CŞCanan Şamdan

Canan Şamdan

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Canan Şamdan has a total of 22 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Valorization of pinus and cedrus acicular leaves as bio-based fibers for reinforced cementitious composites: Extraction, microstructural characterization and mechanical performance

    by Fatih Şamdan, Canan Şamdan, Mehmet Canbaz

    In modern construction applications, various cement-based composite material systems are being developed using forest products and forest waste, such as biobased fibers. These composites serve as sustainable building materials, including wood-cement composites, fiber-reinforced panels, lightweight building elements, and precast building components, especially in non-load-bearing architectural applications. In this study, the physical and mechanical properties of a composite produced in a similar manner, using acicular leaves of Pinus nigra and Cedrus libani as natural fibers, were examined. In this context, the fibers underwent a multi-stage pre-treatment, including hot water extraction, alkaline treatment, and Ca(OH)₂ mineralization, followed by characterization; the treatments were verified by SEM, EDS, and FTIR analyses. Short Cedrus fibers are randomly distributed in the matrix to form an isotropic structure, while long Pinus fibers are oriented perpendicular to the load direction to obtain an orthotropic structure. Unit weight, ultrasonic pulse velocity, dynamic modulus of elasticity, and compressive, flexural, and splitting tensile strengths were determined. When compared, short, isotropic cedar fibers showed higher compressive strength, while long, oriented pine fibers exhibited superior bending and splitting tensile performance.

  • Open Access

    Effectiveness of TiO2 coating on concrete surfaces for photocatalytic degradation of solutions

    by Fatih Şamdan, Canan Şamdan, Emir Günaltılı, Serdal Ünal, Mehmet Canbaz

    In this study, the photocatalytic performance of TiO₂-coated concrete surfaces was systematically investigated with respect to coating configuration and catalyst loading using methylene blue (MB) and Rhodamine B (Rh-B) as model organic pollutants. TiO₂ was applied onto concrete surfaces at different concentrations (5, 10, 15, and 20 wt%) in both single-layer and double-layer configurations, and the degradation behavior of the dyes under UV irradiation was evaluated. The results revealed that increasing TiO₂ content significantly enhanced photocatalytic activity in both coating configurations. However, double-layer coatings consistently outperformed single-layer systems, particularly at higher TiO₂ loadings. The maximum degradation efficiencies reached 52.12% for MB and 77.4% for Rh-B under UV irradiation, demonstrating the effectiveness of TiO₂-coated surfaces in removing organic pollutants. Kinetic analysis indicated that the photocatalytic degradation process followed pseudo-first-order kinetics, with higher apparent rate constants (Kapp) observed in double-layer systems. This enhancement was attributed to increased availability of active sites, improved light utilization, and more efficient charge-carrier dynamics. Mechanistically, the generation of reactive oxygen species (ROS), such as hydroxyl and superoxide radicals, along with improved charge separation facilitated by surface hydroxyl groups and oxygen vacancies, played a key role in enhancing photocatalytic performance. Overall, the findings demonstrate that optimizing both TiO₂ loading and coating architecture provides an effective strategy for improving the photocatalytic efficiency of cement-based materials. The proposed double-layer TiO₂ coating system offers significant potential for developing self-cleaning, environmentally responsive construction materials for urban applications.

  • Open Access

    Bio-based cementitious composites reinforced with natural fibers derived from Cedrus libani A.Rich. acicular leaf: Extraction, microstructural characterization, and mechanical performance after thermal exposure

    by Fatih Şamdan, Canan Şamdan, Mehmet Canbaz

    This study investigates the physical and mechanical performance of bio-based cementitious composites produced with natural fibers obtained from dried, fallen acicular leaf of Cedrus libani A.Rich. The fibers underwent a multi-stage pre-treatment prior to composite production, including hot water extraction, alkaline treatment (NaOH), and Ca(OH)₂ mineralization. Changes in surface morphology and chemical composition were confirmed by SEM and EDS analyses, and significant calcium enrichment and increased roughness were observed on the fiber surface after mineralization. Specimens produced with aggregate- and additive-free mixtures were exposed to temperatures of 20, 200, and 400 °C for 3 hours at the end of the curing periods. Unit volume weight, ultrasonic pulse velocity, compressive, flexural, and splitting tensile strengths were determined, and the dynamic modulus of elasticity was calculated. The results showed that limited losses in mechanical properties occurred up to 200 °C, while more significant reductions in strength and stiffness occurred at 400 °C due to microcrack formation and weakening of the fiber-matrix interface. It was determined that mixtures with a high fiber/cement ratio partially limit crack progression and reduce strength loss in certain temperature ranges. The findings reveal the mechanical properties of Cedrus libani acicular leaf fibers as reinforcement in cementitious composites after thermal exposure.

  • Open Access

    Evaluation and characterization of waste walnut shells as a porous material

    by İlknur Demıral, Betül Aslan, Canan Şamdan

    The demand for porous materials in consumer products and for societal welfare improvements has led to 20th-century global regulations aimed at reducing pollution. The increased need for energy resources and storage materials further boosts demand. A key factor affecting activated carbon costs, a porous material, is raw material source; walnut shells are highly suitable. In 2023, Türkiye produced ~360,000 tons of walnuts, resulting in ~180,000 tons of shell waste, often discarded or incinerated. Converting these shells into products is essential. Activated carbon is made by carbonizing biomass in an oxygen-free environment. This study used walnut shells as a carbon source to synthesize a porous solid, achieving a surface area of 1328 m²/g at 400 °C with a 4:1 impregnation ratio.


  • Investigation of the Potential of Super-Activated Carbon Production from Fish Wastes: The Example of Invasive Species Carassius Gibelio

    by Canan Şamdan, Hakan Demiral, Esengül Köse, Naile Karakehya, Sadi Aksu, Özgür Emiroğlu

    Exploring the potential of Carassius gibelio (Bloch, 1782) in producing super-activated carbon is a promising area of research. This fish species is known for its ability to accumulate heavy metals, making it a potentially valuable resource for synthesising activated carbon. By investigating this possibility, we could not only contribute to the development of more eco-friendly and sustainable methods of carbon synthesis but also potentially find a new use for this unique aquatic organism. In the study conducted for this purpose, super-activated carbon production was carried out through chemical agents using different regions of the invasive species such as Gill, Scale Skin, Internal Organs, Fin and Muscle. The surface properties of super-activated carbons have been tried to be characterised by various analyses. According to the study's results, super-activated carbon with a surface area of 2053 m2/g consisting of approximately 61% micro and 39% meso pore structures was synthesised from the fish's gills. The results revealed that the invasive Carassius gibelio may be a high-potential source of super-activated carbon.

  • Open Access

    Synthesis and Characterization of Porous Materials from Waste Wheat Bran

    by İlknur Demıral, Canan Şamdan, Fatma Betül Kuş

    The purpose of this study was to investigate how the amount of ZnCl2 and temperature affect the process of converting waste wheat bran, known for its hemicellulose struc-ture, into porous material. The characterization of the wheat bran was done using proximate and primary component analysis, and Thermogravimetric analysis (TG) test, Fourier Transform Infrared Spectroscopy (FT-IR) spectra, Energy-dispersive X-ray spectroscopy (EDS) results, and Scanning electron microscopy (SEM) images. The influence of temperature on the surface areas of activated carbons is more significant than the impact of varying the amount of ZnCl2. When the carbonization temperature reached 500 °C, porous structures developed, and the highest surface areas achieved for all impregnation ratios (1:1, 2:1, and 3:1) were 1234, 1478, and 1422 m2/g, respectively. Activated carbon was found to have acidic (0.88 mmol/g) and basic (0.54 mmol/g) functional groups on its surface, after being synthesized through carbonization at 500 °C using ZnCl2 at a 2:1 impregnation ratio in accordance with Boehm titration. This promising activared carbon made from wheat bran, activated by ZnCl2, is efficient and environmentally friendly, and it is a potential solution for water pollution treatment.


  • DETERMINATION OF DEEP RED REMOVAL POTENTIAL OF ACTIVATED CARBON PRODUCED FROM WHEAT BRAN

    by İlknur Demıral, Canan Şamdan, Fatma Betül Kus

    In this study, the production of activated carbon from wheat bran was carried out through the chemical activation method. ZnCl2 was used as the chemical agent in the chemical activation. The impregnation ratio was determined as 2:1, and the activation temperature was set to 500 °C. The obtained activated carbon was utilized for the removal of the Deep red dye substance from aqueous solutions. The adsorption studies resulted in the highest adsorption capacity under conditions of pH 2.17, a duration of 24 h and a temperature of 45 °C, providing a removal of 95.238 mg/g. The adsorption studies were evaluated by examining adsorption isotherms, adsorption kinetics, and adsorption thermodynamics. It was determined that this adsorption study is in accordance with the pseudo-second-order kinetic model and Langmuir isotherm. According to adsorption thermodynamics, adsorption is endothermic and occurs physically. These results indicate that activated carbon produced from wheat bran can be effectively used to remove the Deep red dye substance from wastewater.

  • Effective degradation of bentazone by two-dimensional and three-phase, three-dimensional electro-oxidation system: kinetic studies and optimization using ANN

    by Canan Samdan, Hakan Demiral, Yunus Emre Simsek, Ilknur Demiral, Belgin Karabacakoglu, Tugce Bozkurt, Hatice Hurrem Cin

    Bentazone is a broad-leaved weed-specific herbicide in the pesticide industry. This study focused on removing bentazone from water using three different methods: a two and three-dimensional electro-oxidation process (2D/EOP and 3D/EOP) with a fluid-type reactor arrangement using tetraethylenepentamine-loaded particle electrodes and an adsorption method. Additionally, we analysed the effects of two types of supporting electrolytes (Na2SO4 and NaCl) on the degradation process. The energy consumption amounts were calculated to evaluate the obtained results. The degradation reaction occurs 3.5 times faster in 3D/EOP than in 2D/EOP at 6 V in Na2SO4. Similarly, the degradation reaction of bentazone in NaCl occurs 2.5 times faster in 3D/EOP than in 2D/EOP at a value of 7.2 mA/cm2. Removal of bentazone is significantly better in 3D/EOPs than in 2D/EOPs. The use of particle electrodes can significantly enhance the degradation efficiency. The study further assessed the prediction abilities of the machine learning model (ANN). The ANN presented reasonable accuracy in bentazone degradation with high R2 values of 0.97953, 0.98561, 0.98563, and 0.99649 for 2D with Na2SO4, 2D with NaCl, 3D with Na2SO4, and 3D with NaCl, respectively.