Mehmet Yazar
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Mehmet Yazar has a total of 10 co-authors. Here are the top co-authors by number of shared publications:
- İbRahim Pazarkaya
Department of Mechanical Program, Afyon Kocatepe University, Afyonkarahisar 03200, Türkiye
6 shared publications - Mithat Yanıkören
Bilecik Şeyh Edebali Üniversitesi
4 shared publications - Ahmet Özdemir
Gazi Üniversitesi
3 shared publications Ahmet Özdemir
1 shared publication- Bilal Usanmaz
Atatürk Universitesi
1 shared publication - Gültekin Uzun
Gazi Üniversitesi, Teknoloji Fakültesi
1 shared publication
Latest Publications
- Open Access
- 10 September 2026
- Published by Politeknik Dergisi in Journal of Polytechnic
- Vol. 29 (5) , 1-12
Geometric Design, Additive Manufacturing, and Investigation of Contact Characteristics of a Logarithmic Spiral Spur Gear Pair
In this study, the parametric design, additive manufacturing, and contact path characteristics of logarithmic spiral spur gear pairs, which fall under the category of non-circular gears, have been examined. Within the scope of this study, a parametric design algorithm has been developed to create logarithmic spiral spur gear profiles. The two-dimensional gear profiles obtained using the developed algorithm have been converted into three-dimensional solid models, and physical prototypes have been produced using the FDM (Fused Deposition Modeling) additive manufacturing method with PLA (polylactic acid) filament. The kinematic behavior of the gear pair was analyzed in a CAD program to determine the contact points formed at different angular positions, and the contact path was obtained by connecting these points. The analysis results have shown that the contact path in logarithmic spiral spur gears exhibits a curved rather than a linear character and that the contact is continuous along the tooth surface. This may contribute to a wider contact area and a more balanced load distribution. The findings indicate that the logarithmic spiral spur gear geometry offers distinct contact characteristics that could serve as an alternative to traditional involute gears and can be successfully manufactured using additive manufacturing methods. This study aims to contribute to the literature by adopting a comprehensive approach to the design, manufacturing, and contact analysis processes of logarithmic spiral spur gears.
- 10 September 2026
- Published by Politeknik Dergisi in Journal of Polytechnic
- Vol. 29 (5) , 1-12
Open AccessGeometric Design, Additive Manufacturing, and Investigation of Contact Characteristics of a Logarithmic Spiral Spur Gear Pair
In this study, the parametric design, additive manufacturing, and contact path characteristics of logarithmic spiral spur gear pairs, which fall under the category of non-circular gears, have been examined. Within the scope of this study, a parametric design algorithm has been developed to create logarithmic spiral spur gear profiles. The two-dimensional gear profiles obtained using the developed algorithm have been converted into three-dimensional solid models, and physical prototypes have been produced using the FDM (Fused Deposition Modeling) additive manufacturing method with PLA (polylactic acid) filament. The kinematic behavior of the gear pair was analyzed in a CAD program to determine the contact points formed at different angular positions, and the contact path was obtained by connecting these points. The analysis results have shown that the contact path in logarithmic spiral spur gears exhibits a curved rather than a linear character and that the contact is continuous along the tooth surface. This may contribute to a wider contact area and a more balanced load distribution. The findings indicate that the logarithmic spiral spur gear geometry offers distinct contact characteristics that could serve as an alternative to traditional involute gears and can be successfully manufactured using additive manufacturing methods. This study aims to contribute to the literature by adopting a comprehensive approach to the design, manufacturing, and contact analysis processes of logarithmic spiral spur gears.
- 30 June 2026
- Published by Recep Tayyip Erdogan Universitesi in Recep Tayyip Erdoğan Üniversitesi Fen ve Mühendislik Bilimleri Dergisi
- Vol. 7 (1) , 210-223
Design of Non-Circular Gears Using a Generalized Parametric Algorithm and Verification via Additive Manufacturing
Although non-circular gears offer significant advantages in mechanical systems that require variable transmission ratios, they are not widely used due to the limited availability of design methods that can be generalized to different geometries and the complexity of manufacturing processes. In this study, a generalized parametric algorithm is presented that enables the design of non-circular gears with different numbers of lobes. The proposed approach is based on a parametric definition of the step curve and enables the derivation of elliptical and polygonal geometries within a single mathematical framework. The developed algorithm automatically generates mating tooth profiles based on user-defined parameters such as module, number of teeth, number of lobes, and eccentricity. In addition, the problem that the classical parametric model produces a constant speed ratio in symmetric cases has been identified, and an improved kinematic model incorporating a harmonic term has been proposed to address this issue. The resulting gear geometries have been modeled in a computer-aided design (CAD) environment and manufactured using a Fused Deposition Modeling (FDM)-based additive manufacturing process. Tests conducted on the prototypes confirmed that the gear pairs operated without interference and that the periodic speed variation predicted by the proposed model can be observed experimentally. The results demonstrate that the proposed approach can be generalized to different geometries, is feasible, and is applicable to engineering applications requiring variable-speed transmission.
- 30 June 2026
- Published by Recep Tayyip Erdogan Universitesi in Recep Tayyip Erdoğan Üniversitesi Fen ve Mühendislik Bilimleri Dergisi
- Vol. 7 (1) , 210-223
Design of Non-Circular Gears Using a Generalized Parametric Algorithm and Verification via Additive Manufacturing
Although non-circular gears offer significant advantages in mechanical systems that require variable transmission ratios, they are not widely used due to the limited availability of design methods that can be generalized to different geometries and the complexity of manufacturing processes. In this study, a generalized parametric algorithm is presented that enables the design of non-circular gears with different numbers of lobes. The proposed approach is based on a parametric definition of the step curve and enables the derivation of elliptical and polygonal geometries within a single mathematical framework. The developed algorithm automatically generates mating tooth profiles based on user-defined parameters such as module, number of teeth, number of lobes, and eccentricity. In addition, the problem that the classical parametric model produces a constant speed ratio in symmetric cases has been identified, and an improved kinematic model incorporating a harmonic term has been proposed to address this issue. The resulting gear geometries have been modeled in a computer-aided design (CAD) environment and manufactured using a Fused Deposition Modeling (FDM)-based additive manufacturing process. Tests conducted on the prototypes confirmed that the gear pairs operated without interference and that the periodic speed variation predicted by the proposed model can be observed experimentally. The results demonstrate that the proposed approach can be generalized to different geometries, is feasible, and is applicable to engineering applications requiring variable-speed transmission.
- 1 March 2026
- Published by Igdir University in Journal of the Institute of Science and Technology
- Vol. 16 (1) , 270-282
Design, Modal Analysis, Additive Manufacturing, and Flow Performance of An Elliptical Gear Hydraulic Pump
In this study, the design, manufacturing, modal analysis and flow performance of hydraulic pumps with elliptical and spur gear profiles are compared experimentally. Firstly, both gear types are modeled in a computer-aided design (CAD) environment and their natural frequencies and mode shapes are analyzed using the finite element method (FEM). As a result of modal analyses performed on four different thermoplastic materials, ABS, PC, PETG and PLA, PLA material is preferred due to its high frequency resistance and production suitability. In line with the selected geometry and material, gear pairs were produced by additive manufacturing (3D printing) method and prototype pumps are assembled. Both pump systems are tested at rotational speeds ranging from 1000 to 3000 rpm to measure volumetric flow performance. Experimental results showed that, at all speeds, the elliptical gear pump delivered a higher and more stable flow rate compared to the spur gear pump. At the highest test speed of 3000 rpm, the elliptical gear pump achieved an average flow rate of 23.6 L/min, whereas the spur gear pump produced only 4.9 L/min. Similarly, at the lowest test speed of 1500 rpm, the elliptical gear pump generated 8.29 L/min, while the spur gear pump delivered 2.05 L/min. These findings indicate that the elliptical gear geometry can improve pump performance by approximately fourfold, offering a compact and highly efficient alternative for hydraulic systems.
- 1 March 2026
- Published by Igdir University in Journal of the Institute of Science and Technology
- Vol. 16 (1) , 270-282
Design, Modal Analysis, Additive Manufacturing, and Flow Performance of An Elliptical Gear Hydraulic Pump
In this study, the design, manufacturing, modal analysis and flow performance of hydraulic pumps with elliptical and spur gear profiles are compared experimentally. Firstly, both gear types are modeled in a computer-aided design (CAD) environment and their natural frequencies and mode shapes are analyzed using the finite element method (FEM). As a result of modal analyses performed on four different thermoplastic materials, ABS, PC, PETG and PLA, PLA material is preferred due to its high frequency resistance and production suitability. In line with the selected geometry and material, gear pairs were produced by additive manufacturing (3D printing) method and prototype pumps are assembled. Both pump systems are tested at rotational speeds ranging from 1000 to 3000 rpm to measure volumetric flow performance. Experimental results showed that, at all speeds, the elliptical gear pump delivered a higher and more stable flow rate compared to the spur gear pump. At the highest test speed of 3000 rpm, the elliptical gear pump achieved an average flow rate of 23.6 L/min, whereas the spur gear pump produced only 4.9 L/min. Similarly, at the lowest test speed of 1500 rpm, the elliptical gear pump generated 8.29 L/min, while the spur gear pump delivered 2.05 L/min. These findings indicate that the elliptical gear geometry can improve pump performance by approximately fourfold, offering a compact and highly efficient alternative for hydraulic systems.
- Open Access
- 28 December 2025
- Published by International Journal of 3D Printing Technologies and Digital Industry in International Journal of 3D Printing Technologies and Digital Industry
- Vol. 9 (3) , 515-526
THE EFFECT OF THICKNESS AND FILAMENT TYPE ON THE MODAL BEHAVIOR OF 3D PRINTED SPUR GEARS
Nowadays, the modal analysis method is effectively employed in the design of low-noise, high-safety machines, the production of comfortable vehicles, and the development of structures resistant to dynamic loads, the establishment of safe operating conditions, and the determination of optimal operating parameters. In this study, modal analyses were conducted on spur gear models produced using four commonly utilized 3D printing filament materials (PLA, ABS, PET-G, and PC) each in four different thicknesses)3 mm, 5 mm, 7 mm, and 9 mm). The analyses were performed using a finite element analysis (FEA)-based simulation software. For each combination of material type and gear thickness, natural frequencies (Hz) and corresponding eigenvalues (1/s²) were obtained across six distinct vibration modes. The results indicate that both frequency and eigenvalue values vary significantly depending on the material type and gear thickness. It was observed that the thickness parameter has a substantial impact on the natural frequency in the lower modes. This comprehensive study graphically compares the vibrational behavior of different materials and thicknesses and provides a scientific basis for identifying the most suitable material–geometry combinations in terms of modal performance.
- 28 December 2025
- Published by International Journal of 3D Printing Technologies and Digital Industry in International Journal of 3D Printing Technologies and Digital Industry
- Vol. 9 (3) , 515-526
Open AccessTHE EFFECT OF THICKNESS AND FILAMENT TYPE ON THE MODAL BEHAVIOR OF 3D PRINTED SPUR GEARS
Nowadays, the modal analysis method is effectively employed in the design of low-noise, high-safety machines, the production of comfortable vehicles, and the development of structures resistant to dynamic loads, the establishment of safe operating conditions, and the determination of optimal operating parameters. In this study, modal analyses were conducted on spur gear models produced using four commonly utilized 3D printing filament materials (PLA, ABS, PET-G, and PC) each in four different thicknesses)3 mm, 5 mm, 7 mm, and 9 mm). The analyses were performed using a finite element analysis (FEA)-based simulation software. For each combination of material type and gear thickness, natural frequencies (Hz) and corresponding eigenvalues (1/s²) were obtained across six distinct vibration modes. The results indicate that both frequency and eigenvalue values vary significantly depending on the material type and gear thickness. It was observed that the thickness parameter has a substantial impact on the natural frequency in the lower modes. This comprehensive study graphically compares the vibrational behavior of different materials and thicknesses and provides a scientific basis for identifying the most suitable material–geometry combinations in terms of modal performance.
- 23 October 2025
- Published by Springer Nature in Sādhanā
- Vol. 50 (4) , 1-18
Experimental performance comparison of triangle and spur gear hydraulic pumps energy consumption efficiency standpoint
- 23 October 2025
- Published by Springer Nature in Sādhanā
- Vol. 50 (4) , 1-18
Experimental performance comparison of triangle and spur gear hydraulic pumps energy consumption efficiency standpoint
- 14 January 2025
- Published by Elsevier in Flow Measurement and Instrumentation
- Vol. 102
Comparative efficiency and performance analysis of spur gear and non-circular (square) gear hydraulic pumps
- 14 January 2025
- Published by Elsevier in Flow Measurement and Instrumentation
- Vol. 102
Comparative efficiency and performance analysis of spur gear and non-circular (square) gear hydraulic pumps
- 15 February 2024
- Published by Elsevier in Journal of Manufacturing Processes
- Vol. 115, 192-201
Effect of lapping process on axis misalignment and surface roughness in elliptical gear pairs
- 15 February 2024
- Published by Elsevier in Journal of Manufacturing Processes
- Vol. 115, 192-201
Effect of lapping process on axis misalignment and surface roughness in elliptical gear pairs
- 30 September 2022
- Published by Gazi Universitesi Fen Bilimleri Dergisi Part C: Tasarim ve Teknoloji in Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji
- Vol. 10 (3) , 558-576
Eliptik Dişli Tasarımı, İmalatı, Analizi ve Eliptik Dişlilerin Endüstriyel Uygulamaları
Eliptik dişliler üzerine yapılan çalışmaların diş profillerinin tasarımı üzerine yoğunlaştığı ve prototip imalatlarına yönelik araştırmaların arttığı görülmektedir. Eliptik dişlilerin diş profillerinin silindirik dişliler gibi özdeş olmayacağından hareketle geliştirilen eliptik dişlinin diş profili; kramayer veya silindirik düz dişli formlu kesicinin bölüm elipsi üzerinde yuvarlanma yöntemine uygun olarak evolvent eğriye sahip diş yanaklarının şekillendirilmesiyle elde edilmektedir. Eliptik dişlilerin imalatında CNC tel erozyon tezgahlarından faydalanmanın yaygınlaştığı, bununla birlikte azdırma tezgâhları için elektronik dişli kutuları geliştirilerek eliptik dişlilerin standart modülde imalatının da mümkün olduğu tespit edilmiştir. Eliptik dişli çiftleri farklı makine ve teçhizatta kullanılmakta, özellikle eliptik dişli çiftine sahip debimetre ve pompaların yaygınlaştığı görülmektedir. Enerji verimliliğinin son derece önem kazandığı günümüzde, yüksek akışkan miktarlarının doğru ve hassas ölçülmesi ve işletmelerin akışkan transferindeki kayıplarının giderilmesi de gerekmektedir. Bu genel değerlendirme çalışmasında eliptik dişlilerin tasarımı, geleneksel ve geleneksel olmayan imal usulleri ile imalatı, dayanım ve titreşim analizleri ve literatürde yer alan muhtelif endüstriyel uygulamaları gözen geçirilmiş ve çalışmanın ortak bulguları elde edilmiştir. Eliptik dişlilerin yakın gelecekte bünyesinde mekanik kısım barındıran birçok akıllı ürünün vazgeçilmez bir organı olacağı öngörülmektedir.
- 30 September 2022
- Published by Gazi Universitesi Fen Bilimleri Dergisi Part C: Tasarim ve Teknoloji in Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji
- Vol. 10 (3) , 558-576
Eliptik Dişli Tasarımı, İmalatı, Analizi ve Eliptik Dişlilerin Endüstriyel Uygulamaları
Eliptik dişliler üzerine yapılan çalışmaların diş profillerinin tasarımı üzerine yoğunlaştığı ve prototip imalatlarına yönelik araştırmaların arttığı görülmektedir. Eliptik dişlilerin diş profillerinin silindirik dişliler gibi özdeş olmayacağından hareketle geliştirilen eliptik dişlinin diş profili; kramayer veya silindirik düz dişli formlu kesicinin bölüm elipsi üzerinde yuvarlanma yöntemine uygun olarak evolvent eğriye sahip diş yanaklarının şekillendirilmesiyle elde edilmektedir. Eliptik dişlilerin imalatında CNC tel erozyon tezgahlarından faydalanmanın yaygınlaştığı, bununla birlikte azdırma tezgâhları için elektronik dişli kutuları geliştirilerek eliptik dişlilerin standart modülde imalatının da mümkün olduğu tespit edilmiştir. Eliptik dişli çiftleri farklı makine ve teçhizatta kullanılmakta, özellikle eliptik dişli çiftine sahip debimetre ve pompaların yaygınlaştığı görülmektedir. Enerji verimliliğinin son derece önem kazandığı günümüzde, yüksek akışkan miktarlarının doğru ve hassas ölçülmesi ve işletmelerin akışkan transferindeki kayıplarının giderilmesi de gerekmektedir. Bu genel değerlendirme çalışmasında eliptik dişlilerin tasarımı, geleneksel ve geleneksel olmayan imal usulleri ile imalatı, dayanım ve titreşim analizleri ve literatürde yer alan muhtelif endüstriyel uygulamaları gözen geçirilmiş ve çalışmanın ortak bulguları elde edilmiştir. Eliptik dişlilerin yakın gelecekte bünyesinde mekanik kısım barındıran birçok akıllı ürünün vazgeçilmez bir organı olacağı öngörülmektedir.