Serhii Dieniezhnikov
Research Subjects
Research Interests
Serhii Dieniezhnikov has a total of 30 co-authors. Here are the top co-authors by number of shared publications:
- Serhii Pylypaka
National University of Life and Environmental Sciences of Ukraine
7 shared publications - Tatiana Volina
National University of Life and Environmental Sciences of Ukraine
7 shared publications - Iryna Hryshchenko
National University of Life and Environmental Sciences of Ukraine
4 shared publications - Mykhailo Kalenyk
Sumy state pedagogical University named after A.S. Makarenko
4 shared publications - Victor Nesvidomin
National University of Life and Environmental Sciences of Ukraine
3 shared publications - Iryna Rybenko
Sumy National Agrarian University
2 shared publications
Latest Publications
- 25 May 2026
- Published by Volodymyr Vynnychenko Central Ukrainian State Pedagogical University in Academic Notes. Series: Pedagogical Science
- Vol. 1 (223)
INFORMATION SYSTEM FOR RANKING OF WORK EFFICIENCY INDICATORS OF THE TEACHING STAFF
The article is devoted to the current problem of developing a structure of an information system for decision support, based on algorithms for planning the work of the teaching staff of the department, based on the use of optimization methods and interactive human-machine procedures and allowing to implement an automated approach in ranking work efficiency indicators. The purpose of the study is to substantiate the need to automate the calculations of evaluating and ranking the work efficiency indicators of the teaching staff of higher education institutions. The results of the conducted research allow: to provide the possibility of systematic storage, prompt adjustment, quick search and processing of information used in the process of planning the work of the department’s teaching staff; to increase the efficiency of the process of planning the work of the department’s teaching staff by providing the decision-maker with interactive program procedures that allow: to take an active part in the process of distributing work, to gradually analyze the progress of solving the problem and to evaluate the formed options for distributing work based on the criteria for assessing the quality of the work of the department’s teaching staff; to formalize and automate the process of ranking the performance indicators of the department’s teaching staff, which are included in the individual work plans of teachers and provided to the educational part (automation sector) of the higher education institution; to promptly, during the academic year, adjust the distribution of teachers’ work and changes in the volume and structure of the research and innovation activities of the department and its staff. The novelty of the proposed methodology for assessing the efficiency of the department’s teachers is that it allows for a comparative analysis of the volume of work between teachers within the strategic areas of the department’s activities, as well as a comparison of the work performed based on the information system and the integral criterion for assessing quality.
- 25 May 2026
- Published by Volodymyr Vynnychenko Central Ukrainian State Pedagogical University in Academic Notes. Series: Pedagogical Science
- Vol. 1 (223)
INFORMATION SYSTEM FOR RANKING OF WORK EFFICIENCY INDICATORS OF THE TEACHING STAFF
The article is devoted to the current problem of developing a structure of an information system for decision support, based on algorithms for planning the work of the teaching staff of the department, based on the use of optimization methods and interactive human-machine procedures and allowing to implement an automated approach in ranking work efficiency indicators. The purpose of the study is to substantiate the need to automate the calculations of evaluating and ranking the work efficiency indicators of the teaching staff of higher education institutions. The results of the conducted research allow: to provide the possibility of systematic storage, prompt adjustment, quick search and processing of information used in the process of planning the work of the department’s teaching staff; to increase the efficiency of the process of planning the work of the department’s teaching staff by providing the decision-maker with interactive program procedures that allow: to take an active part in the process of distributing work, to gradually analyze the progress of solving the problem and to evaluate the formed options for distributing work based on the criteria for assessing the quality of the work of the department’s teaching staff; to formalize and automate the process of ranking the performance indicators of the department’s teaching staff, which are included in the individual work plans of teachers and provided to the educational part (automation sector) of the higher education institution; to promptly, during the academic year, adjust the distribution of teachers’ work and changes in the volume and structure of the research and innovation activities of the department and its staff. The novelty of the proposed methodology for assessing the efficiency of the department’s teachers is that it allows for a comparative analysis of the volume of work between teachers within the strategic areas of the department’s activities, as well as a comparison of the work performed based on the information system and the integral criterion for assessing quality.
- Open Access
- 25 October 2024
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 5 (1 (131)) , 65-71
Constructing a model of the axis form in a S-shaped riser of a cultivator paw
When cultivating the soil, a force of resistance to the movement of cultivator paw acts on it. It has a variable value and causes a moment of force applied to the riser of the paw. Under the action of the moment, the elastic axis of the riser changes its shape. This affects the position of the paw in the soil. The form of an S-shaped riser whose elastic axis consists of two circle arcs has been considered in this study. During cultivator operation, one part of the riser bends, increasing the curvature of the elastic axis, and the other, on the contrary, unbends, that is, its curvature decreases. The modeling of the shape of the elastic axis of the paw riser is based on the theory of resistance of materials, according to which the curvature of the elastic axis of the cantilevered band is directly proportional to the applied moment and inversely proportional to its stiffness. If the shape of the cross-section of the riser along its entire length is unchanged and the properties of the metal are also the same, then the stiffness is constant. In the case of small deflections of the band, the linear theory of bending is used, but the deflections in the riser are significant, so the nonlinear theory has been used for this case. At the same time, it is taken into account that the elastic axis of the riser already has an initial curvature, the sign of which changes after passing through the point of connection of the component arcs. To model the shape of the elastic axis of the S-shaped paw riser, the deformation of the arcs of the circles that form this paw was calculated separately. Numerical integration methods were used to find the shape of the deformed elastic axes of both parts of the riser. They were connected into a whole and a deformed elastic axis of the S-shaped riser was obtained. Two variants of the riser with different lengths of their elastic axis, but the same height and the same angle of entry into the soil, were considered. The combination of the component arcs of the riser shows that, under the action of the same force, the deviation from the specified movement depth for one riser is 2 cm, and for the other – 4 cm.
- 25 October 2024
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 5 (1 (131)) , 65-71
Open AccessConstructing a model of the axis form in a S-shaped riser of a cultivator paw
When cultivating the soil, a force of resistance to the movement of cultivator paw acts on it. It has a variable value and causes a moment of force applied to the riser of the paw. Under the action of the moment, the elastic axis of the riser changes its shape. This affects the position of the paw in the soil. The form of an S-shaped riser whose elastic axis consists of two circle arcs has been considered in this study. During cultivator operation, one part of the riser bends, increasing the curvature of the elastic axis, and the other, on the contrary, unbends, that is, its curvature decreases. The modeling of the shape of the elastic axis of the paw riser is based on the theory of resistance of materials, according to which the curvature of the elastic axis of the cantilevered band is directly proportional to the applied moment and inversely proportional to its stiffness. If the shape of the cross-section of the riser along its entire length is unchanged and the properties of the metal are also the same, then the stiffness is constant. In the case of small deflections of the band, the linear theory of bending is used, but the deflections in the riser are significant, so the nonlinear theory has been used for this case. At the same time, it is taken into account that the elastic axis of the riser already has an initial curvature, the sign of which changes after passing through the point of connection of the component arcs. To model the shape of the elastic axis of the S-shaped paw riser, the deformation of the arcs of the circles that form this paw was calculated separately. Numerical integration methods were used to find the shape of the deformed elastic axes of both parts of the riser. They were connected into a whole and a deformed elastic axis of the S-shaped riser was obtained. Two variants of the riser with different lengths of their elastic axis, but the same height and the same angle of entry into the soil, were considered. The combination of the component arcs of the riser shows that, under the action of the same force, the deviation from the specified movement depth for one riser is 2 cm, and for the other – 4 cm.
- Open Access
- 21 August 2024
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 4 (1 (130)) , 37-44
Designing a helical knife for a shredding drum using a sweep surface
The object of this paper is a helical blade in a shredding drum from a sweep surface. Such drums are used in harvesters for crushing plant mass. If the flat blades are installed on the drum, cutting of the plant mass occurs simultaneously along the entire length of the blade. This could cause a pulsating dynamic load. If a flat knife with a straight blade is installed at an angle to the axis of the drum, then the distances from it to the points of the blade will be different, as well as the cutting conditions along the blade. The elliptical shape enables the same distance from the axis of rotation to the points of the blade, but this does not solve the problem. Many short flat knives with a straight blade can be mounted on the drum, placing them in such a way that the time between the individual knives is minimized. However, all these disadvantages can be eliminated by a helical knife with a blade in the form of a helical line. The design of a helical knife from an unfolding helicoid has been considered. In differential geometry, the bending of unfolded surfaces of zero thickness is considered. Bending of the workpiece into a finished product occurs with minimal plastic deformations, the magnitude of which depends on the thickness of the workpiece sheet. The methods of differential geometry of unfolding surfaces were applied to the analytical description of the surface of the helical knife. The parametric equations of the unfolding helicoid were derived according to the given structural parameters of the knife in space and on the plane. That has made it possible to mathematically describe the contour lines that cut the knife from the surface and on its sweep. Formulae for calculating a flat workpiece through the structural parameters of the knife have been derived. Thus, with the specified structural parameters of the knife R=0.25 m, τ=20°, φ=65°, according to the resulting formula, we find the radius of the knife blade on a flat workpiece: R0=4.8 m.
- 21 August 2024
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 4 (1 (130)) , 37-44
Open AccessDesigning a helical knife for a shredding drum using a sweep surface
The object of this paper is a helical blade in a shredding drum from a sweep surface. Such drums are used in harvesters for crushing plant mass. If the flat blades are installed on the drum, cutting of the plant mass occurs simultaneously along the entire length of the blade. This could cause a pulsating dynamic load. If a flat knife with a straight blade is installed at an angle to the axis of the drum, then the distances from it to the points of the blade will be different, as well as the cutting conditions along the blade. The elliptical shape enables the same distance from the axis of rotation to the points of the blade, but this does not solve the problem. Many short flat knives with a straight blade can be mounted on the drum, placing them in such a way that the time between the individual knives is minimized. However, all these disadvantages can be eliminated by a helical knife with a blade in the form of a helical line. The design of a helical knife from an unfolding helicoid has been considered. In differential geometry, the bending of unfolded surfaces of zero thickness is considered. Bending of the workpiece into a finished product occurs with minimal plastic deformations, the magnitude of which depends on the thickness of the workpiece sheet. The methods of differential geometry of unfolding surfaces were applied to the analytical description of the surface of the helical knife. The parametric equations of the unfolding helicoid were derived according to the given structural parameters of the knife in space and on the plane. That has made it possible to mathematically describe the contour lines that cut the knife from the surface and on its sweep. Formulae for calculating a flat workpiece through the structural parameters of the knife have been derived. Thus, with the specified structural parameters of the knife R=0.25 m, τ=20°, φ=65°, according to the resulting formula, we find the radius of the knife blade on a flat workpiece: R0=4.8 m.
- Open Access
- 30 April 2024
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 2 (7 (128)) , 24-30
Determining the shape of a flexible thread in the field of horizontal and vertical forces
In theoretical mechanics, the equilibrium of a flexible, inextensible thread is considered, to which the tension force of its ends and the distributed force of weight along the length of its arc are applied. An unsolved problem is finding the shape of the thread under the action of other distributed forces. This study has considered the equilibrium of a completely flexible thread, to which, in addition to this force, a transverse distributed force is applied. A sail serves as an example. Wind of equal intensity in the plane of the orthogonal section of the sail can be considered a distributed force. The sail can be cut into narrow strips with the same shape of the curves of the cross-section, which are equal to the cross-section of the sail as a whole. The theory of flexible thread is applied in the current study. The task is reduced to finding the curve of the cross-section of the sail. The object of research is the formation of a cylindrical surface from a flexible thread under the action of distributed forces applied to it. An important characteristic of the shape of a flexible thread is its curvature. Its dependence on the length of the arc was found and it was established that the found curve is a chain line (catenary). This is the feature of the current research and its distinguishing characteristics. The significance of the results stems from the derived analytical dependences, according to which the change in the ratio between the distributed forces acting on the flexible thread deforms it, but it retains the shape of the catenary. At the same time, the angle of deviation of its axis of symmetry from the vertical changes. In the absence of a horizontal distributed force and the presence of only a distributed force of weight, the axis of symmetry of the chain line is directed vertically – at an angle of 90° to the horizontal. If they are equal, this angle is 45°. Scope of application includes structures with stretched supporting wires, conveyor belts, flexible suspended ceilings, the shape of which can be calculated by using our results
- 30 April 2024
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 2 (7 (128)) , 24-30
Open AccessDetermining the shape of a flexible thread in the field of horizontal and vertical forces
In theoretical mechanics, the equilibrium of a flexible, inextensible thread is considered, to which the tension force of its ends and the distributed force of weight along the length of its arc are applied. An unsolved problem is finding the shape of the thread under the action of other distributed forces. This study has considered the equilibrium of a completely flexible thread, to which, in addition to this force, a transverse distributed force is applied. A sail serves as an example. Wind of equal intensity in the plane of the orthogonal section of the sail can be considered a distributed force. The sail can be cut into narrow strips with the same shape of the curves of the cross-section, which are equal to the cross-section of the sail as a whole. The theory of flexible thread is applied in the current study. The task is reduced to finding the curve of the cross-section of the sail. The object of research is the formation of a cylindrical surface from a flexible thread under the action of distributed forces applied to it. An important characteristic of the shape of a flexible thread is its curvature. Its dependence on the length of the arc was found and it was established that the found curve is a chain line (catenary). This is the feature of the current research and its distinguishing characteristics. The significance of the results stems from the derived analytical dependences, according to which the change in the ratio between the distributed forces acting on the flexible thread deforms it, but it retains the shape of the catenary. At the same time, the angle of deviation of its axis of symmetry from the vertical changes. In the absence of a horizontal distributed force and the presence of only a distributed force of weight, the axis of symmetry of the chain line is directed vertically – at an angle of 90° to the horizontal. If they are equal, this angle is 45°. Scope of application includes structures with stretched supporting wires, conveyor belts, flexible suspended ceilings, the shape of which can be calculated by using our results
- Open Access
- 31 October 2023
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 5 (7 (125)) , 60-69
Construction of mathematical model of particle movement by an inclined screw rotating in a fixed casing
Screw conveyors are used to move bulk materials vertically upwards, horizontally, and at an angle to the horizon. The processes that take place when particles are moved by a screw conveyor in vertical and horizontal directions have been studied. There is a significant difference between them: for transportation in the vertical direction, the necessary conditions must be ensured (sufficient angular speed of rotation of the screw), and for horizontal transportation, the movement of the particle occurs at any angular speed of rotation of the screw. Therefore, when changing the inclination of the axis of the screw, there comes a moment when transportation becomes possible, while it was impossible in the vertical direction. This paper considers the movement of a particle under the condition that it simultaneously contacts two surfaces: the moving surface of the screw and the stationary surface of the cylindrical casing in which the screw rotates. Their common line along which the particle slides is a helical line – the periphery of the screw. The particle slides along the helical line of the rotating screw, i.e., it is in relative motion with respect to it. At the same time, it slides along the surface of the casing, relative to which it is in absolute motion. The trajectory of the particle's absolute motion is its sliding track on the casing surface. When constructing differential equations of the relative motion of particles, the forces applied to the particle were taken into account. The initial position was taken to be the vertical direction of the screw to transport the particle upwards. If an auger in a cylindrical casing is tilted from the vertical direction to a certain angle, then all applied forces (except the force of weight) will also tilt to this angle. On the basis of this, generalized differential equations of the relative motion of a particle during its transportation by an inclined screw were built. They made it possible to derive a generalized mathematical model of the movement of a particle by an inclined screw that rotates inside a fixed casing
- 31 October 2023
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 5 (7 (125)) , 60-69
Open AccessConstruction of mathematical model of particle movement by an inclined screw rotating in a fixed casing
Screw conveyors are used to move bulk materials vertically upwards, horizontally, and at an angle to the horizon. The processes that take place when particles are moved by a screw conveyor in vertical and horizontal directions have been studied. There is a significant difference between them: for transportation in the vertical direction, the necessary conditions must be ensured (sufficient angular speed of rotation of the screw), and for horizontal transportation, the movement of the particle occurs at any angular speed of rotation of the screw. Therefore, when changing the inclination of the axis of the screw, there comes a moment when transportation becomes possible, while it was impossible in the vertical direction. This paper considers the movement of a particle under the condition that it simultaneously contacts two surfaces: the moving surface of the screw and the stationary surface of the cylindrical casing in which the screw rotates. Their common line along which the particle slides is a helical line – the periphery of the screw. The particle slides along the helical line of the rotating screw, i.e., it is in relative motion with respect to it. At the same time, it slides along the surface of the casing, relative to which it is in absolute motion. The trajectory of the particle's absolute motion is its sliding track on the casing surface. When constructing differential equations of the relative motion of particles, the forces applied to the particle were taken into account. The initial position was taken to be the vertical direction of the screw to transport the particle upwards. If an auger in a cylindrical casing is tilted from the vertical direction to a certain angle, then all applied forces (except the force of weight) will also tilt to this angle. On the basis of this, generalized differential equations of the relative motion of a particle during its transportation by an inclined screw were built. They made it possible to derive a generalized mathematical model of the movement of a particle by an inclined screw that rotates inside a fixed casing
- Open Access
- 30 June 2023
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 3 (1 (123)) , 6-12
Determining regularities in the construction of curves and surfaces using the Darboux trihedron
The Frénet trihedron, known in differential geometry, is accompanying for a spatial and, as a special case, for a flat curve. Its three mutually perpendicular unit orts are defined uniquely for any point on the curve except for some special ones. Unlike the Frénet trihedron, the Darboux trihedron relates to the surface. Two of its unit orts are located in a plane tangent to the surface, and the third is directed normally to the surface. It can also be accompanying for the curve, which is located on the surface. To this end, one of the orts in the plane tangent to the surface must be tangent to the curve. Trihedra are movable and, with respect to a fixed coordinate system, change their position due to movement and rotation. The object of research is the process of formation of curves and surfaces, as a result of the geometric sum of the bulk motion of the Darboux trihedron and the relative motion of the point in its system under given conditions. In the study of the geometric characteristics of curves and surfaces, it is necessary to have formulas for the transition from the position of the elements of these objects in the system of a moving trihedron to the position in a fixed Cartesian coordinate system. This is exactly what needs to be solved. The results obtained are parametric equations of curves and surfaces that are tied to the initial surface. Nine guide cosines were found, three for each ort. A distinctive feature of this approach in comparison with the traditional one is the use of two systems: fixed and mobile, which is the Darboux trihedron. This approach allows us to consider in a new way the problem of the construction of curves and surfaces. The scope of practical application can be the construction of geometric shapes on a given surface. An example of such a construction is the laying of a pipeline along a given line on the surface. In addition, the sum of the relative motion of a point in a trihedron and the bulk motion of the trihedron itself over the surface gives an absolute trajectory of motion. Its sequential differentiation produces absolute speed and absolute acceleration without finding individual components, including the Coriolis acceleration. This could be used in point dynamics problems
- 30 June 2023
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 3 (1 (123)) , 6-12
Open AccessDetermining regularities in the construction of curves and surfaces using the Darboux trihedron
The Frénet trihedron, known in differential geometry, is accompanying for a spatial and, as a special case, for a flat curve. Its three mutually perpendicular unit orts are defined uniquely for any point on the curve except for some special ones. Unlike the Frénet trihedron, the Darboux trihedron relates to the surface. Two of its unit orts are located in a plane tangent to the surface, and the third is directed normally to the surface. It can also be accompanying for the curve, which is located on the surface. To this end, one of the orts in the plane tangent to the surface must be tangent to the curve. Trihedra are movable and, with respect to a fixed coordinate system, change their position due to movement and rotation. The object of research is the process of formation of curves and surfaces, as a result of the geometric sum of the bulk motion of the Darboux trihedron and the relative motion of the point in its system under given conditions. In the study of the geometric characteristics of curves and surfaces, it is necessary to have formulas for the transition from the position of the elements of these objects in the system of a moving trihedron to the position in a fixed Cartesian coordinate system. This is exactly what needs to be solved. The results obtained are parametric equations of curves and surfaces that are tied to the initial surface. Nine guide cosines were found, three for each ort. A distinctive feature of this approach in comparison with the traditional one is the use of two systems: fixed and mobile, which is the Darboux trihedron. This approach allows us to consider in a new way the problem of the construction of curves and surfaces. The scope of practical application can be the construction of geometric shapes on a given surface. An example of such a construction is the laying of a pipeline along a given line on the surface. In addition, the sum of the relative motion of a point in a trihedron and the bulk motion of the trihedron itself over the surface gives an absolute trajectory of motion. Its sequential differentiation produces absolute speed and absolute acceleration without finding individual components, including the Coriolis acceleration. This could be used in point dynamics problems
- 25 May 2022
- Published by Springer Nature
- p. 112-122
Mathematical Model of Lifting Particles of Technological Material by Vertical Auger
- 25 May 2022
- Published by Springer Nature
- p. 112-122
Mathematical Model of Lifting Particles of Technological Material by Vertical Auger
- Open Access
- 1 January 2022
- Published by Springer Nature
- p. C1
Correction to: Mathematical Model of Lifting Particles of Technological Material by Vertical Auger
- 1 January 2022
- Published by Springer Nature
- p. C1
Open AccessCorrection to: Mathematical Model of Lifting Particles of Technological Material by Vertical Auger
- Open Access
- 1 May 2021
- Published by Amazonia Investiga in Revista Amazonia Investiga
- Vol. 10 (41) , 65-73
Modern demands of education quality management in a higher education institution
The article is devoted to the analysis of modern demands of education quality management in the conditions of higher education institution operation. The methodological basis of the study is the concept of management, based on a system of philosophical and general scientific doctrines about the quality of education and its specifics in higher education, the concept of personality-oriented learning, systems theory, modeling and development. The authors systematized methodological approaches to modeling the quality management system of education in higher education. The study developed a model of quality management, which is presented at the levels of: subsystems of management approaches, theoretical and methodological foundations, the value of the components and factors of education of different nature; defined a system of principles of internal quality management of higher education, aimed at performing a regulatory function at the general scientific, strategic, practice-oriented, technical, specific scientific and factor levels; an algorithm for building an education quality management system in a higher education institution is presented. It is shown that the quality management of education should be carried out at levels that ensure the manufacturability of the process, the possibility of its improvement with further analysis of the results and the adoption of appropriate management decisions.
- 1 May 2021
- Published by Amazonia Investiga in Revista Amazonia Investiga
- Vol. 10 (41) , 65-73
Open AccessModern demands of education quality management in a higher education institution
The article is devoted to the analysis of modern demands of education quality management in the conditions of higher education institution operation. The methodological basis of the study is the concept of management, based on a system of philosophical and general scientific doctrines about the quality of education and its specifics in higher education, the concept of personality-oriented learning, systems theory, modeling and development. The authors systematized methodological approaches to modeling the quality management system of education in higher education. The study developed a model of quality management, which is presented at the levels of: subsystems of management approaches, theoretical and methodological foundations, the value of the components and factors of education of different nature; defined a system of principles of internal quality management of higher education, aimed at performing a regulatory function at the general scientific, strategic, practice-oriented, technical, specific scientific and factor levels; an algorithm for building an education quality management system in a higher education institution is presented. It is shown that the quality management of education should be carried out at levels that ensure the manufacturability of the process, the possibility of its improvement with further analysis of the results and the adoption of appropriate management decisions.
- Open Access
- 1 January 2021
- Published by Publishing House Baltija Publishing
- p. 251-274
PECULIARITIES OF FORMATION OF VALUE ORIENTATIONS OF MODERN STUDENT YOUTH
New impetus for the advancement of pedagogical and psychological sciences in Ukraine and EU countries: research matters : Collective monograph. Riga, Latvia : “Baltija Publishing”, 2021. 864 p.
- 1 January 2021
- Published by Publishing House Baltija Publishing
- p. 251-274
Open AccessPECULIARITIES OF FORMATION OF VALUE ORIENTATIONS OF MODERN STUDENT YOUTH
New impetus for the advancement of pedagogical and psychological sciences in Ukraine and EU countries: research matters : Collective monograph. Riga, Latvia : “Baltija Publishing”, 2021. 864 p.