Edurne González
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Edurne González has a total of 94 co-authors. Here are the top co-authors by number of shared publications:
- Jose Adolfo Pomposo
Centro de Física de Materiales (CSIC-UPV/EHU), Materials Physics Center MPC, Paseo Manuel Lardizábal 5, 20018 Donostia−San Sebastián, Spain
8 shared publications - Jose Ramon Leiza
POLYMAT and Department of Applied Chemistry, Faculty of Chemistry, University of the Basque Country UPV/EHU, Joxe Mari Korta Center, Avenida Tolosa 72, 20018 Donostia-San Sebastián, Spain
7 shared publications - Maria Paulis
POLYMAT, Kimika Aplikatua saila, Kimika Fakultatea, University of the Basque Country UPV/EHU, Joxe Mari Korta Zentroa, Tolosa Hiribidea 72, 20018 Donostia-San Sebastián, Spain
7 shared publications - Mario Andres Martinez
University of the Basque Country UPV/EHU Paseo Manuel de Lardizabal 3
4 shared publications - Andrey Chuvilin
CIC nanoGUNE
3 shared publications Audrey Bonnefond
POLYMAT; University of the Basque Country UPV/EHU; Kimika Aplikatua Saila, Kimika Zientzien Fakultatea, Joxe Mari Korta Zentroa, Tolosa Hiribidea 72 20018 Donostia-San Sebastián Spain
3 shared publications
Latest Publications
- Open Access
- 10 November 2026
- Published by Elsevier in European Polymer Journal
- Vol. 262
Biobased latexes using cardanol methacrylate: Exploring the effect of curing conditions on film properties
- 10 November 2026
- Published by Elsevier in European Polymer Journal
- Vol. 262
Open AccessBiobased latexes using cardanol methacrylate: Exploring the effect of curing conditions on film properties
- Open Access
- 16 October 2026
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 18 (42) , 58269-58279
Surface-Functionalized Nanofibers via Green Electrospinning: A Sustainable Platform for Enzyme Immobilization
In this work, we present a sustainable and efficient approach for the fabrication of surface-functionalized nanofibers via green electrospinning, an aqueous-based technique that employs polymer latexes and eliminates the need for organic solvents. Three carboxylic acid and one epoxy-functionalized latexes were synthesized through seeded semibatch emulsion polymerization using acrylic acid and glycidyl methacrylate as functional comonomers, alongside methyl methacrylate and butyl acrylate as the main monomers. The resulting latexes were blended with polyvinyl alcohol (PVA) as a sacrificial template polymer and electrospun into continuous nanofibers. The obtained nanofibers were thermally annealed at 80 °C to promote particle coalescence, followed by water treatment to remove the PVA, yielding homogeneous nanofibers with accessible surface functional groups. The accessibility and reactivity of the surface functional groups were demonstrated through the covalent immobilization of cutinase via NHS-ester and epoxy–amine coupling reactions, yielding stable and catalytically active biocatalytic nanofibers. Carboxylic acid-functionalized nanofibers showed immobilization yields of 10–18% and specific activities of 100–200 µmol min–1 mg–1. In contrast, epoxy-functionalized nanofibers exhibited a lower immobilization yield of approximately 5% but a substantially higher specific activity of approximately 330 µmol min–1 mg–1. This lower enzyme loading may favor a less densely packed immobilization, reducing steric constraints and improving enzyme accessibility and catalytic efficiency. Moreover, the epoxy-functionalized nanofiber mats exhibited enhanced operational and storage stability, significantly extending the lifetime of the immobilized biocatalyst. This approach provides a straightforward and environmentally friendly route to produce functional nanofibers without the use of organic solvents or post-spinning chemical modification steps, offering significant potential for applications in biosensing, biocatalysis, biomedical engineering, and environmental remediation.
- 16 October 2026
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 18 (42) , 58269-58279
Open AccessSurface-Functionalized Nanofibers via Green Electrospinning: A Sustainable Platform for Enzyme Immobilization
In this work, we present a sustainable and efficient approach for the fabrication of surface-functionalized nanofibers via green electrospinning, an aqueous-based technique that employs polymer latexes and eliminates the need for organic solvents. Three carboxylic acid and one epoxy-functionalized latexes were synthesized through seeded semibatch emulsion polymerization using acrylic acid and glycidyl methacrylate as functional comonomers, alongside methyl methacrylate and butyl acrylate as the main monomers. The resulting latexes were blended with polyvinyl alcohol (PVA) as a sacrificial template polymer and electrospun into continuous nanofibers. The obtained nanofibers were thermally annealed at 80 °C to promote particle coalescence, followed by water treatment to remove the PVA, yielding homogeneous nanofibers with accessible surface functional groups. The accessibility and reactivity of the surface functional groups were demonstrated through the covalent immobilization of cutinase via NHS-ester and epoxy–amine coupling reactions, yielding stable and catalytically active biocatalytic nanofibers. Carboxylic acid-functionalized nanofibers showed immobilization yields of 10–18% and specific activities of 100–200 µmol min–1 mg–1. In contrast, epoxy-functionalized nanofibers exhibited a lower immobilization yield of approximately 5% but a substantially higher specific activity of approximately 330 µmol min–1 mg–1. This lower enzyme loading may favor a less densely packed immobilization, reducing steric constraints and improving enzyme accessibility and catalytic efficiency. Moreover, the epoxy-functionalized nanofiber mats exhibited enhanced operational and storage stability, significantly extending the lifetime of the immobilized biocatalyst. This approach provides a straightforward and environmentally friendly route to produce functional nanofibers without the use of organic solvents or post-spinning chemical modification steps, offering significant potential for applications in biosensing, biocatalysis, biomedical engineering, and environmental remediation.
- Open Access
- 9 August 2026
- Published by Elsevier in Journal of Environmental Chemical Engineering
- Vol. 14 (5)
Fabrication of photocatalytic nanofibers by suspension electrospinning
- 9 August 2026
- Published by Elsevier in Journal of Environmental Chemical Engineering
- Vol. 14 (5)
Open AccessFabrication of photocatalytic nanofibers by suspension electrospinning
- Open Access
- 6 July 2026
- Published by Springer Nature in Journal of Coatings Technology and Research
- Vol. 23 (6) , 2981-2995
Comblike copolymers with star conformation as dispersants of pigments in waterborne paint formulations
Although the interaction between inorganic pigment particles and polymeric dispersing agents has been widely studied, their direct influence on the performance of fully formulated paints remains underexplored. In this work, we investigate, for the first time, the use of comblike copolymers as dispersants for inorganic pigments in waterborne coatings. These copolymers are synthesized in aqueous solution via free radical copolymerization of methacrylic acid (MAA) and poly(ethylene glycol) methacrylate (PEGMA), yielding a targeted starlike architecture. These copolymers are thoroughly characterized by nuclear magnetic resonance (NMR), size exclusion chromatography with multiangle light scattering and refractive index detectors (SEC/MALS/RI), and small-angle X-ray scattering (SAXS). The newly developed copolymers are then integrated into waterborne paint formulations, replacing conventional linear dispersants. Using latex binders with varying functionalities, we evaluate the resulting film properties. Our findings show that while binder functionality significantly affects the final coating performance, the use of comblike copolymers consistently enhances hydrophobicity and improves the protective performance of the coatings, particularly in anticorrosive systems, without compromising optical properties.
- 6 July 2026
- Published by Springer Nature in Journal of Coatings Technology and Research
- Vol. 23 (6) , 2981-2995
Open AccessComblike copolymers with star conformation as dispersants of pigments in waterborne paint formulations
Although the interaction between inorganic pigment particles and polymeric dispersing agents has been widely studied, their direct influence on the performance of fully formulated paints remains underexplored. In this work, we investigate, for the first time, the use of comblike copolymers as dispersants for inorganic pigments in waterborne coatings. These copolymers are synthesized in aqueous solution via free radical copolymerization of methacrylic acid (MAA) and poly(ethylene glycol) methacrylate (PEGMA), yielding a targeted starlike architecture. These copolymers are thoroughly characterized by nuclear magnetic resonance (NMR), size exclusion chromatography with multiangle light scattering and refractive index detectors (SEC/MALS/RI), and small-angle X-ray scattering (SAXS). The newly developed copolymers are then integrated into waterborne paint formulations, replacing conventional linear dispersants. Using latex binders with varying functionalities, we evaluate the resulting film properties. Our findings show that while binder functionality significantly affects the final coating performance, the use of comblike copolymers consistently enhances hydrophobicity and improves the protective performance of the coatings, particularly in anticorrosive systems, without compromising optical properties.
- Open Access
- 24 June 2026
- Published by Elsevier in SSRN Electronic Journal
Fabrication of photocatalytic nanofibers by Green Electrospinning
Green Electrospinning was employed to fabricate photocatalytic nanofibers designed for environmental remediation. To this end, methyl methacrylate/n‐butyl acrylate (MMA/BA) copolymer particles stabilized with ultrafine titanium dioxide nanoparticles (TiO2 NPs) were synthesized via miniemulsion polymerization. Two latexes with a solids content of 40 wt % were prepared, containing 10 and 20 wt % TiO2 NPs (based on monomers). These latexes were successfully electrospun using polyvinyl alcohol (PVA) as a template polymer, with a minimum PVA concentration of 30 wt % required to obtain continuous nanofibers. The resulting fibers contained only 3 and 6 wt % TiO2 NPs . Since TiO2 NPs were strongly adsorbed onto the polymer particle´s surface, an excellent distribution of the NPs along the nanofibers (without any aggregation) was guaranteed. The hybrid nanofibers were subsequently crosslinked to enhance their water stability. Their photocatalytic performance was evaluated through methylene blue (MB) degradation and Escherichia coli (E. coli) inactivation tests. In both cases, the nanofibers exhibited significantly higher activity than corresponding films, attributable to their much larger surface area to volume ratio. Additionally, increasing the TiO2 NPs content improved both MB degradation and bacterial inactivation efficiency. Moreover, the nanofibers demonstrated good reusability. Overall, this work highlights the potential of Green Electrospinning as a solvent‐free approach to produce highly photocatalytic nanofibers capable of removing organic pollutants and pathogenic bacteria from water.
- 24 June 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessFabrication of photocatalytic nanofibers by Green Electrospinning
Green Electrospinning was employed to fabricate photocatalytic nanofibers designed for environmental remediation. To this end, methyl methacrylate/n‐butyl acrylate (MMA/BA) copolymer particles stabilized with ultrafine titanium dioxide nanoparticles (TiO2 NPs) were synthesized via miniemulsion polymerization. Two latexes with a solids content of 40 wt % were prepared, containing 10 and 20 wt % TiO2 NPs (based on monomers). These latexes were successfully electrospun using polyvinyl alcohol (PVA) as a template polymer, with a minimum PVA concentration of 30 wt % required to obtain continuous nanofibers. The resulting fibers contained only 3 and 6 wt % TiO2 NPs . Since TiO2 NPs were strongly adsorbed onto the polymer particle´s surface, an excellent distribution of the NPs along the nanofibers (without any aggregation) was guaranteed. The hybrid nanofibers were subsequently crosslinked to enhance their water stability. Their photocatalytic performance was evaluated through methylene blue (MB) degradation and Escherichia coli (E. coli) inactivation tests. In both cases, the nanofibers exhibited significantly higher activity than corresponding films, attributable to their much larger surface area to volume ratio. Additionally, increasing the TiO2 NPs content improved both MB degradation and bacterial inactivation efficiency. Moreover, the nanofibers demonstrated good reusability. Overall, this work highlights the potential of Green Electrospinning as a solvent‐free approach to produce highly photocatalytic nanofibers capable of removing organic pollutants and pathogenic bacteria from water.
- Open Access
- 15 October 2025
- Published by Wiley in Macromolecular Materials and Engineering
- Vol. 310 (12)
Strategies to Improve the Water Resistance of Nanofibers Obtained by Suspension Electrospinning
Suspension Electrospinning involves electrospinning a latex (an aqueous dispersion of polymer particles) with the help of a water‐soluble template polymer. This method is promising as it enables the spinning of hydrophobic polymers using water as an electrospinning medium, thereby eliminating the need for toxic organic solvents. However, Suspension Electrospinning presents some challenges, as the use of a template polymer is necessary to form continuous fibers, but increasing its amount reduces the fibers´ water resistance. This work focuses on producing water‐resistant nanofibers by optimizing template concentration and exploring new strategies. The minimum template concentration needed to produce uniform, water‐resistant nanofibers from a monomodal acrylic latex is identified. Additionally, a high solids content bimodal acrylic latex is spun for the first time, enhancing process productivity and allowing a 50% reduction in the template polymer compared to the monomodal system. Two additional novel strategies are employed to increase the water resistance of the nanofibers: thermal cross‐linking of a carboxylic acid functionalized latex with polyvinyl alcohol (PVA) and spinning a high glass transition temperature latex followed by its coalescence before the template removal. Finally, the effectiveness of PVA and polyethylene oxide (PEO) as template polymers is compared.
- 15 October 2025
- Published by Wiley in Macromolecular Materials and Engineering
- Vol. 310 (12)
Open AccessStrategies to Improve the Water Resistance of Nanofibers Obtained by Suspension Electrospinning
Suspension Electrospinning involves electrospinning a latex (an aqueous dispersion of polymer particles) with the help of a water‐soluble template polymer. This method is promising as it enables the spinning of hydrophobic polymers using water as an electrospinning medium, thereby eliminating the need for toxic organic solvents. However, Suspension Electrospinning presents some challenges, as the use of a template polymer is necessary to form continuous fibers, but increasing its amount reduces the fibers´ water resistance. This work focuses on producing water‐resistant nanofibers by optimizing template concentration and exploring new strategies. The minimum template concentration needed to produce uniform, water‐resistant nanofibers from a monomodal acrylic latex is identified. Additionally, a high solids content bimodal acrylic latex is spun for the first time, enhancing process productivity and allowing a 50% reduction in the template polymer compared to the monomodal system. Two additional novel strategies are employed to increase the water resistance of the nanofibers: thermal cross‐linking of a carboxylic acid functionalized latex with polyvinyl alcohol (PVA) and spinning a high glass transition temperature latex followed by its coalescence before the template removal. Finally, the effectiveness of PVA and polyethylene oxide (PEO) as template polymers is compared.
- 27 March 2025
- Published by American Chemical Society (ACS) in Macromolecules
- Vol. 58 (7) , 3369-3376
Model-Guided and Scalable Approach to Synthesize Snowman Polymer Particles
- 27 March 2025
- Published by American Chemical Society (ACS) in Macromolecules
- Vol. 58 (7) , 3369-3376
Model-Guided and Scalable Approach to Synthesize Snowman Polymer Particles
- 10 May 2023
- Published by Udako Euskal Unibertsitatea
Petrolio eta bio iturrietatik eratorritako monomeroen konparaketa estaldura jasangarrien garapenerako
Petrolio eta bio iturrietatik eratorritako monomeroen konparaketa estaldura jasangarrien garapenerako produkzioaren informazio-fitxa
- 10 May 2023
- Published by Udako Euskal Unibertsitatea
Petrolio eta bio iturrietatik eratorritako monomeroen konparaketa estaldura jasangarrien garapenerako
Petrolio eta bio iturrietatik eratorritako monomeroen konparaketa estaldura jasangarrien garapenerako produkzioaren informazio-fitxa
- 10 May 2023
- Published by Udako Euskal Unibertsitatea
Nano-zuntz berri eta erabilgarrien fabrikazioa electrospinning jasangarriaren bidez
Nano-zuntz berri eta erabilgarrien fabrikazioa electrospinning jasangarriaren bidez produkzioaren informazio-fitxa
- 10 May 2023
- Published by Udako Euskal Unibertsitatea
Nano-zuntz berri eta erabilgarrien fabrikazioa electrospinning jasangarriaren bidez
Nano-zuntz berri eta erabilgarrien fabrikazioa electrospinning jasangarriaren bidez produkzioaren informazio-fitxa
- 10 May 2023
- Published by Udako Euskal Unibertsitatea
Epoxi ur-dispertsioak estaldura antikorrosiboetan
Epoxi ur-dispertsioak estaldura antikorrosiboetan produkzioaren informazio-fitxa
- 10 May 2023
- Published by Udako Euskal Unibertsitatea
Epoxi ur-dispertsioak estaldura antikorrosiboetan
Epoxi ur-dispertsioak estaldura antikorrosiboetan produkzioaren informazio-fitxa