Jing Cheng

With the continuous deepening of the country's reform and opening up, the country's science and technology and national economic level have been greatly developed. In terms of education, the government have put forward higher requirements. In addition, the government currently recommend that major universities in my country build a "school‐enterprise cooperation" talent training mechanism to improve the country's modernization and comprehensively improve our national cultural quality. Therefore, in this context, the article analyzes in detail the construction of the university‐enterprise cooperation training system for the improvement of college students' innovation and Practice ability. First, the article briefly outlines the significance of school‐enterprise cooperation in cultivating college students' innovative and Practice ability, secondly summarizes the current problems of China's school‐enterprise cooperation in cultivating college students' innovative and Practice ability, and finally puts forward several targeted strategies for the current problems. Improve the level of "school‐ enterprise cooperation" talent training mechanism in Chinese universities.

This paper analyzes the spatiotemporal changes and patterns of a regional water environment based on the hydrological and water quality monitoring times and the geographical locations of the monitoring sections in the research area, the plain of Cixi, eastern China. Based on the calculation of runoff generation and concentration in the coastal plain river network and based on the characteristics and impact evaluation of the regional water pollution, the migration and diffusion mechanisms of surface water pollutants were studied for different sources and characteristics of pollutants entering the river in different river sections. The analytic results show that the water environment and water resource security of the coastal plain mainly cause the problem of eutrophication in the water bodies, and the input of nitrogen and phosphorus from land sources is the main cause of eutrophication in the water bodies, mainly including the production and discharge of domestic sewage, nutrient loss in aquaculture water bodies, affecting agricultural activities, etc. The evaluation also demonstrates that with the development of coastal zones and the rapid development of coastal towns, as the population in coastal plain areas continues to increase, industrial development and population growth are the main driving factors for water quality changes.

In the current world, the increasingly developed industries of mankind have caused huge pollution to the earth on which we live. And the water resources, which are the source of human life, are also being seriously polluted and destroyed. Water pollution has become an urgent need to deal with in today’s world. In order to achieve sustainable development, people are constantly using new materials in the process of water treatment. Biochar material is one of them. In the thermochemical process, biomass produces a common by-product coke, which is also called biochar as a result of biomass decomposition. Due to the low price and large specific surface area which can reach over 1000 m²·g⁻¹, it has many applications and advantages in catalysis, adsorption, fuel cell, soil improvement, etc., and has a wide range of application prospects. Therefore, effectively prepared and used biochar in water treatment has become a method to improve the efficiency and economic benefits of thermochemical processes. In this overview, we first introduced the preparation methods of different new types of biomass materials, we then classified and discussed the various modification strategies, and finally discussed the application potential of biochar material for wastewater treatment.

(1) Setting a matrix dam in the paddy field drainage ditch has been recognized as an effective method to lower the velocity of water discharged from a paddy field in the drainage ditch, which can improve the purification efficiency of the drainage ditch for nitrogen and phosphorus pollutants, but the specific placement and thickness of the matrix dam have not been supported due to the insufficient research results. (2) Three thicknesses of the matrix dam were set in three locations of the physical model of the drainage ditch. By measuring the flow rate and water level in different sections, the optimal layout location and thickness of the matrix dam were determined. (3) When the matrix dam was located in section 1-1, the flow rate from sections A-A to C1-C1 was reduced by 0.159 m/s; when the matrix dam was located in section 2-2, the flow rate was reduced by 0.331 m/s; when the matrix dam was located in section 3-3, the flow rate was reduced by 0.360 m/s. (4) We concluded that the optimal design position of the matrix dam was section 3-3, 9.2 m from the entrance of the water flume, and the optimal design thickness was 0.3 m.

In view of the nitrogen and phosphorus non-point source pollution caused by paddy field drainage in southern China, two paddy fields in Nanjing and Yuyao cities were selected to study the effect of plant buffer zone–antifouling curtain walls on reducing non-point source pollution. The results showed that the designed plant buffer zone–antifouling curtain wall systems could significantly reduce the concentration of total nitrogen (TN) and total phosphorus (TP) in drainage of the two paddy fields. Compared with paddy field drainage in Nanjing, the interception rate of TN in the plant buffer zone and antifouling curtain wall were 33.0% and 59.3%, respectively; the removal rates of TP were about 18.4% and 40.3%, respectively. In addition, the contents of ammoniacal nitrogen (NH^3-N), nitrate nitrogen (NO^3-N) and Chemical Oxygen Demand (COD) were also significantly reduced. For the Yuyao experimental area, compared to the paddy field without the soil plant buffer zone (the control), the concentration of each indicator in the discharge water of the paddy fields with the soil plant buffer system operation mode was significantly reduced, the rejection rate of the TP, TN, total dissolved phosphorus (TDP), NO^3-N and NH^3-N were 64.28%, 70.66%, 83.73%, 65.22% and 80.69%, respectively. In summary, the construction of a plant buffer zone–antifouling curtain wall (soil plant buffer zone) has an obvious effect on the reduction of non-point source pollution in paddy fields, which could improve yield and fertilizer utilization. The plant buffer zone–antifouling curtain wall could be popularized and applied in local areas and southern China.

The membrane bioreactor (MBR), as one of the promising technologies, has been widely applied for treatments of wastewater. However, serious membrane fouling and low microbial activity have been reported as major problems hindering the development of the MBR. To overcome these drawbacks, we intend to improve the MBR process in the view of membrane surface modification and efficient granular bacteria cultivation. In the present study, immobilized photosynthetic bacteria integration with graphene oxide (GO)/polysulfone (PSF) composite membrane separation (IPMBR) was first applied for textile wastewater treatment. Due to the high activity of immobilized cells, the IPMBR system exhibited higher efficiency on the removal of color, ammonia–nitrogen, and chemical oxygen demand than the conventional MBR system. In comparison with a pure PSF membrane, GO/PSF composite membrane presented the higher hydrophilicity (water contact angles of 62.9°) and more attractive permeability (178.5 L/m²h) by reducing the adhesion of hydrophobic foulants. During the whole operation, the immobilized photobioreactor exhibited approximately seven times higher membrane permeability that that of the conventional MBR. Meanwhile, the effect of the structure and character of immobilized photosynthetic bacteria on the membrane fouling reduction was investigated in detail. The change of extracellular polymeric substance concentration, settleability and particle size of flocs was very beneficial to alleviate membrane fouling. As a result, this research will open a new avenue for developing efficient and anti-fouling MBR technology in the future.