Arkady Gurin
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Arkady Gurin has a total of 7 co-authors. Here are the top co-authors by number of shared publications:
- Vasily Ivanovich Lyashenko
Ukrainian Research and Design-Intelligence Institute of Industrial Technology” , Zhovti Vody , Ukraine
4 shared publications - Viktor A. Shapovalov
Kryvyi Rih National University , Kryvyi Rih , Ukraine
3 shared publications GP «UkrNIPII promtekhnologii»
2 shared publicationsKrivoy Rog National University
2 shared publicationsV.A. Shapovalov
2 shared publicationsA.E. Lapshin
1 shared publication
Latest Publications
- Open Access
- 1 September 2024
- Published by Walter de Gruyter GmbH in Mining Revue
- Vol. 30 (3) , 30-42
Evaluation of Technologies and Technical Means for Using the Phenomenon of Natural Bischofite in the Field of Mining Industry and Ecology
Goal: Evaluation of technologies and technical means for the use of the phenomenon of the aqueous solution of natural bischophyte (RPB) in various branches of the national economy, in particular, the mining and mineral industry, ecology and medicine. Their use will improve the economic efficiency and environmental safety of the processes of blasting rock mass in quarries and storing waste from enrichment of ore raw materials in tailings storage facilities, freezing and freezing of ore mass during its transportation to enrichment plants. Research methods: During the study, systematization, and generalization of technologies and technical means of using RPB, the analysis of research and publications, the results of industrial and experimental research at landfills using standard and new methods with the participation of authors and leading specialists in the specified fields were used. Scientific novelty: The main scientific, practical and social results of the assessment of technologies and technical means for the use of the phenomenon of water RPB in various sectors of the national economy, in particular, in the mining industry, ecology and medicine, are given. The functional dependence between the freezing temperature of the mining mass (t с , °С) and the content of the aqueous solution of natural bischofite in it (С b , %) was established. Practical significance: The technology to prevent winter slippage on quarry roads using RPB has been developed and implemented. Recommendations are given for combating the release of dust during the transportation of rock mass by rail transport, during mass explosions in quarries, on quarry highways and on tailings piles of GZK, with the use of RPB and bitumen emulsion, which allow to effectively fix dust surfaces from blowing dust. To reduce dust emission into the atmosphere during mass blasts in quarries, it is proposed to wet the surface of drilling dust with RPB with a density of 1250 - 1270 kg / m 3 and a consumption of 4.5 - 5.0 l / m 2 . The results: When using RPB instead of water during blasting operations in quarries, BP costs are reduced by 1.4-1.5 times and emissions of harmful gases during blasting are reduced by 20-30%. In underground mining operations, when water is replaced with RPB for moistening BP granules, the release of gases during a mass explosion in the mine is reduced by 1.3-1.4 times. To prevent freezing or freezing of rock mass to the inner surface of open wagons during transportation in the cold, preventive treatment of the inner surface of RPB railway wagons is carried out. In order to prevent ice on highways in quarries, they are also pre-treated with RPB. The technology of preventing winter slippage and dusting of quarry roads with RPB reagents with the use of watering machines was developed and implemented in the conditions of PJSC "Southern GZK" (Kryvbas, Ukraine). Recommendations for fighting dust on highways, landfills and tailings storage facilities of GZK, using RPB and bitumen emulsion, which allow to effectively fix dusty surfaces from blowing dust, using specially developed equipment, are given. In particular, the cost of processing ragweed RPB with an average overgrowth density of 5.0 kg/m 2 at the current cost of the solution of UAH 960/ton does not exceed UAH 40 per 100 m 2 (acre). One of the promising areas of further research is the use of large volumes of man-made underground cavities, formed during the leaching of bischofite, for the storage of useful liquid substances or for the disposal of waste at a depth of more than 1500 m.
- 1 September 2024
- Published by Walter de Gruyter GmbH in Mining Revue
- Vol. 30 (3) , 30-42
Open AccessEvaluation of Technologies and Technical Means for Using the Phenomenon of Natural Bischofite in the Field of Mining Industry and Ecology
Goal: Evaluation of technologies and technical means for the use of the phenomenon of the aqueous solution of natural bischophyte (RPB) in various branches of the national economy, in particular, the mining and mineral industry, ecology and medicine. Their use will improve the economic efficiency and environmental safety of the processes of blasting rock mass in quarries and storing waste from enrichment of ore raw materials in tailings storage facilities, freezing and freezing of ore mass during its transportation to enrichment plants. Research methods: During the study, systematization, and generalization of technologies and technical means of using RPB, the analysis of research and publications, the results of industrial and experimental research at landfills using standard and new methods with the participation of authors and leading specialists in the specified fields were used. Scientific novelty: The main scientific, practical and social results of the assessment of technologies and technical means for the use of the phenomenon of water RPB in various sectors of the national economy, in particular, in the mining industry, ecology and medicine, are given. The functional dependence between the freezing temperature of the mining mass (t с , °С) and the content of the aqueous solution of natural bischofite in it (С b , %) was established. Practical significance: The technology to prevent winter slippage on quarry roads using RPB has been developed and implemented. Recommendations are given for combating the release of dust during the transportation of rock mass by rail transport, during mass explosions in quarries, on quarry highways and on tailings piles of GZK, with the use of RPB and bitumen emulsion, which allow to effectively fix dust surfaces from blowing dust. To reduce dust emission into the atmosphere during mass blasts in quarries, it is proposed to wet the surface of drilling dust with RPB with a density of 1250 - 1270 kg / m 3 and a consumption of 4.5 - 5.0 l / m 2 . The results: When using RPB instead of water during blasting operations in quarries, BP costs are reduced by 1.4-1.5 times and emissions of harmful gases during blasting are reduced by 20-30%. In underground mining operations, when water is replaced with RPB for moistening BP granules, the release of gases during a mass explosion in the mine is reduced by 1.3-1.4 times. To prevent freezing or freezing of rock mass to the inner surface of open wagons during transportation in the cold, preventive treatment of the inner surface of RPB railway wagons is carried out. In order to prevent ice on highways in quarries, they are also pre-treated with RPB. The technology of preventing winter slippage and dusting of quarry roads with RPB reagents with the use of watering machines was developed and implemented in the conditions of PJSC "Southern GZK" (Kryvbas, Ukraine). Recommendations for fighting dust on highways, landfills and tailings storage facilities of GZK, using RPB and bitumen emulsion, which allow to effectively fix dusty surfaces from blowing dust, using specially developed equipment, are given. In particular, the cost of processing ragweed RPB with an average overgrowth density of 5.0 kg/m 2 at the current cost of the solution of UAH 960/ton does not exceed UAH 40 per 100 m 2 (acre). One of the promising areas of further research is the use of large volumes of man-made underground cavities, formed during the leaching of bischofite, for the storage of useful liquid substances or for the disposal of waste at a depth of more than 1500 m.
- Open Access
- 1 June 2024
- Published by Walter de Gruyter GmbH in Mining Revue
- Vol. 30 (2) , 24-31
Research and Evaluation of Coal Mine Ventilation Management
The main scientific and practical results of the study and assessment of ventilation control in coal mines using the decomposition method based on data from the analysis of aerodynamic parameters of air distribution are presented. This will lead to increased safety and reduced accident rates in mining operations at coal mines. Methods of decomposition, statistical dynamics, set theory, fundamental laws of mining aerodynamics, and discrete mathematics are described. The studies were carried out based on the experimental data of the authors using various mathematical and statistical methods. A universal technique is proposed that can be used in mine workings for analysis, assessment of ventilation processes and associated aerodynamic factors, as well as optimization of the air distribution control system under various operating modes. A methodology and application software developed on its basis have been compiled. Automated geographic information systems such as GIS K-MINE® (Krivoy Rog, Ukraine) and VENTSIM are recommended. This system has been approved by regulatory authorities in Ukraine and is utilized by specialists from industry institutes, State Mining Supervision authorities, mines, and others. They are adapted for coal mines, ensuring increased safety and efficiency of work. This will ensure increased safety, labor protection, and reduced accident rates in coal mining operations.
- 1 June 2024
- Published by Walter de Gruyter GmbH in Mining Revue
- Vol. 30 (2) , 24-31
Open AccessResearch and Evaluation of Coal Mine Ventilation Management
The main scientific and practical results of the study and assessment of ventilation control in coal mines using the decomposition method based on data from the analysis of aerodynamic parameters of air distribution are presented. This will lead to increased safety and reduced accident rates in mining operations at coal mines. Methods of decomposition, statistical dynamics, set theory, fundamental laws of mining aerodynamics, and discrete mathematics are described. The studies were carried out based on the experimental data of the authors using various mathematical and statistical methods. A universal technique is proposed that can be used in mine workings for analysis, assessment of ventilation processes and associated aerodynamic factors, as well as optimization of the air distribution control system under various operating modes. A methodology and application software developed on its basis have been compiled. Automated geographic information systems such as GIS K-MINE® (Krivoy Rog, Ukraine) and VENTSIM are recommended. This system has been approved by regulatory authorities in Ukraine and is utilized by specialists from industry institutes, State Mining Supervision authorities, mines, and others. They are adapted for coal mines, ensuring increased safety and efficiency of work. This will ensure increased safety, labor protection, and reduced accident rates in coal mining operations.
- Open Access
- 1 March 2024
- Published by Walter de Gruyter GmbH in Mining Revue
- Vol. 30 (1) , 78-85
A Cleaning of Internal Surfaces of Bunkers Without the Presence of Operating Personnel Inside the Bunker
Bunkers are an integral part of the infrastructure of enterprises in various industries processing bulk materials. Corrosion processes and the formation of dust deposits on the internal surfaces of bunkers are irreversible and often lead to disruptions in the technological process and equipment performance parameters, and in some cases, to accidents. The stability and continuity of technological processes for processing bulk materials largely depend on the cleanliness of the internal surfaces of bunkers. Even the best technical characteristics of technological equipment only indicate the technical capabili-ties of the operation of technological lines. Their reliable and effective operation can be ensured by proper maintenance of the condition of internal surfaces and cleaning from corrosion and deposits. Increased dustiness, poor visibility, and confined spaces significantly complicate the conditions for performing work by service personnel inside bunkers. The enclosed space inside bunkers is a very dangerous place not intended for the work of service personnel. In order to avoid endangering ser-vice personnel and prevent people from entering the bunker, methods are proposed to easily, quickly, and, most importantly, safely clean the surfaces inside the bunkers.
- 1 March 2024
- Published by Walter de Gruyter GmbH in Mining Revue
- Vol. 30 (1) , 78-85
Open AccessA Cleaning of Internal Surfaces of Bunkers Without the Presence of Operating Personnel Inside the Bunker
Bunkers are an integral part of the infrastructure of enterprises in various industries processing bulk materials. Corrosion processes and the formation of dust deposits on the internal surfaces of bunkers are irreversible and often lead to disruptions in the technological process and equipment performance parameters, and in some cases, to accidents. The stability and continuity of technological processes for processing bulk materials largely depend on the cleanliness of the internal surfaces of bunkers. Even the best technical characteristics of technological equipment only indicate the technical capabili-ties of the operation of technological lines. Their reliable and effective operation can be ensured by proper maintenance of the condition of internal surfaces and cleaning from corrosion and deposits. Increased dustiness, poor visibility, and confined spaces significantly complicate the conditions for performing work by service personnel inside bunkers. The enclosed space inside bunkers is a very dangerous place not intended for the work of service personnel. In order to avoid endangering ser-vice personnel and prevent people from entering the bunker, methods are proposed to easily, quickly, and, most importantly, safely clean the surfaces inside the bunkers.
- 1 February 2022
- Published by STC Industry Safety CJSC in Occupational Safety in Industry
- No. 2
Improvement of Safety and Efficiency of Cleaning Settled Dust in the Premises of Mining and Processing Enterprises
The results of study are given concerning the issues of improving safety and efficiency of cleaning settled dust in the premises of mining and processing enterprises using a mobile autonomous dust collection unit. The following is used in the work: data from literary sources and patent documentation in the field of technologies and technical means to improve safety and efficiency of cleaning settled dust in the premises of mining and processing enterprises; substantiation of the parameters of the operational characteristics of a mobile autonomous dust collecting plant; laboratory and production experiments; physical modeling. It is shown that when cleaning dust from the metal structures, equipment, as well as covering their surfaces, two nozzles were used: for cleaning caked dust and a flattened pipe with a diameter of 25 mm. Cleaning speed of 1 m2 of metal structures was 1.6–1.9 min. It was found that on the horizontal and lateral surfaces, as well as on the floor, a nozzle with a slit length of 240 mm and a width of 4.3 mm showed good results. Cleaning speed with such a nozzle is 1.33–1.48 m2/min. When the concrete floor is uneven or the thickness of the dust layer increased to 5–8 mm, the cleaning speed decreased to 0.55 m2/min. The design of the dust collecting plant and its operation modes are proposed, which allow collecting up to 0.6 t/h of the settled dust. Dust content in the air in the crushing shop of the sorting plant of the Rodina mine (Krivoy Rog, Ukraine) after cleaning the settled dust decreased from 4.5 to 2.5 mg/m3. Economic calculations showed that in addition to the social effect of using a dust collecting plant, an additional economic effect is possible, obtained by recovery and return of the collected dust to the technological process. The results of industrial tests confirmed its high efficiency. For the conditions of its work at the crushing and sorting factory of the Rodina mine, the expected economic effect is 5960 UAH per year.
- 1 February 2022
- Published by STC Industry Safety CJSC in Occupational Safety in Industry
- No. 2
Improvement of Safety and Efficiency of Cleaning Settled Dust in the Premises of Mining and Processing Enterprises
The results of study are given concerning the issues of improving safety and efficiency of cleaning settled dust in the premises of mining and processing enterprises using a mobile autonomous dust collection unit. The following is used in the work: data from literary sources and patent documentation in the field of technologies and technical means to improve safety and efficiency of cleaning settled dust in the premises of mining and processing enterprises; substantiation of the parameters of the operational characteristics of a mobile autonomous dust collecting plant; laboratory and production experiments; physical modeling. It is shown that when cleaning dust from the metal structures, equipment, as well as covering their surfaces, two nozzles were used: for cleaning caked dust and a flattened pipe with a diameter of 25 mm. Cleaning speed of 1 m2 of metal structures was 1.6–1.9 min. It was found that on the horizontal and lateral surfaces, as well as on the floor, a nozzle with a slit length of 240 mm and a width of 4.3 mm showed good results. Cleaning speed with such a nozzle is 1.33–1.48 m2/min. When the concrete floor is uneven or the thickness of the dust layer increased to 5–8 mm, the cleaning speed decreased to 0.55 m2/min. The design of the dust collecting plant and its operation modes are proposed, which allow collecting up to 0.6 t/h of the settled dust. Dust content in the air in the crushing shop of the sorting plant of the Rodina mine (Krivoy Rog, Ukraine) after cleaning the settled dust decreased from 4.5 to 2.5 mg/m3. Economic calculations showed that in addition to the social effect of using a dust collecting plant, an additional economic effect is possible, obtained by recovery and return of the collected dust to the technological process. The results of industrial tests confirmed its high efficiency. For the conditions of its work at the crushing and sorting factory of the Rodina mine, the expected economic effect is 5960 UAH per year.
- 1 January 2021
- Published by STC Industry Safety CJSC in Occupational Safety in Industry
- No. 1
Improving Safety of the Aspiration and Ventilation Systems by Cleaning Air Ducts
Aspiration and ventilation systems are an integral part of the infrastructure of industrial enterprises in various sectors of the modern economy. Reliable and efficient operation of these systems directly depends on the cleanliness of the internal surfaces of the pipelines which are part of them. The processes of corrosion and formation of deposits on the pipelines internal surfaces are irreversible. They often lead to violating the modes and parameters of the aspiration and ventilation systems work, and in some cases — to the breakage of air ducts and their fall on the equipment and people. When studying, systematizing, and generalizing the methods of pipelines cleaning, the results were used related to the analysis of domestic and foreign scientific developments, targeted-oriented on-site investigations of the air ducts of aspiration and ventilation systems, as well as our own experimental studies conducted using standard and new original methods of leading experts in this field from around the world with their participation. The possibility and efficiency of using shock air waves generated by electric discharges from high-voltage sources to destroy rust and harmful deposits and separate them from the walls of air ducts were experimentally proved. It is scientifically justified that the introduction of the proposed method for cleaning the internal walls of air ducts significantly increases the reliability and efficiency of aspiration and ventilation systems used in various branches of industry, as well as expands their technological capabilities, allowing cleaning of the complex configuration pipelines. Promising areas are identified concerning further research of technologies and technical means for removing dust deposits and rust from the internal walls of the complex configuration pipelines of aspiration and ventilation systems.
- 1 January 2021
- Published by STC Industry Safety CJSC in Occupational Safety in Industry
- No. 1
Improving Safety of the Aspiration and Ventilation Systems by Cleaning Air Ducts
Aspiration and ventilation systems are an integral part of the infrastructure of industrial enterprises in various sectors of the modern economy. Reliable and efficient operation of these systems directly depends on the cleanliness of the internal surfaces of the pipelines which are part of them. The processes of corrosion and formation of deposits on the pipelines internal surfaces are irreversible. They often lead to violating the modes and parameters of the aspiration and ventilation systems work, and in some cases — to the breakage of air ducts and their fall on the equipment and people. When studying, systematizing, and generalizing the methods of pipelines cleaning, the results were used related to the analysis of domestic and foreign scientific developments, targeted-oriented on-site investigations of the air ducts of aspiration and ventilation systems, as well as our own experimental studies conducted using standard and new original methods of leading experts in this field from around the world with their participation. The possibility and efficiency of using shock air waves generated by electric discharges from high-voltage sources to destroy rust and harmful deposits and separate them from the walls of air ducts were experimentally proved. It is scientifically justified that the introduction of the proposed method for cleaning the internal walls of air ducts significantly increases the reliability and efficiency of aspiration and ventilation systems used in various branches of industry, as well as expands their technological capabilities, allowing cleaning of the complex configuration pipelines. Promising areas are identified concerning further research of technologies and technical means for removing dust deposits and rust from the internal walls of the complex configuration pipelines of aspiration and ventilation systems.