João Alberto Zemolin
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
João Alberto Zemolin has a total of 14 co-authors. Here are the top co-authors by number of shared publications:
- Alessandro Dal'Col Lúcio
Universidade Federal de Santa Maria
7 shared publications - André Luís Tischler
Universidade Federal de Santa Maria, Brazil
6 shared publications - Francieli de Lima Tartaglia
Universidade Federal de Santa Maria, Brazil
6 shared publications - Maria Inês Diel
Universidade Federal de Santa Maria - UFSM
6 shared publications - Darlei Michalski Lambrecht
Universidade Federal de Santa Maria
5 shared publications - Lucas Encarnação Marques
Universidade Federal de Santa Maria, Brasil
5 shared publications
Latest Publications
- Open Access
- 1 January 2024
- Published by FapUNIFESP (SciELO) in Scientia Agricola
- Vol. 81, e20220211
Growth of tomato seedlings: an approach with the logistic model as a function of the product of thermal efficiency and photosynthetically active radiation
This study aimed to evaluate the use of the product of thermal efficiency and photosynthetically active radiation (TEP) to model the growth of tomato seedlings across different growing seasons. The work was conducted in a completely randomized design with four replicates in two seasons (summer/autumn and winter/spring). Height, diameter, the Dickson’s Quality Index (DQI), and total plant mass (TPM) were measured at 15, 20, 25, 30, 35 and 40 days after sowing (DAS). The logistic model was fitted for each measured variable as a function of TEP, and the partial derivatives of the fitted function estimated the critical points. The results demonstrated that the logistic function effectively explained the nonlinear relationships of seedling growth. The fit quality parameters showed high fitted coefficients of determination and low values for the standard error of fit, residual standard deviation, and intrinsic and parametric nonlinearity. It was possible to characterize the growth process of tomato seedlings in both growth periods investigated. The logistic model fitted for the studied variables as a function of TEP becomes an accurate model capable of describing growth aspects of tomato seedlings, such as growth estimation, growth speed, and growth rate, essential parameters for decision-making in tomato cultivation.
- 1 January 2024
- Published by FapUNIFESP (SciELO) in Scientia Agricola
- Vol. 81, e20220211
Open AccessGrowth of tomato seedlings: an approach with the logistic model as a function of the product of thermal efficiency and photosynthetically active radiation
This study aimed to evaluate the use of the product of thermal efficiency and photosynthetically active radiation (TEP) to model the growth of tomato seedlings across different growing seasons. The work was conducted in a completely randomized design with four replicates in two seasons (summer/autumn and winter/spring). Height, diameter, the Dickson’s Quality Index (DQI), and total plant mass (TPM) were measured at 15, 20, 25, 30, 35 and 40 days after sowing (DAS). The logistic model was fitted for each measured variable as a function of TEP, and the partial derivatives of the fitted function estimated the critical points. The results demonstrated that the logistic function effectively explained the nonlinear relationships of seedling growth. The fit quality parameters showed high fitted coefficients of determination and low values for the standard error of fit, residual standard deviation, and intrinsic and parametric nonlinearity. It was possible to characterize the growth process of tomato seedlings in both growth periods investigated. The logistic model fitted for the studied variables as a function of TEP becomes an accurate model capable of describing growth aspects of tomato seedlings, such as growth estimation, growth speed, and growth rate, essential parameters for decision-making in tomato cultivation.
- Open Access
- 1 January 2023
- Published by FapUNIFESP (SciELO) in Revista Ceres
- Vol. 70 (5) , e70501
Development of Flaxseed Submitted to Nitrogen Doses
The flaxseed is little explored under Brazilian cultivation conditions, generating a gap in information about the appropriate management of the crop, in the country. Hence, the objective was to find the appropriate dose of nitrogen for the development of the variables: technical length, yield length, main stem diameter, number of grains per pod, plant grain yield, and plant dry mass of two flaxseed varieties, brown and golden, in places with subtropical and tropical climate in Brazil. The treatments consisted of a two-factor 2 x 6 experiment, consisting of two flax varieties (brown and golden) and six nitrogen doses (0; 30; 60; 90; 120 and 150 kg ha-1), in randomized blocks with four repetitions and three different environments: Santa Maria and Frederico Westphalen, in the state of Rio Grande do Sul, and Viçosa, in the state of Minas Gerais. The brown variety obtained greater technical and yield length compared to the golden variety, on the other hand, the golden variety showed a higher number of grains per capsule and higher plant grain yield compared to the brown variety, in the three environments. The plant dry mass increased linearly and proportionally to the increase in nitrogen doses in Santa Maria and Frederico Westphalen environments. Therefore, flaxseed responds differently to nitrogen supplementation according to the cultivation environment, showing wide variability. The different doses of nitrogen influenced the variables analyzed and the varieties of flaxseed differently, depending on the environment.
- 1 January 2023
- Published by FapUNIFESP (SciELO) in Revista Ceres
- Vol. 70 (5) , e70501
Open AccessDevelopment of Flaxseed Submitted to Nitrogen Doses
The flaxseed is little explored under Brazilian cultivation conditions, generating a gap in information about the appropriate management of the crop, in the country. Hence, the objective was to find the appropriate dose of nitrogen for the development of the variables: technical length, yield length, main stem diameter, number of grains per pod, plant grain yield, and plant dry mass of two flaxseed varieties, brown and golden, in places with subtropical and tropical climate in Brazil. The treatments consisted of a two-factor 2 x 6 experiment, consisting of two flax varieties (brown and golden) and six nitrogen doses (0; 30; 60; 90; 120 and 150 kg ha-1), in randomized blocks with four repetitions and three different environments: Santa Maria and Frederico Westphalen, in the state of Rio Grande do Sul, and Viçosa, in the state of Minas Gerais. The brown variety obtained greater technical and yield length compared to the golden variety, on the other hand, the golden variety showed a higher number of grains per capsule and higher plant grain yield compared to the brown variety, in the three environments. The plant dry mass increased linearly and proportionally to the increase in nitrogen doses in Santa Maria and Frederico Westphalen environments. Therefore, flaxseed responds differently to nitrogen supplementation according to the cultivation environment, showing wide variability. The different doses of nitrogen influenced the variables analyzed and the varieties of flaxseed differently, depending on the environment.
- Open Access
- 1 September 2022
- Published by FapUNIFESP (SciELO) in Horticultura Brasileira
- Vol. 40 (3) , 247-254
Repeatability and number of measurements for productive variables in vegetable crops experiments
One of the ways to optimize the evaluation of the experiment and obtain high precision of the results is with the use of an adequate number of measurements for each variable observed in the experiment. In this sense, the objective of this study was to estimate the repeatability coefficient and the number of measurements necessary for the analysis of characters of production of zucchini, cucumber, pout pepper and pea. In the experiments carried out with zucchini and cucumber the variables number of fruits, fruit mass, fruit length, largest fruit diameter and smallest fruit diameter were evaluated. For pea the number, length and mass of pods, number and mass of grains per pod and for pout pepper number and mass of fruits, largest fruit diameter and length were evaluated. The repeatability coefficient (r) was estimated by the principal component method using the correlation matrix and the covariance matrix. The number of measurements for each variable was also determined based on the coefficients of determination of 0.80, 0.85, 0.90, 0.95 and 1.00. The estimated repeatability coefficient obtained the highest estimates using the covariance matrix, ranging from 0.67 to 0.84 for zucchini, from 0.66 to 0.97 for cucumber, from 0.47 to 0.70 for pea and from 0.57 to 0.71 for pout pepper. To evaluate the fruit mass in zucchini, cucumber, pea and pout pepper, are exactly, respectively, 7, 4, 8 and 8 measurements for a coefficient of determination of 95%.
- 1 September 2022
- Published by FapUNIFESP (SciELO) in Horticultura Brasileira
- Vol. 40 (3) , 247-254
Open AccessRepeatability and number of measurements for productive variables in vegetable crops experiments
One of the ways to optimize the evaluation of the experiment and obtain high precision of the results is with the use of an adequate number of measurements for each variable observed in the experiment. In this sense, the objective of this study was to estimate the repeatability coefficient and the number of measurements necessary for the analysis of characters of production of zucchini, cucumber, pout pepper and pea. In the experiments carried out with zucchini and cucumber the variables number of fruits, fruit mass, fruit length, largest fruit diameter and smallest fruit diameter were evaluated. For pea the number, length and mass of pods, number and mass of grains per pod and for pout pepper number and mass of fruits, largest fruit diameter and length were evaluated. The repeatability coefficient (r) was estimated by the principal component method using the correlation matrix and the covariance matrix. The number of measurements for each variable was also determined based on the coefficients of determination of 0.80, 0.85, 0.90, 0.95 and 1.00. The estimated repeatability coefficient obtained the highest estimates using the covariance matrix, ranging from 0.67 to 0.84 for zucchini, from 0.66 to 0.97 for cucumber, from 0.47 to 0.70 for pea and from 0.57 to 0.71 for pout pepper. To evaluate the fruit mass in zucchini, cucumber, pea and pout pepper, are exactly, respectively, 7, 4, 8 and 8 measurements for a coefficient of determination of 95%.
- Open Access
- 6 July 2022
- Published by Lepidus Tecnologia in Comunicata Scientiae
- Vol. 13, e3732
Production of cucumber cultivars according to the accumulated thermal sum
Cucumber is a species appreciated in cooking, in addition to providing various nutrients for health. In view of this, it is important that research on its growth is carried out, prioritizing statistical analyzes that effectively demonstrate the results. The objective was to verify the differences by analyzing of the variance and nonlinear models, in addition to characterizing the production, early production and production rate of cultivars of cucumber using of nonlinear models. An experiment was carried out in a randomized block design (RBD), with three cultivars (‘Atlantico’, ‘Caipira’ and ‘Fuyu’) in six replications. Two types of analysis of variance were performed for the variable mass of cucumber fruits. In the first the RBD design was considered with three cultivars and six replications and in the second the RBD design was considered in a split subdivided over time (cultivars x harvests). Afterwards, the Logistic growth model was adjusted for the fruit mass variable as a function of accumulated thermal sum, and determination of the critical points of the model. The use of nonlinear models to evaluate experiments with cultures of multiple harvests has advantages in relation to anova and complementary tests. The cultivar ‘Fuyu’, has higher productivity compared to the cultivars ‘Atlantico’ and ‘Caipira’, in addition to presenting greater precocity and production rate. The adjustment of the logistic model and its critical points allowed to identify the production, precocity and production rate of the evaluated cultivars of the cucumber.
- 6 July 2022
- Published by Lepidus Tecnologia in Comunicata Scientiae
- Vol. 13, e3732
Open AccessProduction of cucumber cultivars according to the accumulated thermal sum
Cucumber is a species appreciated in cooking, in addition to providing various nutrients for health. In view of this, it is important that research on its growth is carried out, prioritizing statistical analyzes that effectively demonstrate the results. The objective was to verify the differences by analyzing of the variance and nonlinear models, in addition to characterizing the production, early production and production rate of cultivars of cucumber using of nonlinear models. An experiment was carried out in a randomized block design (RBD), with three cultivars (‘Atlantico’, ‘Caipira’ and ‘Fuyu’) in six replications. Two types of analysis of variance were performed for the variable mass of cucumber fruits. In the first the RBD design was considered with three cultivars and six replications and in the second the RBD design was considered in a split subdivided over time (cultivars x harvests). Afterwards, the Logistic growth model was adjusted for the fruit mass variable as a function of accumulated thermal sum, and determination of the critical points of the model. The use of nonlinear models to evaluate experiments with cultures of multiple harvests has advantages in relation to anova and complementary tests. The cultivar ‘Fuyu’, has higher productivity compared to the cultivars ‘Atlantico’ and ‘Caipira’, in addition to presenting greater precocity and production rate. The adjustment of the logistic model and its critical points allowed to identify the production, precocity and production rate of the evaluated cultivars of the cucumber.
- Open Access
- 1 January 2022
- Published by FapUNIFESP (SciELO) in Ciência Rural
- Vol. 52 (12)
New insights on the influence of the quality of tomato seedlings on production of fruits cultivated in substracts
This study evaluated the relationships between the biometric characters of tomato seedlings with the production characters obtained at the end of the crop cycle, to determine how the quality of seedlings interferes with tomato productivity. An experiment was carried out in two growing seasons, in a completely randomized design, with four replications and the experimental unit consisting of five plants. The treatments consisted of seedlings with different ages, differentiated by the days after sowing (DAS): (15, 20, 25, 30, 35, and 40 DAS). After each evaluation of the seedlings, they were transplanted to the definitive production site, being evaluated until the end of the cycle. Biometric characters of seedlings and characters of fruit production were evaluated. Pearson correlation analysis and principal components (PCA) were performed to determine the relationships between the characters, path analysis to determine the direct and indirect effects, and analysis of canonical correlations between the groups of characters. In all analyses performed, weak correlation between the biometric characters of the seedlings (which evaluate the quality) with the characters of tomato fruit production in substrate cultivation was identified.
- 1 January 2022
- Published by FapUNIFESP (SciELO) in Ciência Rural
- Vol. 52 (12)
Open AccessNew insights on the influence of the quality of tomato seedlings on production of fruits cultivated in substracts
This study evaluated the relationships between the biometric characters of tomato seedlings with the production characters obtained at the end of the crop cycle, to determine how the quality of seedlings interferes with tomato productivity. An experiment was carried out in two growing seasons, in a completely randomized design, with four replications and the experimental unit consisting of five plants. The treatments consisted of seedlings with different ages, differentiated by the days after sowing (DAS): (15, 20, 25, 30, 35, and 40 DAS). After each evaluation of the seedlings, they were transplanted to the definitive production site, being evaluated until the end of the cycle. Biometric characters of seedlings and characters of fruit production were evaluated. Pearson correlation analysis and principal components (PCA) were performed to determine the relationships between the characters, path analysis to determine the direct and indirect effects, and analysis of canonical correlations between the groups of characters. In all analyses performed, weak correlation between the biometric characters of the seedlings (which evaluate the quality) with the characters of tomato fruit production in substrate cultivation was identified.
- Open Access
- 21 September 2021
- Published by FapUNIFESP (SciELO) in Horticultura Brasileira
- Vol. 39 (3) , 264-271
Production cycle and characterization of Italian zucchini genotypes by the logistic model
This study aimed to identify the productive cycle response of Italian zucchini genotypes grown under field conditions in two growing seasons using the nonlinear logistic model and its critical points. Two randomized block experiments were conducted, with three genotypes (Caserta, PX13067051, and Tronco) and two growing seasons (spring-summer and summer-fall), with eight replicates and each experimental unit consisting of 7 plants. The logistic nonlinear model was adjusted for the fruit mass variable, as a function of the accumulated thermal sum, and the critical points were estimated by the partial derivatives of the adjusted function. Adjustment by bootstrap resampling was performed to address the violation of assumptions. The results of intrinsic and parametric nonlinearity confirm the quality of the model fit. This experiment demonstrated that the zucchini genotypes evaluated were more productive in the spring-summer growing season, using the parameters and critical points obtained from the logistic nonlinear model. Genotypes PX13067051 and Caserta showed superior productivity to the Tronco genotype, and also fruited earlier and at a higher rate of production. The logistic growth model and its critical points characterized the production cycle of the zucchini genotypes in different growing seasons and allowed inferences to be made to differentiate the genotypes and the growing seasons.
- 21 September 2021
- Published by FapUNIFESP (SciELO) in Horticultura Brasileira
- Vol. 39 (3) , 264-271
Open AccessProduction cycle and characterization of Italian zucchini genotypes by the logistic model
This study aimed to identify the productive cycle response of Italian zucchini genotypes grown under field conditions in two growing seasons using the nonlinear logistic model and its critical points. Two randomized block experiments were conducted, with three genotypes (Caserta, PX13067051, and Tronco) and two growing seasons (spring-summer and summer-fall), with eight replicates and each experimental unit consisting of 7 plants. The logistic nonlinear model was adjusted for the fruit mass variable, as a function of the accumulated thermal sum, and the critical points were estimated by the partial derivatives of the adjusted function. Adjustment by bootstrap resampling was performed to address the violation of assumptions. The results of intrinsic and parametric nonlinearity confirm the quality of the model fit. This experiment demonstrated that the zucchini genotypes evaluated were more productive in the spring-summer growing season, using the parameters and critical points obtained from the logistic nonlinear model. Genotypes PX13067051 and Caserta showed superior productivity to the Tronco genotype, and also fruited earlier and at a higher rate of production. The logistic growth model and its critical points characterized the production cycle of the zucchini genotypes in different growing seasons and allowed inferences to be made to differentiate the genotypes and the growing seasons.
- 23 December 2020
- Published by Wiley in Agronomy Journal
- Vol. 113 (2) , 1394-1406
Experimental plan for tests with pea
Correct experimental planning is important to obtain more reliable data with high experimental precision. In this way, the results obtained and the technical recommendations generated are more reliable and representative. Thus, the objective of this work is to estimate the plot and sample sizes and the number of repetitions for the variables (a) number of pods per plant and (b) mass of pods per plant for pea (Pisum sativum L.) cultivation. Uniformity tests were carried in the years 2016, 2017, and 2018 in the experimental area of the Crop Science Department at Federal University of Santa Maria. The cultivar used was Pea Grain 40, which has an indeterminate growth habit, with a cycle of 75–90 d and a cylindrical pod. The plot size for evaluating the number of pods per plant and the mass of pods per plant for pea cultivation is eight and nine plants, respectively. The sample size for evaluating the number of pods per plant and the mass of pods per plant is eight plants in the direction of the line with a half‐width of the 20% confidence interval of the mean. For the variables number of pods per plant and pod mass per pea plant, 10 and 12 repetitions are required, respectively, to evaluate up to 20 treatments in a randomized block design and in the incomplete blocks design with up to 100 treatments for significant differences of 35% between treatment averages.
- 23 December 2020
- Published by Wiley in Agronomy Journal
- Vol. 113 (2) , 1394-1406
Experimental plan for tests with pea
Correct experimental planning is important to obtain more reliable data with high experimental precision. In this way, the results obtained and the technical recommendations generated are more reliable and representative. Thus, the objective of this work is to estimate the plot and sample sizes and the number of repetitions for the variables (a) number of pods per plant and (b) mass of pods per plant for pea (Pisum sativum L.) cultivation. Uniformity tests were carried in the years 2016, 2017, and 2018 in the experimental area of the Crop Science Department at Federal University of Santa Maria. The cultivar used was Pea Grain 40, which has an indeterminate growth habit, with a cycle of 75–90 d and a cylindrical pod. The plot size for evaluating the number of pods per plant and the mass of pods per plant for pea cultivation is eight and nine plants, respectively. The sample size for evaluating the number of pods per plant and the mass of pods per plant is eight plants in the direction of the line with a half‐width of the 20% confidence interval of the mean. For the variables number of pods per plant and pod mass per pea plant, 10 and 12 repetitions are required, respectively, to evaluate up to 20 treatments in a randomized block design and in the incomplete blocks design with up to 100 treatments for significant differences of 35% between treatment averages.