Julie Mougin
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Julie Mougin has a total of 117 co-authors. Here are the top co-authors by number of shared publications:
- Jerome Aicart
Univ. Grenoble Alpes, CEA/LITEN, 38054 Grenoble Cedex 9, France
4 shared publications Stéphane Di Iorio
3 shared publications- Alice Galdi
Helmholtz-Zentrum Berlin für Materialien und Energie GmbH
2 shared publications - André Chatroux
CEA-LITEN
2 shared publications Bertrand Morel
2 shared publications- Bertrand Morel
CEA/LITEN, Université Grenoble Alpes, 17 rue des Martyrs, CEDEX 9, 38054 Grenoble, France
2 shared publications
Latest Publications
- 13 November 2026
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 293
National Approaches to Reducing the Cost of Low-Emissions Hydrogen
- 13 November 2026
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 293
National Approaches to Reducing the Cost of Low-Emissions Hydrogen
- Open Access
- 4 November 2026
- Published by EDP Sciences in Matériaux & Techniques
- Vol. 114 (5) , 504
Les céramiques avancées : de la chimie des matériaux aux applications stratégiques
Cet article dresse un panorama du rôle central des matériaux céramiques dans les secteurs industriels stratégiques et des innovations qui accompagnent leur développement. Il met en évidence leur adoption croissante dans des domaines tels que l’aérospatial, l’énergie, l’électronique, la mobilité électrique et la santé, où leurs propriétés uniques (résistance thermique, stabilité chimique, performances mécaniques ou fonctionnelles) répondent à des exigences extrêmes. Les composites à matrice céramique (CMC), les matériaux pour batteries ou encore les biocéramiques illustrent la diversité des applications. L’article souligne également les avancées majeures en termes de procédés, notamment dans la fabrication additive, qui permet l’élaboration de structures complexes et optimisées, et dans l’intelligence artificielle, qui accélère la découverte de nouveaux matériaux et l’optimisation des procédés. Les nanotechnologies et les matériaux hybrides offrent par ailleurs de nouvelles possibilités d’ingénierie des propriétés grâce à un contrôle fin des microstructures et des interfaces. Cependant, ces évolutions s’accompagnent de défis importants liés à la mise en œuvre des procédés, à la maîtrise des phénomènes physico-chimiques et à l’industrialisation. La stabilité des nanostructures, la gestion des interfaces solides et la montée en échelle restent des enjeux majeurs. Enfin, l’article met en lumière les défis environnementaux et sociétaux associés à l’industrie céramique, notamment la forte consommation énergétique des procédés thermiques, la dépendance aux matières premières critiques et les difficultés de recyclage. Il insiste sur la nécessité de développer des procédés plus sobres, d’intégrer des approches d’analyse du cycle de vie et de s’inscrire dans une logique d’économie circulaire. Ainsi, les céramiques apparaissent comme des matériaux clés pour les transitions technologiques et environnementales, dont le développement futur reposera sur une approche interdisciplinaire et durable.
- 4 November 2026
- Published by EDP Sciences in Matériaux & Techniques
- Vol. 114 (5) , 504
Open AccessLes céramiques avancées : de la chimie des matériaux aux applications stratégiques
Cet article dresse un panorama du rôle central des matériaux céramiques dans les secteurs industriels stratégiques et des innovations qui accompagnent leur développement. Il met en évidence leur adoption croissante dans des domaines tels que l’aérospatial, l’énergie, l’électronique, la mobilité électrique et la santé, où leurs propriétés uniques (résistance thermique, stabilité chimique, performances mécaniques ou fonctionnelles) répondent à des exigences extrêmes. Les composites à matrice céramique (CMC), les matériaux pour batteries ou encore les biocéramiques illustrent la diversité des applications. L’article souligne également les avancées majeures en termes de procédés, notamment dans la fabrication additive, qui permet l’élaboration de structures complexes et optimisées, et dans l’intelligence artificielle, qui accélère la découverte de nouveaux matériaux et l’optimisation des procédés. Les nanotechnologies et les matériaux hybrides offrent par ailleurs de nouvelles possibilités d’ingénierie des propriétés grâce à un contrôle fin des microstructures et des interfaces. Cependant, ces évolutions s’accompagnent de défis importants liés à la mise en œuvre des procédés, à la maîtrise des phénomènes physico-chimiques et à l’industrialisation. La stabilité des nanostructures, la gestion des interfaces solides et la montée en échelle restent des enjeux majeurs. Enfin, l’article met en lumière les défis environnementaux et sociétaux associés à l’industrie céramique, notamment la forte consommation énergétique des procédés thermiques, la dépendance aux matières premières critiques et les difficultés de recyclage. Il insiste sur la nécessité de développer des procédés plus sobres, d’intégrer des approches d’analyse du cycle de vie et de s’inscrire dans une logique d’économie circulaire. Ainsi, les céramiques apparaissent comme des matériaux clés pour les transitions technologiques et environnementales, dont le développement futur reposera sur une approche interdisciplinaire et durable.
- Open Access
- 27 August 2026
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 270
Research and technology infrastructures in the European hydrogen economy: Status, needs and innovation concepts
- 27 August 2026
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 270
Open AccessResearch and technology infrastructures in the European hydrogen economy: Status, needs and innovation concepts
- Open Access
- 16 July 2026
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 258
Manufacturing and long-term potentio-galvanostatic operation of high temperature electrolysis stacks in the 10-to-20 kWDC power range
- 16 July 2026
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 258
Open AccessManufacturing and long-term potentio-galvanostatic operation of high temperature electrolysis stacks in the 10-to-20 kWDC power range
- Open Access
- 7 February 2025
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 141, 1165-1171
Design, laboratory characterization, factory acceptance tests and installation of a 2.6 MW High temperature steam electrolyser in a refinery
- 7 February 2025
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 141, 1165-1171
Open AccessDesign, laboratory characterization, factory acceptance tests and installation of a 2.6 MW High temperature steam electrolyser in a refinery
- 21 February 2024
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 60, 531-539
Lifespan evaluation of two 30-cell electrolyte-supported stacks for hydrogen production by high temperature electrolysis
- 21 February 2024
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 60, 531-539
Lifespan evaluation of two 30-cell electrolyte-supported stacks for hydrogen production by high temperature electrolysis
- 8 December 2023
- Published by Wiley in Fuel Cells
- Vol. 23 (6) , 474-481
Solid oxide electrolysis stack development and upscaling
Solid oxide electrolysis is considered an efficient technology to produce hydrogen. To deploy electrolysers at the GW scale, an increase in the individual component size (cells and stacks in particular) is required. The integration of larger cells (200 cm2 active area) into 25‐cell stacks has been successfully performed. Performances were in the range of –0.8 to –0.9 A cm−2 at 1.3 V at 700°C. The number of cells has also been increased to 50 and 75 cells. For this latter 75‐cell stack, the assembly of three 25‐cell substacks was considered. Good gastightness and high performances were achieved, although connections between substacks add a serial resistance that affects the stack total performances. Nevertheless, a current density of more than –0.8 A cm−2 was obtained at 1.3 V and 700°C, consistent with individual substack performances. Finally, a stack made of 50 200 cm2 cells has been assembled. Although a stack deformation was visible due to individual component thickness scattering, a good gastighness was achieved and a current density of –0.9 A cm−2 at 1.3 V and 700°C was measured. The low voltage scattering highlighted a good homogeneity of the fluidic distribution and of the electrical contacts within the stack.
- 8 December 2023
- Published by Wiley in Fuel Cells
- Vol. 23 (6) , 474-481
Solid oxide electrolysis stack development and upscaling
Solid oxide electrolysis is considered an efficient technology to produce hydrogen. To deploy electrolysers at the GW scale, an increase in the individual component size (cells and stacks in particular) is required. The integration of larger cells (200 cm2 active area) into 25‐cell stacks has been successfully performed. Performances were in the range of –0.8 to –0.9 A cm−2 at 1.3 V at 700°C. The number of cells has also been increased to 50 and 75 cells. For this latter 75‐cell stack, the assembly of three 25‐cell substacks was considered. Good gastightness and high performances were achieved, although connections between substacks add a serial resistance that affects the stack total performances. Nevertheless, a current density of more than –0.8 A cm−2 was obtained at 1.3 V and 700°C, consistent with individual substack performances. Finally, a stack made of 50 200 cm2 cells has been assembled. Although a stack deformation was visible due to individual component thickness scattering, a good gastighness was achieved and a current density of –0.9 A cm−2 at 1.3 V and 700°C was measured. The low voltage scattering highlighted a good homogeneity of the fluidic distribution and of the electrical contacts within the stack.
- Open Access
- 3 October 2023
- Published by Wiley in Fuel Cells
- Vol. 23 (6) , 463-473
Benchmark study of performances and durability between different stack technologies for high temperature electrolysis
In the current landscape of high temperature electrolysis, mainly two solid oxide cell (SOC) technologies are being used: electrolyte‐supported and cathode‐supported SOCs. The geometrical differences, namely the thickness of the electrolyte, can lead to vastly different operating temperatures. Since most phenomena affecting performance and durability remain thermally activated, comparing stack technologies can be a difficult endeavor at best.While the most visible goal of the European project MultiPLHY consists of Sunfire GmbH building the first multi‐megawatt solid oxide electrolyzer, a work package is being dedicated to stack testing in a laboratory environment. A harmonized protocol was first elaborated to allow comparing different stack technologies. It includes the recording of performance maps, several galvanostatic steps in thermoneutral conditions, as well as load point and thermal cycles. Subsequently, Sunfire operated a pile‐up of two 30‐cell electrolyte‐supported stacks for over 8200 h, while a 25‐cell cathode‐supported stack was tested at CEA for 6800 h.The present article aims at presenting the findings gathered during the implementation of the protocol. This benchmark study puts forward performance maps as well as voltage and stack temperature profiles over time, and discusses some of the difficulties inherent to long‐term testing.
- 3 October 2023
- Published by Wiley in Fuel Cells
- Vol. 23 (6) , 463-473
Open AccessBenchmark study of performances and durability between different stack technologies for high temperature electrolysis
In the current landscape of high temperature electrolysis, mainly two solid oxide cell (SOC) technologies are being used: electrolyte‐supported and cathode‐supported SOCs. The geometrical differences, namely the thickness of the electrolyte, can lead to vastly different operating temperatures. Since most phenomena affecting performance and durability remain thermally activated, comparing stack technologies can be a difficult endeavor at best.While the most visible goal of the European project MultiPLHY consists of Sunfire GmbH building the first multi‐megawatt solid oxide electrolyzer, a work package is being dedicated to stack testing in a laboratory environment. A harmonized protocol was first elaborated to allow comparing different stack technologies. It includes the recording of performance maps, several galvanostatic steps in thermoneutral conditions, as well as load point and thermal cycles. Subsequently, Sunfire operated a pile‐up of two 30‐cell electrolyte‐supported stacks for over 8200 h, while a 25‐cell cathode‐supported stack was tested at CEA for 6800 h.The present article aims at presenting the findings gathered during the implementation of the protocol. This benchmark study puts forward performance maps as well as voltage and stack temperature profiles over time, and discusses some of the difficulties inherent to long‐term testing.
- Open Access
Comparison of the Electrochemical Performances of Solid Oxide Fuel Cells with Sputtered Thin Barrier Layers Fueled by Hydrogen or Ammonia
We investigated the influence of a fuel change from pure hydrogen to a hydrogen–ammonia mixture at different percentages on the electrochemical behavior of 50 mm in diameter Solid Oxide Fuel Cells (SOFCs) with sputtered thin buffer layers of Gd-doped ceria, varying the working temperatures from 800 °C to 650 °C. The results show that the performances of the cells are not affected by the fuel change for high working temperatures (800 °C and 750 °C). As an example, a power density value of 802 mW∙cm−2 at 1 A∙cm−2 is found when directly feeding the cell with 8 NmL∙min−1cm−2 of ammonia and with an equivalent flowrate of 12 NmL∙min−1cm−2 of H2. These power density output values are higher than those obtained in industrial state-of-art (SoA) SOFCs with screen-printed buffer layers fed with equivalent hydrogen flowrates, thanks to the improved electrochemical performances obtained in the case of cells with sputtered thin buffer layers of Gd-doped ceria. At lower working temperatures (700 °C and 650 °C), slight changes in the electrochemical behavior of the cells are observed. Nevertheless, in this temperature range, we also obtain an output current density value of 0.54 A∙cm−2 in a pure ammonia flowrate of 12 NmL min−1cm−2 at 800 mV and 700 °C, equal to the value observed in SoA button cells with industrial screen-printed GDC barrier layer fueled with 16 NmL∙min−1cm−2 of H2. These results pave the way towards the use of innovative SOFC structures with sputtered thin buffer layers fueled by ammonia.
Open AccessComparison of the Electrochemical Performances of Solid Oxide Fuel Cells with Sputtered Thin Barrier Layers Fueled by Hydrogen or Ammonia
We investigated the influence of a fuel change from pure hydrogen to a hydrogen–ammonia mixture at different percentages on the electrochemical behavior of 50 mm in diameter Solid Oxide Fuel Cells (SOFCs) with sputtered thin buffer layers of Gd-doped ceria, varying the working temperatures from 800 °C to 650 °C. The results show that the performances of the cells are not affected by the fuel change for high working temperatures (800 °C and 750 °C). As an example, a power density value of 802 mW∙cm−2 at 1 A∙cm−2 is found when directly feeding the cell with 8 NmL∙min−1cm−2 of ammonia and with an equivalent flowrate of 12 NmL∙min−1cm−2 of H2. These power density output values are higher than those obtained in industrial state-of-art (SoA) SOFCs with screen-printed buffer layers fed with equivalent hydrogen flowrates, thanks to the improved electrochemical performances obtained in the case of cells with sputtered thin buffer layers of Gd-doped ceria. At lower working temperatures (700 °C and 650 °C), slight changes in the electrochemical behavior of the cells are observed. Nevertheless, in this temperature range, we also obtain an output current density value of 0.54 A∙cm−2 in a pure ammonia flowrate of 12 NmL min−1cm−2 at 800 mV and 700 °C, equal to the value observed in SoA button cells with industrial screen-printed GDC barrier layer fueled with 16 NmL∙min−1cm−2 of H2. These results pave the way towards the use of innovative SOFC structures with sputtered thin buffer layers fueled by ammonia.
- Open Access
- 5 June 2023
- Published by MDPI AG in Preprints.org
Exploring Fuel Flexibility of Sputtered Thin Barrier Layers SOFC Cells: The Effect of Direct Ammonia Feeding on the Performances
We investigated the influence of the fuel change, from pure hydrogen to hydrogen-ammonia mixture at different percentage, on the electrochemical behaviour of 50 mm in diameter Solid Oxide Fuel Cells (SOFC) with sputtered thin buffer layers of Gd doped Ceria, varying the working temperatures from 800°C to 650°C. The results show that the performances of the cells are not affected by the fuel change for the high working temperatures (800°C and 750°C). As an example, a power density value of 802 mW∙cm-2 at 1 A∙cm-2 is found when directly feeding the cell with 8 Nml∙min-1cm-2 of ammonia and with an equivalent flowrate of 12 Nml∙min-1cm-2 of H2. These power density output values are comparable to those obtained in industrial State of Art (SoA) SOFC cells with screen printed buffer layers fed with higher hydrogen flowrates, thanks to the improved electrochemical performances obtained in the case of cells with sputtered thin buffer layers of Gd doped Ceria. At lower working temperatures (700°C and 650°C), slight changes in the electrochemical behaviour of the cells are observed. Nevertheless, also in this temperature range, we obtain an output current density value of 0.54 A∙cm-2 in pure ammonia flowrate of 12 Nml min-1cm-2, at 800 mV and 700°C, equal to the value observed in SoA button cells with industrial screen printed GDC barrier layer fuelled with 16 Nml∙min-1cm-2 of H2. These results pave the way towards the use of innovative SOFC structures with sputtered thin buffer layers fuelled by ammonia.
- 5 June 2023
- Published by MDPI AG in Preprints.org
Open AccessExploring Fuel Flexibility of Sputtered Thin Barrier Layers SOFC Cells: The Effect of Direct Ammonia Feeding on the Performances
We investigated the influence of the fuel change, from pure hydrogen to hydrogen-ammonia mixture at different percentage, on the electrochemical behaviour of 50 mm in diameter Solid Oxide Fuel Cells (SOFC) with sputtered thin buffer layers of Gd doped Ceria, varying the working temperatures from 800°C to 650°C. The results show that the performances of the cells are not affected by the fuel change for the high working temperatures (800°C and 750°C). As an example, a power density value of 802 mW∙cm-2 at 1 A∙cm-2 is found when directly feeding the cell with 8 Nml∙min-1cm-2 of ammonia and with an equivalent flowrate of 12 Nml∙min-1cm-2 of H2. These power density output values are comparable to those obtained in industrial State of Art (SoA) SOFC cells with screen printed buffer layers fed with higher hydrogen flowrates, thanks to the improved electrochemical performances obtained in the case of cells with sputtered thin buffer layers of Gd doped Ceria. At lower working temperatures (700°C and 650°C), slight changes in the electrochemical behaviour of the cells are observed. Nevertheless, also in this temperature range, we obtain an output current density value of 0.54 A∙cm-2 in pure ammonia flowrate of 12 Nml min-1cm-2, at 800 mV and 700°C, equal to the value observed in SoA button cells with industrial screen printed GDC barrier layer fuelled with 16 Nml∙min-1cm-2 of H2. These results pave the way towards the use of innovative SOFC structures with sputtered thin buffer layers fuelled by ammonia.