Ander Portillo
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Ander Portillo has a total of 17 co-authors. Here are the top co-authors by number of shared publications:
- Javier Ereña
Department of Chemical Engineering, University of the Basque Country UPV/EHU, P.O. Box 644, 48080 Bilbao, Spain
8 shared publications - Onintze Parra Ipiña
Euskal Herriko Unibertsitatea
7 shared publications - Ainara Ateka
Department of Chemical Engineering
6 shared publications - Javier Bilbao
Department of Chemical Engineering
6 shared publications Ainara Ateka Bilbao
2 shared publications- Andres Tomas Aguayo
Department of Chemical Engineering, University of the Basque Country UPV/EHU, P.O. Box 644, 48080 Bilbao, Spain
2 shared publications
Latest Publications
- Open Access
- 1 November 2024
- Published by Elsevier in Renewable Energy
- Vol. 237
Upgrading gasoline production through optimizing zeolite properties in the direct hydrogenation of CO2/CO
- 1 November 2024
- Published by Elsevier in Renewable Energy
- Vol. 237
Open AccessUpgrading gasoline production through optimizing zeolite properties in the direct hydrogenation of CO2/CO
- Open Access
- 14 March 2024
- Published by EHU Press in EKAIA Euskal Herriko Unibertsitateko Zientzia eta Teknologia Aldizkaria
- No. 46,p. 371-388
CO2-a bahitu eta balorizatzeko prozesuen ekarpena Energiaren Nazioarteko Erakundearen agertokietan
Klima-aldaketa da gaur egungo arazo handienetakoa gizartean. Hori dela eta, Energiaren Nazioarteko Agentziak (IEA) hainbat agertoki proposatu ditu, egungo politika eta joeren arabera, jarraitu beharreko gidalerroekin. Ildo horien artean, azkenaldian garrantzi handiagoa ematen zaie CO2-a bahitu, biltegiratu eta erabiltzeko prozesuei, bereziki azken horri. Hala ere, CO2-a bahitzeko prozesuak (airetik zuzeneko bahiketa, errekuntza aurrekoa, errekuntza ostekoa eta oxierrekuntza) instalatzen diren instalazioetako etapa garestiena dira oraindik. Horregatik, CO2-a biltegiratu ordez, berotegi-efektua eragiten duen gas hori erabiltzea proposatzen da, hartara, emisio gehigarririk gabeko karbono-zikloak sortzeko. Erabilera-prozesuen artean, prozesu biologikoak eta kimikoak bereizten dira. Lehengo kasuan, karbonoaren finkapen biologikoa egiten da mikroorganismoak erabiliz, CO2-a bioproduktu bihurtzeko. Prozesu kimikoetan, aldiz, CO2-a ezabatzeko eta beste produktu bat bihurtzeko erreakzioak gertarazten dira. Horien artean, honako hauek dira aipagarrienak: reforminga, hidrogenazioa, mineralizazioa, karboxilazioa eta bihurketa kimiko eta elektrokimikoa. Erabilera-prozesu horiek IEAren helburuak lortzen lagunduko lukete, hots, 2050ean karbono-emisio neutroak lortzea.
- 14 March 2024
- Published by EHU Press in EKAIA Euskal Herriko Unibertsitateko Zientzia eta Teknologia Aldizkaria
- No. 46,p. 371-388
Open AccessCO2-a bahitu eta balorizatzeko prozesuen ekarpena Energiaren Nazioarteko Erakundearen agertokietan
Klima-aldaketa da gaur egungo arazo handienetakoa gizartean. Hori dela eta, Energiaren Nazioarteko Agentziak (IEA) hainbat agertoki proposatu ditu, egungo politika eta joeren arabera, jarraitu beharreko gidalerroekin. Ildo horien artean, azkenaldian garrantzi handiagoa ematen zaie CO2-a bahitu, biltegiratu eta erabiltzeko prozesuei, bereziki azken horri. Hala ere, CO2-a bahitzeko prozesuak (airetik zuzeneko bahiketa, errekuntza aurrekoa, errekuntza ostekoa eta oxierrekuntza) instalatzen diren instalazioetako etapa garestiena dira oraindik. Horregatik, CO2-a biltegiratu ordez, berotegi-efektua eragiten duen gas hori erabiltzea proposatzen da, hartara, emisio gehigarririk gabeko karbono-zikloak sortzeko. Erabilera-prozesuen artean, prozesu biologikoak eta kimikoak bereizten dira. Lehengo kasuan, karbonoaren finkapen biologikoa egiten da mikroorganismoak erabiliz, CO2-a bioproduktu bihurtzeko. Prozesu kimikoetan, aldiz, CO2-a ezabatzeko eta beste produktu bat bihurtzeko erreakzioak gertarazten dira. Horien artean, honako hauek dira aipagarrienak: reforminga, hidrogenazioa, mineralizazioa, karboxilazioa eta bihurketa kimiko eta elektrokimikoa. Erabilera-prozesu horiek IEAren helburuak lortzen lagunduko lukete, hots, 2050ean karbono-emisio neutroak lortzea.
- Open Access
Setting up In2O3-ZrO2/SAPO-34 Catalyst for Improving Olefin Production via Hydrogenation of CO2/CO Mixtures
The adequate configuration and the effect of the reduction was studied for the In2O3-ZrO2/SAPO-34 catalyst with the aim of improving its performance (activity and selectivity in the pseudo-steady state) for the hydrogenation of CO, CO2 and CO2/CO (COx) mixtures into olefins. The experiments were carried out in a packed bed reactor at 400 °C; 30 bar; a H2/COx ratio of 3; CO2/COx ratios of 0, 0.5 and 1; a space time (referred to as In2O3-ZrO2 catalyst mass) of 3.35 gInZr h molC−1; and a time on stream up to 24 h. The mixture of individual catalyst particles, with an SAPO-34 to In2O3-ZrO2 mass ratio of 1/2, led to a better performance than hybrid catalysts prepared via pelletizing and better than the arrangement of individual catalysts in a dual bed. The deactivation of the catalyst using coke deposition and the remnant activity in the pseudo-steady state of the catalyst were dependent on the CO2 content in the feed since the synergy of the capabilities of the SAPO-34 catalyst to form coke and of the In2O3-ZrO2 catalyst to hydrogenate its precursors were affected. The partial reduction of the In2O3-ZrO2/SAPO-34 catalyst (corresponding to a superficial In0/In2O3 ratio of 0.04) improved its performance over the untreated and fully reduced catalyst in the hydrogenation of CO to olefins, but barely affected CO2/CO mixtures’ hydrogenation.
Open AccessSetting up In2O3-ZrO2/SAPO-34 Catalyst for Improving Olefin Production via Hydrogenation of CO2/CO Mixtures
The adequate configuration and the effect of the reduction was studied for the In2O3-ZrO2/SAPO-34 catalyst with the aim of improving its performance (activity and selectivity in the pseudo-steady state) for the hydrogenation of CO, CO2 and CO2/CO (COx) mixtures into olefins. The experiments were carried out in a packed bed reactor at 400 °C; 30 bar; a H2/COx ratio of 3; CO2/COx ratios of 0, 0.5 and 1; a space time (referred to as In2O3-ZrO2 catalyst mass) of 3.35 gInZr h molC−1; and a time on stream up to 24 h. The mixture of individual catalyst particles, with an SAPO-34 to In2O3-ZrO2 mass ratio of 1/2, led to a better performance than hybrid catalysts prepared via pelletizing and better than the arrangement of individual catalysts in a dual bed. The deactivation of the catalyst using coke deposition and the remnant activity in the pseudo-steady state of the catalyst were dependent on the CO2 content in the feed since the synergy of the capabilities of the SAPO-34 catalyst to form coke and of the In2O3-ZrO2 catalyst to hydrogenate its precursors were affected. The partial reduction of the In2O3-ZrO2/SAPO-34 catalyst (corresponding to a superficial In0/In2O3 ratio of 0.04) improved its performance over the untreated and fully reduced catalyst in the hydrogenation of CO to olefins, but barely affected CO2/CO mixtures’ hydrogenation.
- 10 May 2023
- Published by Udako Euskal Unibertsitatea
Mn2O3-ZnO katalizatzailea metanolaren sintesirako, CO2-tik abiatuta hidrokarburoak ekoizteko bitartekari gisa
Mn2O3-ZnO katalizatzailea metanolaren sintesirako, CO2-tik abiatuta hidrokarburoak ekoizteko bitartekari gisa produkzioaren informazio-fitxa
- 10 May 2023
- Published by Udako Euskal Unibertsitatea
Mn2O3-ZnO katalizatzailea metanolaren sintesirako, CO2-tik abiatuta hidrokarburoak ekoizteko bitartekari gisa
Mn2O3-ZnO katalizatzailea metanolaren sintesirako, CO2-tik abiatuta hidrokarburoak ekoizteko bitartekari gisa produkzioaren informazio-fitxa
- 10 May 2023
- Published by Udako Euskal Unibertsitatea
Zeoliten diskriminazioa olefinak ekoizteko CO2-aren hidrogenazioaren bitartez
Zeoliten diskriminazioa olefinak ekoizteko CO2-aren hidrogenazioaren bitartez produkzioaren informazio-fitxa
- 10 May 2023
- Published by Udako Euskal Unibertsitatea
Zeoliten diskriminazioa olefinak ekoizteko CO2-aren hidrogenazioaren bitartez
Zeoliten diskriminazioa olefinak ekoizteko CO2-aren hidrogenazioaren bitartez produkzioaren informazio-fitxa
- Open Access
- 14 July 2022
- Published by EHU Press in EKAIA Euskal Herriko Unibertsitateko Zientzia eta Teknologia Aldizkaria
- No. 43,p. 309-324
Hidrokarburo aromatikoen ekoizpena CO2-aren balorizazio zuzenaren bidez
Berotegi-efektua eragiten duten gasen emisioen etengabeko igoera gero eta garrantzi handiagoa hartzen ari da gizartean; izan ere, horiek dira klima-aldaketaren eragile nagusiak, bereziki, CO2-a. Industria kimikoa CO2 gehien isurtzen duen eremua da, eta industria horretako ekoizpen-prozesu nagusiak optimizatzea gaur egungo erronka bihurtu da. Besteak beste, CO2-aren isurpenak ahal den neurrian murriztuz, eta, horrez gain, CO2-a bahitzen eta balio erantsiko produktuen ekoizpenean lehengai modura erabiliz; adibidez, hidrokarburo aromatikoen ekoizpenean. Konposatu aromatikoen (bentzenoa, toluenoa eta xilenoa batik bat) eskaria etengabe igotzen ari da, eguneroko gero eta produktu gehiagoren sintesian erabiltzen baitira (plastikoak, pigmentuak edota detergenteak). CO2-aren hidrogenazioaren bidez hidrokarburo aromatikoen ekoizpena bi ibilbide nagusien bidez burutu daiteke: (i) Fischer-Tropsch sintesia eta (ii) oxigenatuak (metanola eta DME) bitartekari dituen sintesi-prozesua. Lan honetan bi prozesu horietan erabiltzen diren katalizatzaile nagusiak, erreakzio-baldintzak eta erreakzio-mekanismoak aztertu dira, bilaketa bibliografiko sakonaren bidez. Gainera, bi prozesuen arteko desberdintasunak eta bakoitzak dituen abantaila eta desabantailak aipatu dira.
- 14 July 2022
- Published by EHU Press in EKAIA Euskal Herriko Unibertsitateko Zientzia eta Teknologia Aldizkaria
- No. 43,p. 309-324
Open AccessHidrokarburo aromatikoen ekoizpena CO2-aren balorizazio zuzenaren bidez
Berotegi-efektua eragiten duten gasen emisioen etengabeko igoera gero eta garrantzi handiagoa hartzen ari da gizartean; izan ere, horiek dira klima-aldaketaren eragile nagusiak, bereziki, CO2-a. Industria kimikoa CO2 gehien isurtzen duen eremua da, eta industria horretako ekoizpen-prozesu nagusiak optimizatzea gaur egungo erronka bihurtu da. Besteak beste, CO2-aren isurpenak ahal den neurrian murriztuz, eta, horrez gain, CO2-a bahitzen eta balio erantsiko produktuen ekoizpenean lehengai modura erabiliz; adibidez, hidrokarburo aromatikoen ekoizpenean. Konposatu aromatikoen (bentzenoa, toluenoa eta xilenoa batik bat) eskaria etengabe igotzen ari da, eguneroko gero eta produktu gehiagoren sintesian erabiltzen baitira (plastikoak, pigmentuak edota detergenteak). CO2-aren hidrogenazioaren bidez hidrokarburo aromatikoen ekoizpena bi ibilbide nagusien bidez burutu daiteke: (i) Fischer-Tropsch sintesia eta (ii) oxigenatuak (metanola eta DME) bitartekari dituen sintesi-prozesua. Lan honetan bi prozesu horietan erabiltzen diren katalizatzaile nagusiak, erreakzio-baldintzak eta erreakzio-mekanismoak aztertu dira, bilaketa bibliografiko sakonaren bidez. Gainera, bi prozesuen arteko desberdintasunak eta bakoitzak dituen abantaila eta desabantailak aipatu dira.
- Open Access
- 31 March 2022
- Published by Elsevier in SSRN Electronic Journal
Role of Zr Loading into In2o3 Catalysts for the Direct Conversion of Co2/Co Mixtures into Light Olefins
The effect of the ZrO2 content on the performance (activity, selectivity, stability) of In2O3‑ZrO2 catalyst has been studied on the hydrogenation of CO2/CO mixtures. Upgrading the CO2/CO hydrogenating capacity of this catalyst is a key feature for the viability of using In2O3-ZrO2/SAPO-34 tandem catalysts for the direct conversion of CO2 and syngas into olefins via oxygenates as intermediates. The interest of co-feeding syngas together with CO2 resides in jointly valorizing syngas derived from biomass or wastes (via gasification) and supplying the required H2. The experiments of methanol synthesis and direct synthesis of olefins, with In2O3-ZrO2 and In2O3-ZrO2/SAPO-34 catalysts, respectively, have been carried out under the appropriate conditions for the direct olefins synthesis (400 ºC, 30 bar, H2/COX ratio=3) in an isothermal fixed bed reactor at low space time values (kinetic conditions) to evaluate the behavior and deactivation of the catalysts.The Zr/In ratio of 1/2 favors the conversion of CO2 and COX, attaining good oxygenates selectivity, and prevents the sintering attributable to the over-reduction of the In2O3 (more significant for syngas feeds). The improvement is more remarkable in the direct olefins synthesis, where the thermodynamic equilibrium of methanol formation is displaced, and methanation suppressed (in a greater extent for high CO content feeds). With the In2O3‑ZrO2/SAPO-34 tandem catalysts, the conversion of COx almost 5 folds respect oxygenates synthesis with In2O3-ZrO2 catalyst, meaning the yield of the target products boosts from ~0.5 % of oxygenates to >3 % of olefins (selectivity >70 %) for mixtures of CO2/COX of 0.5, where an optimum performance has been obtained.
- 31 March 2022
- Published by Elsevier in SSRN Electronic Journal
Open AccessRole of Zr Loading into In2o3 Catalysts for the Direct Conversion of Co2/Co Mixtures into Light Olefins
The effect of the ZrO2 content on the performance (activity, selectivity, stability) of In2O3‑ZrO2 catalyst has been studied on the hydrogenation of CO2/CO mixtures. Upgrading the CO2/CO hydrogenating capacity of this catalyst is a key feature for the viability of using In2O3-ZrO2/SAPO-34 tandem catalysts for the direct conversion of CO2 and syngas into olefins via oxygenates as intermediates. The interest of co-feeding syngas together with CO2 resides in jointly valorizing syngas derived from biomass or wastes (via gasification) and supplying the required H2. The experiments of methanol synthesis and direct synthesis of olefins, with In2O3-ZrO2 and In2O3-ZrO2/SAPO-34 catalysts, respectively, have been carried out under the appropriate conditions for the direct olefins synthesis (400 ºC, 30 bar, H2/COX ratio=3) in an isothermal fixed bed reactor at low space time values (kinetic conditions) to evaluate the behavior and deactivation of the catalysts.The Zr/In ratio of 1/2 favors the conversion of CO2 and COX, attaining good oxygenates selectivity, and prevents the sintering attributable to the over-reduction of the In2O3 (more significant for syngas feeds). The improvement is more remarkable in the direct olefins synthesis, where the thermodynamic equilibrium of methanol formation is displaced, and methanation suppressed (in a greater extent for high CO content feeds). With the In2O3‑ZrO2/SAPO-34 tandem catalysts, the conversion of COx almost 5 folds respect oxygenates synthesis with In2O3-ZrO2 catalyst, meaning the yield of the target products boosts from ~0.5 % of oxygenates to >3 % of olefins (selectivity >70 %) for mixtures of CO2/COX of 0.5, where an optimum performance has been obtained.
- Open Access
- 1 May 2021
- Published by Elsevier in Renewable Energy
- Vol. 169, 1242-1251
Macro-kinetic model for CuO–ZnO–ZrO2@SAPO-11 core-shell catalyst in the direct synthesis of DME from CO/CO2
- 1 May 2021
- Published by Elsevier in Renewable Energy
- Vol. 169, 1242-1251
Open AccessMacro-kinetic model for CuO–ZnO–ZrO2@SAPO-11 core-shell catalyst in the direct synthesis of DME from CO/CO2
- 26 September 2018
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
- Vol. 57 (42) , 14202-14212
Empirical Correlation for Calculating the Pressure Drop in Microhydrocyclones
- 26 September 2018
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
- Vol. 57 (42) , 14202-14212
Empirical Correlation for Calculating the Pressure Drop in Microhydrocyclones