Yumin Cao
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Yumin Cao has a total of 22 co-authors. Here are the top co-authors by number of shared publications:
- Keshuang Tang
Tongji University
5 shared publications - Chaopeng Tan
Technische Universität Dresden
2 shared publications - Jiarong Yao
School of Electrical and Electronic Engineering, Nanyang Technological University, Jurong West, Singapore
2 shared publications - Can Chen
Key Laboratory of Road and Traffic Engineering in the Ministry of Education
1 shared publication - Di Zang
Tongji University
1 shared publication - Hans van Lint
Department of Transport and Planning, Delft University of Technology, Delft, The Netherlands
1 shared publication
Latest Publications
- 19 March 2026
- Published by Elsevier in Control Engineering Practice
- Vol. 172
An adaptive critical path identification and coordination method for signalized traffic networks
- 19 March 2026
- Published by Elsevier in Control Engineering Practice
- Vol. 172
An adaptive critical path identification and coordination method for signalized traffic networks
- 13 February 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Intelligent Transportation Systems
- Vol. 25 (8) , 8881-8897
Connected Vehicle Data-Driven Fixed-Time Traffic Signal Control Considering Cyclic Time-Dependent Vehicle Arrivals Based on Cumulative Flow Diagram
Fixed-time control is a widely adopted and cost-effective method for signalized intersections. However, existing studies utilizing connected vehicle (CV) data have not effectively addressed fixed-time control due to their reliance on specific vehicle arrival assumptions. To overcome this limitation, this study presents a novel traffic control approach for fixed-time signalized intersections based on a cumulative flow diagram (CFD) framework. The proposed method comprises a CFD model and a multi-objective optimization model. The CFD model establishes analytical relationships between traffic flow operations and varying signal timing parameters, with intersection demand estimated using a novel weighted maximum likelihood estimation method. A multi-objective optimization model based on CFD is formulated to minimize exceeded queue dissipation time as the primary objective and average delay as the secondary objective, which is applicable under both undersaturated and oversaturated traffic conditions. Leveraging the data-driven nature of the CFD model, a specially designed bi-level particle swarm optimization-based algorithm is employed to determine optimal cycle length (and offset if applicable) and green ratios separately. Evaluation results demonstrate that the proposed method outperforms Synchro, a conventional approach, in terms of average delay and queue under various traffic conditions. Moreover, the proposed method exhibits the capability to handle specialized scenarios involving spillbacks.
- 13 February 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Intelligent Transportation Systems
- Vol. 25 (8) , 8881-8897
Connected Vehicle Data-Driven Fixed-Time Traffic Signal Control Considering Cyclic Time-Dependent Vehicle Arrivals Based on Cumulative Flow Diagram
Fixed-time control is a widely adopted and cost-effective method for signalized intersections. However, existing studies utilizing connected vehicle (CV) data have not effectively addressed fixed-time control due to their reliance on specific vehicle arrival assumptions. To overcome this limitation, this study presents a novel traffic control approach for fixed-time signalized intersections based on a cumulative flow diagram (CFD) framework. The proposed method comprises a CFD model and a multi-objective optimization model. The CFD model establishes analytical relationships between traffic flow operations and varying signal timing parameters, with intersection demand estimated using a novel weighted maximum likelihood estimation method. A multi-objective optimization model based on CFD is formulated to minimize exceeded queue dissipation time as the primary objective and average delay as the secondary objective, which is applicable under both undersaturated and oversaturated traffic conditions. Leveraging the data-driven nature of the CFD model, a specially designed bi-level particle swarm optimization-based algorithm is employed to determine optimal cycle length (and offset if applicable) and green ratios separately. Evaluation results demonstrate that the proposed method outperforms Synchro, a conventional approach, in terms of average delay and queue under various traffic conditions. Moreover, the proposed method exhibits the capability to handle specialized scenarios involving spillbacks.
- 17 May 2023
- Published by Taylor & Francis in Journal of Intelligent Transportation Systems
- Vol. 28 (5) , 756-773
Dynamic origin–destination flow estimation for urban road network solely using probe vehicle trajectory data
- 17 May 2023
- Published by Taylor & Francis in Journal of Intelligent Transportation Systems
- Vol. 28 (5) , 756-773
Dynamic origin–destination flow estimation for urban road network solely using probe vehicle trajectory data
- Open Access
- 5 February 2021
- Published by Wiley in Journal of Advanced Transportation
- Vol. 2021, 1-15
Dynamic Path Flow Estimation Using Automatic Vehicle Identification and Probe Vehicle Trajectory Data: A 3D Convolutional Neural Network Model
Dynamic path flows, referring to the number of vehicles that choose each path in a network over time, are generally estimated with the partial observations as the input. The automatic vehicle identification (AVI) system and probe vehicle trajectories are now popular and can provide rich and complementary trip information, but the data fusion was rarely explored. Therefore, in this paper, the dynamic path flow estimation is based on these two data sources and transformed into a feature learning problem. To fuse the two data sources belonging to different detection ways at the data level, the virtual AVI points, analogous to the real AVI points (turning movements at nodes with AVI detectors), are defined and selected to statically observe the dynamic movement of the probe vehicles. The corresponding selection principles and a programming model considering the distribution of real AVI points are first established. The selected virtual AVI points are used to construct the input tensor, and the turning movement-based observations from both the data sources can be extracted and fused. Then, a three-dimensional (3D) convolutional neural network (CNN) model is designed to exploit the hidden patterns from the tensor and establish the high-dimensional correlations with path flows. As the path flow labels commonly with noises, the bootstrapping method is adopted for model training and the corresponding relabeling principle is defined to purify the noisy labels. The entire model is extensively tested based on a realistic road network, and the results show that the designed CNN model with the presented data fusion method can perform well in training time and estimation accuracy. The robustness of a model to noisy labels is also improved through the bootstrapping method. The dynamic path flows estimated by the trained model can be applied to travel information provision, proactive route guidance, and signal control with high real-time requirements.
- 5 February 2021
- Published by Wiley in Journal of Advanced Transportation
- Vol. 2021, 1-15
Open AccessDynamic Path Flow Estimation Using Automatic Vehicle Identification and Probe Vehicle Trajectory Data: A 3D Convolutional Neural Network Model
Dynamic path flows, referring to the number of vehicles that choose each path in a network over time, are generally estimated with the partial observations as the input. The automatic vehicle identification (AVI) system and probe vehicle trajectories are now popular and can provide rich and complementary trip information, but the data fusion was rarely explored. Therefore, in this paper, the dynamic path flow estimation is based on these two data sources and transformed into a feature learning problem. To fuse the two data sources belonging to different detection ways at the data level, the virtual AVI points, analogous to the real AVI points (turning movements at nodes with AVI detectors), are defined and selected to statically observe the dynamic movement of the probe vehicles. The corresponding selection principles and a programming model considering the distribution of real AVI points are first established. The selected virtual AVI points are used to construct the input tensor, and the turning movement-based observations from both the data sources can be extracted and fused. Then, a three-dimensional (3D) convolutional neural network (CNN) model is designed to exploit the hidden patterns from the tensor and establish the high-dimensional correlations with path flows. As the path flow labels commonly with noises, the bootstrapping method is adopted for model training and the corresponding relabeling principle is defined to purify the noisy labels. The entire model is extensively tested based on a realistic road network, and the results show that the designed CNN model with the presented data fusion method can perform well in training time and estimation accuracy. The robustness of a model to noisy labels is also improved through the bootstrapping method. The dynamic path flows estimated by the trained model can be applied to travel information provision, proactive route guidance, and signal control with high real-time requirements.
- 3 November 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Intelligent Transportation Systems
- Vol. 23 (3) , 1829-1840
Short-Term Travel Speed Prediction for Urban Expressways: Hybrid Convolutional Neural Network Models
Deep learning models for short-term travel speed prediction on urban expressways, such as the convolutional neural network (CNN), still present several limitations in multiscale spatiotemporal feature extraction. Hence, in this paper, three hybrid CNN models are proposed to improve the basic CNN model with regard to three target aspects for short-term (i.e., 5 min) travel speed prediction on urban expressways. More specifically, long short-term memory (LSTM), AutoEncoder (AE), and Inception module are incorporated into the basic CNN model to capture multiscale spatiotemporal features of travel speed data effectively and improve the accuracy and robustness of the basic CNN model. Based on loop detector data collected on the Yan'an expressway in Shanghai, the proposed hybrid CNN models are trained and tuned. To validate the improvements on the target aspects, a comprehensive comparison is conducted using a classical statistical model (i.e., autoregressive integrated moving average), a typical shallow neural network model (i.e., artificial neural network), and two basic deep learning models (i.e., recurrent neural network and CNN). Results show that the prediction accuracies of all the proposed hybrid CNN models exceed 96% and the mean absolute errors are less than 2.5 km/h, which are superior to other models. In terms of target improving aspects, two new metrics were introduced, and the proposed models, especially the AE-CNN model, showed better robustness under various input data structures and traffic states. The LSTM-CNN model outperformed the other models in learning time-series features, and the Inception-CNN model is superior in reproducing the dynamics of traffic congestion patterns on urban expressways.
- 3 November 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Intelligent Transportation Systems
- Vol. 23 (3) , 1829-1840
Short-Term Travel Speed Prediction for Urban Expressways: Hybrid Convolutional Neural Network Models
Deep learning models for short-term travel speed prediction on urban expressways, such as the convolutional neural network (CNN), still present several limitations in multiscale spatiotemporal feature extraction. Hence, in this paper, three hybrid CNN models are proposed to improve the basic CNN model with regard to three target aspects for short-term (i.e., 5 min) travel speed prediction on urban expressways. More specifically, long short-term memory (LSTM), AutoEncoder (AE), and Inception module are incorporated into the basic CNN model to capture multiscale spatiotemporal features of travel speed data effectively and improve the accuracy and robustness of the basic CNN model. Based on loop detector data collected on the Yan'an expressway in Shanghai, the proposed hybrid CNN models are trained and tuned. To validate the improvements on the target aspects, a comprehensive comparison is conducted using a classical statistical model (i.e., autoregressive integrated moving average), a typical shallow neural network model (i.e., artificial neural network), and two basic deep learning models (i.e., recurrent neural network and CNN). Results show that the prediction accuracies of all the proposed hybrid CNN models exceed 96% and the mean absolute errors are less than 2.5 km/h, which are superior to other models. In terms of target improving aspects, two new metrics were introduced, and the proposed models, especially the AE-CNN model, showed better robustness under various input data structures and traffic states. The LSTM-CNN model outperformed the other models in learning time-series features, and the Inception-CNN model is superior in reproducing the dynamics of traffic congestion patterns on urban expressways.