Arjan Hensen
Research Subjects
Arjan Hensen has a total of 11 co-authors. Here are the top co-authors by number of shared publications:
- Jun Zhang
Netherlands Organisation for Applied Scientific Research (Delft, Netherlands)
6 shared publications Baye Thera
Environmental Modelling, Sensing & Analysis, TNO, Petten, 1755 LE, the Netherlands
5 shared publicationsDaniëlle van Dinther
Environmental Modelling, Sensing & Analysis, TNO, Petten, 1755 LE, the Netherlands
5 shared publications- Enrico Dammers
Netherlands Organization for Applied Scientific Research (TNO), Air Quality and Emissions Research (AER), Utrecht, The Netherlands
5 shared publications - Gerrit Jan de Bruin
Netherlands Organisation for Applied Scientific Research (TNO) Petten The Netherlands
5 shared publications - Ilona Velzeboer
Netherlands Organisation for Applied Scientific Research (TNO), Utrecht, the Netherlands
5 shared publications
Latest Publications
- Open Access
- 29 September 2026
- Published by Copernicus GmbH
- Vol. 2026, 1-37
Reply on RC2
A mobile atmospheric measurement platform combining an open-path ammonia (NH₃) analyzer (HT‑8700E) and a closed-path tunable infrared laser direct absorption spectroscopy (TILDAS) multi-gas system was deployed to enable simultaneous, high-frequency observations of NH₃, methane (CH₄), and carbon monoxide (CO) under real-world conditions. The open-path configuration minimizes inlet-related artefacts and enables fast-response NH₃ measurements. A comprehensive measurement framework is presented, including instrument integration, field calibration and validation using co-located reference measurements, data synchronization, plume identification, background removal, and plume-integrated enhancement analysis. The performance of the platform was evaluated during a 160 km mobile campaign in the Veluwe region of the Netherlands, a Natura 2000 nature reserve surrounded by intensive livestock farming. During the campaign, plumes from 49 individual sources and approximately 630 transient traffic-related events were detected, resolving short-lived concentration enhancements across agricultural, industrial, and traffic-dominated environments. Plume-integrated enhancement ratios (ΣNH₃:ΣCH₄) showed systematic differences among source types, with low ratios for livestock farms (∼0.04 for cattle and goats), intermediate values for industrial sources, and substantially higher ratios for manured fields (>2) and traffic plumes (>4). In addition, NH₃ emission factors derived for traffic increased with driving speed from approximately 0.12 g kg⁻¹ fuel at low speeds to ~0.28 g kg⁻¹ under highway conditions. These results demonstrate that simultaneous mobile measurements of NH₃, CH₄, and CO provide an effective approach for detecting and differentiating emission sources under real-world conditions. The combined observations reveal distinct source signatures and potential gaps in existing emission inventories. Although uncertainties remain due to atmospheric variability, calibration, limited temporal sampling, and overlap in source-specific ratios, the methodology shows strong potential for high-resolution characterization of heterogeneous NH₃ emissions through repeated mobile monitoring campaigns.
- 29 September 2026
- Published by Copernicus GmbH
- Vol. 2026, 1-37
Open AccessReply on RC2
A mobile atmospheric measurement platform combining an open-path ammonia (NH₃) analyzer (HT‑8700E) and a closed-path tunable infrared laser direct absorption spectroscopy (TILDAS) multi-gas system was deployed to enable simultaneous, high-frequency observations of NH₃, methane (CH₄), and carbon monoxide (CO) under real-world conditions. The open-path configuration minimizes inlet-related artefacts and enables fast-response NH₃ measurements. A comprehensive measurement framework is presented, including instrument integration, field calibration and validation using co-located reference measurements, data synchronization, plume identification, background removal, and plume-integrated enhancement analysis. The performance of the platform was evaluated during a 160 km mobile campaign in the Veluwe region of the Netherlands, a Natura 2000 nature reserve surrounded by intensive livestock farming. During the campaign, plumes from 49 individual sources and approximately 630 transient traffic-related events were detected, resolving short-lived concentration enhancements across agricultural, industrial, and traffic-dominated environments. Plume-integrated enhancement ratios (ΣNH₃:ΣCH₄) showed systematic differences among source types, with low ratios for livestock farms (∼0.04 for cattle and goats), intermediate values for industrial sources, and substantially higher ratios for manured fields (>2) and traffic plumes (>4). In addition, NH₃ emission factors derived for traffic increased with driving speed from approximately 0.12 g kg⁻¹ fuel at low speeds to ~0.28 g kg⁻¹ under highway conditions. These results demonstrate that simultaneous mobile measurements of NH₃, CH₄, and CO provide an effective approach for detecting and differentiating emission sources under real-world conditions. The combined observations reveal distinct source signatures and potential gaps in existing emission inventories. Although uncertainties remain due to atmospheric variability, calibration, limited temporal sampling, and overlap in source-specific ratios, the methodology shows strong potential for high-resolution characterization of heterogeneous NH₃ emissions through repeated mobile monitoring campaigns.
- Open Access
- 29 September 2026
- Published by Copernicus GmbH
- Vol. 2026, 1-37
Reply on RC1
A mobile atmospheric measurement platform combining an open-path ammonia (NH₃) analyzer (HT‑8700E) and a closed-path tunable infrared laser direct absorption spectroscopy (TILDAS) multi-gas system was deployed to enable simultaneous, high-frequency observations of NH₃, methane (CH₄), and carbon monoxide (CO) under real-world conditions. The open-path configuration minimizes inlet-related artefacts and enables fast-response NH₃ measurements. A comprehensive measurement framework is presented, including instrument integration, field calibration and validation using co-located reference measurements, data synchronization, plume identification, background removal, and plume-integrated enhancement analysis. The performance of the platform was evaluated during a 160 km mobile campaign in the Veluwe region of the Netherlands, a Natura 2000 nature reserve surrounded by intensive livestock farming. During the campaign, plumes from 49 individual sources and approximately 630 transient traffic-related events were detected, resolving short-lived concentration enhancements across agricultural, industrial, and traffic-dominated environments. Plume-integrated enhancement ratios (ΣNH₃:ΣCH₄) showed systematic differences among source types, with low ratios for livestock farms (∼0.04 for cattle and goats), intermediate values for industrial sources, and substantially higher ratios for manured fields (>2) and traffic plumes (>4). In addition, NH₃ emission factors derived for traffic increased with driving speed from approximately 0.12 g kg⁻¹ fuel at low speeds to ~0.28 g kg⁻¹ under highway conditions. These results demonstrate that simultaneous mobile measurements of NH₃, CH₄, and CO provide an effective approach for detecting and differentiating emission sources under real-world conditions. The combined observations reveal distinct source signatures and potential gaps in existing emission inventories. Although uncertainties remain due to atmospheric variability, calibration, limited temporal sampling, and overlap in source-specific ratios, the methodology shows strong potential for high-resolution characterization of heterogeneous NH₃ emissions through repeated mobile monitoring campaigns.
- 29 September 2026
- Published by Copernicus GmbH
- Vol. 2026, 1-37
Open AccessReply on RC1
A mobile atmospheric measurement platform combining an open-path ammonia (NH₃) analyzer (HT‑8700E) and a closed-path tunable infrared laser direct absorption spectroscopy (TILDAS) multi-gas system was deployed to enable simultaneous, high-frequency observations of NH₃, methane (CH₄), and carbon monoxide (CO) under real-world conditions. The open-path configuration minimizes inlet-related artefacts and enables fast-response NH₃ measurements. A comprehensive measurement framework is presented, including instrument integration, field calibration and validation using co-located reference measurements, data synchronization, plume identification, background removal, and plume-integrated enhancement analysis. The performance of the platform was evaluated during a 160 km mobile campaign in the Veluwe region of the Netherlands, a Natura 2000 nature reserve surrounded by intensive livestock farming. During the campaign, plumes from 49 individual sources and approximately 630 transient traffic-related events were detected, resolving short-lived concentration enhancements across agricultural, industrial, and traffic-dominated environments. Plume-integrated enhancement ratios (ΣNH₃:ΣCH₄) showed systematic differences among source types, with low ratios for livestock farms (∼0.04 for cattle and goats), intermediate values for industrial sources, and substantially higher ratios for manured fields (>2) and traffic plumes (>4). In addition, NH₃ emission factors derived for traffic increased with driving speed from approximately 0.12 g kg⁻¹ fuel at low speeds to ~0.28 g kg⁻¹ under highway conditions. These results demonstrate that simultaneous mobile measurements of NH₃, CH₄, and CO provide an effective approach for detecting and differentiating emission sources under real-world conditions. The combined observations reveal distinct source signatures and potential gaps in existing emission inventories. Although uncertainties remain due to atmospheric variability, calibration, limited temporal sampling, and overlap in source-specific ratios, the methodology shows strong potential for high-resolution characterization of heterogeneous NH₃ emissions through repeated mobile monitoring campaigns.
- Open Access
- 28 August 2026
- Published by Copernicus GmbH
- Vol. 2026, 1-37
Comment on egusphere-2026-2838
A mobile atmospheric measurement platform combining an open-path ammonia (NH₃) analyzer (HT‑8700E) and a closed-path tunable infrared laser direct absorption spectroscopy (TILDAS) multi-gas system was deployed to enable simultaneous, high-frequency observations of NH₃, methane (CH₄), and carbon monoxide (CO) under real-world conditions. The open-path configuration minimizes inlet-related artefacts and enables fast-response NH₃ measurements. A comprehensive measurement framework is presented, including instrument integration, field calibration and validation using co-located reference measurements, data synchronization, plume identification, background removal, and plume-integrated enhancement analysis. The performance of the platform was evaluated during a 160 km mobile campaign in the Veluwe region of the Netherlands, a Natura 2000 nature reserve surrounded by intensive livestock farming. During the campaign, plumes from 49 individual sources and approximately 630 transient traffic-related events were detected, resolving short-lived concentration enhancements across agricultural, industrial, and traffic-dominated environments. Plume-integrated enhancement ratios (ΣNH₃:ΣCH₄) showed systematic differences among source types, with low ratios for livestock farms (∼0.04 for cattle and goats), intermediate values for industrial sources, and substantially higher ratios for manured fields (>2) and traffic plumes (>4). In addition, NH₃ emission factors derived for traffic increased with driving speed from approximately 0.12 g kg⁻¹ fuel at low speeds to ~0.28 g kg⁻¹ under highway conditions. These results demonstrate that simultaneous mobile measurements of NH₃, CH₄, and CO provide an effective approach for detecting and differentiating emission sources under real-world conditions. The combined observations reveal distinct source signatures and potential gaps in existing emission inventories. Although uncertainties remain due to atmospheric variability, calibration, limited temporal sampling, and overlap in source-specific ratios, the methodology shows strong potential for high-resolution characterization of heterogeneous NH₃ emissions through repeated mobile monitoring campaigns.
- 28 August 2026
- Published by Copernicus GmbH
- Vol. 2026, 1-37
Open AccessComment on egusphere-2026-2838
A mobile atmospheric measurement platform combining an open-path ammonia (NH₃) analyzer (HT‑8700E) and a closed-path tunable infrared laser direct absorption spectroscopy (TILDAS) multi-gas system was deployed to enable simultaneous, high-frequency observations of NH₃, methane (CH₄), and carbon monoxide (CO) under real-world conditions. The open-path configuration minimizes inlet-related artefacts and enables fast-response NH₃ measurements. A comprehensive measurement framework is presented, including instrument integration, field calibration and validation using co-located reference measurements, data synchronization, plume identification, background removal, and plume-integrated enhancement analysis. The performance of the platform was evaluated during a 160 km mobile campaign in the Veluwe region of the Netherlands, a Natura 2000 nature reserve surrounded by intensive livestock farming. During the campaign, plumes from 49 individual sources and approximately 630 transient traffic-related events were detected, resolving short-lived concentration enhancements across agricultural, industrial, and traffic-dominated environments. Plume-integrated enhancement ratios (ΣNH₃:ΣCH₄) showed systematic differences among source types, with low ratios for livestock farms (∼0.04 for cattle and goats), intermediate values for industrial sources, and substantially higher ratios for manured fields (>2) and traffic plumes (>4). In addition, NH₃ emission factors derived for traffic increased with driving speed from approximately 0.12 g kg⁻¹ fuel at low speeds to ~0.28 g kg⁻¹ under highway conditions. These results demonstrate that simultaneous mobile measurements of NH₃, CH₄, and CO provide an effective approach for detecting and differentiating emission sources under real-world conditions. The combined observations reveal distinct source signatures and potential gaps in existing emission inventories. Although uncertainties remain due to atmospheric variability, calibration, limited temporal sampling, and overlap in source-specific ratios, the methodology shows strong potential for high-resolution characterization of heterogeneous NH₃ emissions through repeated mobile monitoring campaigns.
- Open Access
- 19 August 2026
- Published by Copernicus GmbH
- p. 1-37
Comment on egusphere-2026-2838
A mobile atmospheric measurement platform combining an open-path ammonia (NH₃) analyzer (HT‑8700E) and a closed-path tunable infrared laser direct absorption spectroscopy (TILDAS) multi-gas system was deployed to enable simultaneous, high-frequency observations of NH₃, methane (CH₄), and carbon monoxide (CO) under real-world conditions. The open-path configuration minimizes inlet-related artefacts and enables fast-response NH₃ measurements. A comprehensive measurement framework is presented, including instrument integration, field calibration and validation using co-located reference measurements, data synchronization, plume identification, background removal, and plume-integrated enhancement analysis. The performance of the platform was evaluated during a 160 km mobile campaign in the Veluwe region of the Netherlands, a Natura 2000 nature reserve surrounded by intensive livestock farming. During the campaign, plumes from 49 individual sources and approximately 630 transient traffic-related events were detected, resolving short-lived concentration enhancements across agricultural, industrial, and traffic-dominated environments. Plume-integrated enhancement ratios (ΣNH₃:ΣCH₄) showed systematic differences among source types, with low ratios for livestock farms (∼0.04 for cattle and goats), intermediate values for industrial sources, and substantially higher ratios for manured fields (>2) and traffic plumes (>4). In addition, NH₃ emission factors derived for traffic increased with driving speed from approximately 0.12 g kg⁻¹ fuel at low speeds to ~0.28 g kg⁻¹ under highway conditions. These results demonstrate that simultaneous mobile measurements of NH₃, CH₄, and CO provide an effective approach for detecting and differentiating emission sources under real-world conditions. The combined observations reveal distinct source signatures and potential gaps in existing emission inventories. Although uncertainties remain due to atmospheric variability, calibration, limited temporal sampling, and overlap in source-specific ratios, the methodology shows strong potential for high-resolution characterization of heterogeneous NH₃ emissions through repeated mobile monitoring campaigns.
- 19 August 2026
- Published by Copernicus GmbH
- p. 1-37
Open AccessComment on egusphere-2026-2838
A mobile atmospheric measurement platform combining an open-path ammonia (NH₃) analyzer (HT‑8700E) and a closed-path tunable infrared laser direct absorption spectroscopy (TILDAS) multi-gas system was deployed to enable simultaneous, high-frequency observations of NH₃, methane (CH₄), and carbon monoxide (CO) under real-world conditions. The open-path configuration minimizes inlet-related artefacts and enables fast-response NH₃ measurements. A comprehensive measurement framework is presented, including instrument integration, field calibration and validation using co-located reference measurements, data synchronization, plume identification, background removal, and plume-integrated enhancement analysis. The performance of the platform was evaluated during a 160 km mobile campaign in the Veluwe region of the Netherlands, a Natura 2000 nature reserve surrounded by intensive livestock farming. During the campaign, plumes from 49 individual sources and approximately 630 transient traffic-related events were detected, resolving short-lived concentration enhancements across agricultural, industrial, and traffic-dominated environments. Plume-integrated enhancement ratios (ΣNH₃:ΣCH₄) showed systematic differences among source types, with low ratios for livestock farms (∼0.04 for cattle and goats), intermediate values for industrial sources, and substantially higher ratios for manured fields (>2) and traffic plumes (>4). In addition, NH₃ emission factors derived for traffic increased with driving speed from approximately 0.12 g kg⁻¹ fuel at low speeds to ~0.28 g kg⁻¹ under highway conditions. These results demonstrate that simultaneous mobile measurements of NH₃, CH₄, and CO provide an effective approach for detecting and differentiating emission sources under real-world conditions. The combined observations reveal distinct source signatures and potential gaps in existing emission inventories. Although uncertainties remain due to atmospheric variability, calibration, limited temporal sampling, and overlap in source-specific ratios, the methodology shows strong potential for high-resolution characterization of heterogeneous NH₃ emissions through repeated mobile monitoring campaigns.
- Open Access
- 28 July 2026
- Published by Copernicus GmbH in EGUsphere
- Vol. 2026, 1-37
Novel mobile measurements of ammonia and methane: distinguishing agricultural and traffic sources in the Netherlands
A mobile atmospheric measurement platform combining an open-path ammonia (NH₃) analyzer (HT‑8700E) and a closed-path tunable infrared laser direct absorption spectroscopy (TILDAS) multi-gas system was deployed to enable simultaneous, high-frequency observations of NH₃, methane (CH₄), and carbon monoxide (CO) under real-world conditions. The open-path configuration minimizes inlet-related artefacts and enables fast-response NH₃ measurements. A comprehensive measurement framework is presented, including instrument integration, field calibration and validation using co-located reference measurements, data synchronization, plume identification, background removal, and plume-integrated enhancement analysis. The performance of the platform was evaluated during a 160 km mobile campaign in the Veluwe region of the Netherlands, a Natura 2000 nature reserve surrounded by intensive livestock farming. During the campaign, plumes from 49 individual sources and approximately 630 transient traffic-related events were detected, resolving short-lived concentration enhancements across agricultural, industrial, and traffic-dominated environments. Plume-integrated enhancement ratios (ΣNH₃:ΣCH₄) showed systematic differences among source types, with low ratios for livestock farms (∼0.04 for cattle and goats), intermediate values for industrial sources, and substantially higher ratios for manured fields (>2) and traffic plumes (>4). In addition, NH₃ emission factors derived for traffic increased with driving speed from approximately 0.12 g kg⁻¹ fuel at low speeds to ~0.28 g kg⁻¹ under highway conditions. These results demonstrate that simultaneous mobile measurements of NH₃, CH₄, and CO provide an effective approach for detecting and differentiating emission sources under real-world conditions. The combined observations reveal distinct source signatures and potential gaps in existing emission inventories. Although uncertainties remain due to atmospheric variability, calibration, limited temporal sampling, and overlap in source-specific ratios, the methodology shows strong potential for high-resolution characterization of heterogeneous NH₃ emissions through repeated mobile monitoring campaigns.
- 28 July 2026
- Published by Copernicus GmbH in EGUsphere
- Vol. 2026, 1-37
Open AccessNovel mobile measurements of ammonia and methane: distinguishing agricultural and traffic sources in the Netherlands
A mobile atmospheric measurement platform combining an open-path ammonia (NH₃) analyzer (HT‑8700E) and a closed-path tunable infrared laser direct absorption spectroscopy (TILDAS) multi-gas system was deployed to enable simultaneous, high-frequency observations of NH₃, methane (CH₄), and carbon monoxide (CO) under real-world conditions. The open-path configuration minimizes inlet-related artefacts and enables fast-response NH₃ measurements. A comprehensive measurement framework is presented, including instrument integration, field calibration and validation using co-located reference measurements, data synchronization, plume identification, background removal, and plume-integrated enhancement analysis. The performance of the platform was evaluated during a 160 km mobile campaign in the Veluwe region of the Netherlands, a Natura 2000 nature reserve surrounded by intensive livestock farming. During the campaign, plumes from 49 individual sources and approximately 630 transient traffic-related events were detected, resolving short-lived concentration enhancements across agricultural, industrial, and traffic-dominated environments. Plume-integrated enhancement ratios (ΣNH₃:ΣCH₄) showed systematic differences among source types, with low ratios for livestock farms (∼0.04 for cattle and goats), intermediate values for industrial sources, and substantially higher ratios for manured fields (>2) and traffic plumes (>4). In addition, NH₃ emission factors derived for traffic increased with driving speed from approximately 0.12 g kg⁻¹ fuel at low speeds to ~0.28 g kg⁻¹ under highway conditions. These results demonstrate that simultaneous mobile measurements of NH₃, CH₄, and CO provide an effective approach for detecting and differentiating emission sources under real-world conditions. The combined observations reveal distinct source signatures and potential gaps in existing emission inventories. Although uncertainties remain due to atmospheric variability, calibration, limited temporal sampling, and overlap in source-specific ratios, the methodology shows strong potential for high-resolution characterization of heterogeneous NH₃ emissions through repeated mobile monitoring campaigns.
- Open Access
- 4 March 2021
- Published by Copernicus GmbH
Low-cost airbox network and Gaussian plume modelling to assist air quality policy-making at the local scale: Shexian County, Hebei Province, China
High air pollution levels pose a threat to both human health and ecosystem vitality in Hebei Province, NE China. Although air quality changes are monitored hourly with high-end equipment at the provincial scale (197 stations for 187,693 km2) it is difficult for individual counties or cities to improve local air quality based on regional-scale information. The Sino-Dutch Technology Transfer & Training Project established a monitoring network of 43 low-cost air-boxes and 11 standard meteorological stations in Shexian county, Handan city (~ 1500 km2) to measure atmospheric concentrations of PM10, PM2.5, CO, SO2, NO2 and O3 at 1-min intervals from January 2020 onwards. Data from these stations were evaluated in real time using the TNO Gaussian plume model. The model provides point emission levels of PM10, PM2.5 and CO at 10-min intervals after calibration against measured concentrations. Based on a 2019 pollution source inventory, 21 major source areas were identified and used to derive an optimized source map for model input – including a large steel company, a coal-fueled power plant, different industrial complexes (cement, coking plant for ore smelting), as well as the densely populated city centre, rural residential areas, and a busy highway. The model performs source optimization using concentration data for all 43 stations and subsequently calculates the contributions of individual sources for each monitoring station to see to what extent the source map explained observed concentrations. Full network operation started in July 2020. Based on a one-month test period (August 2020), the steel company and coking plant were estimated to contribute ~25% of the total area’s PM-emissions. The central city area contributed ~10% and 17% of total PM- and CO-emissions, respectively, mostly due to construction activity and traffic. Repeating the exercise for the two provincial monitoring stations that also had high-end equipment in place in the downtown area gave inferred average urban contributions to measured concentrations as high as 60–62.5% for PM10 and PM2.5 versus 48% for CO. The steel factory contributed an estimated 9–11% for PM10 and PM2.5 at these locations and a cement factory 13% for CO. The combined results underline the importance of taking spatial variability of emission sources into explicit account in complex industrialized cities. Moreover, the combination of a low-cost airbox real-time monitoring network with emission apportionment modeling will allow local policy-makers to take proper actions towards reducing air pollution levels at the local scale.
- 4 March 2021
- Published by Copernicus GmbH
Open AccessLow-cost airbox network and Gaussian plume modelling to assist air quality policy-making at the local scale: Shexian County, Hebei Province, China
High air pollution levels pose a threat to both human health and ecosystem vitality in Hebei Province, NE China. Although air quality changes are monitored hourly with high-end equipment at the provincial scale (197 stations for 187,693 km2) it is difficult for individual counties or cities to improve local air quality based on regional-scale information. The Sino-Dutch Technology Transfer & Training Project established a monitoring network of 43 low-cost air-boxes and 11 standard meteorological stations in Shexian county, Handan city (~ 1500 km2) to measure atmospheric concentrations of PM10, PM2.5, CO, SO2, NO2 and O3 at 1-min intervals from January 2020 onwards. Data from these stations were evaluated in real time using the TNO Gaussian plume model. The model provides point emission levels of PM10, PM2.5 and CO at 10-min intervals after calibration against measured concentrations. Based on a 2019 pollution source inventory, 21 major source areas were identified and used to derive an optimized source map for model input – including a large steel company, a coal-fueled power plant, different industrial complexes (cement, coking plant for ore smelting), as well as the densely populated city centre, rural residential areas, and a busy highway. The model performs source optimization using concentration data for all 43 stations and subsequently calculates the contributions of individual sources for each monitoring station to see to what extent the source map explained observed concentrations. Full network operation started in July 2020. Based on a one-month test period (August 2020), the steel company and coking plant were estimated to contribute ~25% of the total area’s PM-emissions. The central city area contributed ~10% and 17% of total PM- and CO-emissions, respectively, mostly due to construction activity and traffic. Repeating the exercise for the two provincial monitoring stations that also had high-end equipment in place in the downtown area gave inferred average urban contributions to measured concentrations as high as 60–62.5% for PM10 and PM2.5 versus 48% for CO. The steel factory contributed an estimated 9–11% for PM10 and PM2.5 at these locations and a cement factory 13% for CO. The combined results underline the importance of taking spatial variability of emission sources into explicit account in complex industrialized cities. Moreover, the combination of a low-cost airbox real-time monitoring network with emission apportionment modeling will allow local policy-makers to take proper actions towards reducing air pollution levels at the local scale.