DLDawei Li

Dawei Li

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Dawei Li has a total of 34 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Niobium Pentoxide Films with High Laser-Induced Damage Threshold under High Temperature Environment

    by Yi Gao, Miao Zhang, Sun Han, Leihua Xu, Dawei Li, Peizhong Feng, Cheng Xu

    Laser damage resistance of films is the key to the performance and durability of high-power laser systems. High temperature, however, often leads to a certain degree of decline in film properties. Here, aiming to explore the mechanism of laser damage under high temperatures, Nb2O5 films were prepared using sol–gel method with NbCl5 as precursor and citric acid as additive. The effect of annealing temperatures in optical performance, microstructure, surface morphologies, and chemical composition of films were studied. Further investigation was carried out of the laser-induced damage threshold (LIDT) under different in situ high temperatures of the as-deposited films. The results showed that the films had prominent optical transmittance and high LIDT. Under 293 K, the LIDT of the film was the highest of 24.8 J/cm2. The increase of temperature brought down the LIDT of the films. It was attributed to the occurrence of oxygen vacancies, the sharp increase of temperature, and rise of defects and destruction of network structure. In this study, even though the LIDT of the film decreased a lot at 523 K, it was still high up to 14.1 J/cm2, representing the great potential for applications in authentic high-temperature environments.


  • Open Access

    Design of Metasurface with Nanoslits on Elliptical Curves for Generation of Dual-Channel Vector Beams

    by Xiaorong Ren, Manna Gu, Xiangyu Zeng, Rui Sun, Yuqin Zhang, Zijun Zhan, Lianmeng Li, Dawei Li, Hong Ma, Chuanfu Cheng, et al.

    The manipulations of nanoscale multi-channel vector beams (VBs) by metasurfaces hold potential applications in various important fields. In this paper, the metasurface with two sets of nanoslits arranged on elliptic curves was proposed to generate the dual-channel focused vector beams (FVBs). Each set of nanoslits was composed of the in-phase and the out-of-phase groups of nanoslits to introduce the constructive interference and destructive interference of the output light field of the nanoslits, focusing the converted spin component and eliminating the incident spin component at the focal point. The two sets of nanoslits for the channels at the two focal points were interleaved on the same ellipses, and by setting their parameters independently, the FVBs in the two channels are generated under illumination of linearly polarized light, while their orders and polarization states of FVBs were controlled independently. The generation of the FVBs with the designed metasurfaces was demonstrated by the finite-difference time domain (FDTD) simulations and by the experimental verifications. The work in this paper is of great significance for the generation of miniaturized multi-channel VBs and for broadening the applications of metasurfaces.


  • Open Access

    Fast Fabrication of Fishnet Optical Metamaterial Based on Femtosecond Laser Induced Stress Break Technique

    by Kai-Xin Zhang, Jian-Da Shao, Guo-Hang Hu, Ying-Jie Chai, Hong-Bo He, Mei-Ping Zhu, Da-Wei Li, Xiao-Feng Liu

    To speed up the fabrication of optical metamaterials by making use of the fast speed advantage of femtosecond laser preparation, a metamaterial appropriate for femtosecond laser processing was designed, and the interaction between femtosecond laser and metal-dielectric-metal fishnet stacks was investigated in detail. Two kinds of processing mechanisms, thermal melting and stress break, were revealed during the fabrication. The thermal melting process, dominated by the interaction of femtosecond laser with metals, makes the upper and lower metal layers adhere to each other, which leads to the magnetic resonance impossible. The stress break process, dominated by the interaction of femtosecond laser with dielectrics, can keep the upper and lower metal coatings isolated. Fishnet optical metamaterial was fabricated by femtosecond laser-induced stress break technique, using back side ablation, high numerical aperture and super-Gaussian beam. The resolution and speed can reach 500 nm, and 100 units/s, respectively. Spectrophotometer measurement results proved that the magnetic resonances were found in the fishnet nanostructure. The theoretical refractive index of the metamaterial on a glass substrate reached −0.12 at the wavelength of 3225 nm. It proved that femtosecond laser-induced stress break was a good and fast tool during the fabrication of optical metamaterials.


  • Open Access

    Effect of Electric Field Regulation on Laser Damage of Composite Low-Dispersion Mirrors

    by Yuhui Zhang, Yanzhi Wang, Hongbo He, Ruiyi Chen, Zhihao Wang, Dawei Li, Meiping Zhu, Yuanan Zhao, Yunxia Jin, Kui Yi, et al.

    Low dispersion mirrors are important because of their potential use in petawatt (PW) laser systems. The following two methods are known to increase the laser-induced damage threshold of low dispersion optical components: use of a wide-bandgap-material protective layer and control of electric field distribution. By controlling the electric field distribution of composite low-dispersion mirrors (CLDM), we shift the electric field peaks from the material interface into the wide-bandgap material. However, the damage threshold of modified-electric-field composite low dispersion mirror (E-CLDM) does not increase. Damage morphology shows that the initial damaged layer is Ta2O5. An immediate cause is the enhancement of the electric field in internal layers caused by surface electric field regulation. Theoretical calculations show that the damage threshold of CLDM or E-CLDM is determined by the competition results of bandgap and the electric field of layer materials. The CLDM with different materials or different protective layer periods can be optimally designed according to the electric field competition effect in the future.