Boris Nikolaevich Guzanov
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Boris Nikolaevich Guzanov has a total of 30 co-authors. Here are the top co-authors by number of shared publications:
- Natalia B. Pugacheva
Russian Acad Sci, Inst Engn Sci, Ural Branch, 34 Komsomolskaya Str, Ekaterinburg 620049, Russia
8 shared publications - Sv Anakhov
Russian State Vocational Pedagogical University
7 shared publications - A. V. Matushkin
Ural Federal University named after the first President of Russia B. N. Yeltsin
5 shared publications Russian State Vocational Pedagogical University
3 shared publications- Татьяна Михайловна Быкова
Russian Acad Sci, Inst Engn Sci, Ural Branch, 34 Komsomolskaya Str, Ekaterinburg 620049, Russia
3 shared publications - Evgeniy Slukin
Novosibirsk State Technical University
2 shared publications
Latest Publications
- 8 January 2026
- Published by National University of Science and Technology MISiS in Izvestiya Vuzov. Tsvetnaya Metallurgiya (Proceedings of Higher Schools. Nonferrous Metallurgy)
- No. 4,p. 50-61
Influence of plasma narrow-jet cutting parameters on the weld quality during laser welding of titanium alloys
The study investigates the structural and mechanical characteristics of permanent joints produced by laser welding of VT1-0/VT1-0 titanium alloys after cutting with a newly designed PMVR-5.3 narrow-jet plasma torch, which features a gas-dynamic stabilization (GDS) system with several design innovations. The improved GDS efficiency enhances cutting precision and surface quality, thereby increasing the radiation absorption coefficient, weld penetration, and overall laser-welding efficiency. Experimental results show that continuous-wave CO2 laser welding of VT1-0/VT1-0 plates forms a narrow weld with a structure corresponding to the as-cast state of the alloy and large equiaxed grains in the central part of the weld, which decrease in size toward the root compared with those in the surface region. Although gas shielding does not completely prevent the formation of fine micropores in the weld metal, their amount is insignificant; they do not form critical clusters within the microvolumes of the weld and have no adverse effect on the strength characteristics of the welded joint. The average microhardness of the weld metal was found to be higher than that of the base metal. According to tensile and microhardness testing, the weld metal demonstrates high strength, significantly exceeding that of the titanium alloy, and exhibits a ductile fracture morphology. Under cyclic loading, fracture occurred in the base metal rather than in the weld metal, with the fraction of the final rupture zones increasing as the maximum cyclic stress rose. The findings confirm the applicability of precision narrow-jet air-plasma cutting and continuous-wave CO2 laser welding technologies for producing VT1-0/VT1-0 welded joints with high efficiency and mechanical strength comparable to those of the base material.
- 8 January 2026
- Published by National University of Science and Technology MISiS in Izvestiya Vuzov. Tsvetnaya Metallurgiya (Proceedings of Higher Schools. Nonferrous Metallurgy)
- No. 4,p. 50-61
Influence of plasma narrow-jet cutting parameters on the weld quality during laser welding of titanium alloys
The study investigates the structural and mechanical characteristics of permanent joints produced by laser welding of VT1-0/VT1-0 titanium alloys after cutting with a newly designed PMVR-5.3 narrow-jet plasma torch, which features a gas-dynamic stabilization (GDS) system with several design innovations. The improved GDS efficiency enhances cutting precision and surface quality, thereby increasing the radiation absorption coefficient, weld penetration, and overall laser-welding efficiency. Experimental results show that continuous-wave CO2 laser welding of VT1-0/VT1-0 plates forms a narrow weld with a structure corresponding to the as-cast state of the alloy and large equiaxed grains in the central part of the weld, which decrease in size toward the root compared with those in the surface region. Although gas shielding does not completely prevent the formation of fine micropores in the weld metal, their amount is insignificant; they do not form critical clusters within the microvolumes of the weld and have no adverse effect on the strength characteristics of the welded joint. The average microhardness of the weld metal was found to be higher than that of the base metal. According to tensile and microhardness testing, the weld metal demonstrates high strength, significantly exceeding that of the titanium alloy, and exhibits a ductile fracture morphology. Under cyclic loading, fracture occurred in the base metal rather than in the weld metal, with the fraction of the final rupture zones increasing as the maximum cyclic stress rose. The findings confirm the applicability of precision narrow-jet air-plasma cutting and continuous-wave CO2 laser welding technologies for producing VT1-0/VT1-0 welded joints with high efficiency and mechanical strength comparable to those of the base material.
- Open Access
- 6 November 2025
- Published by State Public Scientific Technological Library SB RAS in Professional Education in the Modern World
- Vol. 15 (3) , 543-552
Postgraduate training of metrology experts using technology of professional reflection
Introduction . The technical upgrading of industrial enterprises is currently being undertaken on a broad front, aimed at producing reliable, knowledge-intensive products that meet high regulatory and technical requirements, international quality standards and consumer demands. The development and effective use of such high-tech equipment places high demands on professionals who are willing and able to take active and qualified part in this kind of engineering activities. In particular, the level of training of highly qualified metrologists responsible for evaluating design-related technical solutions to achieve the required quality of products was highlighted. Purpose setting . Therefore, the aim of the study was to justify the application of professional reflection technologies in the improvement of the skills of metrologists with a view to preparing them for expert activities. Methodology and methodology of the study . When preparing the data of the article a number of theoretical methods of research were used, including analysis of subject area, content-analysis of scientific publications. Results . The article considers the main reflexive learning technologies that contribute to the professional development of metrology experts, shows their influence on the development of critical thinking, ability to make informed decisions independently in the context of dynamically changing industry requirements. Conclusion . The results obtained have become the main basis for developing recommendations to improve educational programs using technologies of professional reflection, which in turn can have a positive impact on the level of metrology experts who can respond to the challenges of modern production.
- 6 November 2025
- Published by State Public Scientific Technological Library SB RAS in Professional Education in the Modern World
- Vol. 15 (3) , 543-552
Open AccessPostgraduate training of metrology experts using technology of professional reflection
Introduction . The technical upgrading of industrial enterprises is currently being undertaken on a broad front, aimed at producing reliable, knowledge-intensive products that meet high regulatory and technical requirements, international quality standards and consumer demands. The development and effective use of such high-tech equipment places high demands on professionals who are willing and able to take active and qualified part in this kind of engineering activities. In particular, the level of training of highly qualified metrologists responsible for evaluating design-related technical solutions to achieve the required quality of products was highlighted. Purpose setting . Therefore, the aim of the study was to justify the application of professional reflection technologies in the improvement of the skills of metrologists with a view to preparing them for expert activities. Methodology and methodology of the study . When preparing the data of the article a number of theoretical methods of research were used, including analysis of subject area, content-analysis of scientific publications. Results . The article considers the main reflexive learning technologies that contribute to the professional development of metrology experts, shows their influence on the development of critical thinking, ability to make informed decisions independently in the context of dynamically changing industry requirements. Conclusion . The results obtained have become the main basis for developing recommendations to improve educational programs using technologies of professional reflection, which in turn can have a positive impact on the level of metrology experts who can respond to the challenges of modern production.
- Open Access
- 10 December 2023
- Published by Vocational education and labour market in Vocational education and labour market
- Vol. 11 (4(55)) , 77-92
Professional standard – Federal state educational standard – Employers’ requirements: Сontradictions and ways toovercome them in the training of metrological service specialists
Введение. Подготовка кадров в области управления качеством, соответствующих квалификационным запросам работодателей, вряд ли возможна исключительно в рамках действующих бакалаврских и магистерских программ. И причина здесь не только и не столько в несоответствии образовательных стандартов квалификационным требованиям, а скорее в специфике деятельности специалиста-метролога, для овладения которой требуется особая образовательная траектория. Цель – на основе анализа взаимосвязи профессионального и образовательного стандартов и в соответствии с запросами работодателей выявить подходы и к формированию актуальных квалификационных требований к инженеру по метрологии. Методы. В качестве методологического подхода к определению состава и структуры квалификационных характеристик инженеров-метрологов использована таксонометрия Б. Блума, а основным методом исследования стал контент-анализ научных публикаций авторов, изучающих опыт сопряжения профессиональных и образовательных стандартов и нормативно-технической документации, регулирующей деятельность метрологов, дополненный анализом эмпирических данных, полученных в результате анкетирования экспертов-практиков. Результаты. Определены различия в подходах к определению структуры и содержания профессиональных характеристик выпускников высшей школы и требованиях, описанных в профессиональном стандарте. Обозначена роль специальных образовательных программ дополнительной профессиональной подготовки в формировании траектории повышения квалификации и становления востребованного специалиста-метролога. Показано, что сопряжение запросов работодателей и образовательных результатов подготовки специалистов по метрологии необходимо в целях повышения как уровня проектного качества разрабатываемой продукции, с одной стороны, так и формирования востребованных специалистов в области метрологии – с другой. Научная новизна. Выявлены различия квалификационных требований к метрологам со стороны рынка труда и образовательных результатов, установленных ФГОС, в рамках которых осуществляется подготовка бакалавров и магистров по направлению «Стандартизация и метрология». Сформулировано понимание аналитической экспертной деятельности специалиста по метрологии. Практическая значимость. Представленная в статье схема взаимосвязи компонентов образовательного пространства и запросов рынка труда может быть использована при определении состава и содержания общепрофессиональных и специализированных компетенций специалистов-метрологов для экспертной деятельности с учетом особенностей и специфики производств. Introduction. Training in the field of quality management, meeting the qualification requirements of employers, is unlikely to be possible solely within the framework of existing BA and MA programmes. And the reason here lies not only, and not so much, in the mismatch of educational standards to qualification requirements, but rather in the specificity of the activities of a metrology specialist, for mastering which a special educational trajectory is required. The aim of the study isto identify approaches to the formation of qualification requirements for an engineer in metrology based on an analysis of the relationship between professional and educational standards and in accordance with the requests of employers. Methods. As a methodological approach to determining the composition and structure of qualification characteristics of metrologists, the taxonomy of B.Bloom was used, and the main method of research was the content analysis of scientific publications of authors studying the experience of combining professional and educational standards and regulatory and technical documentation regulating the activities of metrologists, supplemented by an analysis of empirical...
- 10 December 2023
- Published by Vocational education and labour market in Vocational education and labour market
- Vol. 11 (4(55)) , 77-92
Open AccessProfessional standard – Federal state educational standard – Employers’ requirements: Сontradictions and ways toovercome them in the training of metrological service specialists
Введение. Подготовка кадров в области управления качеством, соответствующих квалификационным запросам работодателей, вряд ли возможна исключительно в рамках действующих бакалаврских и магистерских программ. И причина здесь не только и не столько в несоответствии образовательных стандартов квалификационным требованиям, а скорее в специфике деятельности специалиста-метролога, для овладения которой требуется особая образовательная траектория. Цель – на основе анализа взаимосвязи профессионального и образовательного стандартов и в соответствии с запросами работодателей выявить подходы и к формированию актуальных квалификационных требований к инженеру по метрологии. Методы. В качестве методологического подхода к определению состава и структуры квалификационных характеристик инженеров-метрологов использована таксонометрия Б. Блума, а основным методом исследования стал контент-анализ научных публикаций авторов, изучающих опыт сопряжения профессиональных и образовательных стандартов и нормативно-технической документации, регулирующей деятельность метрологов, дополненный анализом эмпирических данных, полученных в результате анкетирования экспертов-практиков. Результаты. Определены различия в подходах к определению структуры и содержания профессиональных характеристик выпускников высшей школы и требованиях, описанных в профессиональном стандарте. Обозначена роль специальных образовательных программ дополнительной профессиональной подготовки в формировании траектории повышения квалификации и становления востребованного специалиста-метролога. Показано, что сопряжение запросов работодателей и образовательных результатов подготовки специалистов по метрологии необходимо в целях повышения как уровня проектного качества разрабатываемой продукции, с одной стороны, так и формирования востребованных специалистов в области метрологии – с другой. Научная новизна. Выявлены различия квалификационных требований к метрологам со стороны рынка труда и образовательных результатов, установленных ФГОС, в рамках которых осуществляется подготовка бакалавров и магистров по направлению «Стандартизация и метрология». Сформулировано понимание аналитической экспертной деятельности специалиста по метрологии. Практическая значимость. Представленная в статье схема взаимосвязи компонентов образовательного пространства и запросов рынка труда может быть использована при определении состава и содержания общепрофессиональных и специализированных компетенций специалистов-метрологов для экспертной деятельности с учетом особенностей и специфики производств. Introduction. Training in the field of quality management, meeting the qualification requirements of employers, is unlikely to be possible solely within the framework of existing BA and MA programmes. And the reason here lies not only, and not so much, in the mismatch of educational standards to qualification requirements, but rather in the specificity of the activities of a metrology specialist, for mastering which a special educational trajectory is required. The aim of the study isto identify approaches to the formation of qualification requirements for an engineer in metrology based on an analysis of the relationship between professional and educational standards and in accordance with the requests of employers. Methods. As a methodological approach to determining the composition and structure of qualification characteristics of metrologists, the taxonomy of B.Bloom was used, and the main method of research was the content analysis of scientific publications of authors studying the experience of combining professional and educational standards and regulatory and technical documentation regulating the activities of metrologists, supplemented by an analysis of empirical...
- Open Access
- 12 October 2023
- Published by Russian State Vocational Pedagogical University in The Education and science journal
- Vol. 25 (8) , 12-48-48
Engineering thinking: Vectors of development in the context of the transformation of the scientific picture of the world
Introduction. Considerable attention is paid to the training of highly qualified engineering personnel today. But the ongoing processes of convergence, the emergence of end-to-end technologies radically change not only the technological platform of production, but lead to changes in the scientific picture of the world, which directly affects the nature of engineering thinking, expanding its range far beyond the technical sphere. Without the understanding of the features of modern engineering thinking, it is impossible to design the content and forms of education for future engineers. Actively ongoing processes of technological transformation in the education system give rise to a situation of uncertainty, and the desire to respond to emerging challenges, most often, is expressed in disparate, local educational solutions, if they are not based on scientifically sound conceptual models of personnel training.Aim. The present research aims to form a systematic understanding of the structure of engineering thinking and identify the trends of its transformation in the context of changes in the scientific picture of the world.Methodology and research methods. Theoretical and methodological analysis was based on the philosophical methodology of science, which made it possible to single out the main general scientific approaches in understanding the essence of engineering thinking and to consider the influence of the modern transforming scientific picture of the world on the structures of thinking in engineering activities. On the basis of the case study method, a reconstruction and analysis of typical situations encountered in the practice of training engineers and developing educational programmes was carried out to demonstrate the significance of the theoretical and methodological results obtained. The case study was used as a method of scientific research, which has its advantages over other empirical methods in the area under study.Results. The main methodological approaches in understanding engineering thinking are identified and analysed: practice-oriented, phenomenological, conceptual, and contextual. A systemic model of engineering thinking is substantiated, including three levels: technological (mental activity, technologies of thinking); regulatory-target (scientific picture of the world, paradigms, style of thinking, etc.); value-semantic (value attitudes, positions, ideals, norms, strategic priorities, semantic patterns). Typical cases that are encountered in the practice of training engineering personnel are analysed. It is shown how the changes in the scientific picture of the world and methodological reflexive analysis allow the strategies for designing educational programmes to be adjusted. The influence of the modern convergent environment on the formation of value-semantic and regulatory-target structures of engineering thinking and on the forms of the engineer’s mental activity is revealed. Innovative models for the training of future engineers are presented (on the example of the Russian State Vocational Pedagogical University), focused on the methodological approaches presented in the article to understanding engineering thinking.Scientific novelty. The novelty of the proposed research is determined by the expansion of the theoretical and methodological framework for considering engineering thinking and the vectors of its development. The issues of the development of engineering thinking are most often discussed within the framework of technological development or in the logic of intra-professional transformations; the authors of the current study rely on a systematic vision of scientific and engineering activities. This made it possible to introduce into the field of scientific consideration of engineering thinking and engineering activities such regulatory epistemological structures as the scientific picture of the world, paradigm, style of thinking, etc., as well as value-semantic structures of thinking and activity (value attitudes, ideals, standards activities, norms, strategic priorities, semantic patterns, etc.). In theoretical terms, the study is important for overcoming narrow technological and technocratic approaches, for a reasonable etermination of the prospects for the development of engineering thinking in the conditions of convergent processes.Practical significance. The practical significance of the study is the determination of the methodological foundations for the practice of decision-making in the field of engineering training.
- 12 October 2023
- Published by Russian State Vocational Pedagogical University in The Education and science journal
- Vol. 25 (8) , 12-48-48
Open AccessEngineering thinking: Vectors of development in the context of the transformation of the scientific picture of the world
Introduction. Considerable attention is paid to the training of highly qualified engineering personnel today. But the ongoing processes of convergence, the emergence of end-to-end technologies radically change not only the technological platform of production, but lead to changes in the scientific picture of the world, which directly affects the nature of engineering thinking, expanding its range far beyond the technical sphere. Without the understanding of the features of modern engineering thinking, it is impossible to design the content and forms of education for future engineers. Actively ongoing processes of technological transformation in the education system give rise to a situation of uncertainty, and the desire to respond to emerging challenges, most often, is expressed in disparate, local educational solutions, if they are not based on scientifically sound conceptual models of personnel training.Aim. The present research aims to form a systematic understanding of the structure of engineering thinking and identify the trends of its transformation in the context of changes in the scientific picture of the world.Methodology and research methods. Theoretical and methodological analysis was based on the philosophical methodology of science, which made it possible to single out the main general scientific approaches in understanding the essence of engineering thinking and to consider the influence of the modern transforming scientific picture of the world on the structures of thinking in engineering activities. On the basis of the case study method, a reconstruction and analysis of typical situations encountered in the practice of training engineers and developing educational programmes was carried out to demonstrate the significance of the theoretical and methodological results obtained. The case study was used as a method of scientific research, which has its advantages over other empirical methods in the area under study.Results. The main methodological approaches in understanding engineering thinking are identified and analysed: practice-oriented, phenomenological, conceptual, and contextual. A systemic model of engineering thinking is substantiated, including three levels: technological (mental activity, technologies of thinking); regulatory-target (scientific picture of the world, paradigms, style of thinking, etc.); value-semantic (value attitudes, positions, ideals, norms, strategic priorities, semantic patterns). Typical cases that are encountered in the practice of training engineering personnel are analysed. It is shown how the changes in the scientific picture of the world and methodological reflexive analysis allow the strategies for designing educational programmes to be adjusted. The influence of the modern convergent environment on the formation of value-semantic and regulatory-target structures of engineering thinking and on the forms of the engineer’s mental activity is revealed. Innovative models for the training of future engineers are presented (on the example of the Russian State Vocational Pedagogical University), focused on the methodological approaches presented in the article to understanding engineering thinking.Scientific novelty. The novelty of the proposed research is determined by the expansion of the theoretical and methodological framework for considering engineering thinking and the vectors of its development. The issues of the development of engineering thinking are most often discussed within the framework of technological development or in the logic of intra-professional transformations; the authors of the current study rely on a systematic vision of scientific and engineering activities. This made it possible to introduce into the field of scientific consideration of engineering thinking and engineering activities such regulatory epistemological structures as the scientific picture of the world, paradigm, style of thinking, etc., as well as value-semantic structures of thinking and activity (value attitudes, ideals, standards activities, norms, strategic priorities, semantic patterns, etc.). In theoretical terms, the study is important for overcoming narrow technological and technocratic approaches, for a reasonable etermination of the prospects for the development of engineering thinking in the conditions of convergent processes.Practical significance. The practical significance of the study is the determination of the methodological foundations for the practice of decision-making in the field of engineering training.
- 30 September 2023
- Published by Ore and Metals Publishing House in Chernye Metally
- No. 9,p. 40-46
Role of surface phenomena in deformation and fracture of gas turbine blades and stamping tools under intense mechanical and thermal loading
A study of the damageability of most parts and products of modern technology, operated under non-stationary thermal and mechanical loading, shows that their premature failure is mainly due to changes occurring in the near-surface thin layers of steels and alloys, where, first of all, plastic deformation processes proceed intensively, origin and accumulation of centers of destruction. The analysis performed shows that the magnitude of surface damage can be very large and largely depends on contact with the external environment, the degree of impact of which is determined by its aggressiveness, state of aggregation and force contact pressure. In such operating conditions, the task of creating reliable surface hardening systems is quite difficult and in most cases should be reduced to the development of a good protective coating for a particular alloy and a particular application. In order to maintain the calculated durability and reliability of the parts of the blade apparatus of gas turbine plants, the article proposes to use protective multilayer combined coatings applied to the contact surface using the thermal diffusion and plasma spraying methods. Under conditions of moderate temperatures and non-stationary mechanical loading, which is typical for hot-forming dies, in order to achieve high protective properties, thermal diffusion boride coatings are proposed, applied in coatings based on specially developed active pastes.
- 30 September 2023
- Published by Ore and Metals Publishing House in Chernye Metally
- No. 9,p. 40-46
Role of surface phenomena in deformation and fracture of gas turbine blades and stamping tools under intense mechanical and thermal loading
A study of the damageability of most parts and products of modern technology, operated under non-stationary thermal and mechanical loading, shows that their premature failure is mainly due to changes occurring in the near-surface thin layers of steels and alloys, where, first of all, plastic deformation processes proceed intensively, origin and accumulation of centers of destruction. The analysis performed shows that the magnitude of surface damage can be very large and largely depends on contact with the external environment, the degree of impact of which is determined by its aggressiveness, state of aggregation and force contact pressure. In such operating conditions, the task of creating reliable surface hardening systems is quite difficult and in most cases should be reduced to the development of a good protective coating for a particular alloy and a particular application. In order to maintain the calculated durability and reliability of the parts of the blade apparatus of gas turbine plants, the article proposes to use protective multilayer combined coatings applied to the contact surface using the thermal diffusion and plasma spraying methods. Under conditions of moderate temperatures and non-stationary mechanical loading, which is typical for hot-forming dies, in order to achieve high protective properties, thermal diffusion boride coatings are proposed, applied in coatings based on specially developed active pastes.
- Open Access
- 21 October 2022
- Published by Vocational education and labour market in Vocational education and labour market
- No. 3(50),p. 55-69
Formation of the professional communication abilities of vocational pedagogical university graduates—pedagogical technique
Введение. Представлен авторский подход к решению проблемы формирования способности к профессиональной коммуникации в процессе информационно-цифровой подготовки будущих педагогов профессионального обучения.Цель – раскрыть содержание понятия «способность к профессиональной коммуникации» как компонента готовности к компьютерному моделированию, представить педагогическую технологию формирования способности к профессиональной коммуникации в рамках изучения трансдисциплинарного модуля «Компьютерное моделирование» и прохождения производственной и педагогической практик.Методы. В качестве методологической базы исследования использовались следующие подходы: модульно-компетентностный (общие принципы формирования способности к профессиональной коммуникации в процессе информационно-цифровой подготовки); логико-информационный (для корректного отображения понятийного аппарата исследования, оценки возможности использования логических принципов и операций для обработки и представления данных и информации); транспрофессиональный (выявляет особенности построения содержания информационно-цифровой подготовки, в рамках которой осуществляется формирование способности к профессиональной коммуникации). Основные методы исследования: анализ научных публикаций, изучение опыта подготовки студентов кафедры инжиниринга и профессионального обучения в машиностроении и металлургии РГППУ.Результаты. Использование предложенной педагогической технологии формирования способности к профессиональной коммуникации позволяет более эффективно управлять коммуникативными ситуациями, изменять стиль общения, а также развивать личностные и профессиональные качества студентов в процессе обучения.Научная новизна. Выделены уровневые составляющие понятия «способность к профессиональной коммуникации», представлена педагогическая технология ее формирования в процессе информационно-цифровой подготовки будущих педагогов профессионального обучения.Практическая значимость Концептуальная основа представленной педагогической технологии формирования способности к профессиональной коммуникации может использоваться для развития коммуникативных навыков в процессе подготовки педагогов профессионального обучения различных профилей. Introduction. The article addresses the authors’ approach to solving the problem of formation of professional communication abilities during information and digital training of future vocational education teachers.Aim. To examine the concept of “professional communication abilities” in terms of computer modelling readiness; to present a pedagogical technique for the formation of professional communication abilities in the context of completing the transdisciplinary module “Computer modelling” and industrial and pedagogical practice.Methods. The following approaches were used as the methodological basis of the study: modular competence-based approach (general principles of the formation of the professional communication abilities during the information and digital training); logical and informational approach (for the correct display of the conceptual apparatus of research and the evaluation of the possibilities for using logical principles and operations for processing and presenting data and information); trans professional approach (reveals the features of the content construction of information and digital training, within which the formation of the professional communication abilities is carried out). Among the main research methods are: analysis of scientific publications, study of the students’ training experience at the Department of Engineering and Vocational Training in Mechanical Engineering and Metallurgy of RSVPU.Results. The use of the developed pedagogical technique for the formation of the professional communication abilities allows for the establishment of more effective communication, a change in the communication style, and contributes to the development of professional and personal qualities of students. Scientific novelty. The conceptual basis of the presented...
- 21 October 2022
- Published by Vocational education and labour market in Vocational education and labour market
- No. 3(50),p. 55-69
Open AccessFormation of the professional communication abilities of vocational pedagogical university graduates—pedagogical technique
Введение. Представлен авторский подход к решению проблемы формирования способности к профессиональной коммуникации в процессе информационно-цифровой подготовки будущих педагогов профессионального обучения.Цель – раскрыть содержание понятия «способность к профессиональной коммуникации» как компонента готовности к компьютерному моделированию, представить педагогическую технологию формирования способности к профессиональной коммуникации в рамках изучения трансдисциплинарного модуля «Компьютерное моделирование» и прохождения производственной и педагогической практик.Методы. В качестве методологической базы исследования использовались следующие подходы: модульно-компетентностный (общие принципы формирования способности к профессиональной коммуникации в процессе информационно-цифровой подготовки); логико-информационный (для корректного отображения понятийного аппарата исследования, оценки возможности использования логических принципов и операций для обработки и представления данных и информации); транспрофессиональный (выявляет особенности построения содержания информационно-цифровой подготовки, в рамках которой осуществляется формирование способности к профессиональной коммуникации). Основные методы исследования: анализ научных публикаций, изучение опыта подготовки студентов кафедры инжиниринга и профессионального обучения в машиностроении и металлургии РГППУ.Результаты. Использование предложенной педагогической технологии формирования способности к профессиональной коммуникации позволяет более эффективно управлять коммуникативными ситуациями, изменять стиль общения, а также развивать личностные и профессиональные качества студентов в процессе обучения.Научная новизна. Выделены уровневые составляющие понятия «способность к профессиональной коммуникации», представлена педагогическая технология ее формирования в процессе информационно-цифровой подготовки будущих педагогов профессионального обучения.Практическая значимость Концептуальная основа представленной педагогической технологии формирования способности к профессиональной коммуникации может использоваться для развития коммуникативных навыков в процессе подготовки педагогов профессионального обучения различных профилей. Introduction. The article addresses the authors’ approach to solving the problem of formation of professional communication abilities during information and digital training of future vocational education teachers.Aim. To examine the concept of “professional communication abilities” in terms of computer modelling readiness; to present a pedagogical technique for the formation of professional communication abilities in the context of completing the transdisciplinary module “Computer modelling” and industrial and pedagogical practice.Methods. The following approaches were used as the methodological basis of the study: modular competence-based approach (general principles of the formation of the professional communication abilities during the information and digital training); logical and informational approach (for the correct display of the conceptual apparatus of research and the evaluation of the possibilities for using logical principles and operations for processing and presenting data and information); trans professional approach (reveals the features of the content construction of information and digital training, within which the formation of the professional communication abilities is carried out). Among the main research methods are: analysis of scientific publications, study of the students’ training experience at the Department of Engineering and Vocational Training in Mechanical Engineering and Metallurgy of RSVPU.Results. The use of the developed pedagogical technique for the formation of the professional communication abilities allows for the establishment of more effective communication, a change in the communication style, and contributes to the development of professional and personal qualities of students. Scientific novelty. The conceptual basis of the presented...
- Open Access
- 29 April 2022
- Published by Gramota Publishing
- Vol. 7 (3) , 326-334
Transdisciplinary Engineering Training of Master’s Students in Bioengineering at a Federal University
The purpose of the study is to design a training programme for master’s students of the engineering specialisation pursuing a degree in bioengineering, based on the principles of transprofessionalism and social partnership. The paper presents the content, methodological foundations and educational technologies that make it possible to form specialisation competencies in the field of nuclear medicine in future graduates in a specially organised practice-oriented educational environment of a university by integrating production into the educational process. Scientific novelty lies in developing a concept and constructing a model for an educational programme specialisation in the subject area of nuclear medicine within the master’s programme in “Biotechnical Systems and Technologies”. As a result, it has been shown that the developed educational programme specialisation “Nuclear Medicine Technology” as a system is determined by means of mastering several training modules interconnected on the basis of a transdisciplinary approach, which contributes to the development of students’ innovation skills. The successful trial of the programme, which has been taking place in the real educational process for five years since 2017, has led to the creation of a scientific and educational cluster in the structure of a federal university, where a key role in training is assigned to students’ interdisciplinary projects that are carried out at the graduate department together with the Cyclotron Center for Nuclear Medicine of the Ural Federal University.
- 29 April 2022
- Published by Gramota Publishing
- Vol. 7 (3) , 326-334
Open AccessTransdisciplinary Engineering Training of Master’s Students in Bioengineering at a Federal University
The purpose of the study is to design a training programme for master’s students of the engineering specialisation pursuing a degree in bioengineering, based on the principles of transprofessionalism and social partnership. The paper presents the content, methodological foundations and educational technologies that make it possible to form specialisation competencies in the field of nuclear medicine in future graduates in a specially organised practice-oriented educational environment of a university by integrating production into the educational process. Scientific novelty lies in developing a concept and constructing a model for an educational programme specialisation in the subject area of nuclear medicine within the master’s programme in “Biotechnical Systems and Technologies”. As a result, it has been shown that the developed educational programme specialisation “Nuclear Medicine Technology” as a system is determined by means of mastering several training modules interconnected on the basis of a transdisciplinary approach, which contributes to the development of students’ innovation skills. The successful trial of the programme, which has been taking place in the real educational process for five years since 2017, has led to the creation of a scientific and educational cluster in the structure of a federal university, where a key role in training is assigned to students’ interdisciplinary projects that are carried out at the graduate department together with the Cyclotron Center for Nuclear Medicine of the Ural Federal University.
- 1 April 2022
- Published by Allerton Press in Steel in Translation
- Vol. 52 (4) , 393-397
Structure Formation in the Production of Sheet Steel by Continuous Casting and Deformation
Attention focuses on improving the quality of steel sheet for welded pipe. The main factors affecting sheet quality for thick-sheet mills are described. A
- 1 April 2022
- Published by Allerton Press in Steel in Translation
- Vol. 52 (4) , 393-397
Structure Formation in the Production of Sheet Steel by Continuous Casting and Deformation
Attention focuses on improving the quality of steel sheet for welded pipe. The main factors affecting sheet quality for thick-sheet mills are described. A
- Open Access
- 11 February 2022
- Published by National University of Science and Technology MISiS in Izvestiya. Ferrous Metallurgy
- Vol. 65 (1) , 38-47
Development of equipment and technology for precision air-plasma cutting of plate steel
The authors have investigated the structure of cutting seams obtained after cutting steel 09G2S with a new narrow-jet plasma torch of PMVR-5.3 type which has a number of design features in gas dynamic stabilization system (GDS) of plasma arc. To increase the efficiency of GDS in PMVR-5.3 plasma torch, a symmetrical input of plasma-forming gas (PFG) into the flow division system and a gas-dynamic flow stabilizer using two (forming and stabilizing) swirlers with a variable number of swirl channels were used. It is shown that the achieved advantage in GDS efficiency makes it possible to obtain high cutting quality of steel 09G2S with thickness of 40 mm with high productivity and lower energy costs. Analytical methods have proved a high degree of cutting precision of the new torch– a small cut width, no melting and rounding of the upper edge, as well as a grate in the cut lower part and splashes in the cut upper part, almost zero angular deviation, minimum values of the surface microrelief and width of the thermal impact zone. Metallographic analysis and determination of hardness showed the presence of three subzones in the thermal impact zone with significant structural changes in two of them. A number of factors were noted influencing the revealed changes in the structure formation, as well as changes in the elemental composition of the cutting seam surface layer revealed during the X-ray spectral analysis. Attention is drawn to the surface microrelief after plasma cutting, which in all quality indicators is commensurate with machining of the surface after milling and corresponds to the second class of quality in terms of surface cleanliness. It was proved that the use of the new narrow-jet plasma torch allows high-quality cutting of plate steel in thickness range up to 40 mm or more. However, welding of blanks without pre-machining can be carried out with a cutting thickness of no more than 20 mm.
- 11 February 2022
- Published by National University of Science and Technology MISiS in Izvestiya. Ferrous Metallurgy
- Vol. 65 (1) , 38-47
Open AccessDevelopment of equipment and technology for precision air-plasma cutting of plate steel
The authors have investigated the structure of cutting seams obtained after cutting steel 09G2S with a new narrow-jet plasma torch of PMVR-5.3 type which has a number of design features in gas dynamic stabilization system (GDS) of plasma arc. To increase the efficiency of GDS in PMVR-5.3 plasma torch, a symmetrical input of plasma-forming gas (PFG) into the flow division system and a gas-dynamic flow stabilizer using two (forming and stabilizing) swirlers with a variable number of swirl channels were used. It is shown that the achieved advantage in GDS efficiency makes it possible to obtain high cutting quality of steel 09G2S with thickness of 40 mm with high productivity and lower energy costs. Analytical methods have proved a high degree of cutting precision of the new torch– a small cut width, no melting and rounding of the upper edge, as well as a grate in the cut lower part and splashes in the cut upper part, almost zero angular deviation, minimum values of the surface microrelief and width of the thermal impact zone. Metallographic analysis and determination of hardness showed the presence of three subzones in the thermal impact zone with significant structural changes in two of them. A number of factors were noted influencing the revealed changes in the structure formation, as well as changes in the elemental composition of the cutting seam surface layer revealed during the X-ray spectral analysis. Attention is drawn to the surface microrelief after plasma cutting, which in all quality indicators is commensurate with machining of the surface after milling and corresponds to the second class of quality in terms of surface cleanliness. It was proved that the use of the new narrow-jet plasma torch allows high-quality cutting of plate steel in thickness range up to 40 mm or more. However, welding of blanks without pre-machining can be carried out with a cutting thickness of no more than 20 mm.
- Open Access
- 31 January 2022
- Published by Tomsk State Pedagogical University in Pedagogical Review
- No. 1(41),p. 92-104
DEVELOPMENT OF MASTERS’ INNOVATION SKILLS DURING SPECIALLY ORGANIZED ENGINEERING TRAINING
Статья посвящена рассмотрению и анализу факторов, влияющих на формирование всесторонне развитого специалиста, готового к решению неординарных задач, в том числе и трансдисциплинарной направленности. В работе показано, что наиболее эффективно развитие навыков инновационной деятельности магистрантов осуществляется с применением методик проектного обучения и в рамках социального партнерства на базе действующего производства. Подобный комплексный подход, основанный на условиях коллаборации университета с различными организациями в рамках совместных научно-технических проектов, позволит студенту попробовать себя в разных профессиональных ролях и впоследствии сделать правильный выбор собственной специализации с учетом приобретенных личностных качеств в сфере современных высокотехнологичных производств. Особо отмечается, что внедрение в учебный процесс подготовки магистров современных инновационных подходов имеет для России большие перспективы, поскольку позволяет формировать требуемый квалификационный потенциал будущих выпускников технических вузов. Применение методик проектного обучения при подготовке специалистов инженерного профиля рассмотрено на примере реализации междисциплинарных проектов Уральского федерального университета им. Б. Н. Ельцина, организованных на базе партнерства Физико-технологического института с инновационно-внедренческим Циклотронным центром ядерной медицины.
- 31 January 2022
- Published by Tomsk State Pedagogical University in Pedagogical Review
- No. 1(41),p. 92-104
Open AccessDEVELOPMENT OF MASTERS’ INNOVATION SKILLS DURING SPECIALLY ORGANIZED ENGINEERING TRAINING
Статья посвящена рассмотрению и анализу факторов, влияющих на формирование всесторонне развитого специалиста, готового к решению неординарных задач, в том числе и трансдисциплинарной направленности. В работе показано, что наиболее эффективно развитие навыков инновационной деятельности магистрантов осуществляется с применением методик проектного обучения и в рамках социального партнерства на базе действующего производства. Подобный комплексный подход, основанный на условиях коллаборации университета с различными организациями в рамках совместных научно-технических проектов, позволит студенту попробовать себя в разных профессиональных ролях и впоследствии сделать правильный выбор собственной специализации с учетом приобретенных личностных качеств в сфере современных высокотехнологичных производств. Особо отмечается, что внедрение в учебный процесс подготовки магистров современных инновационных подходов имеет для России большие перспективы, поскольку позволяет формировать требуемый квалификационный потенциал будущих выпускников технических вузов. Применение методик проектного обучения при подготовке специалистов инженерного профиля рассмотрено на примере реализации междисциплинарных проектов Уральского федерального университета им. Б. Н. Ельцина, организованных на базе партнерства Физико-технологического института с инновационно-внедренческим Циклотронным центром ядерной медицины.