IPIvan Zoran Petric

Ivan Zoran Petric

*This is an algorithmically generated author record based on publicly available information.

Ivan Zoran Petric has a total of 22 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Optimal Closed-Loop Control of Dual-Active Bridge Type DC-DC and Single-Stage DC-AC Converters With Multiple Degrees-of-Freedom

    by Ivan Z. Petrić, Rahul Mallik, Milan Ilić

    This paper introduces a method for optimal closed-loop control of DAB-type DC-DC and single-stage high-frequency link DC-AC converters with multiple degrees-of-freedom (DoF). The proposed single-input multiple-output (SIMO) architecture distributes the control effort among the DoF based on the gradient of the regulated output. This minimally perturbs the control input vector, thus reducing the jump discontinuities in the control variables and suppressing transient oscillations. Additionally, the SIMO control normalizes the loop gain to impose constant dynamics throughout the operating range. Finally, a saturation-handling algorithm is proposed to retain optimal distribution even if a control variable is saturated, allowing full controllability and constant small-signal dynamics as long as at least one DoF remains. A small-signal model is derived and validated in simulations. Experimental validations are presented on an 850 W series-resonant DAB prototype that is re-configurable for DC-DC and DC-AC operation.

  • Open Access

    Optimal Interleaving of Decentralized Series-Stacked Converters via Extremum-Seeking Control

    by Ivan Petric, Seunghoon Baek, Milan Ilić, Dragan Maksimović

    This paper introduces a fully decentralized solution for achieving optimal interleaving of series-stacked power converters based on distributed, module-level extremum-seeking controllers. The proposed approach ensures switching-cyclelevel synchronization without any inter-module communication, effectively minimizing current ripple and substantially reducing the required size of passive filters. The proposed control system is simple to design and implement, and offers continuous synchronization to mitigate clock drifts among module controllers, while also supporting asymmetric module operation. To guide system design, dynamic modeling is presented, and small-signal validations are performed in simulations. The proposed solution is experimentally validated on a system with up to six modules, highlighting its effectiveness for balanced and unbalanced DC-DC and DC-AC operation, and its capability to seamlessly ridethrough a module failure.

  • Generalized Averaged Modeling of Capacitor Voltage Balancing Dynamics in Flying Capacitor Multilevel Converters

    by Rahul K. Iyer, Roderick S. Bayliss, Ivan Z. Petric, Seth R. Sanders, Robert C. N. Pilawa-Podgurski

    This work presents a generalized averaged (dynamic phasor) model for capacitor voltage dynamics in the flying capacitor multilevel converter. The “natural balancing” dynamics of capacitor voltages under symmetric phase-shifted pulsewidth modulation are derived and verified against time-domain simulations. The model is simplified to a reduced-order form using singular perturbation theory, and modal analysis techniques are developed to identify the minimum model complexity for a given design and operating point. A small-signal equivalent of the reduced-order model is subsequently developed to characterize known light-load instabilities in systems using closed-loop “active balancing” control. Results obtained from the model for natural and active balancing scenarios are compared to experimental characterization of a hardware prototype.


  • Modeling and Decoupled Control of the Three-Level Interleaved DC–DC Converter With Coupled Inductors

    by Ivan Z. Petrić

    For emerging high power dc–dc applications, such as those in power-to-x and energy storage systems, the three-level interleaved converter with coupled inductors offers several advantages, such as increased voltage and current ratings and a strong reduction of the output current ripple. However, due to series and parallel connections of the switching cells, voltage imbalance and circulating currents may appear, which is why their active suppression is necessary. This article presents small-signal modeling and control design of the three-level interleaved converter with coupled inductors, focusing on the coupling between the duty cycles of the switching cells and the state variables. Transformations of state variables and control inputs are proposed to diagonalize the system and facilitate decoupled closed-loop control. Digital control implementation is analyzed, focusing on modulation and oversampled filtering of the inductor currents used to suppress aliasing and feedback noise. The experimental verifications are performed on the three-level two-phase interleaved buck prototype, for powers up to 100 kW.


  • All-Port Unterminated Admittance Passivity for Robust Stability of AC-DC Interlinking Converters

    by Ružica Cvetanović, Ivan Z. Petrić, Paolo Mattavelli, Simone Buso

    This article presents the all-port unterminated admittance passivity criterion and establishes a termination independent robust stability-oriented controller design framework for ac-dc converters with $dq$ frame representation of ac ports. In addition to the passivity properties of the converter's dc and ac ports' unterminated self admittances, the coupling passivity properties are examined, which account for the possible destabilizing impact of port coupling. It is explained how, to ensure stability, the converter's control system should be designed so that all passivity properties are non-negative in the frequency range critical for stability. The proposed methodology is exemplified for a three-phase current-controlled voltage source inverter. As examples of stabilizing control strategies, multisampled pulse-width modulation and active damping impedance-emulation are shown to be capable of rendering all passivity properties non-negative at high frequencies. It is demonstrated that this prevents the converter's destabilizing interactions with the grid. Validations are performed both in frequency and time domains, using a laboratory prototype.


  • Open Access

    All-Port MIMO Admittance Passivity for Robust Stability of DC–DC Interlinking Converters

    by Ružica Cvetanović, Ivan Z. Petrić, Paolo Mattavelli, Simone Buso

    This article explores the passivity properties of a dc–dc converter's unterminated all-port MIMO admittance matrix, for analyzing and preventing the converter's destabilizing impact in grid-connecting (interlinking) scenarios with an arbitrary, even meshed, termination (grid impedance). In addition to the passivity properties of the converter's unterminated input and output self admittances, the coupling passivity property is examined, which accounts for the possible destabilizing impact of port-coupling. The dependence of these properties on the control loop parameters is exemplified using a current-controlled buck converter. Examples of two techniques for enhancing a converter's all-port MIMO admittance passivity, by active damping impedance emulation and multisampled pulse width modulation, are examined and shown to be effective. The proposed methodology is validated both in frequency and time domain, using control hardware-in-the-loop simulations, as well as experimentally, using a laboratory prototype.


  • A High-Bandwidth Parallel Active Balancing Controller for Current-Controlled Flying Capacitor Multilevel Converters

    by Rahul K. Iyer, Ivan Z. Petric, Roderick S. Bayliss, Nathan C. Brooks, Robert C. N. Pilawa-Podgurski

    This work presents a capacitor voltage balancing controller for current-controlled flying capacitor multilevel converters. A small-signal model of the converter derived from state–space averaging informs the parallel controller structure. The proposed controller incorporates nonlinear actions to decouple flying capacitor control loops and prevent adverse interaction between the capacitor voltage balancing and inductor current controllers. Experimental results of closed-loop line and load transient responses demonstrate significant performance improvements with the proposed balancing architecture compared to a converter relying on natural capacitor balancing. These improvements are quantified with experimental measurements of switch voltage stress and load current disturbance as a response to line voltage perturbations at different frequencies. Limits to control bandwidths in balancing controllers based on averaged models are discussed. The closed-loop stability of the converter operating with the proposed active balancing architecture is discussed as a function of the operating point, controller gains, and hardware parameters, such as output filter inductance and inductor current ripple.


  • Open Access

    On the Applicability of SISO and MIMO Impedance-Based Stability Assessment of DC–DC Interlinking Converters

    by Ružica Cvetanović, Ivan Z. Petrić, Paolo Mattavelli, Simone Buso

    This article presents a formal mathematical correlation between the standardly used port-level (terminated) single-input single-output (SISO), and the recently acknowledged device-level (unterminated) multiple-input multiple-output (MIMO) impedance-based method for the stability assessment of dc–dc interlinking converters. Based on this, the conditions that must be met to ensure the correct stability assessment by the SISO method applied to a single port-pair are derived. It is shown that without prior knowledge on whether these conditions are met, the SISO method must be applied to every port-pair to account for possible port-level hidden dynamics . Alternatively, the MIMO method can be used, which is revealed to inherently account for any port-level hidden dynamics . It is further analyzed which method is advantageous in terms of computational complexity, intuitiveness, and simplicity for applications featuring meshed grids or multiport interlinking converters, as well as in terms of interpreting the resulting stability margins. Finally, suitability of the MIMO method for termination-independent stability-oriented controller design and stability assessment based on measurements is highlighted. The presented methodology is illustrated for a simplified dc system with a current-controlled buck converter. Analytical stability predictions are validated using hardware-in-the-loop simulations and also experimentally, using a laboratory hardware prototype.


  • Open Access

    Nonlinearities of Multisampled Phase-Shifted PWM in Unbalanced Multicell Converters

    by Ruzica Cvetanovic, Ivan Z. Petric, Paolo Mattavelli, Simone Buso

    This article reveals, analyzes and proposes the method to mitigate nonlinear effects of multi-sampled multi-update (MSMU) digital phase-shifted pulsewidth modulators (PS-DPWM) that appear in unbalanced multi-cell voltage-source converters (MC-VSCs). For balanced MC-VSCs, the harmonic cancellation of PS-DPWM allows for an increase in the sampling frequency, ensuring that the average current is acquired at the peaks, valleys, and intersections of all triangular carriers. For unbalanced operation, which is typically encountered in practice, e.g., due to cell voltage mismatch in multilevel MC-VSCs and inductance mismatch in interleaved MC-VSCs, harmonic cancellation of PS-DPWM is compromised and, thus, the increased sampling frequency brings switching ripple in the feedback signal. Since in MSMU control the modulating signal is also updated at peaks, valleys, and intersections of all carriers, this may cause vertical intersections between the modulating signal and the carriers, resulting in specific nonlinear effects. The nonlinearities are shown to introduce limit-cycle oscillations and output waveform distortion. A method to prevent such detrimental impact of MSMU-PS-PWM is also proposed. A simple analytical procedure is proposed to quantify the analyzed non-linear effects, revealing that they are more emphasized for higher levels of imbalance and control bandwidth. Moreover, the modulator nonlinearity is shown to decrease as the number of cells increases. The analyses are verified in simulations and experiments, using laboratory prototypes of three- and four-level MC-VSCs.