Philipp Natzke
Philipp Natzke has a total of 12 co-authors. Here are the top co-authors by number of shared publications:
- Ulrike Grossner
ETH Zurich
3 shared publications - Alessandro Paccagnella
University of Padova
2 shared publications - Corinna Martinella
Advanced Power Semiconductor Laboratory (APS), ETH Zrich, Zrich, Switzerland
2 shared publications - Marta Bagatin
Department of Information Engineering, University of Padova, Padua, Italy
2 shared publications - Serena Mattiazzo
Dipartimento di Fisica e Astronomia dell’Università and Sezione INFN
2 shared publications - Simone Gerardin
Department of Information Engineering, University of Padova, Padua, Italy
2 shared publications
Latest Publications
- Open Access
- 19 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Nuclear Science
- Vol. PP (00189499) , 1
TID Effects in Vertical SiC Power MOSFETs Irradiated at Different Temperatures
The capability to operate at high temperature of SiC power MOSFETs makes it essential to assess radiation-induced damage under realistic operating conditions to ensure reliable evaluations of device robustness. This study investigates the total ionizing dose (TID) effects induced by X-rays at different temperatures in vertical SiC power MOSFETs. Irradiation at high temperatures results in smaller threshold voltage (VTH) degradation than at room temperature, due to enhanced recombination of positively trapped charge during exposure. Nonetheless, when high-temperature annealing is performed after the exposure, the final threshold voltage shift (ΔVTH) is independent of the irradiation temperature, and solely dependent on the temperature selected for the annealing process. The negligible degradation observed in subthreshold swing, transconductance, and C-V stretch-out indicates minimal activation of interface traps at the SiC/SiO2 interface, confirming improved interface quality in the latest generation devices.
- 19 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Nuclear Science
- Vol. PP (00189499) , 1
Open AccessTID Effects in Vertical SiC Power MOSFETs Irradiated at Different Temperatures
The capability to operate at high temperature of SiC power MOSFETs makes it essential to assess radiation-induced damage under realistic operating conditions to ensure reliable evaluations of device robustness. This study investigates the total ionizing dose (TID) effects induced by X-rays at different temperatures in vertical SiC power MOSFETs. Irradiation at high temperatures results in smaller threshold voltage (VTH) degradation than at room temperature, due to enhanced recombination of positively trapped charge during exposure. Nonetheless, when high-temperature annealing is performed after the exposure, the final threshold voltage shift (ΔVTH) is independent of the irradiation temperature, and solely dependent on the temperature selected for the annealing process. The negligible degradation observed in subthreshold swing, transconductance, and C-V stretch-out indicates minimal activation of interface traps at the SiC/SiO2 interface, confirming improved interface quality in the latest generation devices.
- Open Access
- 27 November 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Nuclear Science
- Vol. 72 (8) , 2324-2332
Total-Ionizing-Dose and Displacement Damage Effects in Trench SiC Power MOSFETs
This study explores the total ionizing dose (TID) and displacement damage (DD) effects in trench silicon carbide (SiC) power MOSFETs. The effects of X-ray irradiation reveal significant negative shifts in the threshold voltage, particularly evident in devices biased with positive gate bias. The TID effects in those devices are visible at doses as low as 10 krad(SiO 2 ), indicating the higher TID sensitivity of trench devices compared to some planar counterparts. Exposure to 3-MeV protons leads to substantial reductions in drain current induced by a fall in the transconductance, while no damage to the gate oxide is observed up to doses of 50 Mrad(SiO 2 ). The substantial degradation of transconductance indicates DD, which become prominent at doses exceeding 10 Mrad(SiO 2 ). Both trench and planar devices exhibit similar DD-induced effects, suggesting a common underlying mechanism linked to defects within the epitaxial SiC layer.
- 27 November 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Nuclear Science
- Vol. 72 (8) , 2324-2332
Open AccessTotal-Ionizing-Dose and Displacement Damage Effects in Trench SiC Power MOSFETs
This study explores the total ionizing dose (TID) and displacement damage (DD) effects in trench silicon carbide (SiC) power MOSFETs. The effects of X-ray irradiation reveal significant negative shifts in the threshold voltage, particularly evident in devices biased with positive gate bias. The TID effects in those devices are visible at doses as low as 10 krad(SiO 2 ), indicating the higher TID sensitivity of trench devices compared to some planar counterparts. Exposure to 3-MeV protons leads to substantial reductions in drain current induced by a fall in the transconductance, while no damage to the gate oxide is observed up to doses of 50 Mrad(SiO 2 ). The substantial degradation of transconductance indicates DD, which become prominent at doses exceeding 10 Mrad(SiO 2 ). Both trench and planar devices exhibit similar DD-induced effects, suggesting a common underlying mechanism linked to defects within the epitaxial SiC layer.
- 8 December 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 68 (1) , 230-235
Influence of Process Variations on the Electrical Performance of SiC Power MOSFETs
The silicon carbide (SiC) power MOSFET is a promising solution for power electronics applications demanding high energy efficiency and high power density. For high-current applications, typically several transistors are operated in parallel, requiring synchronous switching. Commercial SiC power MOSFETs may, however, still show a significant performance spread in turn-on electrical behavior and, hence, lifetime in such a system. Based on a calibrated TCAD model of a commercial 1.2-kV SiC MOSFET, the impact of variations on the critical processing steps is evaluated. Controlling the epitaxial doping concentration as well as the interface trap density is most important for a low device-to-device variability. Furthermore, it is shown that the improvement of the output performance due to an increasing channel mobility quickly saturates.
- 8 December 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 68 (1) , 230-235
Influence of Process Variations on the Electrical Performance of SiC Power MOSFETs
The silicon carbide (SiC) power MOSFET is a promising solution for power electronics applications demanding high energy efficiency and high power density. For high-current applications, typically several transistors are operated in parallel, requiring synchronous switching. Commercial SiC power MOSFETs may, however, still show a significant performance spread in turn-on electrical behavior and, hence, lifetime in such a system. Based on a calibrated TCAD model of a commercial 1.2-kV SiC MOSFET, the impact of variations on the critical processing steps is evaluated. Controlling the epitaxial doping concentration as well as the interface trap density is most important for a low device-to-device variability. Furthermore, it is shown that the improvement of the output performance due to an increasing channel mobility quickly saturates.