XWXintian Wang

Xintian Wang

*This is an algorithmically generated author record based on publicly available information.

Xintian Wang has a total of 17 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Research on a New Method of Macro–Micro Platform Linkage Processing for Large-Format Laser Precision Machining

    by Longjie Xiong, Haifeng Ma, Zheng Sun, Xintian Wang, Yukui Cai, Qinghua Song, Zhanqiang Liu

    In recent years, the macro–micro structure (servo platform for macro motion and galvanometer for micro motion) composed of a galvanometer and servo platform has been gradually applied to laser processing in order to address the increasing demand for high-speed, high-precision, and large-format precision machining. The research in this field has evolved from step-and-scan methods to linkage processing methods. Nevertheless, the existing linkage processing methods cannot make full use of the field-of-view (FOV) of the galvanometer. In terms of motion distribution, the existing methods are not suitable for continuous micro segments and generate the problem that the distribution parameter can only be obtained through experience or multiple experiments. In this research, a new laser linkage processing method for global trajectory smoothing of densely discretized paths is proposed. The proposed method can generate a smooth trajectory of the servo platform with bounded acceleration by the finite impulse response (FIR) filter under the global blending error constrained by the galvanometer FOV. Moreover, the trajectory of the galvanometer is generated by vector subtraction, and the motion distribution of macro–micro structure is accurately realized. Experimental verification is carried out on an experimental platform composed of a three-axis servo platform, a galvanometer, and a laser. Simulation experiment results indicate that the processing efficiency of the proposed method is improved by 79% compared with the servo platform processing only and 55% compared with the previous linkage processing method. Furthermore, the method can be successfully utilized on experimental platforms with good tracking performance. In summary, the proposed method adeptly balances efficiency and quality, rendering it particularly suitable for laser precision machining applications.


  • Disturbance Observer-Based Adaptive Neural Control of the Permanent Magnet Linear Motor System With Unknown Backlash-Like Hysteresis

    by Xintian Wang, Xuesong Mei, Xiaodong Wang, Zheng Sun, Bin Liu

    In the large-area multidevice linkage-based laser processing, using the traditional control method cannot guarantee the processing accuracy of a permanent magnet linear motor (PMLM) system for a high-speed subject, due to unknown model uncertainties, backlash-like hysteresis, states constraints, and external disturbance. To address this shortcoming, this article develops a disturbance observe-based adaptive neural control for the PMLM system. First, aiming at the problem of unknown and uncertain system parameters, this study uses a radial basis neural network to estimate unknown functions of the system. Then, an adaptive variable is introduced to compensate for the effect of unknown backlash-like hysteresis, and the barrier Lyapunov function is used to restrict the motor from operating in a specified area. In addition, a nonlinear disturbance observer is constructed to adapt to the actual processing to reduce the influence of the external disturbance and the system load change. The proposed control scheme is verified experimentally, and the results indicate that when the proposed method is used, the PMLM system is consistently bounded by using the Lyapunov theorem. Finally, the simulation and experimental results verify the effectiveness of the proposed control strategy. The proposed method could be applied to laser-processing equipment.


  • A Novel Method for Measuring, Collimating, and Maintaining the Spatial Pose of Terminal Beam in Laser Processing System Based on 3D and 2D Hybrid Vision

    by Xiaodong Wang, Bin Liu, Xuesong Mei, Xintian Wang, Renhan Lian

    The terminal beam collimation problem of laser processing systems has traditionally been a headache. The deflection of the terminal beam seriously affects the processing accuracy and success. In this article, A novel method for measuring, collimating, and maintaining the spatial pose of the terminal beam in a five-axis laser processing system based on 3-D and 2-D hybrid vision is proposed. The beam pose in the working space of the laser processing system is measured by using a 3D scanner and an alignment sensor. The functional relationship between the galvanometer coordinates and the deflection angles of the terminal beam is established. The coordinates corresponding to the minimum deflection angle are solved to collimate the beam. Moreover, a camera is used to monitor the laser spot and re-collimate the deflected beam. The experimental results show that the method proposed in this article can effectively measure the deflection angle of the terminal beam, collimate the terminal beam and monitor the spot position of the terminal beam. The method can effectively improve the processing accuracy when applied to the laser processing system and has excellent potential application value.


  • Picosecond laser trimming of ceramic cores with porous multi-scale particle microstructure

    by Xiaodong Wang, Xuesong Mei, Xintian Wang, Bin Liu, Zheng Sun, Renhan Lian


  • Genetic algorithm for dynamic parameters estimation of the machine tool worktable using the residual vibration signal

    by Xiaodong Wang, Bin Liu, Xuesong Mei, Xialun Yun, Xiao Li, Qin Li, Xintian Wang

    In this article, the residual vibration signal of the worktable of the machine tool is used to identify its dynamic parameters. By analyzing the time-domain characteristics of the residual vibration signal, it is found that the signal has the similar attenuation characteristics to the impulse response of the second-order underdamped system, so a new method for identifying the dynamic parameters of the worktable is proposed. In this method, the impulse response model of the second-order underdamped system is used to describe the residual vibration signal, so the parameter identification problem based on the time-domain signal is transformed into the optimization problem of the model parameters. Then, the dynamic parameters can be determined by using the genetic algorithm. The results of the genetic algorithm are compared with the results of the autoregressive moving average method, which is a commonly used parameter identification method based on the time-domain signal. It was found that the results of the model-based method proposed in this article are more accurate than the autoregressive moving average method.