Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Jonas Kimme has a total of 17 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Study of an additive manufacturing technology using pulsed inductive wire melting

    by Jonas Kimme, Jonas Gruner, Alexander Fröhlich, Martin Kroll

    Additive manufacturing is becoming increasingly widespread and has developed very dynamically in recent years. For the processing of metals, powder or wire is usually used as the feedstock. The energy source used in wire-based processes is usually electric arcs or lasers. In this contribution, a technological approach for additive manufacturing of metal structures by induction melting with pulsed generator power is used. Therefore, the principle of oscillating Lorentz forces is utilized in this approach and analytically investigated with the aid of a FE simulation model. In the experiments, a continuously fed steel wire is inductively melted and deposited dropwise onto a substrate heated to different preheating temperatures without the use of a nozzle or crucible.


  • Open Access

    Droplet Formation and Energy Input during Induction Wire Melting with Pulsed and Constant Generator Power

    by Jonas Kimme, Jonas Gruner, André Hälsig, Jonas Hensel

    Induction heating is a fast, reproducible, and efficient heating method used in various manufacturing processes. However, there is no established additive manufacturing (AM) process based on induction heating using wire as feedstock. This study investigates a novel approach to AM based on inductive heating, where a steel wire is melted and droplets are detached periodically using a two-winding induction coil. The process parameters and energy input into the droplets are characterized. The induction generator exhibits a sluggish response to the excitation voltage, resulting in a lag in the coil current. The process is captured using a high-speed camera, revealing a regular droplet formation of 14 Hz and uniform shapes and sizes between 2.11 and 2.65 mm in diameter when operated within an appropriate process window. Larger drops and increased spatter formation occur outside this window. The proposed method allows for the production of droplets with almost spherical shapes. Further analysis and characterization of droplet formation and energy input provide insights into process optimization and indicate an overall efficiency of approximately 10%.


  • Open Access

    Droplet Formation and Energy Input during Induction Wire Melting with Pulsed and Constant Generator Power

    by Jonas Kimme, Jonas Gruner, André Hälsig, Jonas Hensel

    Induction heating is a fast, reproducible, and efficient heating method used in various manufacturing processes. However, there is no established additive manufacturing (AM) process based on induction heating using wire as feedstock. This study investigates a novel approach to AM based on inductive heating, where a steel wire is melted and droplets are detached periodically using a two-winding induction coil. The process parameters and energy input into the droplets are characterized. The induction generator exhibits sluggish response to the excitation voltage, resulting in a lag in the coil current. The process is captured using a high-speed camera, revealing regular droplet formation and uniform size and shape when operated within an appropriate process window. Larger drops and increased spatter formation occur outside this window. The proposed method allows for the production of droplets with almost spherical shapes. Further analysis and characterization of droplet formation and energy input provide insights into process optimization and overall efficiency.


  • Open Access

    Novel Process Approach for Additive Manufacturing Using Inductive Wire Melting by Forced Droplet Detachment

    by Jonas Kimme, Alexander Fröhlich, Martin Kroll, Verena Kräusel

    To date, no AM technology for large-volume metallic components has been established on an industrial scale like Laser Powder Bed Fusion (LPBF). This contribution presents a new process approach to fabricate larger metallic structures from steel by inductive melting of a continuously fed wire. The presented method is characterized by the comparatively low energy input in contrast to comparable processes for AM, such as arc, laser, or electron beam. Previously published work is based on the principle of a melt reservoir of low-melting alloys and droplet delivery using gas pressure or vibration. In contrast, the approach described here is to transfer the material directly from the end of the wire to the substrate by continuous drop deposition. However, to avoid a stochastic material transition, a suitable process strategy has to be chosen. This challenge is met by a pulsed coil current and the resulting periodically varying Lorentz forces in order to achieve regular and forced droplet detachment. Tests confirm the principle of controlled droplet detachment and reveal the great potential of this technological approach.


  • Open Access

    Technology Innovation for the Manual Laser Cladding of High-Alloy Tool Steels

    by Jonas Kimme, Josephine Zeisig, Alexander Fröhlich, Verena Kräusel

    This paper presents the development and successful application of an inductive preheating system running simultaneously with the manual laser cladding process in order to enable the repair of high-alloy tool steels having a highly limited weldability. In this study, the design and optimization of a suitable inductor as well as the analysis of the welding process were carried out by means of FE-simulation in order to generate material deposition without imperfections. Parameter variation studies were conducted while parallel modifying the generator power resulting in different preheating temperatures. These examinations showed that by using appropriate process parameters and an inductive preheating temperature of 200 °C, crack- and pore-free deposition layers could be produced on the commercial high-alloyed PM steel Elmax. This result can be explained by FE-simulation demonstrating that the cooling rate was halved in the weld and in the heat-affected zone. In conclusion, this study shows the high potential of the developed technical innovation for the manual laser cladding of high-performance tools.


  • Open Access

    Hybrid Joining by Induction Heating of Basalt Fiber Reinforced Thermoplastic Laminates

    by Amar Al-Obaidi, Jonas Kimme, Verena Kräusel

    Induction heating was used to join basalt fiber reinforced polymer laminates (BFRPL) using the process called inductive contact joining (ICJ). Two other mechanical joining processes, nut and bolt (NB) and two-piece hollow riveting (2PR), were compared to ICJ. The obtained joints were evaluated using tensile shear tests and by analyzing fractured surfaces. Furthermore, simulation of the ICJ process was used to estimate the effective parameters. Joints produced by ICJ had superior joint strength compared to joints manufactured by 2PR. In addition, during ICJ, the BFRPL fibers were not damaged and the strength of the base material was maintained. The tensile shear forces of the ICJ process exceeded 3.5 kN and 2.5 kN for a joined, sandblasted aluminum sheet with BFRPL and for joining BFRPL to itself, respectively. Further optimization potential of the ICJ process was discovered during the investigation, so that potentially higher joint strengths and shorter processing times can be expected, making the process interesting for future industrial applications.


  • Selective induction heating of metallic microstructures for wafer-level MEMS packaging

    by Alexander Fröhlich, Christian Hofmann, Patrick Rochala, Jonas Kimme, Martin Kroll, Verena Kräusel

    Considering the demand for low temperature bonding processes in packaging of micro-electro-mechanical systems (MEMS), such as accelerometers or micro mirrors, in this paper a method for selective and energy-efficient heating of metallic intermediate

  • A Novel Method for MEMS Wafer-Level Packaging: Selective and Rapid Induction Heating for Copper-Tin SLID Bonding

    by Christian Hofmann, Alexander Frohlich, Jonas Kimme, Maik Wiemer, Thomas Otto

    Innovative packaging techniques are essential for the development of new microsystems. To integrate different materials into one package, the thermal stress on the devices has to be minimized. This paper presents a method for selective and energy-efficient induction heating of Cu-Sn layers to support and enhance the bonding process at wafer-level. Technological challenges include the inductor design for homogeneous heating, the use of high-frequency electromagnetic fields up to frequencies of f = 2.0 MHz, and the integration of the induction equipment into an industrial wafer bonder. Infrared thermography imaging was used to characterize the selective heat generation with very fast heating rates of ΔT > 150 K/s. Consequently, the wafer bonding process could be performed in t bond = 120.0 s by applying a low pressure of p = 2.2 MPa.


  • A highly efficient hybrid inductive joining technology for metals and composites

    by Verena Kräusel, Alexander Fröhlich, Martin Kroll, Patrick Rochala, Jonas Kimme, Rafael Wertheim