Lei Jia
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Lei Jia has a total of 13 co-authors. Here are the top co-authors by number of shared publications:
- Junko Umeda
Joining and Welding Research Institute, Osaka University
2 shared publications - Katsuyoshi Kondoh
Joining and Welding Research Institute, Osaka University
2 shared publications - Biao Chen
State Key Laboratory of Solidification Processing, Northwestern Polytechnical University, Xi’an 710072, China
1 shared publication - Chao Lei
School of Materials Science and Engineering, Xi’an University of Technology, Xi’an 710048, China
1 shared publication - Fangqi Liu
School of Materials Science and Engineering, Xi’an University of Technology, Xi’an 710048, China
1 shared publication - Hiroko Fujii
Joining and Welding Research Institute, Osaka University, Ibaraki 567-0047, Japan
1 shared publication
Latest Publications
- Open Access
Temperature Field Simulation and Process Parameter Analysis of Self-Propagating High-Temperature Synthesis for Al–V Master Alloy
Aluminum–vanadium (Al–V) master alloy is a key raw material for manufacturing high-end alloys, but the internal temperature transient field during its self-propagating high-temperature synthesis (SHS) is nearly impossible to measure in situ. This work develops a numerical simulation framework for Al–V master alloy SHS, featuring a novel temperature–time dual-criteria adaptive moving heat source and a gas–liquid–solid three-phase heat transfer model coupled with temperature-dependent thermophysical properties. The model, implemented in ANSYS Fluent via a customized user-defined function (UDF), is experimentally validated with a maximum temperature error below 7%. Results reveal that higher compact relative density accelerates combustion wave propagation, while increased slagging agent content exerts an inhibitory effect. This study provides a theoretical and quantitative tool for mechanism analysis and industrial process optimization of Al–V master alloy SHS production.
Open AccessTemperature Field Simulation and Process Parameter Analysis of Self-Propagating High-Temperature Synthesis for Al–V Master Alloy
Aluminum–vanadium (Al–V) master alloy is a key raw material for manufacturing high-end alloys, but the internal temperature transient field during its self-propagating high-temperature synthesis (SHS) is nearly impossible to measure in situ. This work develops a numerical simulation framework for Al–V master alloy SHS, featuring a novel temperature–time dual-criteria adaptive moving heat source and a gas–liquid–solid three-phase heat transfer model coupled with temperature-dependent thermophysical properties. The model, implemented in ANSYS Fluent via a customized user-defined function (UDF), is experimentally validated with a maximum temperature error below 7%. Results reveal that higher compact relative density accelerates combustion wave propagation, while increased slagging agent content exerts an inhibitory effect. This study provides a theoretical and quantitative tool for mechanism analysis and industrial process optimization of Al–V master alloy SHS production.
- Open Access
Precipitation and Distribution Behavior of In Situ-Formed TiB Whiskers in Ti64 Composites Fabricated by Selective Laser Melting
The precipitation and distribution behaviors of in situ-formed titanium boride whiskers (TiB) in TiBw-reinforced Ti-6%Al-4%V (Ti64) composites fabricated from an elemental mixture of Ti64 alloy powder and TiB2 particles by selective laser melting were investigated. The primary precipitation of TiB whiskers strongly depends on B content. For a B content of less than 2 mass%, when the liquid → β-phase transformation occurred and B atoms were discharged, the B-enriched area formed around the β-phase resulted in the generation of TiB whiskers and their agglomeration at the prior β-grain boundaries. When the B content was over 2 mass%, TiB whiskers directly precipitated from the liquid phase and moved to the molten pool boundary via Marangoni convection. As a result, the TiB whiskers were located along the boundary. Furthermore, B-enrichment caused a decrease in the liquidus temperature and thus obstructed β-grain coarsening, and as a result, fine equiaxed α’-grains formed during the phase transformation.
Open AccessPrecipitation and Distribution Behavior of In Situ-Formed TiB Whiskers in Ti64 Composites Fabricated by Selective Laser Melting
The precipitation and distribution behaviors of in situ-formed titanium boride whiskers (TiB) in TiBw-reinforced Ti-6%Al-4%V (Ti64) composites fabricated from an elemental mixture of Ti64 alloy powder and TiB2 particles by selective laser melting were investigated. The primary precipitation of TiB whiskers strongly depends on B content. For a B content of less than 2 mass%, when the liquid → β-phase transformation occurred and B atoms were discharged, the B-enriched area formed around the β-phase resulted in the generation of TiB whiskers and their agglomeration at the prior β-grain boundaries. When the B content was over 2 mass%, TiB whiskers directly precipitated from the liquid phase and moved to the molten pool boundary via Marangoni convection. As a result, the TiB whiskers were located along the boundary. Furthermore, B-enrichment caused a decrease in the liquidus temperature and thus obstructed β-grain coarsening, and as a result, fine equiaxed α’-grains formed during the phase transformation.
- Open Access
In-Situ Formed Al3Zr Compounds Reinforced Al Composites and Tribological Application
An Al3Zr-reinforced Al matrix composite using metal powders was fabricated via in-situ synthesis in vacuum; these were subjected to a pin-on-disc wear test with a SUS304 disc specimen under oil lubrication. The elemental mixture of Al and ZrH2 particles was sintered in vacuum for the in-situ-formed Al3Zr. ZrH2 particles were thermally decomposed in the reaction with the Al matrix to form hard Al3Zr intermetallic compounds. The friction coefficient and wear volume values of the Al–Al3Zr composites were significantly lower than those of the pure Al specimen. This is attributed to the uniform dispersion of Al3Zr particles in the Al matrix, which prevented the metallurgical bond from falling and blocked the direct contact between the Al matrix and SUS304 disc.
Open AccessIn-Situ Formed Al3Zr Compounds Reinforced Al Composites and Tribological Application
An Al3Zr-reinforced Al matrix composite using metal powders was fabricated via in-situ synthesis in vacuum; these were subjected to a pin-on-disc wear test with a SUS304 disc specimen under oil lubrication. The elemental mixture of Al and ZrH2 particles was sintered in vacuum for the in-situ-formed Al3Zr. ZrH2 particles were thermally decomposed in the reaction with the Al matrix to form hard Al3Zr intermetallic compounds. The friction coefficient and wear volume values of the Al–Al3Zr composites were significantly lower than those of the pure Al specimen. This is attributed to the uniform dispersion of Al3Zr particles in the Al matrix, which prevented the metallurgical bond from falling and blocked the direct contact between the Al matrix and SUS304 disc.