on the fault (S) and the fault propagation to slip ratio (P/S ratio). We found that the slip has a strong influence on the dip of the front limb and therefore the quality of imaging whereas the P/S ratio, which controls the degree of folding versus thrust faulting, has only a secondary effect. For the front limb, only the area near the synclinal axial plan is well-imaged, so that the fault geometry and extent of propagation are typically difficult to interpret. The front limb dips are also sensitive to the accuracy of the rms velocity model used for migration. Lower velocities result in steeper dipping reflectors, whereas higher velocities result in shallower dips. In general, PSDM provides better imaging of the structures; however, the accuracy and quality of the image are dependent on the velocity models and interpretation derived from the PSTM data.
- 1 February 2020
- Published by Society of Exploration Geophysicists in Interpretation
- Vol. 8 (1) , T55-T65
Seismic modeling and expression of common fold-thrust structures
We have conducted seismic modeling of common fold-thrust structures to understand the common geologic parameters influencing seismic data and to understand the common pitfalls associated with interpreting prestack time migration (PSTM) and prestack depth migration (PSDM) data. Mode 1 fault-bend folds are generally well-imaged in PSTM data, provided the correct migration velocities are used for the dipping back and front limbs. Seismic pull-ups of the footwall related to lateral velocity variations can result in problems in interpreting the fault geometry and the subthrust area underlying the crest. Fault-tip fault-propagation folds also show significant footwall pull-ups and show poor to no imaging of the steep front limbs. The geometry of trishear fault-propagation folds is dependent on the maximum slip on the fault (S) and the fault propagation to slip ratio (P/S ratio). We found that the slip has a strong influence on the dip of the front limb and therefore the quality of imaging whereas the P/S ratio, which controls the degree of folding versus thrust faulting, has only a secondary effect. For the front limb, only the area near the synclinal axial plan is well-imaged, so that the fault geometry and extent of propagation are typically difficult to interpret. The front limb dips are also sensitive to the accuracy of the rms velocity model used for migration. Lower velocities result in steeper dipping reflectors, whereas higher velocities result in shallower dips. In general, PSDM provides better imaging of the structures; however, the accuracy and quality of the image are dependent on the velocity models and interpretation derived from the PSTM data.
- 1 April 2014
- Published by American Association of Petroleum Geologists AAPG/Datapages in AAPG Bulletin
- Vol. 98 (4) , 825-849
Structural analysis of a salt-cored transfer zone in the South Timbalier Block 54, offshore Gulf of Mexico: Implications for restoration of salt-related extensional structures
The style of faulting in offshore Louisiana, Gulf of Mexico, is characterized by short, arcuate regional and counterregional growth faults, which commonly form complex transfer zones above shallow, Miocene level salt bodies. South Timbalier Block 54 (ST54) constitutes one such area where a basinward-dipping regional and a landward-dipping counterregional growth fault form a convergent transfer zone. Structural interpretation using three-dimensional (3-D) seismic and well data reveals that the eastern and western flanks of the structure contain salt in the footwalls of the main regional and counterregional faults. The salt rises to a much shallower stratigraphic level in the central part of the transfer zone, forming a symmetric salt diapir. Secondary antithetic and synthetic faults adjacent to the two main faults and extending into the transfer zone accommodate slip between the main faults. Kinematic restoration of a series of north–south-trending cross sections across the structure show that upslope evacuation of salt is the result of sediment loading and growth fault movement, and the location of the transfer zone is possibly controlled by the allochthonous salt. The entire area is characterized by down-to-basin movement, with the major regional and counterregional faults displaying footwall and hanging-wall fixed deformation, respectively. The presence of the crestal graben above the salt high and the timing of maximum salt evacuation from the flanks suggest that active or reactive diapirism occurred during part of the deformation history. A 3-D structural model using depth-converted horizons, balanced cross sections, and well tops accurately portrays the subsurface structure. Understanding the evolution of the structure in ST54 provides insight on similar structures in other areas in offshore Louisiana and the relationship between salt evacuation and transfer zone development.
- 1 April 2014
- Published by American Association of Petroleum Geologists AAPG/Datapages in AAPG Bulletin
- Vol. 98 (4) , 825-849
Structural analysis of a salt-cored transfer zone in the South Timbalier Block 54, offshore Gulf of Mexico: Implications for restoration of salt-related extensional structures
The style of faulting in offshore Louisiana, Gulf of Mexico, is characterized by short, arcuate regional and counterregional growth faults, which commonly form complex transfer zones above shallow, Miocene level salt bodies. South Timbalier Block 54 (ST54) constitutes one such area where a basinward-dipping regional and a landward-dipping counterregional growth fault form a convergent transfer zone. Structural interpretation using three-dimensional (3-D) seismic and well data reveals that the eastern and western flanks of the structure contain salt in the footwalls of the main regional and counterregional faults. The salt rises to a much shallower stratigraphic level in the central part of the transfer zone, forming a symmetric salt diapir. Secondary antithetic and synthetic faults adjacent to the two main faults and extending into the transfer zone accommodate slip between the main faults. Kinematic restoration of a series of north–south-trending cross sections across the structure show that upslope evacuation of salt is the result of sediment loading and growth fault movement, and the location of the transfer zone is possibly controlled by the allochthonous salt. The entire area is characterized by down-to-basin movement, with the major regional and counterregional faults displaying footwall and hanging-wall fixed deformation, respectively. The presence of the crestal graben above the salt high and the timing of maximum salt evacuation from the flanks suggest that active or reactive diapirism occurred during part of the deformation history. A 3-D structural model using depth-converted horizons, balanced cross sections, and well tops accurately portrays the subsurface structure. Understanding the evolution of the structure in ST54 provides insight on similar structures in other areas in offshore Louisiana and the relationship between salt evacuation and transfer zone development.
- 1 May 2013
- Published by American Association of Petroleum Geologists AAPG/Datapages in AAPG Bulletin
- Vol. 97 (5) , 759-780
Experimental models of transfer zones in rift systems
Transfer zones in rift basins are classified into convergent, divergent, and synthetic, based on the relative dip directions of adjacent faults within the transfer zone. Experimental models were constructed to determine the geometry, evolution, and fault patterns associated with each of these transfer zones. In addition, basement faults with initially approaching, laterally offset, and overlapping geometries were modeled. The models consisted of two layers, with stiff clay representing basement and soft clay representing the sedimentary cover. Laser scanning and three-dimensional surface modeling were used to determine the map geometry to compare the models with examples of natural structures. The experimental models showed many similarities with conceptual models but also showed more details and a few significant differences. Typically, divergent transfer zones are narrower than convergent transfer zones, for the same initial spacing between basement faults. The differences between the different initial fault configurations (approaching, laterally offset, or overlapping) are the degree of interaction of the secondary faults, the amount of overlap between the fault zones, and in some cases, the width of the transfer zone. The main faults propagate laterally and upward and curve in the direction of dip of the faults, so that the faults curve toward each other in convergent transfer zones, away from each other in divergent transfer zones, and in the same direction in synthetic transfer zones. A primary difference with schematic models is the significant component of extensional fault propagation folding (drape folding), accompanied by secondary faulting within the sedimentary cover, especially in the early stages of fault propagation. Therefore, all three types of transfer zones are characterized by significant folding and related variations in the shapes of structures. The transfer zones are marked by a progressive change in relief from the footwall to the hanging wall, resulting in a saddle-shaped geometry. The hanging walls of the faults are marked by a gentle flexure or rollover into the fault, with the amount of flexure increasing with fault throw away from the fault tip. The geometries and fault patterns of the experimental structures match some of the observations in natural structures and also provide predictive analogs for interpretation of surface and subsurface structures and the delineation of structural traps in rift basins.
- 1 May 2013
- Published by American Association of Petroleum Geologists AAPG/Datapages in AAPG Bulletin
- Vol. 97 (5) , 759-780
Experimental models of transfer zones in rift systems
Transfer zones in rift basins are classified into convergent, divergent, and synthetic, based on the relative dip directions of adjacent faults within the transfer zone. Experimental models were constructed to determine the geometry, evolution, and fault patterns associated with each of these transfer zones. In addition, basement faults with initially approaching, laterally offset, and overlapping geometries were modeled. The models consisted of two layers, with stiff clay representing basement and soft clay representing the sedimentary cover. Laser scanning and three-dimensional surface modeling were used to determine the map geometry to compare the models with examples of natural structures. The experimental models showed many similarities with conceptual models but also showed more details and a few significant differences. Typically, divergent transfer zones are narrower than convergent transfer zones, for the same initial spacing between basement faults. The differences between the different initial fault configurations (approaching, laterally offset, or overlapping) are the degree of interaction of the secondary faults, the amount of overlap between the fault zones, and in some cases, the width of the transfer zone. The main faults propagate laterally and upward and curve in the direction of dip of the faults, so that the faults curve toward each other in convergent transfer zones, away from each other in divergent transfer zones, and in the same direction in synthetic transfer zones. A primary difference with schematic models is the significant component of extensional fault propagation folding (drape folding), accompanied by secondary faulting within the sedimentary cover, especially in the early stages of fault propagation. Therefore, all three types of transfer zones are characterized by significant folding and related variations in the shapes of structures. The transfer zones are marked by a progressive change in relief from the footwall to the hanging wall, resulting in a saddle-shaped geometry. The hanging walls of the faults are marked by a gentle flexure or rollover into the fault, with the amount of flexure increasing with fault throw away from the fault tip. The geometries and fault patterns of the experimental structures match some of the observations in natural structures and also provide predictive analogs for interpretation of surface and subsurface structures and the delineation of structural traps in rift basins.
- Open Access
- 1 April 2011
- Published by American Association of Petroleum Geologists AAPG/Datapages in AAPG Bulletin
- Vol. 95 (4) , 675-689
Deformation and secondary faulting associated with basement-involved compressional and extensional structures
Experimental clay modeling is used to study the geometry and evolution of deformation zones formed above basement faults. The nature of deformation is compared for reverse faults dipping 30, 45, and 60°, vertical faults, and normal faults dipping 60 and 75°. Basement faulting results in the formation of a sheared triangular deformation zone that widens upward in the cover units. Most of the deformation is focused within a central zone of secondary faults, which propagate upward and eventually break through the entire section. Basal units exhibit steeper dips and higher fault densities, whereas stratigraphically higher units exhibit gentler dips and lower fault densities. The width of the deformation zone is generally greater for reverse faults with low dips. The anticlinal axial surface typically dips in the same direction as the synclinal axial surface for low- to moderate-angle reverse faults; however, the axial surfaces dip in opposite directions for vertical faults and normal faults. Particle paths suggest a convex upward rotation within the deformation zone, suggesting transfer of material across the extension of the master fault. Reverse faults are associated with secondary faults with reverse and thrust separations. Vertical faults are associated with mostly vertical and reverse secondary faults, whereas normal faults are generally associated with normal separation of most secondary faults. Therefore, the nature of secondary faults varies with structural position, possibly within the same layer. These results provide some key insights that are useful in the interpretation of macroscopic surface and subsurface basement–involved structures.
- 1 April 2011
- Published by American Association of Petroleum Geologists AAPG/Datapages in AAPG Bulletin
- Vol. 95 (4) , 675-689
Open AccessDeformation and secondary faulting associated with basement-involved compressional and extensional structures
Experimental clay modeling is used to study the geometry and evolution of deformation zones formed above basement faults. The nature of deformation is compared for reverse faults dipping 30, 45, and 60°, vertical faults, and normal faults dipping 60 and 75°. Basement faulting results in the formation of a sheared triangular deformation zone that widens upward in the cover units. Most of the deformation is focused within a central zone of secondary faults, which propagate upward and eventually break through the entire section. Basal units exhibit steeper dips and higher fault densities, whereas stratigraphically higher units exhibit gentler dips and lower fault densities. The width of the deformation zone is generally greater for reverse faults with low dips. The anticlinal axial surface typically dips in the same direction as the synclinal axial surface for low- to moderate-angle reverse faults; however, the axial surfaces dip in opposite directions for vertical faults and normal faults. Particle paths suggest a convex upward rotation within the deformation zone, suggesting transfer of material across the extension of the master fault. Reverse faults are associated with secondary faults with reverse and thrust separations. Vertical faults are associated with mostly vertical and reverse secondary faults, whereas normal faults are generally associated with normal separation of most secondary faults. Therefore, the nature of secondary faults varies with structural position, possibly within the same layer. These results provide some key insights that are useful in the interpretation of macroscopic surface and subsurface basement–involved structures.
- 1 September 2010
- Published by American Association of Petroleum Geologists AAPG/Datapages in AAPG Bulletin
- Vol. 94 (9) , 1425-1452
Analog modeling of divergent and convergent transfer zones in listric normal fault systems
Transfer zones are common features in passive margins such as the Gulf of Mexico, where deformation between adjacent listric normal faults is accommodated by the formation of complex secondary fault systems. Two common types of transfer zones are (1) convergent, with the main faults dipping toward each other, and (2) divergent, with the main faults dipping away from each other. Analog clay models are developed for both convergent and divergent transfer zones with the faults approaching each other, offset by 90°, and overlapping each other. During extension, the structures initiate as symmetric grabens and later transform into asymmetric half grabens. The main fault and associated synthetic faults form a narrow zone of deformation, whereas the antithetic faults develop into a broader zone constituting evenly spaced discrete fault segments. Orientations, lengths, densities, and sizes of connected fault clusters vary with the type of transfer zone, structural position relative to the fault offsets, and total extension. The experiments show that the antithetic faults in convergent transfer zones and synthetic faults in divergent transfer zones tend to be more consistent in orientation and connect easily. Synthetic faults in convergent transfer zones and antithetic faults in divergent transfer zones change orientation along strike toward the transfer zone. Fault connectivity in approaching transfer zones is generally higher than in normal offset or overlapping configurations. The analog models provide important insights on the geometry of fault patterns and possible fluid-migration pathways within transfer zones.
- 1 September 2010
- Published by American Association of Petroleum Geologists AAPG/Datapages in AAPG Bulletin
- Vol. 94 (9) , 1425-1452
Analog modeling of divergent and convergent transfer zones in listric normal fault systems
Transfer zones are common features in passive margins such as the Gulf of Mexico, where deformation between adjacent listric normal faults is accommodated by the formation of complex secondary fault systems. Two common types of transfer zones are (1) convergent, with the main faults dipping toward each other, and (2) divergent, with the main faults dipping away from each other. Analog clay models are developed for both convergent and divergent transfer zones with the faults approaching each other, offset by 90°, and overlapping each other. During extension, the structures initiate as symmetric grabens and later transform into asymmetric half grabens. The main fault and associated synthetic faults form a narrow zone of deformation, whereas the antithetic faults develop into a broader zone constituting evenly spaced discrete fault segments. Orientations, lengths, densities, and sizes of connected fault clusters vary with the type of transfer zone, structural position relative to the fault offsets, and total extension. The experiments show that the antithetic faults in convergent transfer zones and synthetic faults in divergent transfer zones tend to be more consistent in orientation and connect easily. Synthetic faults in convergent transfer zones and antithetic faults in divergent transfer zones change orientation along strike toward the transfer zone. Fault connectivity in approaching transfer zones is generally higher than in normal offset or overlapping configurations. The analog models provide important insights on the geometry of fault patterns and possible fluid-migration pathways within transfer zones.
- 1 November 2009
- Published by American Association of Petroleum Geologists AAPG/Datapages in AAPG Bulletin
- Vol. 93 (11) , 1517-1533
Two-dimensional simulation of controls of fracture parameters on fracture connectivity
Two-dimensional fracture simulation is conducted to analyze the controls of different fracture parameters (variations in fracture orientation, density, and length) on fracture network connectivity. Three different scenarios, which are commonly encountered in natural fracture systems, are analyzed: (1) a single fracture set; (2) two fracture sets, with one primary through going set; and (3) two fracture sets with approximately equal parameters. The modeling reveals that certain parameters are more dominant in controlling the connectivity for each of the settings. For a single set of fractures, increases in length and dispersion and a decrease in spacing all result in higher fracture-parallel connectivity, but the decrease in spacing is the most important in increasing fracture-normal connectivity, especially where the dispersion in fracture strike is very low. Simulations of two sets of fractures reveal that the density, length, and angle between the two sets are important factors in producing complete connectivity. In cases where one set of fractures is a systematic throughgoing set, a critical combination of length of the second set and the angle between the two sets results in complete connectivity. Where both sets of fractures have varying length and density, the influence of increasing density of one set has a great effect on connectivity when the other set is short and a more subtle to insignificant change when the other set is long. The network also shows higher connectivity with increasing angles (up to 90°) between the two sets.
- 1 November 2009
- Published by American Association of Petroleum Geologists AAPG/Datapages in AAPG Bulletin
- Vol. 93 (11) , 1517-1533
Two-dimensional simulation of controls of fracture parameters on fracture connectivity
Two-dimensional fracture simulation is conducted to analyze the controls of different fracture parameters (variations in fracture orientation, density, and length) on fracture network connectivity. Three different scenarios, which are commonly encountered in natural fracture systems, are analyzed: (1) a single fracture set; (2) two fracture sets, with one primary through going set; and (3) two fracture sets with approximately equal parameters. The modeling reveals that certain parameters are more dominant in controlling the connectivity for each of the settings. For a single set of fractures, increases in length and dispersion and a decrease in spacing all result in higher fracture-parallel connectivity, but the decrease in spacing is the most important in increasing fracture-normal connectivity, especially where the dispersion in fracture strike is very low. Simulations of two sets of fractures reveal that the density, length, and angle between the two sets are important factors in producing complete connectivity. In cases where one set of fractures is a systematic throughgoing set, a critical combination of length of the second set and the angle between the two sets results in complete connectivity. Where both sets of fractures have varying length and density, the influence of increasing density of one set has a great effect on connectivity when the other set is short and a more subtle to insignificant change when the other set is long. The network also shows higher connectivity with increasing angles (up to 90°) between the two sets.
- 1 August 2009
- Published by American Association of Petroleum Geologists AAPG/Datapages in AAPG Bulletin
- Vol. 93 (8) , 995-1014
Structural controls of fracture orientations, intensity, and connectivity, Teton anticline, Sawtooth Range, Montana
The Teton anticline is a multiple hinge anticline containing fractured Mississippian–Devonian carbonates in the frontal part of the Sawtooth Range in Montana. The structure serves as a good surface analog for fracture patterns and connectivities within subsurface-folded carbonate reservoirs. The primary fracture sets are longitudinal and transverse relative to the axis of the fold, although two additional oblique sets are also present. The length and density of the longitudinal fracture sets are strongly controlled by position relative to multiple hinges. The transverse fractures are related to changes in fold plunge and exhibit less variation in fracture density. Fracture connectivity is dependent on the number of fracture sets, their orientations and dispersions, and the densities of the fracture sets. The connectivity is measured using two parameters: the fractional connected area (FCA), which represents the fraction of the total sample area that is connected by fractures, and the distribution of clusters of different sizes in any given area. Because the longitudinal fractures represent the dominant fracture set and also show the most variation with structural position, the fracture connectivity, as measured by both the FCAs and the distribution of cluster sizes, is greater in the vicinity of the fold hinges. The results and approaches used in the study have some important implications for subsurface-folded fractured carbonate reservoirs. The analysis of sparsely distributed fracture data from wells must be integrated with an understanding of the controls of the macroscopic structure on fracture parameters to effectively simulate fracture patterns and connectivities around subsurface structures.
- 1 August 2009
- Published by American Association of Petroleum Geologists AAPG/Datapages in AAPG Bulletin
- Vol. 93 (8) , 995-1014
Structural controls of fracture orientations, intensity, and connectivity, Teton anticline, Sawtooth Range, Montana
The Teton anticline is a multiple hinge anticline containing fractured Mississippian–Devonian carbonates in the frontal part of the Sawtooth Range in Montana. The structure serves as a good surface analog for fracture patterns and connectivities within subsurface-folded carbonate reservoirs. The primary fracture sets are longitudinal and transverse relative to the axis of the fold, although two additional oblique sets are also present. The length and density of the longitudinal fracture sets are strongly controlled by position relative to multiple hinges. The transverse fractures are related to changes in fold plunge and exhibit less variation in fracture density. Fracture connectivity is dependent on the number of fracture sets, their orientations and dispersions, and the densities of the fracture sets. The connectivity is measured using two parameters: the fractional connected area (FCA), which represents the fraction of the total sample area that is connected by fractures, and the distribution of clusters of different sizes in any given area. Because the longitudinal fractures represent the dominant fracture set and also show the most variation with structural position, the fracture connectivity, as measured by both the FCAs and the distribution of cluster sizes, is greater in the vicinity of the fold hinges. The results and approaches used in the study have some important implications for subsurface-folded fractured carbonate reservoirs. The analysis of sparsely distributed fracture data from wells must be integrated with an understanding of the controls of the macroscopic structure on fracture parameters to effectively simulate fracture patterns and connectivities around subsurface structures.