Construction of mathematical model of particle movement by an inclined screw rotating in a fixed casing
Authors:
- Tetiana VolinaTVTetiana Volina
- Serhii PylypakaSPSerhii Pylypaka
- Mykhailo KalenykMKMykhailo Kalenyk
- Serhii DieniezhnikovSDSerhii Dieniezhnikov
- Viktor NesvidominVNViktor Nesvidomin
- Iryna HryshchenkoIHIryna Hryshchenko
- Yana LytvynenkoYLYana Lytvynenko
- Artem BorodaiABArtem Borodai
- Dmytro BorodaiDBDmytro Borodai
- Yana BorodaiYBYana Borodai
Open Access
- 31 October 2023
- journal article
- research article
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 5 (7 (125)) , 60-69
Abstract
Screw conveyors are used to move bulk materials vertically upwards, horizontally, and at an angle to the horizon. The processes that take place when particles are moved by a screw conveyor in vertical and horizontal directions have been studied. There is a significant difference between them: for transportation in the vertical direction, the necessary conditions must be ensured (sufficient angular speed of rotation of the screw), and for horizontal transportation, the movement of the particle occurs at any angular speed of rotation of the screw. Therefore, when changing the inclination of the axis of the screw, there comes a moment when transportation becomes possible, while it was impossible in the vertical direction. This paper considers the movement of a particle under the condition that it simultaneously contacts two surfaces: the moving surface of the screw and the stationary surface of the cylindrical casing in which the screw rotates. Their common line along which the particle slides is a helical line – the periphery of the screw. The particle slides along the helical line of the rotating screw, i.e., it is in relative motion with respect to it. At the same time, it slides along the surface of the casing, relative to which it is in absolute motion. The trajectory of the particle's absolute motion is its sliding track on the casing surface. When constructing differential equations of the relative motion of particles, the forces applied to the particle were taken into account. The initial position was taken to be the vertical direction of the screw to transport the particle upwards. If an auger in a cylindrical casing is tilted from the vertical direction to a certain angle, then all applied forces (except the force of weight) will also tilt to this angle. On the basis of this, generalized differential equations of the relative motion of a particle during its transportation by an inclined screw were built. They made it possible to derive a generalized mathematical model of the movement of a particle by an inclined screw that rotates inside a fixed casingKeywords
This publication has 10 references indexed in Scilit:
- Determining regularities in the construction of curves and surfaces using the Darboux trihedronEastern-European Journal of Enterprise Technologies, 2023
- THE TRANSPORTATION OF THE MATERIAL PARTICLE BY THE VERTICAL AUGERAPPLIED GEOMETRY AND ENGINEERING GRAPHICS, 2022
- Methodology for refining the performance of screw conveyorScientific journal of the Ternopil national technical university, 2022
- Analysis of the Quality of Sulfomolybdenum Coatings Obtained by Electrospark Alloying MethodsMaterials, 2021
- The possibility to apply the Frenet trihedron and formulas for the complex movement of a point on a plane with the predefined plane displacementEastern-European Journal of Enterprise Technologies, 2021
- Numerical Modeling of Heat Transfer and Hydrodynamics in Compact Shifted Arrangement Small Diameter Tube Bundles2021
- Effect of Laser Processing on the Qualitative Parameters of Protective Abrasion-Resistant CoatingsPowder Metallurgy and Metal Ceramics, 2020
- Feasibility Study of Improving the Transport Performance by Means of Screw Conveyors with Rotary CasingsActa Technologica Agriculturae, 2019
- Conveyance of a particle by a vertical screw, which is limited by a coaxial fixed cylinderBULLETIN OF THE KARAGANDA UNIVERSITY-MATHEMATICS, 2019
- The cargo movement model by the screw conveyor surfaces with the rotating casingScientific journal of the Ternopil national technical university, 2019