Hyeong Cheol Kang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Hyeong Cheol Kang has a total of 22 co-authors. Here are the top co-authors by number of shared publications:
- Jae-Joon Lee
Research Center for Photoenergy Harvesting & Conversion Technology (phct) Department of Energy & Materials Engineering Dongguk University Seoul Republic of Korea
7 shared publications Kicheon Yoo
Department of Energy & Materials Engineering and Research Center for Photoenergy Harvesting & Conversion Technology (phct), Dongguk University, Seoul, 04620, Republic of Korea
3 shared publicationsAshok Kumar Kaliamurthy
Research Center for Photoenergy Harvesting & Conversion Technology (phct), Department of Energy and Materials Engineering, Dongguk University, Seoul 04620, Republic of Korea
2 shared publications- Francis Kwaku Asiam
Research Center for Photoenergy Harvesting & Conversion Technology (phct) Department of Energy & Materials Engineering Dongguk University Seoul Republic of Korea
2 shared publications - Hemraj Mahipati Yadav
School of Nanoscience and Biotechnology, Shivaji University, Kolhapur, India
2 shared publications - Jae Won Shim
School of Electrical Engineering, Korea University, Seoul, Republic of Korea
2 shared publications
Latest Publications
- 8 April 2025
- Published by Royal Society of Chemistry (RSC) in Green Chemistry
- Vol. 27 (18) , 5163-5170
Selective oxidation of glucose to gluconic acid in aqueous media using dye-sensitized photoelectrochemical cells
Gluconic acid, a valuable product derived from glucose oxidation, is typically produced through electrochemical or chemical methods that are either costly or environmentally harmful. Dye-sensitized photoelectrochemical cells (DSPECs) offer a sustainable alternative for converting biomass into value-added chemicals. In this study, the selective oxidation of glucose to gluconic acid in aqueous medium is investigated for the first time using a DSPEC system. A metal-free and hydrophobic organic dye, (E)-3-(5-(4-(bis(2′,4′-dibutoxy-[1,1′-biphenyl]-4-yl)amino)phenyl)thiophen-2-yl)-2-cyanoacrylic acid (D35), is employed as a photosensitizer, with 4-acetamido-2,2,6,6-tetramethylpiperidine 1-oxyl (ACT) as the co-catalyst. ACT exhibits better catalytic activity and stability among organic radical mediators, driven by the effective generation of oxidizing oxoammonium species (ACT+) on the photoanode. The DSPEC system achieves 100% selectivity and faradaic efficiency for glucose conversion to gluconic acid, maintaining stability over 72 hours under 1 sun illumination at 0 V vs. NHE. This study establishes DSPEC as a sustainable and energy-efficient approach for gluconic acid production under ambient conditions.
- 8 April 2025
- Published by Royal Society of Chemistry (RSC) in Green Chemistry
- Vol. 27 (18) , 5163-5170
Selective oxidation of glucose to gluconic acid in aqueous media using dye-sensitized photoelectrochemical cells
Gluconic acid, a valuable product derived from glucose oxidation, is typically produced through electrochemical or chemical methods that are either costly or environmentally harmful. Dye-sensitized photoelectrochemical cells (DSPECs) offer a sustainable alternative for converting biomass into value-added chemicals. In this study, the selective oxidation of glucose to gluconic acid in aqueous medium is investigated for the first time using a DSPEC system. A metal-free and hydrophobic organic dye, (E)-3-(5-(4-(bis(2′,4′-dibutoxy-[1,1′-biphenyl]-4-yl)amino)phenyl)thiophen-2-yl)-2-cyanoacrylic acid (D35), is employed as a photosensitizer, with 4-acetamido-2,2,6,6-tetramethylpiperidine 1-oxyl (ACT) as the co-catalyst. ACT exhibits better catalytic activity and stability among organic radical mediators, driven by the effective generation of oxidizing oxoammonium species (ACT+) on the photoanode. The DSPEC system achieves 100% selectivity and faradaic efficiency for glucose conversion to gluconic acid, maintaining stability over 72 hours under 1 sun illumination at 0 V vs. NHE. This study establishes DSPEC as a sustainable and energy-efficient approach for gluconic acid production under ambient conditions.
- 26 January 2024
- Published by Royal Society of Chemistry (RSC) in Sustainable Energy & Fuels
- Vol. 8 (6) , 1245-1254
Chemical sintering by chlorinated carbon compounds for flexible photoanodes of dye-sensitized photovoltaic cells
Novel binary solvent mixtures of chlorinated carbon compounds (CCs = CCl 4 , CHCl 3 , and C 2 Cl 4 ) and 1-octanol are used to prepare pastes of TiO 2 nanoparticles (NPs), facilitating the formation of TiO 2 mesoporous films for flexible photoanodes.
- 26 January 2024
- Published by Royal Society of Chemistry (RSC) in Sustainable Energy & Fuels
- Vol. 8 (6) , 1245-1254
Chemical sintering by chlorinated carbon compounds for flexible photoanodes of dye-sensitized photovoltaic cells
Novel binary solvent mixtures of chlorinated carbon compounds (CCs = CCl 4 , CHCl 3 , and C 2 Cl 4 ) and 1-octanol are used to prepare pastes of TiO 2 nanoparticles (NPs), facilitating the formation of TiO 2 mesoporous films for flexible photoanodes.
- 1 October 2021
- Published by Elsevier in Dyes and Pigments
- Vol. 194
Recent developments in dye-sensitized photovoltaic cells under ambient illumination
- 1 October 2021
- Published by Elsevier in Dyes and Pigments
- Vol. 194
Recent developments in dye-sensitized photovoltaic cells under ambient illumination
- 1 October 2021
- Published by Elsevier in Dyes and Pigments
- Vol. 194
Cosensitization of metal-based dyes for high-performance dye-sensitized photovoltaics under ambient lighting conditions
- 1 October 2021
- Published by Elsevier in Dyes and Pigments
- Vol. 194
Cosensitization of metal-based dyes for high-performance dye-sensitized photovoltaics under ambient lighting conditions
- Open Access
- 8 July 2021
- Published by Frontiers Media SA in Frontiers in Chemistry
- Vol. 9
Preliminary Investigation on Vacancy Filling by Small Molecules on the Performance of Dye-Sensitized Solar Cells: The Case of a Type-II Absorber
The steric shielding offered by sensitizers on semiconducting surfaces as a result of branching in the dyes used offers the less utilization of semiconducting substrate sites during device fabrication in dye-sensitized solar cells (DSSCs). This work proposes a strategy to increase the coverage through the utilization of small molecules which have the ability to penetrate into the sites. The small molecules play the dual role of vacancy filling and sensitization, which can be viewed as an alternative to co-sensitization also. Hence, we show for the first time ever that the co-adsorption of catechol with Z907 as a sensitizer enhances the electron density in the photo-anode by adsorbing on the vacant sites. Catechol was subsequently adsorbed on TiO2 after Z907 as it has a stronger interaction with TiO2 owing to its favorable thermodynamics. The reduced number of vacant sites, suppressed charge recombination, and enhanced spectral response are responsible for the improvement in the PCEs. Quantitatively, both organic and aqueous electrolytes were used and the co-sensitized DSSCs had PCE enhancements of 7.2 and 60%, respectively, compared to the control devices.
- 8 July 2021
- Published by Frontiers Media SA in Frontiers in Chemistry
- Vol. 9
Open AccessPreliminary Investigation on Vacancy Filling by Small Molecules on the Performance of Dye-Sensitized Solar Cells: The Case of a Type-II Absorber
The steric shielding offered by sensitizers on semiconducting surfaces as a result of branching in the dyes used offers the less utilization of semiconducting substrate sites during device fabrication in dye-sensitized solar cells (DSSCs). This work proposes a strategy to increase the coverage through the utilization of small molecules which have the ability to penetrate into the sites. The small molecules play the dual role of vacancy filling and sensitization, which can be viewed as an alternative to co-sensitization also. Hence, we show for the first time ever that the co-adsorption of catechol with Z907 as a sensitizer enhances the electron density in the photo-anode by adsorbing on the vacant sites. Catechol was subsequently adsorbed on TiO2 after Z907 as it has a stronger interaction with TiO2 owing to its favorable thermodynamics. The reduced number of vacant sites, suppressed charge recombination, and enhanced spectral response are responsible for the improvement in the PCEs. Quantitatively, both organic and aqueous electrolytes were used and the co-sensitized DSSCs had PCE enhancements of 7.2 and 60%, respectively, compared to the control devices.
- Open Access
- 29 April 2021
- Published by MDPI AG in Chemosensors
- Vol. 9 (5) , 98
Recent Development in Nanomaterial-Based Electrochemical Sensors for Cholesterol Detection
Functional nanomaterials have attracted significant attention in a variety of research fields (in particular, in the healthcare system) because of the easily controllable morphology, their high chemical and environmental stability, biocompatibility, and unique optoelectronic and sensing properties. The sensing properties of nanomaterials can be used to detect biomolecules such as cholesterol. Over the past few decades, remarkable progress has been made in the production of cholesterol biosensors that contain nanomaterials as the key component. In this article, various nanomaterials for the electrochemical sensing of cholesterol were reviewed. Cholesterol biosensors are recognized tools in the clinical diagnosis of cardiovascular diseases (CVDs). The function of nanomaterials in cholesterol biosensors were thoroughly discussed. In this study, different pathways for the sensing of cholesterol with functional nanomaterials were investigated.
- 29 April 2021
- Published by MDPI AG in Chemosensors
- Vol. 9 (5) , 98
Open AccessRecent Development in Nanomaterial-Based Electrochemical Sensors for Cholesterol Detection
Functional nanomaterials have attracted significant attention in a variety of research fields (in particular, in the healthcare system) because of the easily controllable morphology, their high chemical and environmental stability, biocompatibility, and unique optoelectronic and sensing properties. The sensing properties of nanomaterials can be used to detect biomolecules such as cholesterol. Over the past few decades, remarkable progress has been made in the production of cholesterol biosensors that contain nanomaterials as the key component. In this article, various nanomaterials for the electrochemical sensing of cholesterol were reviewed. Cholesterol biosensors are recognized tools in the clinical diagnosis of cardiovascular diseases (CVDs). The function of nanomaterials in cholesterol biosensors were thoroughly discussed. In this study, different pathways for the sensing of cholesterol with functional nanomaterials were investigated.
- Open Access
- 4 February 2021
- Published by MDPI AG in Nanomaterials
- Vol. 11 (2) , 395
Cellulose Nanofiber Composite with Bimetallic Zeolite Imidazole Framework for Electrochemical Supercapacitors
Cellulose nanofiber (CNF) and hybrid zeolite imidazole framework (HZ) are an emerging biomaterial and a porous carbonous material, respectively. The composite of these two materials could have versatile physiochemical characteristics. A cellulose nanofiber and cobalt-containing zeolite framework-based composite was prepared using an in-situ and eco-friendly chemical method followed by pyrolysis. The composite was comprised of cobalt nanoparticles decorated on highly graphitized N-doped nanoporous carbons (NPC) wrapped with carbon nanotubes (CNTs) produced from the direct carbonization of HZ. By varying the ratio of CNF in the composite, we determined the optimal concentration and characterized the derived samples using sophisticated techniques. Scanning electron microscopy (SEM), X-ray diffraction analysis (XRD), and X-ray photoelectron spectroscopy (XPS) confirmed the functionalization of CNF in the metallic cobalt-covered N-doped NPC wrapped with CNTs. The CNF–HZNPC composite electrodes show superior electrochemical performance, which is suitable for supercapacitor applications; its specific capacitance is 146 F/g at 1 A/g. Furthermore, the composite electrodes retain a cycling stability of about 90% over 2000 charge–discharge cycles at 10 A/g. The superior electrochemical properties of the cellulose make it a promising candidate for developing electrodes for energy storage applications.
- 4 February 2021
- Published by MDPI AG in Nanomaterials
- Vol. 11 (2) , 395
Open AccessCellulose Nanofiber Composite with Bimetallic Zeolite Imidazole Framework for Electrochemical Supercapacitors
Cellulose nanofiber (CNF) and hybrid zeolite imidazole framework (HZ) are an emerging biomaterial and a porous carbonous material, respectively. The composite of these two materials could have versatile physiochemical characteristics. A cellulose nanofiber and cobalt-containing zeolite framework-based composite was prepared using an in-situ and eco-friendly chemical method followed by pyrolysis. The composite was comprised of cobalt nanoparticles decorated on highly graphitized N-doped nanoporous carbons (NPC) wrapped with carbon nanotubes (CNTs) produced from the direct carbonization of HZ. By varying the ratio of CNF in the composite, we determined the optimal concentration and characterized the derived samples using sophisticated techniques. Scanning electron microscopy (SEM), X-ray diffraction analysis (XRD), and X-ray photoelectron spectroscopy (XPS) confirmed the functionalization of CNF in the metallic cobalt-covered N-doped NPC wrapped with CNTs. The CNF–HZNPC composite electrodes show superior electrochemical performance, which is suitable for supercapacitor applications; its specific capacitance is 146 F/g at 1 A/g. Furthermore, the composite electrodes retain a cycling stability of about 90% over 2000 charge–discharge cycles at 10 A/g. The superior electrochemical properties of the cellulose make it a promising candidate for developing electrodes for energy storage applications.
- Open Access
- 1 February 2021
- Published by The Electrochemical Society in ECS Journal of Solid State Science and Technology
- Vol. 10 (2) , 025007
Binary Redox Couples for Highly Transparent and High-Voltage Dye-Sensitized Solar Cells
The conventional iodine-based (I−/I3 −) electrolyte used in dye-sensitized solar cells (DSSCs) presents several limitations, such as ∼30% absorption of visible light in the wavelength range of 300–500 nm and a large potential difference between the Fermi level of I−/I3 − and the HOMO level of the dye. This has a negative impact on the characteristics of DSSC such as transparency and open circuit voltage (Voc). In the present work, a series of transparent electrolytes are prepared using various additives such as I2, LiI, guanidine thiocyanate/guanidine nitrate (GuSCN/GuNO3), and Br2 to obtain highly transparent and high voltage DSSCs. The results demonstrate that the usage of the optimized electrolyte consisting of 0.003 M Br2, 0.01 M LiI, and 0.1 M GuNO3, with the binary redox couple (I−, Br−)/(I3 −, I2Br−), contributes to an ∼25% increase in transmittance compared to that of the conventional electrolyte, while the concentration of I3 − is significantly reduced. Furthermore, the downward shift in the Fermi level of the binary redox system is shown to provide an ∼100 mV enhancement in the Voc of the DSSC compared with that of the conventional electrolyte based DSSC. In addition, the devices with the optimized binary redox system achieve a power conversion efficiency of ∼7.94% which is closely comparable to the performance of conventional (I−/I3 −) electrolyte-based DSSCs. Thus, the present study could provide immense insights toward the fabrication of high-voltage and transparent DSSCs for the application in transparent photovoltaic windows. Furthermore, by using a binary redox electrolyte, the DSSCs that operative under a 2000 lux compact fluorescent lamp (CFL) were also successfully fabricated and yielded a promising efficiency of 23.6%.
- 1 February 2021
- Published by The Electrochemical Society in ECS Journal of Solid State Science and Technology
- Vol. 10 (2) , 025007
Open AccessBinary Redox Couples for Highly Transparent and High-Voltage Dye-Sensitized Solar Cells
The conventional iodine-based (I−/I3 −) electrolyte used in dye-sensitized solar cells (DSSCs) presents several limitations, such as ∼30% absorption of visible light in the wavelength range of 300–500 nm and a large potential difference between the Fermi level of I−/I3 − and the HOMO level of the dye. This has a negative impact on the characteristics of DSSC such as transparency and open circuit voltage (Voc). In the present work, a series of transparent electrolytes are prepared using various additives such as I2, LiI, guanidine thiocyanate/guanidine nitrate (GuSCN/GuNO3), and Br2 to obtain highly transparent and high voltage DSSCs. The results demonstrate that the usage of the optimized electrolyte consisting of 0.003 M Br2, 0.01 M LiI, and 0.1 M GuNO3, with the binary redox couple (I−, Br−)/(I3 −, I2Br−), contributes to an ∼25% increase in transmittance compared to that of the conventional electrolyte, while the concentration of I3 − is significantly reduced. Furthermore, the downward shift in the Fermi level of the binary redox system is shown to provide an ∼100 mV enhancement in the Voc of the DSSC compared with that of the conventional electrolyte based DSSC. In addition, the devices with the optimized binary redox system achieve a power conversion efficiency of ∼7.94% which is closely comparable to the performance of conventional (I−/I3 −) electrolyte-based DSSCs. Thus, the present study could provide immense insights toward the fabrication of high-voltage and transparent DSSCs for the application in transparent photovoltaic windows. Furthermore, by using a binary redox electrolyte, the DSSCs that operative under a 2000 lux compact fluorescent lamp (CFL) were also successfully fabricated and yielded a promising efficiency of 23.6%.