Babak Manafi
Research Subjects
Babak Manafi has a total of 18 co-authors. Here are the top co-authors by number of shared publications:
- Mehdi Saeidi
Department of Mechanical Engineering, Auckland University of Technology, Auckland, New Zealand
5 shared publications - Karen Abrinia
University of Tehran
3 shared publications - Ghader Faraji
School of Mechanical Engineering, College of Engineering, University of Tehran, Tehran, Iran
2 shared publications M. Sanei
Islamic Azad University
2 shared publicationsV. Shatermashhadi
Islamic Azad University
2 shared publicationsAbolfazl Masoumi
Tehran , Iran
1 shared publication
Latest Publications
- 8 March 2017
- Published by Springer Nature in The International Journal of Advanced Manufacturing Technology
- Vol. 92 (1-4) , 1081-1091
A preliminary study on the feasibility of forward extrusion with variable angular cross section
- 8 March 2017
- Published by Springer Nature in The International Journal of Advanced Manufacturing Technology
- Vol. 92 (1-4) , 1081-1091
A preliminary study on the feasibility of forward extrusion with variable angular cross section
- 21 February 2017
- Published by Walter de Gruyter GmbH in Materials Testing
- Vol. 59 (3) , 265-271
Influence of U-O bending process parameters on the friction coefficient
The U-O bending process is a manufacturing method for the production of pipes with large diameters and its manufacturing operations comprised of C forming, forming the plate into U shape, forming U into O shape, welding and expansion. With regard to the forming mechanism at O forming step, friction and wear influence the process. In this study, the effect of friction on the forming load has been studied. For this purpose, the influence of factors such as bending radius in the U forming step and the quality of surface roughness for several plate thicknesses on the forming load have been investigated by means of analytical and numerical modeling. Based on the results, proper selection of the initial bending radius in the U forming step is one of the most effective factors in reducing the friction force. Also, the reduction of the friction factor between the workpiece and the die has a significant impact on decreasing the pressing force. The results of the numerical modeling based on the finite element method and the analytical analysis have been compared, and the maximum error obtained was 8.6 %.
- 21 February 2017
- Published by Walter de Gruyter GmbH in Materials Testing
- Vol. 59 (3) , 265-271
Influence of U-O bending process parameters on the friction coefficient
The U-O bending process is a manufacturing method for the production of pipes with large diameters and its manufacturing operations comprised of C forming, forming the plate into U shape, forming U into O shape, welding and expansion. With regard to the forming mechanism at O forming step, friction and wear influence the process. In this study, the effect of friction on the forming load has been studied. For this purpose, the influence of factors such as bending radius in the U forming step and the quality of surface roughness for several plate thicknesses on the forming load have been investigated by means of analytical and numerical modeling. Based on the results, proper selection of the initial bending radius in the U forming step is one of the most effective factors in reducing the friction force. Also, the reduction of the friction factor between the workpiece and the die has a significant impact on decreasing the pressing force. The results of the numerical modeling based on the finite element method and the analytical analysis have been compared, and the maximum error obtained was 8.6 %.
- 9 January 2016
- Published by Springer Nature in The International Journal of Advanced Manufacturing Technology
- Vol. 86 (5-8) , 1367-1374
Development of a novel severe plastic deformation method: friction stir equal channel angular pressing
- 9 January 2016
- Published by Springer Nature in The International Journal of Advanced Manufacturing Technology
- Vol. 86 (5-8) , 1367-1374
Development of a novel severe plastic deformation method: friction stir equal channel angular pressing
- 16 November 2015
- Published by Walter de Gruyter GmbH in Materials Testing
- Vol. 57 (11-12) , 992-996
Influences of pin profile on the macrostructure and mechanical properties of friction stir welded AA6061-T6 alloy T-joints
Friction stir welding is a solid-state process in which the joining operation is performed while the base materials are not melted and they are merely plasticized. In this study, friction stir welding of the AA 6061-T6 aluminum alloy T-joint has been studied and the influences of the tool pin profile on the macrostructure and mechanical properties of the joints have been investigated. Accordingly, three different pin profiles, such as straight cylindrical, taper cylindrical and square have been utilized. Then the joints have been examined using macroscopic images. Also, the joints have been investigated by tensile and hardness tests. As obtained from the results, the fabricated joints by the cylindrical pin exhibited the maximum tensile strength and hardness due to the homogeneity of material flow and the lack of defects.
- 16 November 2015
- Published by Walter de Gruyter GmbH in Materials Testing
- Vol. 57 (11-12) , 992-996
Influences of pin profile on the macrostructure and mechanical properties of friction stir welded AA6061-T6 alloy T-joints
Friction stir welding is a solid-state process in which the joining operation is performed while the base materials are not melted and they are merely plasticized. In this study, friction stir welding of the AA 6061-T6 aluminum alloy T-joint has been studied and the influences of the tool pin profile on the macrostructure and mechanical properties of the joints have been investigated. Accordingly, three different pin profiles, such as straight cylindrical, taper cylindrical and square have been utilized. Then the joints have been examined using macroscopic images. Also, the joints have been investigated by tensile and hardness tests. As obtained from the results, the fabricated joints by the cylindrical pin exhibited the maximum tensile strength and hardness due to the homogeneity of material flow and the lack of defects.
- 11 July 2015
- Published by Springer Nature in The International Journal of Advanced Manufacturing Technology
- Vol. 82 (9-12) , 1823-1830
Development of a novel bulk plastic deformation method: hydrostatic backward extrusion
- 11 July 2015
- Published by Springer Nature in The International Journal of Advanced Manufacturing Technology
- Vol. 82 (9-12) , 1823-1830
Development of a novel bulk plastic deformation method: hydrostatic backward extrusion
- 11 March 2015
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture
- Vol. 230 (7) , 1284-1294
Mathematical modeling and optimization of friction stir welding process parameters in AA5083 and AA7075 aluminum alloy joints
In this study, dissimilar joints of AA5083-H116 and AA7075-T6 aluminum alloys were successfully made by friction stir welding technique. The microstructure and mechanical behavior of the welded joints were investigated at different rotational and traverse speeds. A mathematical modeling was developed to demonstrate a relationship between the friction stir welding parameters and the ultimate tensile strength of the dissimilar joints. Then, the mathematical modeling was optimized by genetic algorithm in order to find the optimum condition in which the maximum tensile strength of welded joints can be achieved. Eventually, genetic algorithm results confirmed that the maximum tensile strength of welded joints is achievable in rotational and traverse speeds of 500 r/min and 50 mm/min, respectively. The maximum error between experimental data and predicted model was less than 1%.
- 11 March 2015
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture
- Vol. 230 (7) , 1284-1294
Mathematical modeling and optimization of friction stir welding process parameters in AA5083 and AA7075 aluminum alloy joints
In this study, dissimilar joints of AA5083-H116 and AA7075-T6 aluminum alloys were successfully made by friction stir welding technique. The microstructure and mechanical behavior of the welded joints were investigated at different rotational and traverse speeds. A mathematical modeling was developed to demonstrate a relationship between the friction stir welding parameters and the ultimate tensile strength of the dissimilar joints. Then, the mathematical modeling was optimized by genetic algorithm in order to find the optimum condition in which the maximum tensile strength of welded joints can be achieved. Eventually, genetic algorithm results confirmed that the maximum tensile strength of welded joints is achievable in rotational and traverse speeds of 500 r/min and 50 mm/min, respectively. The maximum error between experimental data and predicted model was less than 1%.
- 20 February 2015
- Published by Walter de Gruyter GmbH in Journal of Polymer Engineering
- Vol. 35 (7) , 675-687
Study on the deformation behavior of polyamide under the backward extrusion process
This study explores the deformation behavior of polyamide in the process of backward extrusion at room temperature by both finite element (FE) and design of experiment (DOE) procedures. The distributions of effective strain through the length and the thickness of processed polyamide tube by cold backward extrusion are investigated and compared with ductile metals. The die parameters are comprised of slope angle, corner radius of punch and container which are selected as input parameters. The Taguchi DOE approach is exploited in order to decrease repeated simulations, after which 16 results are carried out. Analysis of variance is performed on simulation results, and it is proved that the corner radius of punch has the greatest effect among die parameters in the mentioned process, in reducing the processing load. The influence of this parameter is obtained as 98%. Eventually, the optimum condition is proposed. Also, the deformation behavior and the probability of failure based on the normalized Cockroft-Latham criterion are studied under this condition.
- 20 February 2015
- Published by Walter de Gruyter GmbH in Journal of Polymer Engineering
- Vol. 35 (7) , 675-687
Study on the deformation behavior of polyamide under the backward extrusion process
This study explores the deformation behavior of polyamide in the process of backward extrusion at room temperature by both finite element (FE) and design of experiment (DOE) procedures. The distributions of effective strain through the length and the thickness of processed polyamide tube by cold backward extrusion are investigated and compared with ductile metals. The die parameters are comprised of slope angle, corner radius of punch and container which are selected as input parameters. The Taguchi DOE approach is exploited in order to decrease repeated simulations, after which 16 results are carried out. Analysis of variance is performed on simulation results, and it is proved that the corner radius of punch has the greatest effect among die parameters in the mentioned process, in reducing the processing load. The influence of this parameter is obtained as 98%. Eventually, the optimum condition is proposed. Also, the deformation behavior and the probability of failure based on the normalized Cockroft-Latham criterion are studied under this condition.
- 10 February 2015
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications
- Vol. 230 (1) , 311-318
Study on ultrafine-grained aluminum matrix nanocomposite joint fabricated by friction stir welding
The aim of this study is to investigate the effect of adding Al2O3 nanoparticles on the properties of joints fabricated by friction stir welding. The joints were characterized by optical microscopy, scanning electron microscopy, dry sliding wear test, and potentiodynamic polarization test. The results show that the average grain size was reduced in the nugget zone after the addition of nanoparticles. The produced welds were also found to have adequate wear and corrosion resistance. This work demonstrates that adding Al2O3 nanoparticle is an effective strategy for improving the properties of the joints produced by friction stir welding.
- 10 February 2015
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications
- Vol. 230 (1) , 311-318
Study on ultrafine-grained aluminum matrix nanocomposite joint fabricated by friction stir welding
The aim of this study is to investigate the effect of adding Al2O3 nanoparticles on the properties of joints fabricated by friction stir welding. The joints were characterized by optical microscopy, scanning electron microscopy, dry sliding wear test, and potentiodynamic polarization test. The results show that the average grain size was reduced in the nugget zone after the addition of nanoparticles. The produced welds were also found to have adequate wear and corrosion resistance. This work demonstrates that adding Al2O3 nanoparticle is an effective strategy for improving the properties of the joints produced by friction stir welding.
- 1 October 2014
- Published by Elsevier in Materials & Design (1980-2015)
- Vol. 62, 361-366
Development of a novel method for the backward extrusion
- 1 October 2014
- Published by Elsevier in Materials & Design (1980-2015)
- Vol. 62, 361-366
Development of a novel method for the backward extrusion