OOOleksandr Obodovych

Oleksandr Obodovych

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Oleksandr Obodovych has a total of 52 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    BIOETHANOL AS A STRATEGICALLY IMPORTANT FACTOR IN ENERGY AND ENVIRONMENTAL SECURITY OF UKRAINE

    by O.M. Obodovych, O.E. Stepanova, N.M. Fialko

    The article provides a review of literature on the problem of improving motor fuels by adding bioethanol to gasoline with subsequent cavitation treatment of this mixture. A review and analysis of literature data on the processing of lignocellulosic raw materials and its waste into fuel bioethanol and the possibility of its use in a mixture with gasoline for internal combustion engines in the conditions of the Ukrainian economy are conducted. The use of rotary-pulsation devices developed at the Institute of Engineering Thermophysics of the National Academy of Sciences of Ukraine for mixing and homogenizing gasoline-alcohol solutions in order to increase their stability and prevent stratification is proposed. The most common is the addition of bioethanol to gasoline in concentrations of 5, 10 and 15 %, which does not affect the operation of the internal combustion engine and allows significantly reducing exhaust emissions. The main difficulty in the production of second-generation bioethanol lies in the conversion of lignocellulosic raw materials, which involves the separation of cellulose, lignin and hemicellulose. The Institute of Engineering Thermophysics of the National Academy of Sciences of Ukraine has proposed innovative heat and mass exchange equipment to intensify this process. The other problem of the full use of bioethanol in the preparation of fuel mixtures (gasoline-bioethanol) is their stratification during long-term storage. The literature suggests the use of various types of cavitation devices to solve this problem. The Institute of Engineering Thermophysics of the National Academy of Sciences of Ukraine has developed a special design of a rotary-pulsation apparatus (RPA) designed for mixing and homogenizing gasoline-alcohol solutions in order to increase their stability and prevent stratification. Given the important role of bioethanol, it is advisable to adopt legislative initiatives that will have a simultaneous positive effect on several sectors of the economy. This will reduce the state's dependence on energy imports, increase the potential of the agricultural sector, provide additional impetus to the processing industry, and strengthen Ukraine's position in achieving environmental aims.

  • Open Access

    METHODS OF CONTROLLING STRUCTURAL-MECHANICAL AND DISPERSED CHARACTERISTICS OF POWDERED BACTERIAL PREPARATIONS

    by Oleksandr Obodovych, Olena Pereiaslavtseva, Olesya Stepanova

    Subject. Analysis of structural-mechanical and technological characteristics of powders of a number of bacterial preparations that were obtained by spray drying. Purpose. To investigate the influence of physicochemical, rheological properties of biosuspensions and their drying conditions on the structural, mechanical and dispersion characteristics of powders of a number of bacterial preparations. Methods. The objects of the study were biosuspensions of bacterial preparations, such as Lactin-K, Bifacyl, and BPS-44R, consisting of bacterial cell biomass and protective medium (PM) components. Food-grade soluble substances, including skimmed milk powder (SMP), sugar, and gelatin, were used as the PM. To obtain the powder form of the bacterial preparations, laboratory and industrial spray dryers equipped with various types of spraying devices were used. Results. The studies have shown that powders have a high level of dispersion: the particle size range is 2–40 μm, and the average particle size is 6-18 μm; powders are hygroscopic, lack sufficient flowability, and have a low bulk density of 360-550 kg/m³. The study investigated the influence of the following factors: the temperature of the biosuspension before feeding into the spray chamber, the weight ratio of biomass to protective medium in the biosuspension, and the drying temperature regime on the average particle size of the powder. Microstructural analysis established that the use of a pneumatic nozzle promotes the production of a powder with an average particle size 1.8 times smaller than that obtained using a centrifugal disc sprayer (model Ts-18). When studying the effect of different disc device types, it was found that dispersion with a high-speed disc (TsV-1.5–36, n=36,000 rpm) also contributes to a reduction in particle size by approximately 2 times compared to using a disc with a lower rotation speed (Ts-18, n=18,000 rpm). Scope of the results application. The research results can be used to determine methods that contribute to improving the qualitative characteristics of bacterial preparation powders obtained by the spray drying method.

  • ENCHANCEMENT OF TRAY EFFICIENCY IN COLUMN MASS-EXCHANGE APPARATUS

    by Yu.V. Bulii, O.M. Obodovych, M.V. Bondar, V. V. Sydorenko

    Technological calculations of the column mass–exchange apparatus assume instantaneous transfer of volatile components of vapour and liquid phases, without considering the residence time the liquid on the trays. There is a threshold below which the contact time between the phases is insufficient to reach equilibrium, and as a result, the efficiency of commonly used tray types does not exceed 0.4-0.6. The aim of the work was to study the phase equilibrium between liquid and vapour in the ethanol-water system under subatmospheric pressure; to select appropriate methods for thermodynamic thermodynamic validation of experimental data; to develop approaches for modeling mass transfer between liquid and vapour in cyclic column apparatuses in order to increase tray efficiency; and to evaluate their effectiveness in processing of ethanol–containing fractions under industrial conditions. Research methods included analytical, computational, physicochemical and chromatographic techniques using instruments and methodologies applied in the production of rectified ethanol. The custom-designed experimental apparatus was developed, which allowed to increase the accuracy measurements and reduced the time required to achieve phase equilibrium to 30–40 min. Experimental data on phase equilibrium in the ethanol-water system were obtained in the pressure range of 103 to 50.6 kPa specifically in the low ethanol concentration region (below 3.0 mоl. %), which corresponds to the operation conditions in the lower sections of distillation and rectification columns. Based on the experimental data, phase equilibrium modeling was performed for the specified pressure. The Tsuboko-Katayama equation was used for modeling. Thermodynamic validation of the results demonstrated a satisfactory level of agreement between calculated and experimental data. Phase equilibrium curves were constructed, the relationship between ethanol evaporation coefficients and pressure was established, and the inversion of equilibrium curves was identified. Mass transfer methods between liquid and vapor under controlled cycles of liquid holdup and overflow have been developed, along with designs of mass-exchange apparatus for their implementation. The hydrodynamic operating modes of trays under cyclic conditions have been determined. Experimental results have shown that the extending the contact time between phases on the trays to 30-60 seconds significantly increases the efficiency and reduces steam consumption up to 40%.

  • Open Access

    Increasing the radioprotective properties of pectin-containing products from sugar beet pulp through the discrete-pulse energy input principle

    by Oleksandr Obodovych, Bogdan Tselen, Natalia Radchenko, Olesya Stepanova, Yurii Bulii

    Under the conditions of the ongoing war in Ukraine, accompanied by continuous attacks on nuclear facilities, the risks of radioactive contamination by radionuclides have significantly increased, posing a serious threat to human life and public health. One of the approaches to addressing this problem is the use of low-esterified pectin as a dietary supplement, since it performs the function of a radioprotector in the human body and significantly reduces the risks of radiation-related diseases. Sugar beet pulp is currently considered a valuable source of such pectin. The organization of its industrial-scale processing requires the implementation of new energy-efficient equipment as well as the optimization of existing technologies in accordance with modern requirements. In the context of solving this problem, the authors proposed novel heat-and-mass-transfer equipment operating on the principle of discrete-pulse energy input (DPEI), implemented in rotor-pulsation-type equipment. It has been proven that, owing to the processes of dispersion, mixing, heating, dissolution, hydrolysis, and extraction realized in this equipment, it became possible to increase the efficiency of pectin extraction. Optimal process conditions were determined, under which a 97% extraction degree was achieved.

  • Open Access

    Rational methods of bioethanol production through comprehensive processing of carbohydrate-containing raw feedstock

    by Oleksandr Obodovych, Yurii Bulii, Olena Pereiaslavtseva, Olesya Stepanova, Roman Mukoid

    To stabilize the energy potential of the European Union member states under conditions of increasing oil and fuel prices, the feasibility of increasing the production of bioethanol and technical ethyl alcohol (TEA) from hydrocarbon-containing feedstock has been substantiated. A comparative characterization of ethanol dehydration methods is presented, including azeotropic distillation, water adsorption on molecular sieves, and pervaporation. The specific advantages and disadvantages of each method are identified. An innovative TEA production technology has been developed, the implementation of which enables a 40% reduction in specific steam consumption and a 30% and water for cooling compared to existing conventional methods. A waste-free bioethanol technology has been proposed, which involves the integrated processing of grain-based stillage (the distillers' grains) using a decanter centrifuges and an ultrafiltration unit for removing loose cakes and concentrate the fugate without using a multi-effect evaporator plant. The innovative technology was implemented at the Borok Distillery by the specialists of "Organic" LLC. Its implementation makes it possible to obtain dry distiller's grains (DDGS) with a moisture content of 10-12% and a protein content of 30-35%. Furthermore, it reduces energy consumption in the processing of raw stillage by 40%, process water consumption by 60-70%, and the prime cost of bioethanol by 15%.

  • Open Access

    ФІЗИКО-МЕХАНІЧНІ МЕТОДИ У ВИРОБНИЦТВІ ПЕКТИНОВМІСНИХ ПРОДУКТІВ З РОСЛИННОЇ СИРОВИНИ

    by О. М. Ободович, Н. А.. Гусятинська, О. Є. Степанова, Т. В. Шейко, Т. А. Резакова, К. Є. Чернявський

    Предмет. Тепломасообмінні процеси та фізико-механічні методи обробки рослинної сировини для отримання пектиновмісних продуктів. Мета. Дослідити ефективність вилучення пектинових речовин із рослинної сировини шляхом застосування гідродинамічного оброблення з використанням роторно-пульсаційних апаратів та методу дискретно-імпульсного введення енергії (ДІВЕ), а також оцінити вплив режимів обробки на якість і функціональні властивості кінцевого продукту. Методи. Рослинну сировину (яблучні вичавки, буряковий жом, морква) піддавали попередній підготовці, після чого обробляли у замкненій циркуляційній системі з роторно-пульсаційним апаратом, що забезпечував реалізацію методу ДІВЕ. Оброблення здійснювалося в умовах змінного гідродинамічного навантаження, що створювало локальні імпульсні зони високого тиску. Параметри процесу (тривалість, інтенсивність, кратність рециркуляції) варіювалися для досягнення оптимальної глибини гідролізу протопектину та екстрагування водорозчинного пектину. Результати. Встановлено, що застосування методу дискретно-імпульсного введення енергії та роторно-пульсаційного апарата дозволяє інтенсифікувати процеси масообміну, зменшити тривалість гідролізу на 30–40%, знизити температуру обробки до 45–50°C та забезпечити високий вихід пектину без втрати його функціональних властивостей. Доведено, що імпульсна дія сприяє руйнуванню клітинних оболонок сировини, збереженню нативної структури целюлозного каркасу та покращенню органолептичних показників кінцевого продукту. Сфера застосування результатів. Результати дослідження можуть бути використані для розробки промислових технологій виробництва пектинових концентратів і функціональних харчових продуктів з радіопротекторними властивостями, а також для модернізації обладнання харчової та фармацевтичної промисловості.

  • Open Access

    ОПТИМІЗАЦІЯ ВИРОБНИЦТВА ПАЛИВНОГО ЕТАНОЛУ В УКРАЇНІ: ВІДНОВЛЮВАЛЬНІ РЕСУРСИ, ЕФЕКТИВНІ ТЕХНОЛОГІЇ ТА ІННОВАЦІЙНИЙ МЕТОД ОБРОБКИ ЛІГНОЦЕЛЮЛОЗНОЇ СИРОВИНИ

    by О. М. Ободович, В. В. Сидоренко, Т. В. Шейко

    Предмет. Стаття присвячена оцінці стану, перспектив розвитку виробництва паливного етанолу в Україні та технологічних рішень щодо його покращення. Мета. Огляд потенціалу біомаси як відновлювального ресурсу для виробництва паливного етанолу в Україні, оцінка ефективності різних видів сировини та технологій, а також економічної доцільності та екологічних переваг використання паливного етанолу в енергетичному секторі. Методи. При написанні статті використовували аналітичні методи досліджень, а також методи причинно-наслідкового аналізу та логічного узагальнення. Аналізували інформацію з баз даних, включаючи PubMed, CrossRef, Scopus, WoS, Google Scholar, Index Copernicus. Результати. Наразі головними результатами комплексної переробки органічної сировини надалі залишаються енерговмістні продукти – паливний етанол та гідролізний лігнін, які мають енергетичні характеристики, сумірні з викопними видами палива. З наявної в Україні сировини для виробницта паливного етанолу лігноцелюлозна сировина залишається недорогим, поновлюваним та поширеним ресурсом, що не конкурує із продовольчими культурам. Крім того, використання лігноцелюлозної біомаси дозволяє скоротити викиди парникових газів порівняно з викопними паливами – приблизно на 30–85%, залежно від типу сировини. Отримання паливного етанолу з крохмалевмісної, цукровмісної або лігноцелюлозовмісної сировини вимагає застосування різних технологічних стадій, відповідно, собівартість паливного етанолу для кожного виду сировини є різною. У порівнянні з паливним етанолом з цукровмісної та крохмалевмісної сировини, з лігноцелюлозовмісної сировини – є дорожчим. Найбільш енерговитратною в технології отримання паливного етанолу з лігноцелюлозовмісної сировини є стадія попередньої підготовки сировини до гідролізу, оскільки цей процес та процес гідролізу розбавленими кислотами відбувається за високих температури та тиску. Для забезпечення глибокої комплексної переробки рослинної сировини, а також для зменшення загальних витрат запропоновано вдосконалення технології та обладнання, що дозволяє збільшити ступінь конверсії вихідної сировини в основні та побічні продукти. Сфера застосування результатів. Отримані, в ході дослідження результати, можуть бути використані для удосконалення технології виробництва паливного етанолу.

  • Open Access

    Numerical Modeling of Heat Transfer Through Ventilated Double-Chamber Windows

    by Borys Basok, Oleksandr Obodovych, Dmytro Davydenko, Olesya Stepanova, Hanna Koshlak

    Building windows are a dominant source of thermal energy loss, possessing significantly lower heat transfer resistance than insulated wall structures. Enhancing the energy efficiency of window systems is possible by integrating them into the building's ventilation scheme. Ventilated windows facilitate the controlled intake of external fresh air or the extraction of internal exhaust air, enabling partial heat recovery and tempering of the airflow. However, this air movement increases dissipative heat loss through the glass surfaces, necessitating an efficiency study. This research evaluates the effectiveness of ventilated windows by comparing the recovered thermal energy against these additional dissipative losses. The study is conducted via numerical modeling of coupled air flow and heat transfer within the window structure. A finite difference method is employed to solve the governing system of equations, which includes the continuity, momentum, and energy transfer equations for the air, as well as the heat conduction equation for the glass. The numerical results consistently demonstrate that the heat saved through pre-heating incoming air or recovering heat from exhaust air is greater than the additional dissipative heat loss through the glass. Therefore, the implementation of ventilated windows is confirmed to be an effective solution from an energy efficiency perspective.


  • ТECHNOLOGY AND HEAT-AND-MASS TRANSFER EQUIPMENT FOR THE INTEGRATED PROCESSING OF SUGAR BEET PULP INTO FUEL, ENERGY AND PECTIN-CONTAINING PRODUCTS

    by O.M. Obodovych, B.YA. Tselen, G.K. Ivanytskyi, V.O. Khomenko, O.M. Pereiaslavtseva

    The article analyzes existing technologies and equipment for the complex processing of sugar beet pulp into fuel and energy and pectin-containing products, establishes their advantages and disadvantages. In order to optimize the process of obtaining pectin from sugar beet pulp, heat and mass exchange equipment operating on the principle of discrete-pulse energy input (DPEI) is recommended. Sugar beet pulp is one of the main by-products of sugar production. In Europe, about 20 million tons of pulp are produced per year, and its most widespread use is in feeding farm animals. The value of the pulp is due not only to the microelement composition, but also to the presence of pectin substances. According to literature data, the pulp contains the following main components: 20-30 % cellulose, 15-20 % hemicellulose, 20-30 % pectin and 10-15 % protein. Due to this composition, obtaining such high-value products from beet pulp as pectin and fuel bioethanol may be relevant within the framework of a closed-loop economy. The process of extracting pectin substances is quite complex and consists of two interrelated stages: hydrolysis of protopectin and extraction of pectin into a solution. Pectin hydrolysis-extraction technologies are carried out under strict technological conditions using chemical technologies (acid hydrolysis: hydrochloric acid concentration – 1.5 %, hydromodule 1:15, temperature 75-900 ºС, duration of 2-3 hours). The process is characterized by a low degree of extraction and disruption of the pectin structure, which is harmful and dangerous. In addition, spent solutions of mineral acids and other hydrolyzing agents, by-products and steam condensates are potential sources of environmental pollution. To carry out the hydrolysis process – extraction of sugar beet pulp to obtain pectin at the Institute of Engineering Thermophysics of the National Academy of Sciences of Ukraine a fundamentally new type of pulsation-type extractor has been created, in which, for the first time, a combined hydrodynamic device, which includes a Venturi nozzle, has been applied for enhance cavitation effects. In order to optimize the process of obtaining pectin from sugar beet pulp, heat and mass exchange equipment operating on the principle of discrete-pulse energy input (DPEI) is recommended. After the removal of pectin, the pulp contains up to 95-97 % cellulose and practically does not contain undesirable accompanying substances (lignin, hemicellulose). In this form, the pulp is a valuable raw material for obtaining fuel bioethanol.

  • Open Access

    INFLUENCE OF COMPLEX HYDROMECHANICAL TREATMENT ON THE DISPERSION OF PLANT RAW MATERIAL IN THE TECHNOLOGY OF OBTAINING FUEL ETHANOL

    by О.м. Obodovych, Yu.V. Bulii, V.V. Sydorenko, O.E. Stepanova, B.YA. Tselen

    In the energy sector, particularly, the transport sector, biomass of plant origin is associated with additives to motor fuels with biodiesel and bioethanol. The main purpose of the pretreatment of lignocellulosic raw materials for hydrolysis is to destroy the heterogeneous matrix, increase the surface area and porosity of the cellulose material, and free carbohydrates from lignin bonds. One of the key factors affecting the efficiency of pretreatment and subsequent hydrolysis is the size of the raw material particles obtained at the stage of mechanical grinding. During subsequent processing in rotary reactors based on centrifugal pumps, the raw material is subjected to additional influence of thermophysical factors, which contribute to a further increase in the degree of dispersion of the raw material, increasing the specific surface area of the cellulose material. The work aimed to determine the influence of the complex thermophysical phenomena of hydromechanical processing on the particle size of plant raw materials during their pretreatment for hydrolysis in the technology of obtaining fuel ethanol. The feedstock was wheat straw and corn stalks, chopped on a straw cutter, and once processed in a disintegrator. The determination of the plant raw material particle size distribution was carried out using sieve analysis. The processing of the suspension of plant raw materials was carried out on experimental setup with a reactor mixer, which is a rotor-pulsation apparatus. The particle size distribution in the range of 0.001-0.08 mm was determined using a laser particle size analyzer Microsizer 201 A. Further crushing of the straw was carried out on experimental setup. It was determined that with an increase in the solid : liquid ratio from 1 : 5 to 1 : 15, the size of the parts decreases by 35–40 %, and when increasing the solid : liquid ratio from 1 : 5 to 1 : 10 — by 3–5 %. Changing the solid : liquid ratio from 1 : 15 to 1 : 10 for 10 cycles of processing the dispersion in the reactor-mixer until the temperature drops from 47 to 42 °C, at which the productivity of the equipment increases in 1.5–2 times, energy consumption changes by 25–30 %. The temperature of an aqueous dispersion of wheat straw (corn stalk) at a ratio of 1 : 15, mixed in the reactor-mixer for 10 cycles, moves from 17 to 22 °C, at the same time at solid : liquid ratio 1 : 10 at 17 to 42 °С, at solid : liquid ratio 1 : 5 at 17 to 47 °С. When processing an aqueous dispersion with wheat straw in a reactor mixer with a pulsation frequency of 1 kHz, 42 cycles are required to achieve 100 % frequency in less than 80 µm. When the pulsation frequency increases from 1 to 3 kHz, the number of cycles changes to 30. When the pulsation frequency changes from 1 to 5 kHz, the number of cycles decreases to 27. Changing the shear rate of the flow has a more significant effect on particle dispersion than the pulsation frequency. The number of processing cycles is reduced by 5–7 %. Bibl. 15, Fig. 8.