Jiangjin Liu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Jiangjin Liu has a total of 40 co-authors. Here are the top co-authors by number of shared publications:
- Adam Zev Weber
Lawrence Berkeley National Laboratory
5 shared publications - Iryna V. Zenyuk
University of California
3 shared publications - Andrew Thomas Haug
Fuel Cells Components Program, 3M Company, 3M Center, Building 0201-02-N-19, Saint Paul, MN 55144-1000
2 shared publications - Ahmet Kusoglu
Lawrence Berkeley National Laboratory
1 shared publication Anamika Chowdhury
Energy Conversion Group, Energy Technologies Area, Lawrence Berkeley National Laboratory, Berkeley, California 94720, United States
1 shared publication- Andrea Perego
University of California Irvine
1 shared publication
Latest Publications
- Open Access
- 1 May 2022
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 169 (5) , 054506
Ionomer Optimization for Hydroxide-Exchange-Membrane Water Electrolyzers Operated with Distilled Water: A Modeling Study
The hydroxide-exchange-membrane water electrolyzer (HEMWE) is a promising means to store intermittent renewable energy in the form of hydrogen chemical energy. The hydroxide-exchange ionomer (HEI) in the gas-evolving electrodes and the hydroxide-exchange membrane (HEM) are key components of HEMWE. In this work, we simulate the cell and examine explicitly the impact of HEI and HEM properties with a focus on improving HEMWE performance when operated with distilled water (i.e., no supporting electrolyte). The tradeoff between the ionic conductivity gain and electrochemically active surface area (ECSA) loss is studied. For a constant catalyst loading, distributing more catalyst next to the HEM or making thinner but denser catalyst layer is beneficial for HEMWE performance. The results demonstrate that a higher water diffusion coefficient is desired for HEM to supply reactant water to the cathode. In contrast, a lower water diffusion coefficient is preferred for the cathode HEI to retain the water in the regions with high reaction rates. Overall, the findings provide important insights to optimizing HEI/HEM materials for improved HEMWE performance.
- 1 May 2022
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 169 (5) , 054506
Open AccessIonomer Optimization for Hydroxide-Exchange-Membrane Water Electrolyzers Operated with Distilled Water: A Modeling Study
The hydroxide-exchange-membrane water electrolyzer (HEMWE) is a promising means to store intermittent renewable energy in the form of hydrogen chemical energy. The hydroxide-exchange ionomer (HEI) in the gas-evolving electrodes and the hydroxide-exchange membrane (HEM) are key components of HEMWE. In this work, we simulate the cell and examine explicitly the impact of HEI and HEM properties with a focus on improving HEMWE performance when operated with distilled water (i.e., no supporting electrolyte). The tradeoff between the ionic conductivity gain and electrochemically active surface area (ECSA) loss is studied. For a constant catalyst loading, distributing more catalyst next to the HEM or making thinner but denser catalyst layer is beneficial for HEMWE performance. The results demonstrate that a higher water diffusion coefficient is desired for HEM to supply reactant water to the cathode. In contrast, a lower water diffusion coefficient is preferred for the cathode HEI to retain the water in the regions with high reaction rates. Overall, the findings provide important insights to optimizing HEI/HEM materials for improved HEMWE performance.
- 19 April 2022
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 47 (40) , 17749-17761
Coupled continuum and network model framework to study catalyst layers of polymer electrolyte fuel cells
- 19 April 2022
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 47 (40) , 17749-17761
Coupled continuum and network model framework to study catalyst layers of polymer electrolyte fuel cells
- 7 September 2021
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 13 (36) , 42579-42589
Linking Perfluorosulfonic Acid Ionomer Chemistry and High-Current Density Performance in Fuel-Cell Electrodes
Transport phenomena are key in controlling the performance of electrochemical energy-conversion technologies and can be highly complex, involving multiple length scales and materials/phases. Material designs optimized for one reactant species transport however may inhibit other transport processes. We explore such trade-offs in the context of polymer-electrolyte fuel-cell electrodes, where ionomer thin films provide the necessary proton conductivity but retard oxygen transport to the Pt reaction site and cause interfacial resistance due to sulfonate/Pt interactions. We examine the electrode overall gas-transport resistance and its components as a function of ionomer content and chemistry. Low-equivalent-weight ionomers allow better dissolved-gas and proton transport due to greater water uptake and low crystallinity but also cause significant interfacial resistance due to the high density of sulfonic acid groups. These effects of equivalent weight are also observed via in situ ionic conductivity and CO displacement measurements. Of critical importance, the results are supported by ex situ ellipsometry and X-ray scattering of model thin-film systems, thereby providing direct linkages and applicability of model studies to probe complex heterogeneous structures. Structural and resultant performance changes in the electrode are shown to occur above a threshold sulfonic-group loading, highlighting the significance of ink-based interactions. Our findings and methodologies are applicable to a variety of solid-state energy-conversion devices and material designs.
- 7 September 2021
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 13 (36) , 42579-42589
Linking Perfluorosulfonic Acid Ionomer Chemistry and High-Current Density Performance in Fuel-Cell Electrodes
Transport phenomena are key in controlling the performance of electrochemical energy-conversion technologies and can be highly complex, involving multiple length scales and materials/phases. Material designs optimized for one reactant species transport however may inhibit other transport processes. We explore such trade-offs in the context of polymer-electrolyte fuel-cell electrodes, where ionomer thin films provide the necessary proton conductivity but retard oxygen transport to the Pt reaction site and cause interfacial resistance due to sulfonate/Pt interactions. We examine the electrode overall gas-transport resistance and its components as a function of ionomer content and chemistry. Low-equivalent-weight ionomers allow better dissolved-gas and proton transport due to greater water uptake and low crystallinity but also cause significant interfacial resistance due to the high density of sulfonic acid groups. These effects of equivalent weight are also observed via in situ ionic conductivity and CO displacement measurements. Of critical importance, the results are supported by ex situ ellipsometry and X-ray scattering of model thin-film systems, thereby providing direct linkages and applicability of model studies to probe complex heterogeneous structures. Structural and resultant performance changes in the electrode are shown to occur above a threshold sulfonic-group loading, highlighting the significance of ink-based interactions. Our findings and methodologies are applicable to a variety of solid-state energy-conversion devices and material designs.
- Open Access
- 1 May 2021
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 168 (5) , 054522
Elucidating the Role of Hydroxide Electrolyte on Anion-Exchange-Membrane Water Electrolyzer Performance
Many solid-state devices, especially those requiring anion conduction, often add a supporting electrolyte to enable efficient operation. The prototypical case is that of anion-exchange-membrane water electrolyzers (AEMWEs), where addition of an alkali metal solution improves performance. However, the specific mechanism of this performance improvement is currently unknown. This work investigates the functionality of the alkali metal solution in AEMWEs using experiments and mathematical models. The results show that additional hydroxide plays a key role not only in ohmic resistance of the membrane and catalyst layer but also in the reaction kinetics. The modeling suggests that the added liquid electrolyte creates an additional electrochemical interface with the electrocatalyst that provides ion-transport pathways and distributes product gas bubbles; the total effective electrochemical active surface area in the cell with 1 M KOH is 5 times higher than that of the cell with DI water. In the cell with 1 M KOH, more than 80% of the reaction current is associate with the liquid electrolyte. These results indicate the importance of high pH of electrolyte and catalyst/electrolyte interface in AEMWEs. The understanding of the functionality of the alkali metal solution presented in this study should help guide the design and optimization of AEMWEs.
- 1 May 2021
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 168 (5) , 054522
Open AccessElucidating the Role of Hydroxide Electrolyte on Anion-Exchange-Membrane Water Electrolyzer Performance
Many solid-state devices, especially those requiring anion conduction, often add a supporting electrolyte to enable efficient operation. The prototypical case is that of anion-exchange-membrane water electrolyzers (AEMWEs), where addition of an alkali metal solution improves performance. However, the specific mechanism of this performance improvement is currently unknown. This work investigates the functionality of the alkali metal solution in AEMWEs using experiments and mathematical models. The results show that additional hydroxide plays a key role not only in ohmic resistance of the membrane and catalyst layer but also in the reaction kinetics. The modeling suggests that the added liquid electrolyte creates an additional electrochemical interface with the electrocatalyst that provides ion-transport pathways and distributes product gas bubbles; the total effective electrochemical active surface area in the cell with 1 M KOH is 5 times higher than that of the cell with DI water. In the cell with 1 M KOH, more than 80% of the reaction current is associate with the liquid electrolyte. These results indicate the importance of high pH of electrolyte and catalyst/electrolyte interface in AEMWEs. The understanding of the functionality of the alkali metal solution presented in this study should help guide the design and optimization of AEMWEs.
- Open Access
- 19 March 2021
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 168 (7) , 074503
Method—Practices and Pitfalls in Voltage Breakdown Analysis of Electrochemical Energy-Conversion Systems
Many electrochemical energy-conversion systems are evaluated by polarization curves, which report the cell voltage across a range of current densities and are a global measure of operation and state of health. Mathematical models can be used to deconstruct the measured overall voltage and identify and quantify the voltage-loss sources, such as kinetic, ohmic, and mass-transport effects. These results elucidate the best pathways for improved performance. In this work, we discuss several voltage-breakdown methods and provide examples across different low-temperature, membrane-based electrochemical systems including electrolyzers, fuel cells, and related electrochemical energy-conversion devices. We present best practices to guide experimentalists and theorists in polarization-curve breakdown analysis.
- 19 March 2021
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 168 (7) , 074503
Open AccessMethod—Practices and Pitfalls in Voltage Breakdown Analysis of Electrochemical Energy-Conversion Systems
Many electrochemical energy-conversion systems are evaluated by polarization curves, which report the cell voltage across a range of current densities and are a global measure of operation and state of health. Mathematical models can be used to deconstruct the measured overall voltage and identify and quantify the voltage-loss sources, such as kinetic, ohmic, and mass-transport effects. These results elucidate the best pathways for improved performance. In this work, we discuss several voltage-breakdown methods and provide examples across different low-temperature, membrane-based electrochemical systems including electrolyzers, fuel cells, and related electrochemical energy-conversion devices. We present best practices to guide experimentalists and theorists in polarization-curve breakdown analysis.
- Open Access
- 23 November 2020
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2020-02 (53) , 3743
Interpreting Ionic Conductivity for Polymer Electrolyte Fuel Cell Catalyst Layers with Electrochemical Impedance Spectroscopy and Transmission Line Modeling
An optimal cathode catalyst layer with uniform ionomer distribution is critical to reduce the platinum loading and increase the utilization in polymer electrolyte fuel cells (PEFCs). Having well distributed ionomer with low ionomer to carbon (I/C) ratio is desirable, as it will also minimize local oxygen transport resistance. In this work, we used electrochemical impedance spectroscopy (EIS) method and transmission line model (TLM) to measure and evaluate ionic conductivity of pseudo catalyst layers (PCLs) comprised of Vulcan XC72 carbon black and 3M 825 EW ionomer with I/C ratios of 0.3, 0.6, 1 and 1.4 at a relative humidity (RH) range of 50 to 120 %. These results were compared with our previous hydrogen pump (HP) measurements, where PCL was sandwiched between the two membranes and protons had to transport through the entire PCL to be counted towards current. EIS effective ionic conductivity results reported here are higher than the results of HP because in the HP set-up ionic pathways must percolate all the way through the PCL to be effectively counted, whereas in EIS measurement, ionomer segments that are in contact with the membrane but not percolating all the way through the PCL can be detected. Additionally, three effects were studied: 1) hot press, 2) platinum content and carbon black support, and 3) ionomer content or lack of ionomer. Ionic conductivity increased significantly by hot pressing PCL onto the membrane, however, it was independent with respect to the hot press conditions, such as pressure and temperature. Hot pressing with low I/C ratio had more impact than high I/C ratio because at high I/C ratio even without hot press there is a sufficient amount of contact points between catalyst layer and membrane. At high RHs, catalyst layer containing Pt has higher ionic conductivity compared to PCL because of Pt particles being hydrophilic, which helps to distribute the ionomer more uniformly. To investigate the effect of condensed water, PTFE dispersion was used as a binder for Pt/C layer instead of ionomer, resulting ionic conductivity decreased with increasing applied potential at 100% and 120% RH conditions. At lower RHs, ionic conductivity is independent of the applied potentials.
- 23 November 2020
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2020-02 (53) , 3743
Open AccessInterpreting Ionic Conductivity for Polymer Electrolyte Fuel Cell Catalyst Layers with Electrochemical Impedance Spectroscopy and Transmission Line Modeling
An optimal cathode catalyst layer with uniform ionomer distribution is critical to reduce the platinum loading and increase the utilization in polymer electrolyte fuel cells (PEFCs). Having well distributed ionomer with low ionomer to carbon (I/C) ratio is desirable, as it will also minimize local oxygen transport resistance. In this work, we used electrochemical impedance spectroscopy (EIS) method and transmission line model (TLM) to measure and evaluate ionic conductivity of pseudo catalyst layers (PCLs) comprised of Vulcan XC72 carbon black and 3M 825 EW ionomer with I/C ratios of 0.3, 0.6, 1 and 1.4 at a relative humidity (RH) range of 50 to 120 %. These results were compared with our previous hydrogen pump (HP) measurements, where PCL was sandwiched between the two membranes and protons had to transport through the entire PCL to be counted towards current. EIS effective ionic conductivity results reported here are higher than the results of HP because in the HP set-up ionic pathways must percolate all the way through the PCL to be effectively counted, whereas in EIS measurement, ionomer segments that are in contact with the membrane but not percolating all the way through the PCL can be detected. Additionally, three effects were studied: 1) hot press, 2) platinum content and carbon black support, and 3) ionomer content or lack of ionomer. Ionic conductivity increased significantly by hot pressing PCL onto the membrane, however, it was independent with respect to the hot press conditions, such as pressure and temperature. Hot pressing with low I/C ratio had more impact than high I/C ratio because at high I/C ratio even without hot press there is a sufficient amount of contact points between catalyst layer and membrane. At high RHs, catalyst layer containing Pt has higher ionic conductivity compared to PCL because of Pt particles being hydrophilic, which helps to distribute the ionomer more uniformly. To investigate the effect of condensed water, PTFE dispersion was used as a binder for Pt/C layer instead of ionomer, resulting ionic conductivity decreased with increasing applied potential at 100% and 120% RH conditions. At lower RHs, ionic conductivity is independent of the applied potentials.
- 27 October 2020
- Published by Royal Society of Chemistry (RSC) in Energy & Environmental Science
- Vol. 13 (12) , 4872-4881
Hierarchical electrode design of highly efficient and stable unitized regenerative fuel cells (URFCs) for long-term energy storage
The unitized regenerative fuel cell (URFC) is a promising electrochemical device for intermittent renewable energy storage in chemical bonds. However, widespread application has been hindered due to low round-trip efficiencies (RTEs) and disappointing durability, in particular at high rates. Here, we break through that barrier by demonstrating highly efficient, flexible, and stable URFCs via hierarchical design of the multiscale catalyst-layer structures. A more porous and less tortuous Pt and Ir catalyst layer is realized using a doctor blade fabrication method that significantly improves URFC performance. We demonstrate RTEs of 56% and 53% under constant-electrode and constant-gas mode, respectively, while operating at 1000 mA cm−2, and significantly, a RTE of 45% at 2000 mA cm−2, achievements that were previously viewed as unfeasible under the onerous demands of URFC operation. At the same time we demonstrate URFCs under both constant-electrode and constant-gas mode operated continuously for over 500 h with negligible degradation. These results demonstrate the viability of applying URFCs for long-term energy storage at previously unattainable efficiencies and cast new light on electrode design and optimization of URFCs.
- 27 October 2020
- Published by Royal Society of Chemistry (RSC) in Energy & Environmental Science
- Vol. 13 (12) , 4872-4881
Hierarchical electrode design of highly efficient and stable unitized regenerative fuel cells (URFCs) for long-term energy storage
The unitized regenerative fuel cell (URFC) is a promising electrochemical device for intermittent renewable energy storage in chemical bonds. However, widespread application has been hindered due to low round-trip efficiencies (RTEs) and disappointing durability, in particular at high rates. Here, we break through that barrier by demonstrating highly efficient, flexible, and stable URFCs via hierarchical design of the multiscale catalyst-layer structures. A more porous and less tortuous Pt and Ir catalyst layer is realized using a doctor blade fabrication method that significantly improves URFC performance. We demonstrate RTEs of 56% and 53% under constant-electrode and constant-gas mode, respectively, while operating at 1000 mA cm−2, and significantly, a RTE of 45% at 2000 mA cm−2, achievements that were previously viewed as unfeasible under the onerous demands of URFC operation. At the same time we demonstrate URFCs under both constant-electrode and constant-gas mode operated continuously for over 500 h with negligible degradation. These results demonstrate the viability of applying URFCs for long-term energy storage at previously unattainable efficiencies and cast new light on electrode design and optimization of URFCs.