TRTina Rückriemen-Bez

Tina Rückriemen-Bez

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Tina Rückriemen-Bez has a total of 57 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Thermal modeling for asteroid surface characterization: Apophis as a case study

    by B. Aussel, B. Gundlach, C. Schuckart, T. Rückriemen-Bez, C. Güttler, M. Patzek

    Context . The characterization of asteroidal surfaces is of great importance for understanding asteroid formation and evolution as well as for spacecraft landing site selection. Global thermal inertia estimates are available for many asteroids, which can be used to determine material parameters of the surface structure. Specific thermal inertia values can be explained by different surface structures, such as regolith consisting of individual grains or porous rocks. Aims . We analyze these cases for the Sq-type asteroid Apophis using the published thermal inertia measurement to derive grain sizes and rock porosities. We also assess their effect on the diurnal temperature evolution. Methods . First, we derived these quantities for different surface structure models by comparing the modeled thermal conductivity with the published global thermal inertia estimate. Second, we applied a one-dimensional numerical thermophysical model to compute the corresponding diurnal temperature curves of Apophis’ surface. Results . For the best-fit thermal inertia, we derived mean regolith grain radii of 13–28 mm and up to 25–57 mm when assuming an additional grain volume filling factor of 50%. For a porous rock surface, we find volume filling factors of 0.722 and 0.777. When also considering a hierarchical pore structure and radiative heat transport within the macro pores, we obtain macro filling factors of 0.728–0.879. The macro filling factors decrease when assuming larger pore space diameters. We observe that a regolith and a porous rock surface can be distinguished by their nighttime cooling curves, with the largest temperature differences occurring at sunrise. Conclusions . Measurements of the nighttime temperature evolution allow for the discrimination of the surface structure by remote sensing techniques. A quantitative interpretation of specific surface locations will, however, require accounting for topography, surface roughness, and the exact local rotation history.

  • Open Access

    Ice-Shell Dynamics of Ganymede and Europa and Their Impact on Heat Flux, Brines, and Lithospheric Strength

    by Tina Rückriemen-Bez, Ana-Catalina Plesa

    Icy moons and their cryo- and hydrospheres are central to the search for subsurface habitable environments in the Solar System (e.g., [1]). Their outer ice shells are of particular importance because they are the most accessible targets for exploration, act as a conduit between the surface and the subsurface ocean, and may themselves host potential niches for life. Understanding the thermal, dynamic, and mechanical state of these ice shells is therefore essential for interpreting spacecraft observations and assessing astrobiological potential.In this work, we investigate solid-state convection in ice shells spanning a wide range of thicknesses, focusing on thin shells (10–50 km) representative of Europa and thicker shells (50–170 km) characteristic of Ganymede. Ice shell dynamics are modeled using the GAIA convection code [2]. Building on recent studies [3,4], we incorporate temperature-dependent thermal conductivity, temperature- and pressure-dependent thermal expansivity (α), and a composite flow law for ice that accounts for multiple deformation mechanisms [5]. For Europa-like scenarios, we additionally include tidal heating, which constitutes a major internal heat source [6].Our analysis systematically explores the influence of constant ice grain size, which directly controls viscosity and is a key parameter governing ice shell dynamics. For each combination of shell thickness and grain size, we assess the convective regime and characterize the resulting thermal structure. We find that Europa-like ice shells remain convective for grain sizes up to approximately 1 mm, whereas Ganymede-like ice shells can sustain convection for grain sizes on the order of several centimeters. In the case of Europa, however, this threshold strongly depends on the magnitude of tidal heating: enhanced tidal dissipation significantly promotes convection and allows convective behavior to persist even for larger grain sizes.For moderately convecting ice shells, the stagnant lid thickness is typically on the order of 30% of the total ice shell thickness. Heat fluxes at both the surface and the ice–ocean interface increase with decreasing shell thickness, while basal heat fluxes show pronounced lateral variability linked to convective flow patterns. We further investigate the stability of brines within the ice shell and find that NaCl- and NH₃-rich brines can persist throughout the convective domain, with NH₃-bearing brines potentially remaining stable even within the stagnant lid, depending on the convective regime.Finally, we evaluate the lithospheric strength of the ice shell, which is relevant for future exploration concepts such as ice-penetrating melt probes [7]. Overall, our results provide constraints on the dynamic, thermal, and mechanical state of Europa’s and Ganymede’s ice shells and support the interpretation of data from current and upcoming missions.References:[1] Coustenis & Encrenaz et al., 2013. [2] Hüttig et al., 2013. [3] Carnahan et al. 2021. [4] Harel et al. 2020. [5] Goldsby and Kohlstedt, 2001. [6] Tobie et al., 2003. [7] Rhoden et al. 2026.

  • Open Access

    The Modular Computational Simulation Interface (MoCSI) code

    by C. Schuckart, B. Aussel, T. Rückriemen-Bez, C. Güttler, B. Gundlach

    Context. With many different missions to small bodies and (icy) moons currently ongoing or on the horizon, modern thermophysical models for planetary science need to be able to be adapted to quickly changing parameters and science objectives. Aims. We aim to develop the public and open-source Modular Computational Simulation Interface ( MoCSI ) code to offer a fully modular thermophysical model that can be applied to asteroids and to a wide variety of dry, airless bodies in the future. Further, we intend to compare MoCSI to established thermophysical models and show a proof-of-concept application to the Kolobok crater on the asteroid (162173) Ryugu. Methods. MoCSI employs a finite element method (FEM) to solve the one-dimensional transient heat-transfer equation. Physical variables, for example thermal conductivity, bulk density, or incoming radiative flux, and different model behavior, for example dynamic time-step reduction, can be implemented through modules that the user can turn on and off to suit their science case. Results. There is good agreement between MoCSI and the two published models 1DTM and heat1d to within < 1 K or 5 % during specific time-steps. The proof-of-concept application showed close agreement with the established literature. Conclusions. MoCSI ’s modular code base allows for rapid adaption, not only to different physical applications, but also to the use of different types of thermophysical models. It can be expanded to refine results and to include new physical descriptions and numerical methods. Ongoing development is planned to further improve performance and expand the available list of modules.


  • Open Access

    Ice Data Hub - A Crowdsourced Approach to Compile Terrestrial Analog and Ice Property Data for Icy Moons Exploration Activities

    by Julia Kowalski, Ana-Catalina Plesa, Marc Boxberg, Jacob Buffo, Mark Fox-Powell, Klara Kalousová, Johanna Kerch, Maria-Gema Llorens, Maurine Montagnat, Soroush Motahari, et al.

    Ice is omnipresent in our Solar System: on Earth, on different planetary bodies, and on icy moons in the outer Solar System. Quite a number of those icy bodies feature subglacial water reservoirs under global ice shells, some of which may even host cryo-habitats. In addition, on the moons Europa and Enceladus the ocean is thought to be in contact with the rocky interior leading to water-rock processes potentially similar to the ones at the ocean floor on the Earth and making these two bodies highly relevant targets for planetary exploration. Space exploration missions, such as JUICE and Europa Clipper missions which are currently on their way to the Jupiter system, will allow us to further characterize cryo-environmental conditions on icy moons. Lander missions are likely to follow should a high habitability potential be identified. In order to prepare for both the interpretation of data acquired by Europa Clipper and JUICE, and for the design of future lander missions, it is of crucial importance to exploit any possible synergy between the various cryosphere research communities. In the past, terrestrial and extraterrestrial cryosphere research mostly developed as independent research fields whereas synergies may shed light on both fields. In fact, close cooperation across different cryosphere research communities is a necessary prerequisite for designing future planetary exploration missions. An in-depth knowledge of similarities and differences between ice regimes on Earth and hypothesized physical regimes on icy moons will pave the way for optimized information retrieval from mission data and allow to effectively orchestrate terrestrial analogue field test, lab experiments, and model-based design for lander technology development. An accessible database that provides information on available datasets, e.g., regarding activities at terrestrial analogue sites, dedicated lab experiments or ice properties is not available to date or maintained by the community.The International Space Science Institute (ISSI) team ‘Bridging the gap: From terrestrial to icy moons cryospheres’ [1] started its work in 2023 and brings together scientists and engineers with different terrestrial and extra-terrestrial cryosphere expertise. The overall goal of the project is to make knowledge hidden in the vast amounts of existing data from different cryosphere research groups accessible to the community. This should be achieved by consolidating information from existing data sets into comprehensive, moderated open access compilations. More specifically, the team focusses on two types of data compilations, namelya collection of experimental and theoretical work regarding ice properties along with their implicit assumptions and ranges of applicability, and a compilation of published work conducted at terrestrial analogues sites along with their relevance for icy moons exploration. Here, we will introduce the project and its rationale, and describe our approach to selecting and compiling the data. Most importantly, we will show how the community can contribute to and benefit from the data collection.Acknowledgement: This research was supported by the International Space Science Institute (ISSI) in Bern, through ISSI International Team project #23-589 Bridging the gap: From terrestrial to icy moons cryospheres.References: [1] https://teams.issibern.ch/icymoonscryospheres/


  • Open Access

    Icy realms compared: Global ice shell dynamics of Ganymede and Europa

    by Tina Rückriemen-Bez, Ana-Catalina Plesa

    Icy moons and their cryo-/hydrospheres are central to the search for subsurface habitable environments in the solar system (e.g., [1]). While the structure of internal ice and liquid water layers varies with the moon’s size, an outer ice shell is a common feature. Smaller moons, like Europa, typically have a thin ice shell overlaying a liquid ocean, whereas larger moons, like Ganymede, possess a thicker ice shell, burying the ocean deeper beneath the surface. The outer ice layer is particularly significant: it is the most accessible for exploration, serves as a conduit between the surface and subsurface ocean, and may itself harbor niches for life. Understanding its thermal and dynamic state is essential for interpreting mission data and assessing astrobiological potential.In this work, we compare thin (10–40 km, e.g., Europa) and thick (50–200 km, e.g., Ganymede) ice shells, focusing on their impact on thermal and dynamic properties. We model ice shell dynamics using the GAIA convection code [2], building on recent studies [3,4] to incorporate temperature-dependent thermal conductivity (k), temperature- and pressure-dependent thermal expansivity ($\alpha$), and a complex rheology. We also examine tidal heating, a significant factor for Europa [5].Our analysis explores various ice grain sizes, which influence the viscosity—a critical parameter for ice shell dynamics. Key model outputs that can be tested with future measurements include elastic thickness, brittle-to-ductile transition, boundary heat flux, and potential formation of brines. Furthermore, scaling laws relating heat loss and convection vigor, as well as the creep mechanism that dominates the deformation help us to characterize the ice shell dynamic regime (i.e., conductive, weakly convective, or highly convective). By distinguishing dynamic regimes, we aim to advance our understanding of icy worlds, the heat and material transport through their icy shells, and their potential for habitability.References:[1] Coustenis & Encrenaz et al., 2013. [2] Hüttig et al., 2013. [3] Carnahan et al. 2021. [4] Harel et al. 2020. [5] Tobie et al., 2003.

  • Open Access

    Exploring Enceladus: The Science Case for Future Radar Sounder Measurements

    by Hauke Hussmann, William Byrne, Ana-Catalina Plesa, Tina Rückriemen-Bez, Andreas Benedikter

    One of the major questions in planetary exploration concerns the habitability of icy moons in the outer Solar System. These bodies can harbor liquid water in substantial amounts over long time-scales, a necessary ingredient for habitable environments. Water on icy moons is located in global oceans in the subsurface, beneath a global ice shell, and/or in local reservoirs within this ice shell. Moreover, some of the satellites, in particular Europa and Enceladus and perhaps also Triton and the largest Moons of Uranus, may provide the ‘right’ chemistry because of an ocean-silicate interface in their interior. The latter allows for rock-water interaction potentially bringing chemical compounds (CHNOPS) in contact with liquid water. Due to tidal friction, which can be an important heat source in the moons’ interiors, energy that drives chemical cycles would be available and sustained over time. Among the icy moons, Enceladus is a high priority target for planetary explorations due to its high astrobiological potential. Based on the current knowledge from mission data and theoretical modeling, Enceladus provides compelling evidence for the presence of a global ocean, tidal energy as a heat source, hydrothermal processes at the ocean floor, current surface activity and a young surface, as well as possible existence of shallow water reservoirs and complex chemistry. In fact, Enceladus is recommended as the top priority target in ESA’s Voyage 2050 plan covering the science theme “Moons of the Giant Planets” [1], with a subsurface radar sounder in the core payload of such a mission. Radar sounders are the obvious means to detect and characterize subsurface water reservoirs on icy moons [2]. They can determine the ice-water interface and variations thereof, detect near-surface water reservoirs, study the connection of the ocean with the shallow subsurface/surface, and characterize the layering of the upper ice crust, e.g. snow, ice regolith, or compact ice that can help to understand the past evolution (intensity of jet activity and geological history).In this study we focus on the scientific goals of a radar sounder at Enceladus. We discuss the ice shell characteristics (thickness and variations, thermal structure, and layering) and their effects on the radar attenuation. We calculate the two-way radar attenuation on Enceladus considering a conductive ice shell covered by a porous thermally insulating surface layer. Our models show that for regions covered by a thick insulating porous surface layer (∼700 m, [3]) a radar signal will not be able to reach the ice-ocean interface. However, for these same regions the high subsurface temperatures caused by a strong insulation due to the thick porous layer increase the likelihood that shallow brines are present [4]. Such brine reservoirs are fundamental to characterize habitable environments in the shallow subsurface, and the potential to directly access them with future measurements is much greater when compared to the accessibility of subsurface oceans [5].References:[1] Martins et al. (2024); [2] Benedikter et al., this meeting; [3] Martin et al. (2023); [4] Byrne et al. (2024); [5] Wolfenbarger et al. (2022).

  • Open Access

    A journey across scales: Two-phase models for Europa’s icy mantle

    by Benjamin Terschanski, Tina Rückriemen-Bez, Ana-Catalina Plesa, Julia Kowalski

    Europa, one of Jupiter's moons, is a prime target in the search for habitability within the solar system (e.g., [1]). While the greatest potential for life lies in the interaction between a hypothesized liquid ocean and the rocky mantle—similar to Earth's deep-sea hydrothermal vents—the outer ice shell also plays a critical role. This shell could either aid in the detection of life or serve as a potential habitat itself.In both scenarios, the transport of brine liquids is key: at the sub-kilometer-scale ice-ocean interface (localized brine intake) and across the planetary-scale ice shell (global brine transport). Despite the vast differences in spatial and temporal scales, these processes require models that account for the interplay between two phases (solid and liquid), the presence of solutes (salts), and phase changes.Within the terrestrial and extraterrestrial cryosphere research community, two-phase flow models have been independently developed. They describe processes such as mushy layer dynamics (e.g., [3]) and, more recently, global ice shell behavior involving pure water ice (e.g., [4]). Established models are often derived from a common system of conservation laws, but a variety of different simplifying assumptions makes it challenging to compare and connect them consistently.In this work, we present a unified framework for deriving process models applicable to different scales, from mushy layers to global ice shells. We begin by outlining the homogenized conservation laws for mass, momentum, energy, and solute (salt), operating under the assumption of equilibrium solidification.Subsequently, we perform a scaling analysis to develop two-phase flow models tailored to both planetary-scale ice shells and sub-kilometer-scale mushy layers, which represent the ice-ocean interface. These derived models will be systematically compared to existing published models, with a particular focus on addressing the equilibrium thermochemistry problem in the context of the significant pressure variations encountered across planetary ice shells.References:[1] Coustenis & Encrenaz et al., 2013. [2] Nisbet and Sleep, 2001. [3] Katz and Worster, 2008, [4] Kalousova et al., 2018.

  • Open Access

    Gravity and topography signatures of shallow water bodies in the subsurface of Europa and Ganymede

    by Julia Maia, Pietro Matteoni, Ana-Catalina Plesa, Tina Rückriemen-Bez, Frank Postberg, Hauke Hussmann

    The Jupiter moons Ganymede and Europa are prime targets for icy moons exploration by ESA’s JUICE and NASA’s Europa Clipper missions [1,2]. Future measurements by JUICE and Europa Clipper will provide key information about the ice shell structure and the depth of the subsurface oceans of these moons. While the ocean itself is the largest water body beneath the surface, liquid brine reservoirs may be present locally within the ice shell, in the shallow subsurface. These reservoirs may represent niches for habitability that may provide ideal targets for exploration because of their location close to the surface.Evidence for the presence of shallow water reservoirs within the ice shell of Europa has been presented in a recent study that performed detailed geomorphological-structural investigations of Menec Fossae [3]. The observed tectonic activity in this region on Europa could be related to a shallow water pocket located close to the surface that would explain the observed overall topography of this area in addition to the presence of specific geological features such as chaos terrain and double ridges. On Ganymede, possible past cryovolcanic activity was suggested in a few isolated spots on the surface, the so-called “scalloped depressions” (“paterae”), which have been interpreted as possible caldera-like features [4] and could be potentially sourced from shallow water bodies. While the low-resolution data currently available prevents a precise characterization, age estimates, and composition of these regions, future measurements by JUICE will reveal the origin and formation mechanism of Ganymede’s paterae.In this work, we perform numerical modeling of the outer ice shell of Ganymede and Europa to test the expected gravity and topography signatures of shallow water bodies. We vary the size and location beneath the surface of such reservoirs. Moreover, since the composition and physical state (i.e., liquid state or solidified state) of such reservoirs is poorly constrained but affects the density in these regions, we test different values for density anomalies. In our models, we assume that these reservoirs are located within the conductive part of the ice shell, close to the surface. In order to quantify the effect of large-scale dynamics on the gravity and topography signal induced by shallow density anomalies, we test scenarios in which the entire ice shell is purely conductive (no additional density anomalies) and cases where the deeper ice shell is convective (additional density anomalies due to solid-state convection).Our models will provide scenarios that can be tested with current data, where resolution permits, and help to interpret future measurements. This will help us to locally constrain the structure of the ice shell and determine the presence of shallow water bodies in the subsurface of Ganymede and Europa.References:[1] Grasset et al. (2013), PSS. https://doi.org/10.1016/j.pss.2012.12.002[2] Pappalardo et al. (2024), SSR. https://doi.org/10.1007/s11214-024-01070-5[3] Matteoni et al. (2023), JGR: Planets. https://doi.org/10.1029/2022JE007623[4] Stephan et al. (2021), PSS. https://doi.org/10.1016/j.pss.2021.105324

  • Open Access

    A Distributed Radar Sounder Concept for Subsurface Exploration of Saturn's Moon Enceladus: Feasibility and Potential

    by Andreas Benedikter, Ana-Catalina Plesa, Jalal Matar, Hauke Hussmann, Masaki Nagai, Tobias Otto, Taruna Parihar, William Byrne, Tina Rückriemen-Bez, Eduardo Rodrigues-Silva, et al.

    Since the very first observations of the Moon, radars have been more and more employed as payloads of planetary exploration missions, in various operational modes like altimeters, SARs or radar sounders. Especially radar sounders provide unique measurement capabilities for the subsurface exploration of planetary bodies, as demonstrated by the MARSIS and SHARAD instruments and planned for the REASON [1] and RIME [2] instruments of the Europa Clipper and Juice missions, aimed on the exploration of Jupiter’s icy moons. Radar sounders are nadir-looking sensors that transmit pulsed electromagnetic radiation that propagates through the subsurface due to its relatively low frequency. Each dielectric discontinuity in the ground material reflects part of the signal towards the radar. The analysis of the recorded echoes provides crucial information on the subsurface structure and composition. Despite the capability of achieving good performances, the abovementioned instruments are limited by the almost omnidirectional antenna characteristic of dipole antennas that are commonly used because of the large antenna size at low frequencies. Due to the omnidirectional characteristic, surface clutter, i.e., spurious signals from off-nadir directions, is collected that potentially masks the signal of interest coming from subsurface layers in nadir direction, thus hindering the subsurface data interpretation.To overcome those limitations, we investigate the feasibility and potential of a distributed radar sounder satellite configuration for an Enceladus mission scenario, in the frame of an ESA study. Distributed radar sounding configurations have been already proposed for Earth Observation of icy regions (e.g., the STRATUS concept [3]). Such a formation flying satellite configuration allows for synthesizing a large antenna array that potentially provides the following advantages with respect to a traditional radar sounding configuration: 1) suppress the surface clutter through beamforming techniques, 2) increase the signal to noise ratio, 3) possibility of exploiting interferometric techniques for subsurface DEM generation and clutter interpretation, and 4) possibility of performing 3D tomographic imaging of the subsurface.We present an analysis of a distributed HF-band radar sounder for the subsurface exploration of Enceladus including 1) a science case derivation, 2) orbit and formation implications, 3) radar operational concepts, 4) instrument and satellite system architecture implications, and 5) performance assessment. The formation consists of up to 7 satellites, one complex mother satellite (~1.5 tons) implementing the radar signal transmission and other power and mass demanding functionalities (e.g., communication, down-link, data storage, on-board processing), and the other satellites (~200 kg) implementing transponder functionalities that receive the radar echoes and forward it to the mother satellite in a MirrorSAR [4] configuration. A main criticality is the strongly perturbed gravitational environment at Enceladus [5] posing challenges on the orbits and the formation flying capabilities. Potential orbit and formation concepts are presented as well as a performance assessment for the subsurface sounder exploration of Enceladus based on the envisioned satellite formation, attenuation and backscatter models, different operational concepts, and different beamforming approaches.References:[1] Blankenship et al., 2009. [2] Bruzzone et al., 2013. [3] Bruzzone et al., 2021. [4] Krieger et al., 2017. [5] Benedikter et al., 2022.


  • Open Access

    Constraining the interior structure and thermal state of Venus

    by Michaela Walterová, Ana-Catalina Plesa, Philipp Baumeister, Tina Rückriemen-Bez, Frank W. Wagner, Doris Breuer

    Often termed the twin sister of the Earth, Venus represents an alternative outcome of the evolutionary path taken by large terrestrial planets. Given its extreme surface conditions, lack of surface water, and the absence of plate tectonics, the present-day thermal state of its mantle is likely very different from the Earth. Venus also remains the most enigmatic of terrestrial worlds in terms of interior structure. Both its tidal Love number k2 and the moment of inertia factor, the main sources of information on the core size and interior structure, are known with a large uncertainty of about 10% [1, 2], and the magnitude of tidal dissipation, sensitive to the planet’s thermal state, has only been determined indirectly [e.g., 3]. Yet, the set of observables acquired by the Magellan and Pioneer Venus Orbiter missions can still be used to put constraints on the interior structure.In this study, we perform a Bayesian inversion of several observational and theoretical constraints (such as the tidal Love number, maximum elastic thickness, or absence of intrinsic magnetic field) to gain insight into the present-day interior structure and thermal state of Venus. This is done by combining the calculation of a global tidal deformation with a 1d parameterised model of mantle convection in the stagnant-lid regime [4,5]. The convection model is based on the thermal boundary layer theory and incorporates partial melting, crustal growth, and inner core crystallization. The elastic structure of the mantle for three selected mineralogical models is obtained from the software Perple_X, based on the minimisation of Gibbs free energy [6]. Finally, to find the tidal parameters, we calculate the deformation of a layered compressible viscoelastic sphere [7]. The mantle is described by the Andrade rheological model, which has proven essential for distinguishing between a fully solid and a fully or partially liquid Venusian core [8]. We vary a large set of rheological, structural, and thermodynamic parameters and predict a range of mantle temperatures consistent with previous stagnant-lid models, average mantle viscosities between 1020-1022 Pa.s, and a tidal quality factor of Q=50+74-24, corresponding to a phase lag of 1.12+1.06-0.67 degrees. Additionally, we discuss how the future measurements of the tidal deformation and the moment of inertia of Venus from EnVision [9] and VERITAS (Venus Emissivity, Radio Science, InSAR, Topography, and Spectroscopy) [10] can improve our understanding of the planet's interior.[1] Konopliv & Yoder (1995), doi:10.1029/96GL01589.[2] Margot et al. (2021), doi:10.1038/s41550-021-01339-7.[3] Correia & Laskar (2003), doi:10.1016/S0019-1035(03)00043-5.[4] Morschhauser et al. (2011), doi:10.1016/j.icarus.2010.12.028.[5] Baumeister et al. (2023), doi:10.1051/0004-6361/202245791.[6] Connolly (2009), doi:10.1029/2009GC002540.[7] Takeuchi & Saito (1972), doi:10.1016/B978-0-12-460811-5.50010-6.[8] Dumoulin et al. (2017), doi:10.1002/2016JE005249.[9] Rosenblatt et al. (2021), doi:10.3390/rs13091624.[10] Cascioli et al. (2023), doi:10.3847/PSJ/acc73c.