Marko Todorović
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Marko Todorović has a total of 21 co-authors. Here are the top co-authors by number of shared publications:
- Goran Bošković
University of Kragujevac, Faculty of Mechanical and Civil Engineering, Kraljevo, Serbia
5 shared publications - Goran Marković
University of Kragujevac, Faculty of Mechanical and Civil Engineering in Kraljevo, Serbia
5 shared publications - Nebojša Zdravković
Department of Medical Statistics and Informatics, Faculty of Medical Sciences, University of Kragujevac, Svetozara Markovića 69, 34000 Kragujevac, Serbia
5 shared publications - Borivoj Stepanov
University of Novi Sad
3 shared publications - Goran V. Pavlović
Faculty of Electronic Engineering, University of Nis, Nis, Serbia
3 shared publications - Marina Bošković
Faculty of Mechanical and Civil Engineering in Kraljevo, University of Kragujevac, Kraljevo, Republic of Serbia
3 shared publications
Latest Publications
- 1 January 2026
- Published by Centre for Evaluation in Education and Science (CEON/CEES)
- No. Session 7_,p. 489-497
Fires in high-rise buildings: Analysis of fire safety and engineering aspects
Fires in high-rise buildings represent complex engineering problems due to the interaction between fire development, smoke movement, building geometry, ventilation, façade systems, structural response, and fire protection measures. The increased height of buildings limits the effectiveness of external firefighting and creates conditions for vertical smoke and fire spread through stairwells, elevator shafts, ventilation systems, and façade cavities. This paper reviews the principal fire safety and engineering aspects of high-rise building fires, with emphasis on fire dynamics, smoke and heat transport, internal and external fire spread, passive and active protection systems, evacuation and firefighting conditions, and engineering approaches to fire risk assessment. Particular attention is given to computational fluid dynamics (CFD), Fire Dynamics Simulator (FDS), travelling-fire scenarios, and performance-based fire safety engineering. The reviewed literature indicates that conventional prescriptive approaches may be insufficient for complex high-rise configurations and that reliable fire safety assessment requires an integrated consideration of realistic fire scenarios, smoke movement, protection systems, structural response, and firefighting conditions.
- 1 January 2026
- Published by Centre for Evaluation in Education and Science (CEON/CEES)
- No. Session 7_,p. 489-497
Fires in high-rise buildings: Analysis of fire safety and engineering aspects
Fires in high-rise buildings represent complex engineering problems due to the interaction between fire development, smoke movement, building geometry, ventilation, façade systems, structural response, and fire protection measures. The increased height of buildings limits the effectiveness of external firefighting and creates conditions for vertical smoke and fire spread through stairwells, elevator shafts, ventilation systems, and façade cavities. This paper reviews the principal fire safety and engineering aspects of high-rise building fires, with emphasis on fire dynamics, smoke and heat transport, internal and external fire spread, passive and active protection systems, evacuation and firefighting conditions, and engineering approaches to fire risk assessment. Particular attention is given to computational fluid dynamics (CFD), Fire Dynamics Simulator (FDS), travelling-fire scenarios, and performance-based fire safety engineering. The reviewed literature indicates that conventional prescriptive approaches may be insufficient for complex high-rise configurations and that reliable fire safety assessment requires an integrated consideration of realistic fire scenarios, smoke movement, protection systems, structural response, and firefighting conditions.
- 1 January 2026
- Published by University Library in Kragujevac
- p. E1-E10
Integrated risk assessment and digital twin-based safety management in photovoltaic systems
The rapid expansion of photovoltaic (PV) systems has increased the importance of effective occupational health and safety management throughout the system life cycle. While photovoltaic technology is generally considered a safe and sustainable energy solution, numerous technical, environmental, organizational, and occupational hazards remain present during manufacturing, installation, operation, maintenance, and decommissioning phases. This paper presents a comprehensive literature review of risks associated with photovoltaic systems and proposes a Digital Twin-Assisted Failure Mode and Effects Analysis (DT-FMEA) framework for integrated risk assessment. The proposed approach combines traditional risk assessment principles with digital twin technology, enabling continuous monitoring, predictive diagnostics, and dynamic risk evaluation. The framework integrates technical, health-related, environmental, and social risk factors into a unified model capable of supporting predictive maintenance and proactive safety management. The results indicate that digital twins can significantly improve hazard detection capabilities, reduce risk priority levels, and enhance the overall sustainability and safety performance of photovoltaic installations. The study contributes to the development of next-generation safety management systems for renewable energy infrastructures.
- 1 January 2026
- Published by University Library in Kragujevac
- p. E1-E10
Integrated risk assessment and digital twin-based safety management in photovoltaic systems
The rapid expansion of photovoltaic (PV) systems has increased the importance of effective occupational health and safety management throughout the system life cycle. While photovoltaic technology is generally considered a safe and sustainable energy solution, numerous technical, environmental, organizational, and occupational hazards remain present during manufacturing, installation, operation, maintenance, and decommissioning phases. This paper presents a comprehensive literature review of risks associated with photovoltaic systems and proposes a Digital Twin-Assisted Failure Mode and Effects Analysis (DT-FMEA) framework for integrated risk assessment. The proposed approach combines traditional risk assessment principles with digital twin technology, enabling continuous monitoring, predictive diagnostics, and dynamic risk evaluation. The framework integrates technical, health-related, environmental, and social risk factors into a unified model capable of supporting predictive maintenance and proactive safety management. The results indicate that digital twins can significantly improve hazard detection capabilities, reduce risk priority levels, and enhance the overall sustainability and safety performance of photovoltaic installations. The study contributes to the development of next-generation safety management systems for renewable energy infrastructures.
- 1 January 2026
- Published by University Library in Kragujevac
- p. A51-A57
The determination of the deflection of the stepped column by the finite difference method
Besides the strength criterion, steel structures must also meet the deformation criterion, which in some cases may be critical. Excessive deformation of the structure may lead to additional loads and improper operation of the installed equipment. The most common practice in steel structure design involves using the finite element method (FEM) to calculate the stress and deformation of the current model. However, this is usually limited to the case study for the particular structural model. The paper demonstrates the application of the finite difference method (FDM) to determine the deflection of a stepped column, enabling a broader parametric study and analysis of a variety of solutions that satisfy the deformation criterion. The application of FDM yields a scheme convenient for coding in MATLAB while showing the dependence between the column deflection and the design parameters. The results from the finite element analysis (FEA) are in excellent agreement with those from the FDM.
- 1 January 2026
- Published by University Library in Kragujevac
- p. A51-A57
The determination of the deflection of the stepped column by the finite difference method
Besides the strength criterion, steel structures must also meet the deformation criterion, which in some cases may be critical. Excessive deformation of the structure may lead to additional loads and improper operation of the installed equipment. The most common practice in steel structure design involves using the finite element method (FEM) to calculate the stress and deformation of the current model. However, this is usually limited to the case study for the particular structural model. The paper demonstrates the application of the finite difference method (FDM) to determine the deflection of a stepped column, enabling a broader parametric study and analysis of a variety of solutions that satisfy the deformation criterion. The application of FDM yields a scheme convenient for coding in MATLAB while showing the dependence between the column deflection and the design parameters. The results from the finite element analysis (FEA) are in excellent agreement with those from the FDM.
- 23 August 2025
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering
- Vol. 240 (7) , 4248-4258
Determination of maximal velocity of a four-wheel forklift in a curve with constant curvature for simulation purposes
Efficiency evaluation for further optimization of existing solutions or making an efficient new solution of the material handling systems within the warehouses mainly is completed using different simulation techniques and environments. These are created by describing relevant characteristics in the process of modelling each of the system’s component. When modelling material handling devices for the performance evaluation of the material handling systems the focus is usually on kinematic characteristics as well as energy consumption. Forklifts are one of the mostly used material handling devices in warehouses and as such they are widely present in many simulation environments where their moving speed is very important parameter. The goal of this study is to determine the velocity of the forklifts in cornering situations from the perspective of quasi-static rollover, steady-state cornering and workers’ safety in the forklifts’ moving area which is essential for building more precise forklift models for simulation purposes.
- 23 August 2025
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering
- Vol. 240 (7) , 4248-4258
Determination of maximal velocity of a four-wheel forklift in a curve with constant curvature for simulation purposes
Efficiency evaluation for further optimization of existing solutions or making an efficient new solution of the material handling systems within the warehouses mainly is completed using different simulation techniques and environments. These are created by describing relevant characteristics in the process of modelling each of the system’s component. When modelling material handling devices for the performance evaluation of the material handling systems the focus is usually on kinematic characteristics as well as energy consumption. Forklifts are one of the mostly used material handling devices in warehouses and as such they are widely present in many simulation environments where their moving speed is very important parameter. The goal of this study is to determine the velocity of the forklifts in cornering situations from the perspective of quasi-static rollover, steady-state cornering and workers’ safety in the forklifts’ moving area which is essential for building more precise forklift models for simulation purposes.
- 1 January 2025
- Published by University Library in Kragujevac
- p. 36-43
DISCRETE EVENT SIMULATION MODEL FOR EXPECTED CYCLE TIME OF AS/RS WITH DOUBLE DEEP PALLET RACK
Automated storage and retrieval systems are widely used in highly dense tall warehouses as an important part of material handling systems, as they can efficiently reach highly positioned loads and their footprint is narrow. Their performance within the system can be evaluated using discrete event simulation techniques. The model created and described in this paper is a model of an automated storage and retrieval system working on a single and double deep pallet rack storage system. The parameters obtained through the simulation were the average single command cycle time and throughput.
- 1 January 2025
- Published by University Library in Kragujevac
- p. 36-43
DISCRETE EVENT SIMULATION MODEL FOR EXPECTED CYCLE TIME OF AS/RS WITH DOUBLE DEEP PALLET RACK
Automated storage and retrieval systems are widely used in highly dense tall warehouses as an important part of material handling systems, as they can efficiently reach highly positioned loads and their footprint is narrow. Their performance within the system can be evaluated using discrete event simulation techniques. The model created and described in this paper is a model of an automated storage and retrieval system working on a single and double deep pallet rack storage system. The parameters obtained through the simulation were the average single command cycle time and throughput.
- Open Access
A New Method for the Determination of Fire Risk Zones in High-Bay Warehouses
Considering that the determination of fire hazard zones in warehouses is not sufficiently researched and studied, this paper aims to present a new methodological approach concerning the mentioned issue. Based on the COPRAS multi-criteria decision-making method, a new method was developed for the precise determination of potential zones where there is a risk of fire. The advantage of the described method is that it allows the quick and easy determination of all-orientation fire risk zones. The method requires fewer hardware resources compared to the existing ones and enables the display of the warehouse space in the form of a 3D model with calculated fire hazard zones. The mentioned procedure represents the first step when planning the layout and arrangement in the warehouse itself. The effectiveness of the proposed method was confirmed through a suitable numerical example.
Open AccessA New Method for the Determination of Fire Risk Zones in High-Bay Warehouses
Considering that the determination of fire hazard zones in warehouses is not sufficiently researched and studied, this paper aims to present a new methodological approach concerning the mentioned issue. Based on the COPRAS multi-criteria decision-making method, a new method was developed for the precise determination of potential zones where there is a risk of fire. The advantage of the described method is that it allows the quick and easy determination of all-orientation fire risk zones. The method requires fewer hardware resources compared to the existing ones and enables the display of the warehouse space in the form of a 3D model with calculated fire hazard zones. The mentioned procedure represents the first step when planning the layout and arrangement in the warehouse itself. The effectiveness of the proposed method was confirmed through a suitable numerical example.
- Open Access
- 1 January 2024
- Published by Centre for Evaluation in Education and Science (CEON/CEES) in Engineering Today
- Vol. 3 (4) , 21-32
Analysis and low-weight design of the cold-formed battened built-up column
This research presents the analysis and the low-weight optimization design of the cold-formed battened built-up column of the crane runway beam by the Marine Predators Algorithm (MPA). The objective function (the total weight of the battened built-up column) workflow uses slenderness and the geometric parameters of the channel section and batten plates as variables. This study uses the global stability of the built-up column, the buckling check of the built-up column about the material axis and non-material axis, the buckling and the strength check of the chord of the built-up column, the strength check of the batten plate of the built-up column, the strength of the batten plate's weld connections, as well as geometrical recommendations and limitations as the constraint functions. Achieved savings in column weight are between 38.66% and 51.66%, dependingly on the material and the number of batten plates of the considered example of the built-up column.
- 1 January 2024
- Published by Centre for Evaluation in Education and Science (CEON/CEES) in Engineering Today
- Vol. 3 (4) , 21-32
Open AccessAnalysis and low-weight design of the cold-formed battened built-up column
This research presents the analysis and the low-weight optimization design of the cold-formed battened built-up column of the crane runway beam by the Marine Predators Algorithm (MPA). The objective function (the total weight of the battened built-up column) workflow uses slenderness and the geometric parameters of the channel section and batten plates as variables. This study uses the global stability of the built-up column, the buckling check of the built-up column about the material axis and non-material axis, the buckling and the strength check of the chord of the built-up column, the strength check of the batten plate of the built-up column, the strength of the batten plate's weld connections, as well as geometrical recommendations and limitations as the constraint functions. Achieved savings in column weight are between 38.66% and 51.66%, dependingly on the material and the number of batten plates of the considered example of the built-up column.
- 1 January 2024
- Published by Faculty of Technical Sciences
- p. 215-218
THE PROCEDURE FOR CALCULATING INPUT PARAMETERS IN THE PROCESS OF DETERMINING POTENTIAL RISK ZONES IN WAREHOUSES
- 1 January 2024
- Published by Faculty of Technical Sciences
- p. 215-218
THE PROCEDURE FOR CALCULATING INPUT PARAMETERS IN THE PROCESS OF DETERMINING POTENTIAL RISK ZONES IN WAREHOUSES
- Open Access
- 1 January 2024
- Published by Centre for Evaluation in Education and Science (CEON/CEES) in Engineering Today
- Vol. 3 (2) , 55-64
Comparison of fuzzy MCDM approaches in the elevator selection problem
Considering a part of the problem in the domain of vertical transport, and above all elevators, it is noticeable that there are a large number of technically feasible alternatives in most cases. The designer's task is to choose from a set of possible solutions that best match the technical and economic conditions defined by the project task. The design and appropriate MCDM technique determine the quality of the recommended decision, saving computational time without sacrificing quality in the final ranking of alternatives. The task is to choose solutions that best match the technical and economic conditions. Therefore, selecting an adequate elevator is a problem that requires the manipulation of a large number of different data and, at the same time, the inclusion of a significant number of relevant criteria and goals that can often conflict. Fuzzy logic has proven excellent in models where intuition and judgment are primary elements. This paper aims to present a systematic overview of the developed fuzzy MCDM techniques. By ranking and comparative analysis of the results, this research represents an attempt to choose a method to support decisionmaking and create a comprehensive tool in the elevator selection process.
- 1 January 2024
- Published by Centre for Evaluation in Education and Science (CEON/CEES) in Engineering Today
- Vol. 3 (2) , 55-64
Open AccessComparison of fuzzy MCDM approaches in the elevator selection problem
Considering a part of the problem in the domain of vertical transport, and above all elevators, it is noticeable that there are a large number of technically feasible alternatives in most cases. The designer's task is to choose from a set of possible solutions that best match the technical and economic conditions defined by the project task. The design and appropriate MCDM technique determine the quality of the recommended decision, saving computational time without sacrificing quality in the final ranking of alternatives. The task is to choose solutions that best match the technical and economic conditions. Therefore, selecting an adequate elevator is a problem that requires the manipulation of a large number of different data and, at the same time, the inclusion of a significant number of relevant criteria and goals that can often conflict. Fuzzy logic has proven excellent in models where intuition and judgment are primary elements. This paper aims to present a systematic overview of the developed fuzzy MCDM techniques. By ranking and comparative analysis of the results, this research represents an attempt to choose a method to support decisionmaking and create a comprehensive tool in the elevator selection process.
- 1 January 2022
- Published by Centre for Evaluation in Education and Science (CEON/CEES) in Engineering Today
- Vol. 1 (4) , 7-17
An analytical approach for free vibration analysis of Euler-Bernoulli stepped beams with axial-bending coupling effect
Free vibration of eccentrically stepped beams with one step change in cross-section is considered. It is assumed that the longitudinal symmetry axes of the beam segments are translationally shifted along the vertical direction with respect to each other. The effect of that arrangement of the segments on the coupling of axial and bending vibrations of the stepped beam is analyzed. The beam segments are modeled in the frame of the Euler-Bernoulli theory of elastic beams. Two numerical examples are presented.
- 1 January 2022
- Published by Centre for Evaluation in Education and Science (CEON/CEES) in Engineering Today
- Vol. 1 (4) , 7-17
An analytical approach for free vibration analysis of Euler-Bernoulli stepped beams with axial-bending coupling effect
Free vibration of eccentrically stepped beams with one step change in cross-section is considered. It is assumed that the longitudinal symmetry axes of the beam segments are translationally shifted along the vertical direction with respect to each other. The effect of that arrangement of the segments on the coupling of axial and bending vibrations of the stepped beam is analyzed. The beam segments are modeled in the frame of the Euler-Bernoulli theory of elastic beams. Two numerical examples are presented.