Federico Uriati
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Federico Uriati has a total of 20 co-authors. Here are the top co-authors by number of shared publications:
- Gianni Nicoletto
University of Parma
5 shared publications - Adrian Hugh Alexander Lutey
University of Parma
2 shared publications - Radomila Konečná
University of Žilina
2 shared publications - Alessandro Pirondi
University of Parma
1 shared publication - Bernardo Disma Monelli
Department of Civil and Industrial Engineering, University of Pisa, Largo Lucio Lazzarino 1, 56122 Pisa, Italy
1 shared publication - Ciro Santus
Department of Civil and Industrial Engineering—DICI, University of Pisa, Largo Lucio Lazzarino 1, 56122 Pisa, Italy
1 shared publication
Latest Publications
- Open Access
- 31 March 2026
- Published by MDPI AG in Engineering Proceedings
- Vol. 131 (1) , 24
Multiaxial Static and Fatigue Strength of LPBF-Manufactured AlSi10Mg in as-Built and T6 Conditions
Laser powder bed fusion (LPBF) technology has now reached a significant level of commercial maturity, offering some of the most reliable solutions in the additive manufacturing (AM) field. However, AM processes may introduce defects that result in high variability of mechanical properties and low reproducibility. This entails the need to thoroughly understand the behavior of the materials used, studying their response to the different types of stresses typical of real-world applications. The research activity presented consists of the analysis of the mechanical properties of the aluminum alloy AlSi10Mg, which is widely used due to its good strength-to-density ratio. Focus is put on the response to axial, torsional, and combined axial-torsional static and fatigue strength, comparing as-built T6 heat-treated conditions.
- 31 March 2026
- Published by MDPI AG in Engineering Proceedings
- Vol. 131 (1) , 24
Open AccessMultiaxial Static and Fatigue Strength of LPBF-Manufactured AlSi10Mg in as-Built and T6 Conditions
Laser powder bed fusion (LPBF) technology has now reached a significant level of commercial maturity, offering some of the most reliable solutions in the additive manufacturing (AM) field. However, AM processes may introduce defects that result in high variability of mechanical properties and low reproducibility. This entails the need to thoroughly understand the behavior of the materials used, studying their response to the different types of stresses typical of real-world applications. The research activity presented consists of the analysis of the mechanical properties of the aluminum alloy AlSi10Mg, which is widely used due to its good strength-to-density ratio. Focus is put on the response to axial, torsional, and combined axial-torsional static and fatigue strength, comparing as-built T6 heat-treated conditions.
- Open Access
- 26 December 2023
- Published by Elsevier in International Journal of Fatigue
- Vol. 181
Modelling of the surface morphology and size effects on fatigue strength of L-PBF Inconel 718 by comparing different testing specimens
- 26 December 2023
- Published by Elsevier in International Journal of Fatigue
- Vol. 181
Open AccessModelling of the surface morphology and size effects on fatigue strength of L-PBF Inconel 718 by comparing different testing specimens
- 10 May 2022
- Published by Springer Nature
- p. 333-339
Fatigue Behavior of As-Built L-PBF Inconel 718 and Surface Roughness-Based Modeling
- 10 May 2022
- Published by Springer Nature
- p. 333-339
Fatigue Behavior of As-Built L-PBF Inconel 718 and Surface Roughness-Based Modeling
- 30 April 2022
- Published by Springer Nature
- p. 117-125
FE Modelling of the Fatigue Behaviour of L-PBF Inconel 718 with As-Built Surfaces
- 30 April 2022
- Published by Springer Nature
- p. 117-125
FE Modelling of the Fatigue Behaviour of L-PBF Inconel 718 with As-Built Surfaces
- Open Access
- 21 April 2022
- Published by University of Porto in Engineering Manufacturing Letters
- Vol. 1 (1) , 34-39
Influence of surface orientation on fatigue performance of as-built additively manufactured Inconel 718
The fatigue performance of materials, such as Inconel 718, when produced by Laser Powder Bed fusion, needs to be fully understood to manage and exploit the full potential of this Additive Manufacturing technology. Microstructure and as-built surface morphology are strictly related to process parameters and are known to affect the fatigue response. The present contribution examines experimentally the fatigue behavior of laser powder bed fused Inconel 718 testing specimens printed along three different orientations with respect to the built direction. The observed directional fatigue behavior is discussed in terms of surface quality, near-surface microstructure and their interaction with the fatigue crack initiation mechanisms.
- 21 April 2022
- Published by University of Porto in Engineering Manufacturing Letters
- Vol. 1 (1) , 34-39
Open AccessInfluence of surface orientation on fatigue performance of as-built additively manufactured Inconel 718
The fatigue performance of materials, such as Inconel 718, when produced by Laser Powder Bed fusion, needs to be fully understood to manage and exploit the full potential of this Additive Manufacturing technology. Microstructure and as-built surface morphology are strictly related to process parameters and are known to affect the fatigue response. The present contribution examines experimentally the fatigue behavior of laser powder bed fused Inconel 718 testing specimens printed along three different orientations with respect to the built direction. The observed directional fatigue behavior is discussed in terms of surface quality, near-surface microstructure and their interaction with the fatigue crack initiation mechanisms.
- Open Access
- 7 May 2021
- Published by Wiley in Material Design & Processing Communication
- Vol. 3 (4) , e228
As‐built surface quality and fatigue resistance of Inconel 718 obtained by additive manufacturing
- 7 May 2021
- Published by Wiley in Material Design & Processing Communication
- Vol. 3 (4) , e228
Open AccessAs‐built surface quality and fatigue resistance of Inconel 718 obtained by additive manufacturing
- Open Access
- 13 March 2021
- Published by MDPI AG in Applied Sciences
- Vol. 11 (6) , 2572
An Optimization Workflow in Design for Additive Manufacturing
Additive Manufacturing (AM) brought a revolution in parts design and production. It enables the possibility to obtain objects with complex geometries and to exploit structural optimization algorithms. Nevertheless, AM is far from being a mature technology and advances are still needed from different perspectives. Among these, the literature highlights the need of improving the frameworks that describe the design process and taking full advantage of the possibilities offered by AM. This work aims to propose a workflow for AM guiding the designer during the embodiment design phase, from the engineering requirements to the production of the final part. The main aspects are the optimization of the dimensions and the topology of the parts, to take into consideration functional and manufacturing requirements, and to validate the geometric model by computer-aided engineering software. Moreover, a case study dealing with the redesign of a piston rod is presented, in which the proposed workflow is adopted. Results show the effectiveness of the workflow when applied to cases in which structural optimization could bring an advantage in the design of a part and the pros and cons of the choices made during the design phases were highlighted.
- 13 March 2021
- Published by MDPI AG in Applied Sciences
- Vol. 11 (6) , 2572
Open AccessAn Optimization Workflow in Design for Additive Manufacturing
Additive Manufacturing (AM) brought a revolution in parts design and production. It enables the possibility to obtain objects with complex geometries and to exploit structural optimization algorithms. Nevertheless, AM is far from being a mature technology and advances are still needed from different perspectives. Among these, the literature highlights the need of improving the frameworks that describe the design process and taking full advantage of the possibilities offered by AM. This work aims to propose a workflow for AM guiding the designer during the embodiment design phase, from the engineering requirements to the production of the final part. The main aspects are the optimization of the dimensions and the topology of the parts, to take into consideration functional and manufacturing requirements, and to validate the geometric model by computer-aided engineering software. Moreover, a case study dealing with the redesign of a piston rod is presented, in which the proposed workflow is adopted. Results show the effectiveness of the workflow when applied to cases in which structural optimization could bring an advantage in the design of a part and the pros and cons of the choices made during the design phases were highlighted.