Shuyang Yang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Shuyang Yang has a total of 17 co-authors. Here are the top co-authors by number of shared publications:
- Xi Li
National Key Laboratory of Antennas and Microwave Technology, Xidian University, Xi’an 710071, China
8 shared publications - Zehong Yan
National Key Laboratory of Antenna and Microwave Technology, Xidian University, Xian, China
8 shared publications - Mingbo Cai
National Key Laboratory of Antennas and Microwave Technology, xidian university, Xian, China
7 shared publications - Fangfang Fan
National Key Laboratory of Antenna and Microwave Technology, Xidian University, Xian, China
5 shared publications - Tianling Zhang
National Key Laboratory of Radar Detection and Sensing, Xidian University, Xi’an 710071, China
4 shared publications - Lin Yang
National Key Laboratory of Antennas and Microwave Technology, Xidian University, Xi’an 710071, China
2 shared publications
Latest Publications
- 30 August 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 22 (1) , 89-93
Reflect–Transmit-Array Antenna With Independent Dual Circularly Polarized Beam Control
In this letter, we propose a dual-circularly polarized reflect-transmit-array antenna (RTA) with independent beam control. It can transmit left-hand circularly polarized (LHCP) wave as transmitarray antenna and reflect right-hand circularly polarized (RHCP) wave as reflectarray antenna at 8.7–10.2 GHz. In addition, 360° phase shift for each circularly polarized wave can be achieved by rotating the top and bottom patches. A 20 × 20- unit cell RTA is designed, fabricated, and measured. For the LHCP radiation, the measured results show that the 3 dB gain bandwidth and axial ratio (AR) bandwidth are 13.7% (8.8–10.1 GHz) and 15.9% (8.7–10.2 GHz), respectively. For the RHCP radiation, the measured 3 dB gain bandwidth and AR bandwidth are 11.4% (9.1–10.2 GHz) and 12.6% (8.9–10.1 GHz). The peak aperture efficiencies for LHCP and RHCP radiations are 45.5% at 9.2 GHz and 41.8% at 9.6 GHz, respectively.
- 30 August 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 22 (1) , 89-93
Reflect–Transmit-Array Antenna With Independent Dual Circularly Polarized Beam Control
In this letter, we propose a dual-circularly polarized reflect-transmit-array antenna (RTA) with independent beam control. It can transmit left-hand circularly polarized (LHCP) wave as transmitarray antenna and reflect right-hand circularly polarized (RHCP) wave as reflectarray antenna at 8.7–10.2 GHz. In addition, 360° phase shift for each circularly polarized wave can be achieved by rotating the top and bottom patches. A 20 × 20- unit cell RTA is designed, fabricated, and measured. For the LHCP radiation, the measured results show that the 3 dB gain bandwidth and axial ratio (AR) bandwidth are 13.7% (8.8–10.1 GHz) and 15.9% (8.7–10.2 GHz), respectively. For the RHCP radiation, the measured 3 dB gain bandwidth and AR bandwidth are 11.4% (9.1–10.2 GHz) and 12.6% (8.9–10.1 GHz). The peak aperture efficiencies for LHCP and RHCP radiations are 45.5% at 9.2 GHz and 41.8% at 9.6 GHz, respectively.
- 3 May 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 21 (7) , 1497-1501
A Linearly-Polarized-Feed Dual-Circularly Polarized Dual-Beam Transmitarray With Independent Beam Control
A method for designing linearly-polarized-feed dual-circularly polarized dual-beam transmitarray (TA) is presented in this letter. According to a theory, a linearly polarized (LP) wave can be decomposed into left-handed and right-handed circularly polarized (LHCP and RHCP) waves. The LHCP and RHCP phase can be compensated independently and simultaneously by adjusting the initial and rotation phases of the element so that the LHCP and RHCP beams of the TA can appear simultaneously in space and can be controlled independently. The designed receiver-transmitter element is used to achieve the above functions, and the TA is fabricated and measured. Simulated results are consistent with experimental results.
- 3 May 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 21 (7) , 1497-1501
A Linearly-Polarized-Feed Dual-Circularly Polarized Dual-Beam Transmitarray With Independent Beam Control
A method for designing linearly-polarized-feed dual-circularly polarized dual-beam transmitarray (TA) is presented in this letter. According to a theory, a linearly polarized (LP) wave can be decomposed into left-handed and right-handed circularly polarized (LHCP and RHCP) waves. The LHCP and RHCP phase can be compensated independently and simultaneously by adjusting the initial and rotation phases of the element so that the LHCP and RHCP beams of the TA can appear simultaneously in space and can be controlled independently. The designed receiver-transmitter element is used to achieve the above functions, and the TA is fabricated and measured. Simulated results are consistent with experimental results.
- 13 April 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 70 (9) , 8051-8058
Ultra-Wideband Full-Metal Planar Array Antenna With a Combination of Ridge Gap Waveguide and E-Plane Groove Gap Waveguide
An ultrawideband (UWB) full-metal planar array antenna based on a combination of ridge gap waveguide (RGW) and E-plane groove gap waveguide (E-GGW) is presented for millimeter-wave (mmWave) applications. First, the radiation element of a double-step double-ridged slot structure is proposed and designed. By removing the vertical walls of the cavity in the H-plane, the impedance matching characteristics presents a UWB bandwidth of 53%. Second, a UWB double-layer feeding network is achieved by combining RGWs and double-side-pin E-GGWs for the radiation elements. Finally, an 8$\times $ 8 full-metal planar array antenna with the presented elements and network is designed, prototyped, and measured. The measured results agree well with the simulated results. The proposed antenna provides an impedance matching bandwidth ($\vert \text{S}_{11}\vert < -10$ dB) of 46.8% from 18.8 to 30.3 GHz. The maximum gain is 27.7 dBi at 27 GHz and a stable gain of 26$\pm ~1.7$ dBi is obtained over the operation band.- 13 April 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 70 (9) , 8051-8058
Ultra-Wideband Full-Metal Planar Array Antenna With a Combination of Ridge Gap Waveguide and E-Plane Groove Gap Waveguide
An ultrawideband (UWB) full-metal planar array antenna based on a combination of ridge gap waveguide (RGW) and E-plane groove gap waveguide (E-GGW) is presented for millimeter-wave (mmWave) applications. First, the radiation element of a double-step double-ridged slot structure is proposed and designed. By removing the vertical walls of the cavity in the H-plane, the impedance matching characteristics presents a UWB bandwidth of 53%. Second, a UWB double-layer feeding network is achieved by combining RGWs and double-side-pin E-GGWs for the radiation elements. Finally, an 8$\times $ 8 full-metal planar array antenna with the presented elements and network is designed, prototyped, and measured. The measured results agree well with the simulated results. The proposed antenna provides an impedance matching bandwidth ($\vert \text{S}_{11}\vert < -10$ dB) of 46.8% from 18.8 to 30.3 GHz. The maximum gain is 27.7 dBi at 27 GHz and a stable gain of 26$\pm ~1.7$ dBi is obtained over the operation band.- 11 January 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 70 (7) , 5983-5988
Low-Profile Dual-Band Circularly Polarized Antenna Combining Transmitarray and Reflectarray for Satellite Communications
This communication proposes a low-profile dual-band circularly polarized (CP) antenna for satellite communication at K and Ka-bands. The antenna consists of a folded transmitarray (TA) operating at 20 GHz and a multi-feed reflectarray (RA) operating at 30 GHz. The dual split rings are used as the TA and RA elements. The TA is placed above the RA. The TA acts as the phase-controlling surface at 20 GHz and does not affect the transmission of plane waves at 30 GHz generated by the RA. The RA simultaneously serves as the phase-controlling surface at 30 GHz and as the ground for the folded TA at 20 GHz. Owing to the combination of the folded TA and multi-feed RA with a small focal length-to-diameter ratio, the antenna profile is reduced, and the height-to-diameter ratio is only 0.4. Compared with the traditional horn feed system, the CP patch arrays integrated on the TA surface are used as the feeds in this design. The orthomode transducer (OMT) and circular polarizer are not needed, which significantly saves space and cost. The antenna was manufactured and measured to verify its performance. The measured results keep good consistent with the simulated results.
- 11 January 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 70 (7) , 5983-5988
Low-Profile Dual-Band Circularly Polarized Antenna Combining Transmitarray and Reflectarray for Satellite Communications
This communication proposes a low-profile dual-band circularly polarized (CP) antenna for satellite communication at K and Ka-bands. The antenna consists of a folded transmitarray (TA) operating at 20 GHz and a multi-feed reflectarray (RA) operating at 30 GHz. The dual split rings are used as the TA and RA elements. The TA is placed above the RA. The TA acts as the phase-controlling surface at 20 GHz and does not affect the transmission of plane waves at 30 GHz generated by the RA. The RA simultaneously serves as the phase-controlling surface at 30 GHz and as the ground for the folded TA at 20 GHz. Owing to the combination of the folded TA and multi-feed RA with a small focal length-to-diameter ratio, the antenna profile is reduced, and the height-to-diameter ratio is only 0.4. Compared with the traditional horn feed system, the CP patch arrays integrated on the TA surface are used as the feeds in this design. The orthomode transducer (OMT) and circular polarizer are not needed, which significantly saves space and cost. The antenna was manufactured and measured to verify its performance. The measured results keep good consistent with the simulated results.
- 3 November 2021
- Published by Wiley in International Journal of RF and Microwave Computer-Aided Engineering
- Vol. 32 (2) , e22957
Dual‐band dual‐polarized transmitarray with independent control of polarization at each band
- 3 November 2021
- Published by Wiley in International Journal of RF and Microwave Computer-Aided Engineering
- Vol. 32 (2) , e22957
Dual‐band dual‐polarized transmitarray with independent control of polarization at each band
- Open Access
- 15 June 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 9, 89143-89149
Double-Layer Ku/K Dual-Band Orthogonally Polarized High-Efficiency Transmitarray Antenna
This paper presents a double-layer, dual-band, orthogonally polarized, highly efficient transmitarray antenna (TA) operated in the Ku/K band (14 GHz/20 GHz) for millimeter wave (MMW) wireless communication systems (WCS). The proposed TA consists of two types of multi-resonant dipoles with metal vias, operating in the Ku and K bands. The Ku and K elements are interlaced with each other independently to ensure dual-band orthogonally polarized operation. The proposed double-layer elements obtained a 360° phase shift range with transmission amplitude greater than −2 dB. They also achieved independent phase responses in both bands by two orthogonally arranged elements. The proposed TA has been designed, manufactured and measured. The measurement results, which are consistent with simulation results, indicate that maximum gains of 25.2 and 27.4 dBi corresponding to aperture efficiencies of 55% and 49% are obtained at 13.75 and 20 GHz, respectively. Moreover, 1-dB gain bandwidths of 10% and 6% are also achieved in the Ku and K frequency bands, respectively. Therefore, the proposed double-layer Ku/K dual-band TA with high efficiency and simple design is a good candidate for MMW WCS.
- 15 June 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 9, 89143-89149
Open AccessDouble-Layer Ku/K Dual-Band Orthogonally Polarized High-Efficiency Transmitarray Antenna
This paper presents a double-layer, dual-band, orthogonally polarized, highly efficient transmitarray antenna (TA) operated in the Ku/K band (14 GHz/20 GHz) for millimeter wave (MMW) wireless communication systems (WCS). The proposed TA consists of two types of multi-resonant dipoles with metal vias, operating in the Ku and K bands. The Ku and K elements are interlaced with each other independently to ensure dual-band orthogonally polarized operation. The proposed double-layer elements obtained a 360° phase shift range with transmission amplitude greater than −2 dB. They also achieved independent phase responses in both bands by two orthogonally arranged elements. The proposed TA has been designed, manufactured and measured. The measurement results, which are consistent with simulation results, indicate that maximum gains of 25.2 and 27.4 dBi corresponding to aperture efficiencies of 55% and 49% are obtained at 13.75 and 20 GHz, respectively. Moreover, 1-dB gain bandwidths of 10% and 6% are also achieved in the Ku and K frequency bands, respectively. Therefore, the proposed double-layer Ku/K dual-band TA with high efficiency and simple design is a good candidate for MMW WCS.
- 11 May 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 20 (7) , 1317-1321
Dual-Band Wideband Reflect-Transmit-Array With Different Polarizations Using Three-Layer Elements
A reflect-transmit-array antenna (RTA) with dual operating modes is proposed in this study. The proposed RTA, which has a three-layer structure without air layers, can achieve a reflectarray-mode (RAM) at 1114 GHz and a transmitarray-mode (TAM) at 1519 GHz. When the incident electromagnetic (EM) wave is Y-polarization, the RTA operates at RAM, and the reflected EM wave is Y-polarization. In comparison, the RTA operates at TAM and the transmitted EM wave is circular polarization (CP) when the incident EM wave is X-polarization. The dual-mode wideband reflect-transmit-array has been fabricated and measured to validate the design. The measured results indicate that 1-dB bandwidth of 15.7% (11.713.7 GHz) can be achieved in RAM and that the maximum aperture efficiency is 63% at 12.4 GHz. Furthermore, 1-dB bandwidth of 17.6% (15.518.5 GHz) can be achieved in TAM, and the axial ratio (AR) is less than 2.3 dB within the operating band. Our findings prove a RTA, which can produce different polarizations (linear polarization (LP) and CP) radiation at different modes with a simple architecture without an air layer.
- 11 May 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 20 (7) , 1317-1321
Dual-Band Wideband Reflect-Transmit-Array With Different Polarizations Using Three-Layer Elements
A reflect-transmit-array antenna (RTA) with dual operating modes is proposed in this study. The proposed RTA, which has a three-layer structure without air layers, can achieve a reflectarray-mode (RAM) at 1114 GHz and a transmitarray-mode (TAM) at 1519 GHz. When the incident electromagnetic (EM) wave is Y-polarization, the RTA operates at RAM, and the reflected EM wave is Y-polarization. In comparison, the RTA operates at TAM and the transmitted EM wave is circular polarization (CP) when the incident EM wave is X-polarization. The dual-mode wideband reflect-transmit-array has been fabricated and measured to validate the design. The measured results indicate that 1-dB bandwidth of 15.7% (11.713.7 GHz) can be achieved in RAM and that the maximum aperture efficiency is 63% at 12.4 GHz. Furthermore, 1-dB bandwidth of 17.6% (15.518.5 GHz) can be achieved in TAM, and the axial ratio (AR) is less than 2.3 dB within the operating band. Our findings prove a RTA, which can produce different polarizations (linear polarization (LP) and CP) radiation at different modes with a simple architecture without an air layer.
- 26 February 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 69 (9) , 6016-6021
Multifunctional Tri-Band Dual-Polarized Antenna Combining Transmitarray and Reflectarray
A multifunctional tri-band antenna combining transmitarray (TA) and reflectarray (RA) is presented in this communication. Five-layer patches etched on three dielectric substrates with two air gaps are used as the unit cell. Cross dipoles inserted in cross slots control transmission characteristics at Ku-band (14 GHz). Double square rings on the top and bottom layers control reflection characteristics at K (21 GHz) and Ka (30 GHz)-bands, respectively. The antenna has dual-polarized characteristics in each band. The phase shift range that can be obtained is 360° for 3 dB transmission magnitude at Ku-band and 0.15 dB reflection magnitude at K and Ka-bands. The tri-band dual-polarized TA/RA antenna is designed, manufactured, and measured to verify the performance. The simulated results keep consistent with the measured ones. The measured results show that the TA has a peak gain of 23.8 dBi with an aperture efficiency of 40% at 14.25 GHz and 1-dB gain bandwidth of 6.5%. The RA has a peak gain of 28 dBi with an aperture efficiency of 44% at 21 GHz and 1-dB gain bandwidth of 7.3%, and has a peak gain of 31.5 dBi with an aperture efficiency of 47% at 30.5 GHz and 1-dB gain bandwidth of 7.1%.
- 26 February 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 69 (9) , 6016-6021
Multifunctional Tri-Band Dual-Polarized Antenna Combining Transmitarray and Reflectarray
A multifunctional tri-band antenna combining transmitarray (TA) and reflectarray (RA) is presented in this communication. Five-layer patches etched on three dielectric substrates with two air gaps are used as the unit cell. Cross dipoles inserted in cross slots control transmission characteristics at Ku-band (14 GHz). Double square rings on the top and bottom layers control reflection characteristics at K (21 GHz) and Ka (30 GHz)-bands, respectively. The antenna has dual-polarized characteristics in each band. The phase shift range that can be obtained is 360° for 3 dB transmission magnitude at Ku-band and 0.15 dB reflection magnitude at K and Ka-bands. The tri-band dual-polarized TA/RA antenna is designed, manufactured, and measured to verify the performance. The simulated results keep consistent with the measured ones. The measured results show that the TA has a peak gain of 23.8 dBi with an aperture efficiency of 40% at 14.25 GHz and 1-dB gain bandwidth of 6.5%. The RA has a peak gain of 28 dBi with an aperture efficiency of 44% at 21 GHz and 1-dB gain bandwidth of 7.3%, and has a peak gain of 31.5 dBi with an aperture efficiency of 47% at 30.5 GHz and 1-dB gain bandwidth of 7.1%.
- 24 February 2021
- Published by Hindawi Limited in International Journal of RF and Microwave Computer-Aided Engineering
- Vol. 31 (5) , e22604
Research on conformal reflectarray for RCS enhancement in specific angular domain
In this paper, a new application scenario for the conformal reflectarray is proposed. A conformal reflectarray element composed of a split ring and two arcs acting as phase shift lines is adopted. The phase shift between 0° and 360° is achieved by adjusting the length of the two arc lines. A new phase distribution calculation method is proposed to achieve a 10‐dB enhancement of monostatic radar cross section (RCS) at 15° to 30° of the tail of the missile. Projectiles (missile body) with and without the conformal reflectarray are fabricated and measured. Measurement results showed that the projectile with the proposed conformal reflectarray achieves RCS enhancement in the angular range of 15° to 30°. Specifically, RCS enhancements of 17.6, 10.43, and 29.02 dB are achieved at 15°, 30°, and the design angle of 22.5°, respectively. This work is the first to apply a conformal reflectarray to RCS enhancement in a specific angular domain.
- 24 February 2021
- Published by Hindawi Limited in International Journal of RF and Microwave Computer-Aided Engineering
- Vol. 31 (5) , e22604
Research on conformal reflectarray for RCS enhancement in specific angular domain
In this paper, a new application scenario for the conformal reflectarray is proposed. A conformal reflectarray element composed of a split ring and two arcs acting as phase shift lines is adopted. The phase shift between 0° and 360° is achieved by adjusting the length of the two arc lines. A new phase distribution calculation method is proposed to achieve a 10‐dB enhancement of monostatic radar cross section (RCS) at 15° to 30° of the tail of the missile. Projectiles (missile body) with and without the conformal reflectarray are fabricated and measured. Measurement results showed that the projectile with the proposed conformal reflectarray achieves RCS enhancement in the angular range of 15° to 30°. Specifically, RCS enhancements of 17.6, 10.43, and 29.02 dB are achieved at 15°, 30°, and the design angle of 22.5°, respectively. This work is the first to apply a conformal reflectarray to RCS enhancement in a specific angular domain.
- Open Access
- 22 December 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of Antennas and Propagation
- Vol. 2, 104-109
Double-Layer 45° Linearly Polarized Wideband and Highly Efficient Transmitarray Antenna
This letter presents a double-layer 45° linearly polarized (LP) wideband and highly efficient transmitarray antenna (TA). The proposed element is composed of two multi-resonant dipoles and four metal vias. The dipoles are placed on the diagonal of the unit cell and printed on both sides of the dielectric substrate. The metal vias which penetrate the substrate and connect the upper and lower dipoles are used to improve the transmission efficiency and obtain the large phase shift range of the proposed element. The proposed element realizes a full 360° phase shift range with a smooth slope in the band, and the magnitude loss is less than 1.5 dB at 20 GHz. The proposed TA is designed, manufactured, and measured. The measurement and simulation results are consistent. Measurement results indicate that the proposed TA has a maximum gain of 26.9 dBi at 20 GHz and an aperture efficiency of 53.5% with a 1 dB gain bandwidth of 12% (18.8–21.2 GHz). The proposed double-layer 45° LP TA shows enhanced bandwidth and simple design. Using a double-layer structure opens possibilities for TA design.
- 22 December 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of Antennas and Propagation
- Vol. 2, 104-109
Open AccessDouble-Layer 45° Linearly Polarized Wideband and Highly Efficient Transmitarray Antenna
This letter presents a double-layer 45° linearly polarized (LP) wideband and highly efficient transmitarray antenna (TA). The proposed element is composed of two multi-resonant dipoles and four metal vias. The dipoles are placed on the diagonal of the unit cell and printed on both sides of the dielectric substrate. The metal vias which penetrate the substrate and connect the upper and lower dipoles are used to improve the transmission efficiency and obtain the large phase shift range of the proposed element. The proposed element realizes a full 360° phase shift range with a smooth slope in the band, and the magnitude loss is less than 1.5 dB at 20 GHz. The proposed TA is designed, manufactured, and measured. The measurement and simulation results are consistent. Measurement results indicate that the proposed TA has a maximum gain of 26.9 dBi at 20 GHz and an aperture efficiency of 53.5% with a 1 dB gain bandwidth of 12% (18.8–21.2 GHz). The proposed double-layer 45° LP TA shows enhanced bandwidth and simple design. Using a double-layer structure opens possibilities for TA design.