Anzhela V. Yakovenko
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Anzhela V. Yakovenko has a total of 25 co-authors. Here are the top co-authors by number of shared publications:
- Lyubov Kazymyrivna Patrylak
V.P. Kukhar Institute of Bioorganic Chemistry and Petrochemistry of the NAS of Ukraine
23 shared publications - Olexandra Pertko
V.P. Kukhar Institute of Bioorganic Chemistry and Petrochemistry of the National Academy of Sciences of Ukraine, Akademika Kukharia street, 1, Ukraine, Kyiv-02094
19 shared publications - Volodymyr Povazhnyi
V.P. Kukhar Institute of Bioorganic Chemistry and Petrochemistry of the National Academy of Sciences of Ukraine, Akademika Kukharia street, 1, Ukraine, Kyiv-02094
14 shared publications - Serhiy V. Konovalov
V.P Kukhar Institute of Bioorganic Chemistry and Petrochemistry of National Academy of Sciences of Ukraine 1 Academician Kukhar Str., Kyiv, 02094, Ukraine
11 shared publications - Yuliya G. Voloshyna
V.P. Kukhar Institute of Bioorganic Chemistry and Petrochemistry of the National Academy of Sciences of Ukraine, Akademika Kukharia street, 1, Ukraine, Kyiv-02094
11 shared publications - Oleksandr Melnychuk
V.P Kukhar Institute of Bioorganic Chemistry and Petrochemistry of NAS of Ukraine. Kharkivske shosse, 50, Kyiv-02160, Ukraine
8 shared publications
Latest Publications
- Open Access
- 7 October 2026
- Published by Springer Nature in Research Square
Congo red photocatalytic degradation on the copper nanoparticles deposited on carriers
Photocatalytic removal of dyes from aqueous solutions is an important process in the context of environmental protection due to synthetic dyes are common pollutants that are difficult to biodegrade and have negative impacts on ecosystems. The aim of the present work was to compare photocatalytical properties of copper nanoparticles deposited on two inorganic carriers: gamma alumina and natural cliniptilolite type zeolite. Copper-containing samples (4.5 wt. % of Cu) were obtained by impregnation of copper nitrate and its reduction with ascorbic acid. Catalysts were characterized by means of XRD, XRF, TEM, SEM, and low temperature nitrogen adsorption/desorption. The formation of nanoparticles was confirmed by TEM images. Particles predominant dimension for both samples was 2–3 nm. However, zeolite sample possesses some bigger agglomerates of 30 nm. Based on XRD data it is suggested that nanoparticles have core-shell structure and consist of Cu 0 core and Cu 2 O shell. Photocatalytic degradation of Congo Red solutions was carried out. Both catalysts were active in decolorization and can be used as effective photocatalysts, but Cu-alumina sample activity prevails under the Cu-zeolite ones. Its better performance supposed to be connected with better sample mesoporosity and higher part of nanoparticles of 2 nm dimension.
- 7 October 2026
- Published by Springer Nature in Research Square
Open AccessCongo red photocatalytic degradation on the copper nanoparticles deposited on carriers
Photocatalytic removal of dyes from aqueous solutions is an important process in the context of environmental protection due to synthetic dyes are common pollutants that are difficult to biodegrade and have negative impacts on ecosystems. The aim of the present work was to compare photocatalytical properties of copper nanoparticles deposited on two inorganic carriers: gamma alumina and natural cliniptilolite type zeolite. Copper-containing samples (4.5 wt. % of Cu) were obtained by impregnation of copper nitrate and its reduction with ascorbic acid. Catalysts were characterized by means of XRD, XRF, TEM, SEM, and low temperature nitrogen adsorption/desorption. The formation of nanoparticles was confirmed by TEM images. Particles predominant dimension for both samples was 2–3 nm. However, zeolite sample possesses some bigger agglomerates of 30 nm. Based on XRD data it is suggested that nanoparticles have core-shell structure and consist of Cu 0 core and Cu 2 O shell. Photocatalytic degradation of Congo Red solutions was carried out. Both catalysts were active in decolorization and can be used as effective photocatalysts, but Cu-alumina sample activity prevails under the Cu-zeolite ones. Its better performance supposed to be connected with better sample mesoporosity and higher part of nanoparticles of 2 nm dimension.
- 2 January 2026
- Published by Springer Nature
- p. 335-346
Hydroisomerization and Hydrocracking of Linear Alkanes on MFI Zeolite with Nickel Nanoparticles
- 2 January 2026
- Published by Springer Nature
- p. 335-346
Hydroisomerization and Hydrocracking of Linear Alkanes on MFI Zeolite with Nickel Nanoparticles
- Open Access
- 3 November 2025
- Published by Springer Nature in Research Square
Degradation of Congo Red dye on zeolite
The toxicity of a number of dyes, which are common pollutants of natural and wastewater, determines the high importance of their removal by accessible and effective methods. The aim of this work was to study the photodegradation of Congo red solution on modified Ag-containing natural clinoptilolite and gamma-alumina. The porous structure of clinoptilolite was developed by using dealumination with ethylenediaminetetraacetic acid. Utilizing silver nitrate impregnation and its reduction with glucose the silver particles were deposited on the samples. TEM studies confirmed the formation of nanosized silver particles on the surface of both samples. Photocatalytic dye conversion tests showed that the natural zeolite modified with nanosilver (1 wt. %) demonstrates significant photocatalytic activity, which is only slightly inferior to the activity of silver-containing alumina.
- 3 November 2025
- Published by Springer Nature in Research Square
Open AccessDegradation of Congo Red dye on zeolite
The toxicity of a number of dyes, which are common pollutants of natural and wastewater, determines the high importance of their removal by accessible and effective methods. The aim of this work was to study the photodegradation of Congo red solution on modified Ag-containing natural clinoptilolite and gamma-alumina. The porous structure of clinoptilolite was developed by using dealumination with ethylenediaminetetraacetic acid. Utilizing silver nitrate impregnation and its reduction with glucose the silver particles were deposited on the samples. TEM studies confirmed the formation of nanosized silver particles on the surface of both samples. Photocatalytic dye conversion tests showed that the natural zeolite modified with nanosilver (1 wt. %) demonstrates significant photocatalytic activity, which is only slightly inferior to the activity of silver-containing alumina.
- Open Access
- 1 January 2025
- Published by National Academy of Sciences of Ukraine (Co. LTD Ukrinformnauka) (Publications) in Catalysis and Petrochemistry
- No. 36,p. 33-43
Conversion of glucose into 5-hydroxymethylfurfural on Ukrainian natural zeolites
An important product of biomass carbohydrate conversion is 5-hydroxymethylfurfural as a potential raw material component of a wide range of important chemicals. The aim of the work was to study the conversion of glucose into 5-hydroxymethylfurfural in the presence of modified clinoptilolite and mordenite-clinoptilolite zeolite rocks from Transcarpathia. A number of acid catalysts have been synthesized by liquid-phase ion exchange of native cations with calcium, lanthanum, and ammonium cations, as well as by dealumination with hydrochloric and ethylenediaminetetraacetic acid. Their properties were characterized using XRD and XRF analysis, low-temperature nitrogen adsorption/desorption, and FTIR spectroscopy. The acidity of the samples was determined by reverse n-butylamine titration. Acid treatment of the samples contributed to an increase in the specific surface area of the samples by an order of magnitude. The samples were tested in the conversion of 9% aqueous glucose solution into 5-hydroxymethylfurfural. The composition of the reaction products was analyzed by gas chromatography. The glucose conversions and the yields of 5-hydroxymethylfurfural, levulinic acid, and fructose were calculated. The glucose conversions ranged from 30 to 70 %. The results were analyzed in accordance with the characteristics of the nature of the active sites of the catalysts and the porous structure of the latter. It was found that the samples with the presence of Lewis acid sites in the form of extra-framework aluminum and multiply charged cations are characterized by the highest 5-hydroxymethylfurfural yields. Due to glucose conversion occurs mainly on the outer surface of zeolite crystals and at the entrances to the cavities, the polycationic form of clinoptilolite, despite its low porous characteristics, demonstrates the highest yield of 5-hydroxymethylfurfural.
- 1 January 2025
- Published by National Academy of Sciences of Ukraine (Co. LTD Ukrinformnauka) (Publications) in Catalysis and Petrochemistry
- No. 36,p. 33-43
Open AccessConversion of glucose into 5-hydroxymethylfurfural on Ukrainian natural zeolites
An important product of biomass carbohydrate conversion is 5-hydroxymethylfurfural as a potential raw material component of a wide range of important chemicals. The aim of the work was to study the conversion of glucose into 5-hydroxymethylfurfural in the presence of modified clinoptilolite and mordenite-clinoptilolite zeolite rocks from Transcarpathia. A number of acid catalysts have been synthesized by liquid-phase ion exchange of native cations with calcium, lanthanum, and ammonium cations, as well as by dealumination with hydrochloric and ethylenediaminetetraacetic acid. Their properties were characterized using XRD and XRF analysis, low-temperature nitrogen adsorption/desorption, and FTIR spectroscopy. The acidity of the samples was determined by reverse n-butylamine titration. Acid treatment of the samples contributed to an increase in the specific surface area of the samples by an order of magnitude. The samples were tested in the conversion of 9% aqueous glucose solution into 5-hydroxymethylfurfural. The composition of the reaction products was analyzed by gas chromatography. The glucose conversions and the yields of 5-hydroxymethylfurfural, levulinic acid, and fructose were calculated. The glucose conversions ranged from 30 to 70 %. The results were analyzed in accordance with the characteristics of the nature of the active sites of the catalysts and the porous structure of the latter. It was found that the samples with the presence of Lewis acid sites in the form of extra-framework aluminum and multiply charged cations are characterized by the highest 5-hydroxymethylfurfural yields. Due to glucose conversion occurs mainly on the outer surface of zeolite crystals and at the entrances to the cavities, the polycationic form of clinoptilolite, despite its low porous characteristics, demonstrates the highest yield of 5-hydroxymethylfurfural.
- Open Access
- 1 December 2024
- Published by Moldova State University in Chemistry Journal of Moldova
- Vol. 19 (2) , 63-73
Fatty acid ethyl esters as biodiesel fuel: product quality and efficiency of various purification techniques
The efficiency of removal of glycerol, soaps, and unconverted acylglycerols by repeated washing with water, alcohol removal by distillation, distillation of esters, and using of sorbents, as well as a combination of these techniques, was evaluated. The use of a number of commercially available sorbents (Magnesol, talc, and coal) and ion exchange resins (KU-2-8, Purolite СТ275) was investigated. Glycerol and soap were found to be effectively removed with all tested materials except talc, while Magnesol and Purolite also effectively removed monoacylglycerols. However, none of the materials tested was able to withdraw diacylglycerols. A three-stage purification of esters was proposed. The latter includes the alcohol removal by distillation, which contributes to the additional settling of pollutants, vacuum distillation, and final use of sorbents (Purolite). The utilization of the indicated stages allows obtaining a product that meets the quality indicators of EN 14214. The proposed approaches will be valuable in the engineering of industrial technology for obtaining fuel-grade ethyl esters.
- 1 December 2024
- Published by Moldova State University in Chemistry Journal of Moldova
- Vol. 19 (2) , 63-73
Open AccessFatty acid ethyl esters as biodiesel fuel: product quality and efficiency of various purification techniques
The efficiency of removal of glycerol, soaps, and unconverted acylglycerols by repeated washing with water, alcohol removal by distillation, distillation of esters, and using of sorbents, as well as a combination of these techniques, was evaluated. The use of a number of commercially available sorbents (Magnesol, talc, and coal) and ion exchange resins (KU-2-8, Purolite СТ275) was investigated. Glycerol and soap were found to be effectively removed with all tested materials except talc, while Magnesol and Purolite also effectively removed monoacylglycerols. However, none of the materials tested was able to withdraw diacylglycerols. A three-stage purification of esters was proposed. The latter includes the alcohol removal by distillation, which contributes to the additional settling of pollutants, vacuum distillation, and final use of sorbents (Purolite). The utilization of the indicated stages allows obtaining a product that meets the quality indicators of EN 14214. The proposed approaches will be valuable in the engineering of industrial technology for obtaining fuel-grade ethyl esters.
- Open Access
- 8 May 2024
- Published by Springer Nature in Research Square
Ni/Pd-containing pentasils in n-hexane micropulse hydrocracking and aromatization
Monometallic palladium- and nickel-containing as well as bimetallic MFI-type zeolites with metal content of 1 wt % were synthesized. Samples were characterized by using low temperature nitrogen adsorption/desorption, FTIR, and TEM. It is stated that at 400–500 оС on the investigated samples the cracking of linear hexane occurs, but on the palladium-containing sample the aromatization function is partly appeared.
- 8 May 2024
- Published by Springer Nature in Research Square
Open AccessNi/Pd-containing pentasils in n-hexane micropulse hydrocracking and aromatization
Monometallic palladium- and nickel-containing as well as bimetallic MFI-type zeolites with metal content of 1 wt % were synthesized. Samples were characterized by using low temperature nitrogen adsorption/desorption, FTIR, and TEM. It is stated that at 400–500 оС on the investigated samples the cracking of linear hexane occurs, but on the palladium-containing sample the aromatization function is partly appeared.
- 12 March 2024
- Published by Springer Nature in Journal of Porous Materials
- Vol. 31 (3) , 1029-1041
Metal-containing zeolite composites with separated phases as catalysts for hydroisomerization of linear hexane
- 12 March 2024
- Published by Springer Nature in Journal of Porous Materials
- Vol. 31 (3) , 1029-1041
Metal-containing zeolite composites with separated phases as catalysts for hydroisomerization of linear hexane
- 20 March 2023
- Published by Springer Nature in Applied Nanoscience
- Vol. 13 (8) , 5743-5754
Polycationic nanostructured faujasite zeolite catalysts for glucose transformation into 5-hydroxymethylfurfural
- 20 March 2023
- Published by Springer Nature in Applied Nanoscience
- Vol. 13 (8) , 5743-5754
Polycationic nanostructured faujasite zeolite catalysts for glucose transformation into 5-hydroxymethylfurfural
- Open Access
- 12 December 2022
- Published by Igor Sikorsky Kyiv Polytechnic Institute in WATER AND WATER PURIFICATION TECHNOLOGIES. SCIENTIFIC AND TECHNICAL NEWS
- Vol. 33 (2) , 25-31
PREPARATION OF SILVER-CONTAINING NATURAL ZEOLITES WITH IMPROVED POROUS CHARACTERISTICS AS SORBENTS FOR WATER PURIFICATION
The widespread application of Ukrainian natural zeolites in sorption and catalysis is limited by the shortcomings of their porous structure. Chemical modification of zeolites permits significant changes in their properties. The purpose of this work was to obtain silver-containing natural zeolites of the clinoptilolite type with improved porous characteristics by acid treatment and to study their antibacterial properties. Mild dealumination of the rock was carried out using ethylenediaminetetraacetic acid for 15 hours at 90 °C, which significantly increased the specific surface area of the clinoptilolite sample to 90 m2/g, and the volume of micropores to 0.037 cm3/g, determined by low-temperature nitrogen adsorption/desorption. An establishment of a change in the chemical composition of the sample during processing by X-ray fluorescence analysis was made. Additional modification with silver in the amount of 1 wt % was carried out by impregnation with a solution of silver nitrate. The water of three lakes in Kyiv was studied for the total viable count by means of sowing in nutrient agar. The results were analyzed and a sample of water was selected to evaluate the effectiveness of the synthesized sorbent. The antibacterial properties of zeolite were confirmed with the worst of the water samples, the quality of which, in terms of the total viable count, was improved not only to the norms of surface water but also to the indicators for drinking water.
- 12 December 2022
- Published by Igor Sikorsky Kyiv Polytechnic Institute in WATER AND WATER PURIFICATION TECHNOLOGIES. SCIENTIFIC AND TECHNICAL NEWS
- Vol. 33 (2) , 25-31
Open AccessPREPARATION OF SILVER-CONTAINING NATURAL ZEOLITES WITH IMPROVED POROUS CHARACTERISTICS AS SORBENTS FOR WATER PURIFICATION
The widespread application of Ukrainian natural zeolites in sorption and catalysis is limited by the shortcomings of their porous structure. Chemical modification of zeolites permits significant changes in their properties. The purpose of this work was to obtain silver-containing natural zeolites of the clinoptilolite type with improved porous characteristics by acid treatment and to study their antibacterial properties. Mild dealumination of the rock was carried out using ethylenediaminetetraacetic acid for 15 hours at 90 °C, which significantly increased the specific surface area of the clinoptilolite sample to 90 m2/g, and the volume of micropores to 0.037 cm3/g, determined by low-temperature nitrogen adsorption/desorption. An establishment of a change in the chemical composition of the sample during processing by X-ray fluorescence analysis was made. Additional modification with silver in the amount of 1 wt % was carried out by impregnation with a solution of silver nitrate. The water of three lakes in Kyiv was studied for the total viable count by means of sowing in nutrient agar. The results were analyzed and a sample of water was selected to evaluate the effectiveness of the synthesized sorbent. The antibacterial properties of zeolite were confirmed with the worst of the water samples, the quality of which, in terms of the total viable count, was improved not only to the norms of surface water but also to the indicators for drinking water.