YVYuliya G. Voloshyna

Yuliya G. Voloshyna

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Yuliya G. Voloshyna has a total of 53 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Sulfonated nanoscale graphite as a catalyst for the alcoholysis of cellulose to ethyl levulinate

    by O. Pertko, Yu. Voloshyna, T. Tkachenko, D. Kamenskyh, V. Yevdokymenko, V. Povazhnyi

    This study investigates the critical role of carbon catalyst surface architecture in the direct ("onepot") ethanolysis of microcrystalline cellulose to ethyl levulinate. Three sulfonated carbon matrices were synthesized and evaluated: pristine graphite, nanostructured mesoporous graphite obtained via thermal exfoliation, and amorphous micro/mesoporous hemp hurd-derived biochar. The materials were characterized using XRD, SEM, and nitrogen adsorption-desorption, while the density of grafted -SO3H groups was quantified via Boehm titration. Catalytic testing revealed that the efficiency of the solid-solid system is primarily governed by the surface morphology and pore size rather than the amount of -SO3H group. The pristine graphite sample exhibited the lowest ethyl levulinate yield due to its dense, non-porous structure, which minimizes the effective reactant contact area. Despite possessing a specific surface area comparable to nanostructured graphite, the amorphous biochar showed poor activity because its narrow micropores physically restrict the diffusion of bulky cellulose macromolecules. In contrast, the nanostructured graphite demonstrated the highest catalytic activity (achieving at a 20 mg/mL cellulose-to-ethanol ratio a maximum yield of ~15% in comparison with 1% and 2.4% for the graphite and biochar samples, respectively). Its exfoliated, mesoporous network successfully overcomes diffusion limitations, providing unhindered access of the solid substrate to the active acid sites. These findings demonstrate that the nanostructuring of crystalline graphite is a highly effective strategy for designing efficient solid acid catalysts for biomass valorization.

  • Hydroisomerization and Hydrocracking of Linear Alkanes on MFI Zeolite with Nickel Nanoparticles

    by Lyubov Patrylak, Yuliya Voloshyna, Olexandra Pertko, Angela Yakovenko, Olexandr Melnychuk

  • Open Access

    Surfactant-modified Transcarpathian natural zeolite as a sorbent of organic dyes from aqueous solutions

    by Yuliya Voloshyna, Oleksandra Pertko, Angela Yakovenko

    In the present work, natural zeolite from the Lipcha deposit were modified with surfactants of different nature (CTMA-Br and SDS). Some samples of zeolites were dealuminated before modification for the secondary porosity development. Low-temperature nitrogen adsorption/desorption, FTIR spectroscopy, inductively coupled plasma optical emission spectroscopy, chemical analysis, and spectrophotometry were used to study the physicochemical properties of the obtained sorbents and estimate their efficiency in sorption of model substances – cationic and anionic organic dyes, methylene blue and methyl orange. It has been shown that during dye sorption, the applied surfactant layer is preserved. The results of the work showed that natural zeolite from the Lipcha deposit, modified with surfactants, can be used for dye sorption, while the dealumination of zeolite prior the modification to improve porosity negatively affects the sorption of dyes. It was also found that modification with surfactants accelerates the sorption of both methylene blue and methyl orange at the initial stage of the sorption process.

  • Open Access

    Conversion of glucose into 5-hydroxymethylfurfural on Ukrainian natural zeolites

    by Lyubov K. Patrylak, Serhiy V. Konovalov, Stepan O. Zubenko, Anzhela V. Yakovenko, Yuliya G. Voloshyna, Olexandra P. Pertko

    An important product of biomass carbohydrate conversion is 5-hydroxymethylfurfural as a potential raw material component of a wide range of important chemicals. The aim of the work was to study the conversion of glucose into 5-hydroxymethylfurfural in the presence of modified clinoptilolite and mordenite-clinoptilolite zeolite rocks from Transcarpathia. A number of acid catalysts have been synthesized by liquid-phase ion exchange of native cations with calcium, lanthanum, and ammonium cations, as well as by dealumination with hydrochloric and ethylenediaminetetraacetic acid. Their properties were characterized using XRD and XRF analysis, low-temperature nitrogen adsorption/desorption, and FTIR spectroscopy. The acidity of the samples was determined by reverse n-butylamine titration. Acid treatment of the samples contributed to an increase in the specific surface area of the samples by an order of magnitude. The samples were tested in the conversion of 9% aqueous glucose solution into 5-hydroxymethylfurfural. The composition of the reaction products was analyzed by gas chromatography. The glucose conversions and the yields of 5-hydroxymethylfurfural, levulinic acid, and fructose were calculated. The glucose conversions ranged from 30 to 70 %. The results were analyzed in accordance with the characteristics of the nature of the active sites of the catalysts and the porous structure of the latter. It was found that the samples with the presence of Lewis acid sites in the form of extra-framework aluminum and multiply charged cations are characterized by the highest 5-hydroxymethylfurfural yields. Due to glucose conversion occurs mainly on the outer surface of zeolite crystals and at the entrances to the cavities, the polycationic form of clinoptilolite, despite its low porous characteristics, demonstrates the highest yield of 5-hydroxymethylfurfural.

  • Open Access

    Oxidative CO2 dehydrogenation of butane on microspherical zeolite-containing composites based on kaolin

    by Olexandra Pertko, Yuliya Voloshyna, Lyubov Patrylak, Angela Yakovenko

    In the present work, zeolite-containing microspherical composites based on kaolin were synthesized and modified with ammonium, lanthanum, and zirconium compounds. The modified composites were dealuminated by thermal steaming. The physicochemical properties of the obtained materials were studied using low-temperature nitrogen adsorption/desorption, FTIR spectroscopy and thermally programmed ammonia desorption. Samples of the microspherical composites of different composition were tested in the reaction of oxidative dehydrogenation of butane with the participation of CO2. The effect of a number of factors on the characteristics of the synthesized samples and the related changes in their activity and selectivity was analyzed. The results of the work showed the possibility of using zeolite-containing microspherical composites modified with La or Zr as catalysts for this reaction.

  • Open Access

    Ni/Pd-containing pentasils in n-hexane micropulse hydrocracking and aromatization

    by A. Yakovenko, L. Patrylak, Yu. Voloshyna, O. Pertko, V. Povazhnyi

    Monometallic palladium- and nickel-containing as well as bimetallic MFI-type zeolites with metal content of 1 wt % were synthesized. Samples were characterized by using low temperature nitrogen adsorption/desorption, FTIR, and TEM. It is stated that at 400–500 оС on the investigated samples the cracking of linear hexane occurs, but on the palladium-containing sample the aromatization function is partly appeared.

  • Metal-containing zeolite composites with separated phases as catalysts for hydroisomerization of linear hexane

    by Yuliya G. Voloshyna, Olexandra P. Pertko, Angela V. Yakovenko, Volodymyr A. Povazhnyi, Lyubov K. Patrylak


  • Open Access

    Metal-containing zeolite composites with separated phases as catalysts for hydroisomerization of linear hexane

    by Yuliya G. Voloshyna, Olexandra P. Pertko, Angela V. Yakovenko, Volodymyr A. Povazhnyi, Lyubov K. Patrylak

    In this work, composite catalytic systems of natural mordenite and synthetic MFI-type zeolite containing Pd and Ni nanoparticles (0.5–1.5% by weight in total) were prepared by mechanical mixing (1:1), optionally with the addition of α- or γ-Al2O3 as a binder. The samples were examined using IR spectroscopy, X-ray diffractometry, transmission electron microscopy, low-temperature nitrogen ad(de)sorption, and tested in the model reaction of n-hexane hydroisomerization in a micro-pulse mode to determine the effect of composition on the peculiarities of linear alkane transformation. It has been shown that in the obtained catalytic systems, modifications of aluminum oxide used as a binder affect the effectiveness of catalysts in the conversion of n-hexane. This is explained by the different dispersity of α- and γ-Al2O3 particles, which causes different porosity of the result composites, and possibly by the interaction of zeolite acid sites with binder acid sites, which leads to changes in their characteristics depending on the modification of aluminum oxide. In this respect, α-Al2O3 proved to be better than γ-Al2O3. Synergy between the two zeolite components in the formation of isomers has been found out, which was more effective in samples with an isotropic distribution of zeolite phases. In the applied micro-pulse reaction mode, the composite catalyst prepared without a binder was the best, showing a significantly lower temperature of the maximum yield of isomerization products and a high yield of dimethyl-branched isomers, and having selectivity for n-hexane isomers at the level of high selectivity of the Pd-containing component.