André Luís Tischler
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
André Luís Tischler has a total of 41 co-authors. Here are the top co-authors by number of shared publications:
- Alessandro Dal'Col Lúcio
Universidade Federal de Santa Maria
14 shared publications - Maria Inês Diel
Universidade Federal de Santa Maria - UFSM
12 shared publications - Darlei Michalski Lambrecht
Universidade Federal de Santa Maria
11 shared publications - Francieli de Lima Tartaglia
Universidade Federal de Santa Maria, Brazil
11 shared publications - João Alberto Zemolin
Universidade Federal de Santa Maria, Brazil
6 shared publications - Lucas Encarnação Marques
Universidade Federal de Santa Maria, Brasil
6 shared publications
Latest Publications
- Open Access
- 20 May 2026
- Published by Wiley in Crop Science
- Vol. 66 (3)
Phenotypic and genotypic analyses of large‐seeded soybean germplasm for vegetable soybean breeding
Vegetable soybean [ Glycine max (L.) Merr.], commonly known as edamame, is harvested at the R6 growth stage as green pods and beans, offering a rich source of protein, oil, fiber, and essential nutrients. While US market demand for edamame has increased over the past two decades, there is a lack of available domestic products compared to those imported from East Asia, underscoring the need for improved cultivars regionally adapted to the United States. In this study, 223 large‐seeded soybean accessions were evaluated in a field near Fayetteville, AR, in 2023 and 2024 for key traits related to edamame quality, including five appearance traits (R6 10‐pod, R6 10‐bean, and R8 10‐seed weights; R6 pod/R6 bean and R6 bean/R8 seed weight ratios), two taste‐related traits (sucrose and alanine contents), and four nutritional traits (protein, oil, fiber, and amino acid profiles). Based on these phenotypic traits and population structure, 30 elite accessions with superior and diverse trait combinations were identified as a core germplasm set to support edamame breeding for US production regions. Genome‐wide association study detected 33 single‐nucleotide polymorphisms significantly associated with appearance traits, while genomic prediction models demonstrated moderate to high accuracies, with BayesA and genomic best linear unbiased prediction consistently performing best across traits. These findings provide preliminary genetic and genomic resources to support the development of regionally adapted, high‐quality edamame cultivars for the expanding US market.
- 20 May 2026
- Published by Wiley in Crop Science
- Vol. 66 (3)
Open AccessPhenotypic and genotypic analyses of large‐seeded soybean germplasm for vegetable soybean breeding
Vegetable soybean [ Glycine max (L.) Merr.], commonly known as edamame, is harvested at the R6 growth stage as green pods and beans, offering a rich source of protein, oil, fiber, and essential nutrients. While US market demand for edamame has increased over the past two decades, there is a lack of available domestic products compared to those imported from East Asia, underscoring the need for improved cultivars regionally adapted to the United States. In this study, 223 large‐seeded soybean accessions were evaluated in a field near Fayetteville, AR, in 2023 and 2024 for key traits related to edamame quality, including five appearance traits (R6 10‐pod, R6 10‐bean, and R8 10‐seed weights; R6 pod/R6 bean and R6 bean/R8 seed weight ratios), two taste‐related traits (sucrose and alanine contents), and four nutritional traits (protein, oil, fiber, and amino acid profiles). Based on these phenotypic traits and population structure, 30 elite accessions with superior and diverse trait combinations were identified as a core germplasm set to support edamame breeding for US production regions. Genome‐wide association study detected 33 single‐nucleotide polymorphisms significantly associated with appearance traits, while genomic prediction models demonstrated moderate to high accuracies, with BayesA and genomic best linear unbiased prediction consistently performing best across traits. These findings provide preliminary genetic and genomic resources to support the development of regionally adapted, high‐quality edamame cultivars for the expanding US market.
- 26 August 2024
- Published by Wiley in New Zealand Journal of Crop and Horticultural Science
- Vol. 53 (5) , 1653-1664
Canonical correlations between wheat traits in multienvironment trials
Wheat is a crop of great food importance for food production in Brazil. However, the improvement of this crop is still concentrated in isolated areas, which hinders advances in new cultivation regions due to the extensive demand for existing information. In this investigation, four wheat genotypes analysed to study associations and interrelationships between wheat traits across nine environments during the agricultural years of 2016, 2017 and 2018. The experiment was conducted using a randomised block design with four repetitions, and the analysis was divided into two groups: morphological and productive traits of wheat, comprising three and eleven characteristics, respectively. Canonical correlations between the morphological and productive groups were found to be dependent in most environments. Taller plants with longer main spikes and longer tiller spikes can be indirectly selected to increase grain yield under different sowing conditions. The information generated in this study indicate that some care must be taken when using the interrelations between trait groups to select or recommend genotypes for broader regions, as these relationships are influenced by the specific conditions of each region and sub‐region.
- 26 August 2024
- Published by Wiley in New Zealand Journal of Crop and Horticultural Science
- Vol. 53 (5) , 1653-1664
Canonical correlations between wheat traits in multienvironment trials
Wheat is a crop of great food importance for food production in Brazil. However, the improvement of this crop is still concentrated in isolated areas, which hinders advances in new cultivation regions due to the extensive demand for existing information. In this investigation, four wheat genotypes analysed to study associations and interrelationships between wheat traits across nine environments during the agricultural years of 2016, 2017 and 2018. The experiment was conducted using a randomised block design with four repetitions, and the analysis was divided into two groups: morphological and productive traits of wheat, comprising three and eleven characteristics, respectively. Canonical correlations between the morphological and productive groups were found to be dependent in most environments. Taller plants with longer main spikes and longer tiller spikes can be indirectly selected to increase grain yield under different sowing conditions. The information generated in this study indicate that some care must be taken when using the interrelations between trait groups to select or recommend genotypes for broader regions, as these relationships are influenced by the specific conditions of each region and sub‐region.
- Open Access
- 15 March 2024
- Published by Revista Brasileira de Biometria in Brazilian Journal of Biometrics
- Vol. 42 (1) , 59-67
Genetic dissimilarity between sugarcane genotypes at different harvest period for brown sugar production
The purpose of this study was to characterize and identify the dissimilarity between sugarcane genotypes through technological and agronomic traits, in three harvest periods for brown sugar production. A randomized complete block design with four replications, using a split-plot treatment layout was used (IACSP 93-3046, RB 96-6928, IACSP 95-5094, IACSP 97-4039, SP 81-3250, IACSP 95-5000, RB 86-7515, IACSP 96-3060, IACSP 04-704, IACSP 04-656) and three harvest periods (15, 17 and 19 months of cultivation) with four replications. Technological traits related to quality parameters and agronomic traits related to the productive aspect were evaluated. According to the results, all genotypes showed a better response in the second harvest. The qualitative variables the apparent sucrose in sugarcane, total recoverable sugars and soluble solids in sugarcane showed differences between genotypes and seasons and are the ones that most contribute to the genetic divergence of brown sugar. For the production of dark colored sugar, the RB96-6928 genotype is recommended among all those evaluated, in the three growing seasons. As for the production of light-colored brown sugar, the cultivation of the genotypes IACSP 04-656 and IACSP95-5094 in season 1, the IACSP 97-4039 in season 2 and the IACSP95-5094 in season 3 is recommended.
- 15 March 2024
- Published by Revista Brasileira de Biometria in Brazilian Journal of Biometrics
- Vol. 42 (1) , 59-67
Open AccessGenetic dissimilarity between sugarcane genotypes at different harvest period for brown sugar production
The purpose of this study was to characterize and identify the dissimilarity between sugarcane genotypes through technological and agronomic traits, in three harvest periods for brown sugar production. A randomized complete block design with four replications, using a split-plot treatment layout was used (IACSP 93-3046, RB 96-6928, IACSP 95-5094, IACSP 97-4039, SP 81-3250, IACSP 95-5000, RB 86-7515, IACSP 96-3060, IACSP 04-704, IACSP 04-656) and three harvest periods (15, 17 and 19 months of cultivation) with four replications. Technological traits related to quality parameters and agronomic traits related to the productive aspect were evaluated. According to the results, all genotypes showed a better response in the second harvest. The qualitative variables the apparent sucrose in sugarcane, total recoverable sugars and soluble solids in sugarcane showed differences between genotypes and seasons and are the ones that most contribute to the genetic divergence of brown sugar. For the production of dark colored sugar, the RB96-6928 genotype is recommended among all those evaluated, in the three growing seasons. As for the production of light-colored brown sugar, the cultivation of the genotypes IACSP 04-656 and IACSP95-5094 in season 1, the IACSP 97-4039 in season 2 and the IACSP95-5094 in season 3 is recommended.
- Open Access
- 1 January 2024
- Published by FapUNIFESP (SciELO) in Scientia Agricola
- Vol. 81, e20220211
Growth of tomato seedlings: an approach with the logistic model as a function of the product of thermal efficiency and photosynthetically active radiation
This study aimed to evaluate the use of the product of thermal efficiency and photosynthetically active radiation (TEP) to model the growth of tomato seedlings across different growing seasons. The work was conducted in a completely randomized design with four replicates in two seasons (summer/autumn and winter/spring). Height, diameter, the Dickson’s Quality Index (DQI), and total plant mass (TPM) were measured at 15, 20, 25, 30, 35 and 40 days after sowing (DAS). The logistic model was fitted for each measured variable as a function of TEP, and the partial derivatives of the fitted function estimated the critical points. The results demonstrated that the logistic function effectively explained the nonlinear relationships of seedling growth. The fit quality parameters showed high fitted coefficients of determination and low values for the standard error of fit, residual standard deviation, and intrinsic and parametric nonlinearity. It was possible to characterize the growth process of tomato seedlings in both growth periods investigated. The logistic model fitted for the studied variables as a function of TEP becomes an accurate model capable of describing growth aspects of tomato seedlings, such as growth estimation, growth speed, and growth rate, essential parameters for decision-making in tomato cultivation.
- 1 January 2024
- Published by FapUNIFESP (SciELO) in Scientia Agricola
- Vol. 81, e20220211
Open AccessGrowth of tomato seedlings: an approach with the logistic model as a function of the product of thermal efficiency and photosynthetically active radiation
This study aimed to evaluate the use of the product of thermal efficiency and photosynthetically active radiation (TEP) to model the growth of tomato seedlings across different growing seasons. The work was conducted in a completely randomized design with four replicates in two seasons (summer/autumn and winter/spring). Height, diameter, the Dickson’s Quality Index (DQI), and total plant mass (TPM) were measured at 15, 20, 25, 30, 35 and 40 days after sowing (DAS). The logistic model was fitted for each measured variable as a function of TEP, and the partial derivatives of the fitted function estimated the critical points. The results demonstrated that the logistic function effectively explained the nonlinear relationships of seedling growth. The fit quality parameters showed high fitted coefficients of determination and low values for the standard error of fit, residual standard deviation, and intrinsic and parametric nonlinearity. It was possible to characterize the growth process of tomato seedlings in both growth periods investigated. The logistic model fitted for the studied variables as a function of TEP becomes an accurate model capable of describing growth aspects of tomato seedlings, such as growth estimation, growth speed, and growth rate, essential parameters for decision-making in tomato cultivation.
- Open Access
- 1 January 2024
- Published by FapUNIFESP (SciELO) in Ciência Rural
- Vol. 54 (10) , e20230428
Experimental plan for carrot culture
The carrotculture stands out on the world stage due to its nutritional characteristics and economic importance, an aspect that demands the constant development of research aiming greater productivity. Thus, this study proposed an experimental plan, determining the estimates of plot size, sample size, and number of repetitions, with the purpose of increasing the precision and reliability of the results of the experiments with the carrot crop. Six uniformity trials were conducted, using three cultivars in two growing seasons (Season: 2019 and 2021).Each plant was considered a basic experimental unit and in each BEU, the variables shoot height, root length, shoot fresh mass, root fresh mass, and root diameter were measured. The size of the plot, sample, and the number of repetitions was estimated by the method of maximum curvature of the coefficient of variation. The results recommend that for experiments with the carrot crop, plots with twelve plants should be used. For a sampling of carrot plants in the plot, samples of eleven plants must be used in the direction of the row, considering a semi-amplitude of the confidence interval (D%) equal to 20% of the mean, with a confidence level of 95%. For a minimum significant difference in the Tukey test expressed as a percentage of the 50% mean, plots of twelve plants per crop row, with eight replicates, are recommended.
- 1 January 2024
- Published by FapUNIFESP (SciELO) in Ciência Rural
- Vol. 54 (10) , e20230428
Open AccessExperimental plan for carrot culture
The carrotculture stands out on the world stage due to its nutritional characteristics and economic importance, an aspect that demands the constant development of research aiming greater productivity. Thus, this study proposed an experimental plan, determining the estimates of plot size, sample size, and number of repetitions, with the purpose of increasing the precision and reliability of the results of the experiments with the carrot crop. Six uniformity trials were conducted, using three cultivars in two growing seasons (Season: 2019 and 2021).Each plant was considered a basic experimental unit and in each BEU, the variables shoot height, root length, shoot fresh mass, root fresh mass, and root diameter were measured. The size of the plot, sample, and the number of repetitions was estimated by the method of maximum curvature of the coefficient of variation. The results recommend that for experiments with the carrot crop, plots with twelve plants should be used. For a sampling of carrot plants in the plot, samples of eleven plants must be used in the direction of the row, considering a semi-amplitude of the confidence interval (D%) equal to 20% of the mean, with a confidence level of 95%. For a minimum significant difference in the Tukey test expressed as a percentage of the 50% mean, plots of twelve plants per crop row, with eight replicates, are recommended.
- Open Access
- 29 August 2023
- Published by Lepidus Tecnologia in Comunicata Scientiae
- Vol. 15, e4209
Growth curve pea in different seasons as a function of accumulated thermal sum
The objective of this study was to determine the performance of peas grown in the field, in three growing seasons, by adjusting the nonlinear logistic model and its critical points. Uniformity trials were conducted in the field in the years 2016, 2017 and 2018 in the experimental area of the Crop Science Department of the Federal University of Santa Maria. The cultivar used was the Pea Grain 40. The values of the average mass of pods per plant, obtained in each harvest, were accumulated successively for each row of cultivation. After adjusting the nonlinear logistic model, the average pod mass per plant as a function of the accumulated thermal sum and the critical points were estimated by the partial derivatives of the adjusted function. The adjustment of the parameters of the logistic model and the critical points calculated by bootstrap resampling allowed comparisons to be made between the times of pea cultivation. The pea crop is influenced by environmental conditions, which interferes with the crop cycle and productivity. Season 1 was the most productive, with maximum increases in production in the shortest period (592.5 °C days-1 to produce 119.52 g plant-1), causing a high production peak in relation to the other seasons analyzed. The adjustment of the logistic model allowed to describe the pea production cycle over time at different growing seasons.
- 29 August 2023
- Published by Lepidus Tecnologia in Comunicata Scientiae
- Vol. 15, e4209
Open AccessGrowth curve pea in different seasons as a function of accumulated thermal sum
The objective of this study was to determine the performance of peas grown in the field, in three growing seasons, by adjusting the nonlinear logistic model and its critical points. Uniformity trials were conducted in the field in the years 2016, 2017 and 2018 in the experimental area of the Crop Science Department of the Federal University of Santa Maria. The cultivar used was the Pea Grain 40. The values of the average mass of pods per plant, obtained in each harvest, were accumulated successively for each row of cultivation. After adjusting the nonlinear logistic model, the average pod mass per plant as a function of the accumulated thermal sum and the critical points were estimated by the partial derivatives of the adjusted function. The adjustment of the parameters of the logistic model and the critical points calculated by bootstrap resampling allowed comparisons to be made between the times of pea cultivation. The pea crop is influenced by environmental conditions, which interferes with the crop cycle and productivity. Season 1 was the most productive, with maximum increases in production in the shortest period (592.5 °C days-1 to produce 119.52 g plant-1), causing a high production peak in relation to the other seasons analyzed. The adjustment of the logistic model allowed to describe the pea production cycle over time at different growing seasons.
- Open Access
- 1 January 2023
- Published by FapUNIFESP (SciELO) in Ciência E Agrotecnologia
- Vol. 47, e008222
Plastochron, phenology, and production of green pea in different growing seasons
Pisum sativum L. is a multi-purpose crop. The duration of its vegetative and reproductive periods is determined by a combination of temperature and humidity and genotype response to these conditions. To minimize the loss of productivity due to adverse conditions in sensitive periods of the crop, we evaluated the phenological development and production of Pisum sativum L. in different growing seasons. We used a randomized block design, and the experiments were conducted across five growing seasons, with four replications and eight plants per experimental unit. The variables analyzed were as follows: plastochron, number of days to start flowering, full flowering, and beginning of harvest, the accumulated thermal sum to start flowering, full flowering, and beginning of harvest, and the number of pods, pod mass, and total productivity per unit area. The analysis of variance was performed, and the mean values of the data were compared using the Scott-Knott test. Principal component analysis was also performed from Pearson’s correlation matrix of phenological and production variables. In seasons 1, 4, and 5, the plants reached full flowering earlier, and the pod mass was considerably lower, resulting in lower yields. Seasons 2 and 3 were the most productive and showed lower results for plastochron, less thermal sum until full flowering, and a shorter photoperiod, which, combined with low temperatures during the growing season, resulted in a longer cultivation cycle.
- 1 January 2023
- Published by FapUNIFESP (SciELO) in Ciência E Agrotecnologia
- Vol. 47, e008222
Open AccessPlastochron, phenology, and production of green pea in different growing seasons
Pisum sativum L. is a multi-purpose crop. The duration of its vegetative and reproductive periods is determined by a combination of temperature and humidity and genotype response to these conditions. To minimize the loss of productivity due to adverse conditions in sensitive periods of the crop, we evaluated the phenological development and production of Pisum sativum L. in different growing seasons. We used a randomized block design, and the experiments were conducted across five growing seasons, with four replications and eight plants per experimental unit. The variables analyzed were as follows: plastochron, number of days to start flowering, full flowering, and beginning of harvest, the accumulated thermal sum to start flowering, full flowering, and beginning of harvest, and the number of pods, pod mass, and total productivity per unit area. The analysis of variance was performed, and the mean values of the data were compared using the Scott-Knott test. Principal component analysis was also performed from Pearson’s correlation matrix of phenological and production variables. In seasons 1, 4, and 5, the plants reached full flowering earlier, and the pod mass was considerably lower, resulting in lower yields. Seasons 2 and 3 were the most productive and showed lower results for plastochron, less thermal sum until full flowering, and a shorter photoperiod, which, combined with low temperatures during the growing season, resulted in a longer cultivation cycle.
- Open Access
- 1 September 2022
- Published by FapUNIFESP (SciELO) in Horticultura Brasileira
- Vol. 40 (3) , 247-254
Repeatability and number of measurements for productive variables in vegetable crops experiments
One of the ways to optimize the evaluation of the experiment and obtain high precision of the results is with the use of an adequate number of measurements for each variable observed in the experiment. In this sense, the objective of this study was to estimate the repeatability coefficient and the number of measurements necessary for the analysis of characters of production of zucchini, cucumber, pout pepper and pea. In the experiments carried out with zucchini and cucumber the variables number of fruits, fruit mass, fruit length, largest fruit diameter and smallest fruit diameter were evaluated. For pea the number, length and mass of pods, number and mass of grains per pod and for pout pepper number and mass of fruits, largest fruit diameter and length were evaluated. The repeatability coefficient (r) was estimated by the principal component method using the correlation matrix and the covariance matrix. The number of measurements for each variable was also determined based on the coefficients of determination of 0.80, 0.85, 0.90, 0.95 and 1.00. The estimated repeatability coefficient obtained the highest estimates using the covariance matrix, ranging from 0.67 to 0.84 for zucchini, from 0.66 to 0.97 for cucumber, from 0.47 to 0.70 for pea and from 0.57 to 0.71 for pout pepper. To evaluate the fruit mass in zucchini, cucumber, pea and pout pepper, are exactly, respectively, 7, 4, 8 and 8 measurements for a coefficient of determination of 95%.
- 1 September 2022
- Published by FapUNIFESP (SciELO) in Horticultura Brasileira
- Vol. 40 (3) , 247-254
Open AccessRepeatability and number of measurements for productive variables in vegetable crops experiments
One of the ways to optimize the evaluation of the experiment and obtain high precision of the results is with the use of an adequate number of measurements for each variable observed in the experiment. In this sense, the objective of this study was to estimate the repeatability coefficient and the number of measurements necessary for the analysis of characters of production of zucchini, cucumber, pout pepper and pea. In the experiments carried out with zucchini and cucumber the variables number of fruits, fruit mass, fruit length, largest fruit diameter and smallest fruit diameter were evaluated. For pea the number, length and mass of pods, number and mass of grains per pod and for pout pepper number and mass of fruits, largest fruit diameter and length were evaluated. The repeatability coefficient (r) was estimated by the principal component method using the correlation matrix and the covariance matrix. The number of measurements for each variable was also determined based on the coefficients of determination of 0.80, 0.85, 0.90, 0.95 and 1.00. The estimated repeatability coefficient obtained the highest estimates using the covariance matrix, ranging from 0.67 to 0.84 for zucchini, from 0.66 to 0.97 for cucumber, from 0.47 to 0.70 for pea and from 0.57 to 0.71 for pout pepper. To evaluate the fruit mass in zucchini, cucumber, pea and pout pepper, are exactly, respectively, 7, 4, 8 and 8 measurements for a coefficient of determination of 95%.
- Open Access
- 6 July 2022
- Published by Lepidus Tecnologia in Comunicata Scientiae
- Vol. 13, e3732
Production of cucumber cultivars according to the accumulated thermal sum
Cucumber is a species appreciated in cooking, in addition to providing various nutrients for health. In view of this, it is important that research on its growth is carried out, prioritizing statistical analyzes that effectively demonstrate the results. The objective was to verify the differences by analyzing of the variance and nonlinear models, in addition to characterizing the production, early production and production rate of cultivars of cucumber using of nonlinear models. An experiment was carried out in a randomized block design (RBD), with three cultivars (‘Atlantico’, ‘Caipira’ and ‘Fuyu’) in six replications. Two types of analysis of variance were performed for the variable mass of cucumber fruits. In the first the RBD design was considered with three cultivars and six replications and in the second the RBD design was considered in a split subdivided over time (cultivars x harvests). Afterwards, the Logistic growth model was adjusted for the fruit mass variable as a function of accumulated thermal sum, and determination of the critical points of the model. The use of nonlinear models to evaluate experiments with cultures of multiple harvests has advantages in relation to anova and complementary tests. The cultivar ‘Fuyu’, has higher productivity compared to the cultivars ‘Atlantico’ and ‘Caipira’, in addition to presenting greater precocity and production rate. The adjustment of the logistic model and its critical points allowed to identify the production, precocity and production rate of the evaluated cultivars of the cucumber.
- 6 July 2022
- Published by Lepidus Tecnologia in Comunicata Scientiae
- Vol. 13, e3732
Open AccessProduction of cucumber cultivars according to the accumulated thermal sum
Cucumber is a species appreciated in cooking, in addition to providing various nutrients for health. In view of this, it is important that research on its growth is carried out, prioritizing statistical analyzes that effectively demonstrate the results. The objective was to verify the differences by analyzing of the variance and nonlinear models, in addition to characterizing the production, early production and production rate of cultivars of cucumber using of nonlinear models. An experiment was carried out in a randomized block design (RBD), with three cultivars (‘Atlantico’, ‘Caipira’ and ‘Fuyu’) in six replications. Two types of analysis of variance were performed for the variable mass of cucumber fruits. In the first the RBD design was considered with three cultivars and six replications and in the second the RBD design was considered in a split subdivided over time (cultivars x harvests). Afterwards, the Logistic growth model was adjusted for the fruit mass variable as a function of accumulated thermal sum, and determination of the critical points of the model. The use of nonlinear models to evaluate experiments with cultures of multiple harvests has advantages in relation to anova and complementary tests. The cultivar ‘Fuyu’, has higher productivity compared to the cultivars ‘Atlantico’ and ‘Caipira’, in addition to presenting greater precocity and production rate. The adjustment of the logistic model and its critical points allowed to identify the production, precocity and production rate of the evaluated cultivars of the cucumber.
- Open Access
- 1 January 2022
- Published by FapUNIFESP (SciELO) in Bragantia
- Vol. 81
Onion culture: experimental techniques for carrying out high precision experiments
- 1 January 2022
- Published by FapUNIFESP (SciELO) in Bragantia
- Vol. 81
Open AccessOnion culture: experimental techniques for carrying out high precision experiments