Kian Gheitasi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Kian Gheitasi has a total of 4 co-authors. Here are the top co-authors by number of shared publications:
- Walter Lucia
Concordia Institute for Information Systems Engineering (CIISE), Concordia University, Montreal, QC, Canada
9 shared publications Mohsen Ghaderi
3 shared publications- Mohsen Ghaderi
Electrical and Computer Engineering, Concordia University, Montreal, Quebec Canada h3x 2v8
2 shared publications Maryam Bagherzadeh
Electrical and Computer Engineering Department (ECE), Concordia University, Montreal, QC, H3G 1M8, CANADA
1 shared publication
Latest Publications
- 12 September 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Automatic Control
- Vol. PP (00189286) , 1-7
A worst-case approach to safety and reference tracking for cyber-physical systems under network attacks
In this technical note, the safety and reference tracking control problems for Cyber-Physical Systems (CPSs) equipped with authenticated communication channels are addressed. In this class of CPSs, network attacks can break the feedback loop at two different points for an arbitrarily long period. In this scenario, we design a novel control architecture that, by taking a worst-case approach, aims to preserve the safety of the systems while minimizing, whenever possible, the tracking performance degradation. On the plant side, a local safety controller is designed to take care of attacks on the actuation channel. In particular, given a finite number of pre-determined admissible safe equilibrium points, this unit exploits a Voronoi partition of the state space and a family of dual-model set-theoretic model predictive controllers to safely confine, in a finite number of steps, the system into the closest robust control invariant region. On the other hand, on the controller side, the reference tracking controller operations are enhanced with an add-on module in charge of dealing with attack occurrences on the measurement channel. Specifically, by leveraging the Voronoi partition used on the plant's side and reachability arguments, the objective of this unit is to reduce the performance loss by allowing a supervised system evolution until the best outcome in terms of tracking is achieved. The obtained theoretical results are proved and the solution's effectiveness is shown through a simulation example.
- 12 September 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Automatic Control
- Vol. PP (00189286) , 1-7
A worst-case approach to safety and reference tracking for cyber-physical systems under network attacks
In this technical note, the safety and reference tracking control problems for Cyber-Physical Systems (CPSs) equipped with authenticated communication channels are addressed. In this class of CPSs, network attacks can break the feedback loop at two different points for an arbitrarily long period. In this scenario, we design a novel control architecture that, by taking a worst-case approach, aims to preserve the safety of the systems while minimizing, whenever possible, the tracking performance degradation. On the plant side, a local safety controller is designed to take care of attacks on the actuation channel. In particular, given a finite number of pre-determined admissible safe equilibrium points, this unit exploits a Voronoi partition of the state space and a family of dual-model set-theoretic model predictive controllers to safely confine, in a finite number of steps, the system into the closest robust control invariant region. On the other hand, on the controller side, the reference tracking controller operations are enhanced with an add-on module in charge of dealing with attack occurrences on the measurement channel. Specifically, by leveraging the Voronoi partition used on the plant's side and reachability arguments, the objective of this unit is to reduce the performance loss by allowing a supervised system evolution until the best outcome in terms of tracking is achieved. The obtained theoretical results are proved and the solution's effectiveness is shown through a simulation example.
- 5 January 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Control of Network Systems
- Vol. 9 (2) , 1040-1048
Undetectable Finite-Time Covert Attack on Constrained Cyber-Physical Systems
In the last decades, several cyber-threats against Cyber-Physical Systems (CPSs) have been reported. Of particular interest are the classes of network attacks capable of affecting the control systems' performance while remaining undetectable. In this paper, under some conditions, we show the existence of a novel class of finite-time undetectable attacks against constrained CPSs. The proposed finite-time attack has the peculiar capability of not producing anomalies after its termination. This is particularly dangerous because it enables a malicious entity to repeatedly or intermittently affect the CPS without raising alarms. Such an attack is here designed by resorting to a set-theoretic approach that leverages robust reachability arguments. Moreover, given the desired attack duration, the set of initial states from which the attack is feasible is characterized. A numerical simulation example involving an industrial continuous-stirred tank reactor system is presented to support the theoretical results.
- 5 January 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Control of Network Systems
- Vol. 9 (2) , 1040-1048
Undetectable Finite-Time Covert Attack on Constrained Cyber-Physical Systems
In the last decades, several cyber-threats against Cyber-Physical Systems (CPSs) have been reported. Of particular interest are the classes of network attacks capable of affecting the control systems' performance while remaining undetectable. In this paper, under some conditions, we show the existence of a novel class of finite-time undetectable attacks against constrained CPSs. The proposed finite-time attack has the peculiar capability of not producing anomalies after its termination. This is particularly dangerous because it enables a malicious entity to repeatedly or intermittently affect the CPS without raising alarms. Such an attack is here designed by resorting to a set-theoretic approach that leverages robust reachability arguments. Moreover, given the desired attack duration, the set of initial states from which the attack is feasible is characterized. A numerical simulation example involving an industrial continuous-stirred tank reactor system is presented to support the theoretical results.
- 16 February 2021
- Published by Wiley in International Journal of Robust and Nonlinear Control
- Vol. 31 (8) , 3036-3053
A safety preserving control architecture for cyber‐physical systems
In this article, we propose a networked control architecture to ensure the plant's safety in the presence of cyber‐attacks on the communication channels. In particular, we consider systems subject to both state and input constraints that must be preserved for safety reasons despite any admissible attack scenario. To this end, first, two different detectors are proposed to detect attacks on the setpoint signal as well as on the control inputs and sensor measurements. Then, an emergency controller (EC), local to the plant, is designed to replace the networked controller whenever an attack is detected. Finally, the concept of robust N‐step attack‐safe region is introduced to ensure that the EC is activated, regardless of the detector performance, at least one‐step before the safety constraints are violated. It is formally proved that the plant trajectory is uniformly ultimately bounded in an admissible region regardless of the attacker's actions and duration. Finally, by considering a continuous‐stirred tank reactor system, numerical simulations are presented to show the proposed solution's capabilities.
- 16 February 2021
- Published by Wiley in International Journal of Robust and Nonlinear Control
- Vol. 31 (8) , 3036-3053
A safety preserving control architecture for cyber‐physical systems
In this article, we propose a networked control architecture to ensure the plant's safety in the presence of cyber‐attacks on the communication channels. In particular, we consider systems subject to both state and input constraints that must be preserved for safety reasons despite any admissible attack scenario. To this end, first, two different detectors are proposed to detect attacks on the setpoint signal as well as on the control inputs and sensor measurements. Then, an emergency controller (EC), local to the plant, is designed to replace the networked controller whenever an attack is detected. Finally, the concept of robust N‐step attack‐safe region is introduced to ensure that the EC is activated, regardless of the detector performance, at least one‐step before the safety constraints are violated. It is formally proved that the plant trajectory is uniformly ultimately bounded in an admissible region regardless of the attacker's actions and duration. Finally, by considering a continuous‐stirred tank reactor system, numerical simulations are presented to show the proposed solution's capabilities.
- 16 September 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Control of Network Systems
- Vol. 8 (1) , 168-176
A Blended Active Detection Strategy for False Data Injection Attacks in Cyber-Physical Systems
In recent years, different solutions have been proposed to detect advanced stealthy cyber-attacks against networked control systems. In this manuscript, we propose a blended detection scheme that properly leverages and combines two existing detection ideas, namely watermarking and moving target. In particular, a watermarked signal and a nonlinear static auxiliary function are combined to both limit the attacker's disclosure resources and obtain an unidentifiable moving target. The proposed scheme is capable of detecting a broad class of false data injection attacks, including zero-dynamics, replay, and covert attacks. Moreover, it is shown that the proposed approach mitigates the drawbacks of standard moving target and watermarking defense strategies. Finally, an extensive simulation study is reported to contrast the proposed detector with recent competitor schemes and provide tangible evidence of the effectiveness of the proposed solution.
- 16 September 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Control of Network Systems
- Vol. 8 (1) , 168-176
A Blended Active Detection Strategy for False Data Injection Attacks in Cyber-Physical Systems
In recent years, different solutions have been proposed to detect advanced stealthy cyber-attacks against networked control systems. In this manuscript, we propose a blended detection scheme that properly leverages and combines two existing detection ideas, namely watermarking and moving target. In particular, a watermarked signal and a nonlinear static auxiliary function are combined to both limit the attacker's disclosure resources and obtain an unidentifiable moving target. The proposed scheme is capable of detecting a broad class of false data injection attacks, including zero-dynamics, replay, and covert attacks. Moreover, it is shown that the proposed approach mitigates the drawbacks of standard moving target and watermarking defense strategies. Finally, an extensive simulation study is reported to contrast the proposed detector with recent competitor schemes and provide tangible evidence of the effectiveness of the proposed solution.
- 23 June 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Automatic Control
- Vol. 66 (5) , 2332-2338
Setpoint Attack Detection in Cyber-Physical Systems
In this paper, we face the problem of detecting setpoint attacks in networked control systems. We consider a setup where the reference signal (also known as setpoint) is generated by a control center remotely located with respect to a standard feedback controller. In this scenario, an attacker with sufficient resources can exploit the communication channel to alter the setpoint signal and ultimately affect the tracking performance of the control system. With respect to this problem, we propose a novel distributed control architecture that, taking advantage of peculiar capabilities of the Command Governor (CG) control paradigm, enables the detection of reference attacks. We formally prove that for constrained linear systems such detector exists. Moreover, by limiting the attacker's disclosure resources with superimposed cryptographically secure pseudo-random signals, we show that the absence of advanced stealthy attacks is also ensured. Finally, a solid numerical simulation investigating setpoint attacks on the flight control system of a single-engine fighter is presented to provide tangible evidence of the features of the presented methodology.
- 23 June 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Automatic Control
- Vol. 66 (5) , 2332-2338
Setpoint Attack Detection in Cyber-Physical Systems
In this paper, we face the problem of detecting setpoint attacks in networked control systems. We consider a setup where the reference signal (also known as setpoint) is generated by a control center remotely located with respect to a standard feedback controller. In this scenario, an attacker with sufficient resources can exploit the communication channel to alter the setpoint signal and ultimately affect the tracking performance of the control system. With respect to this problem, we propose a novel distributed control architecture that, taking advantage of peculiar capabilities of the Command Governor (CG) control paradigm, enables the detection of reference attacks. We formally prove that for constrained linear systems such detector exists. Moreover, by limiting the attacker's disclosure resources with superimposed cryptographically secure pseudo-random signals, we show that the absence of advanced stealthy attacks is also ensured. Finally, a solid numerical simulation investigating setpoint attacks on the flight control system of a single-engine fighter is presented to provide tangible evidence of the features of the presented methodology.
- 1 December 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 6013-6018
A Low Computationally Demanding Model Predictive Control Strategy for Robust Transient Stability in Smart Grid
In this paper, a computational low-demanding Model Predictive Control (MPC) strategy is proposed to deal with the transient stability control problem in Smart Grid systems. The proposed MPC controller is based on a dual model set-theoretic paradigm capable of robustly coping with model uncertainties and sensor measurement noise. Most of the required computations are moved into an offline phase leaving into the online phase a simple and computationally affordable convex optimization problem. A notable property of the proposed scheme is the capability of ensuring that transient stability is robustly achieved in a finite, and a priori known, time interval, regardless of any disturbance realization. The conducted simulation example shows the effectiveness of the proposed solution.
- 1 December 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 6013-6018
A Low Computationally Demanding Model Predictive Control Strategy for Robust Transient Stability in Smart Grid
In this paper, a computational low-demanding Model Predictive Control (MPC) strategy is proposed to deal with the transient stability control problem in Smart Grid systems. The proposed MPC controller is based on a dual model set-theoretic paradigm capable of robustly coping with model uncertainties and sensor measurement noise. Most of the required computations are moved into an offline phase leaving into the online phase a simple and computationally affordable convex optimization problem. A notable property of the proposed scheme is the capability of ensuring that transient stability is robustly achieved in a finite, and a priori known, time interval, regardless of any disturbance realization. The conducted simulation example shows the effectiveness of the proposed solution.
- 1 December 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 4529-4534
A Command Governor Based Approach for Detection of Setpoint Attacks in Constrained Cyber-Physical Systems
In this paper, we propose a novel control architecture capable of discovering cyber-attacks affecting the setpoint signal in a networked control system. We assume that the setpoint is generated by a Control Center remotely located with respect to the closed-loop system and an insecure channel is used for communications. By taking advantage of the main features of the Command Governor (CG) control paradigm, a simple Detector module is designed to detect cyber-attacks that might affect the setpoint signal. Finally, a simulation campaign, reproducing different attack scenarios, is performed to provide tangible evidence of the control architecture capabilities.
- 1 December 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 4529-4534
A Command Governor Based Approach for Detection of Setpoint Attacks in Constrained Cyber-Physical Systems
In this paper, we propose a novel control architecture capable of discovering cyber-attacks affecting the setpoint signal in a networked control system. We assume that the setpoint is generated by a Control Center remotely located with respect to the closed-loop system and an insecure channel is used for communications. By taking advantage of the main features of the Command Governor (CG) control paradigm, a simple Detector module is designed to detect cyber-attacks that might affect the setpoint signal. Finally, a simulation campaign, reproducing different attack scenarios, is performed to provide tangible evidence of the control architecture capabilities.