Jesús Fausto Córdova-Escobedo
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Jesús Fausto Córdova-Escobedo has a total of 10 co-authors. Here are the top co-authors by number of shared publications:
- Felipe Mendoza-González
Universidad Veracruzana
7 shared publications - Adolfo López-Liévano
Universidad Veracruzana
2 shared publications - Fernando Rueda-Martínez
Universidad Veracruzana
2 shared publications - Francisco de Jesús Trejo-Molina
Universidad Veracruzana
2 shared publications - Jesús Fausto Córdova-Manzo
Universidad Veracruzana
2 shared publications - Mario Raúl Salmeron-Ortiz
Universidad Veracruzana
2 shared publications
Latest Publications
- Open Access
- 31 December 2022
- Published by ECORFAN in Revista de Desarrollo Urbano y Sustentable
- p. 18-30
Program for Sustainable Designs of led lighting systems
Computer Program made in MATLAB that allows sustainable designs of lighting systems with Led lamps for different user requirements. The program requires as data the dimensions, reflectance, cavities and the desired lighting level of the work area to be illuminated and the type of LED luminaire to be used. The calculations are carried out in a deterministic, precise and exact way, using the lumens method and the Official Mexican Standard for lighting designs. The program provides information such as the total number of luminaires to be used, the calculated lux level, the electrical power density, among others, as well as a graph that indicates an adequate design for the accommodation and distribution of the lamps in the work area to be illuminated. , complying with the Lighting Design Standards. The program correctly performs each of the calculations and at the end delivers the most suitable design for the accommodation of the lamps and their distances. Correct lighting means achieving an optimal balance between human needs, architectural considerations and energy efficiency.
- 31 December 2022
- Published by ECORFAN in Revista de Desarrollo Urbano y Sustentable
- p. 18-30
Open AccessProgram for Sustainable Designs of led lighting systems
Computer Program made in MATLAB that allows sustainable designs of lighting systems with Led lamps for different user requirements. The program requires as data the dimensions, reflectance, cavities and the desired lighting level of the work area to be illuminated and the type of LED luminaire to be used. The calculations are carried out in a deterministic, precise and exact way, using the lumens method and the Official Mexican Standard for lighting designs. The program provides information such as the total number of luminaires to be used, the calculated lux level, the electrical power density, among others, as well as a graph that indicates an adequate design for the accommodation and distribution of the lamps in the work area to be illuminated. , complying with the Lighting Design Standards. The program correctly performs each of the calculations and at the end delivers the most suitable design for the accommodation of the lamps and their distances. Correct lighting means achieving an optimal balance between human needs, architectural considerations and energy efficiency.
- Open Access
- 31 December 2022
- Published by ECORFAN in ECORFAN Journal Republic of Cameroon
- p. 14-21
Financial Sustainability in MSMEs of civil and electrical engineering in Coatzacoalcos
The factors that put financial stability at risk, and the successes in the financial management of MSMEs related to civil and electrical engineering in Coatzacoalcos were obtained. And the importance of financial planning and the Weighted Average Cost of Capital (CCPP or WACC) was shown, in addition to the Profitability of the company, which can be Economic or Financial, of the financial administration, the financial ratios of liquidity, of indebtedness. , profitability and coverage, economic risks globalization with the arrival of foreign companies, resulting in increased competition, and financial risk with the same globalization, the world economy is decisive for countries like the US and China for example In the methodological aspect, the survey was applied in which the MSMEs were also questioned about the financial risks, and the successes in their financial management. The survey was applied to 5 companies, of which 4 are from the branch of civil engineering, and 1 company dedicated to electrical engineering, company 1 that is medium presents a better financial management.
- 31 December 2022
- Published by ECORFAN in ECORFAN Journal Republic of Cameroon
- p. 14-21
Open AccessFinancial Sustainability in MSMEs of civil and electrical engineering in Coatzacoalcos
The factors that put financial stability at risk, and the successes in the financial management of MSMEs related to civil and electrical engineering in Coatzacoalcos were obtained. And the importance of financial planning and the Weighted Average Cost of Capital (CCPP or WACC) was shown, in addition to the Profitability of the company, which can be Economic or Financial, of the financial administration, the financial ratios of liquidity, of indebtedness. , profitability and coverage, economic risks globalization with the arrival of foreign companies, resulting in increased competition, and financial risk with the same globalization, the world economy is decisive for countries like the US and China for example In the methodological aspect, the survey was applied in which the MSMEs were also questioned about the financial risks, and the successes in their financial management. The survey was applied to 5 companies, of which 4 are from the branch of civil engineering, and 1 company dedicated to electrical engineering, company 1 that is medium presents a better financial management.
- Open Access
- 31 December 2022
- Published by ECORFAN in Journal of Technological Prototypes
- p. 1-10
Medical gas monitoring design applying image processing
Design of a methodology, that uses image processing to monitor the pressure indicators of medical gas tanks (oxygen and nitrogen) used in hospitals to care for patients who require it. This system can notify the pressure level reported by the indicators and its contribution is the application of technology that prevents the displacement of medical or technical personnel to the gas installations, resulting in a remote monitoring system.
- 31 December 2022
- Published by ECORFAN in Journal of Technological Prototypes
- p. 1-10
Open AccessMedical gas monitoring design applying image processing
Design of a methodology, that uses image processing to monitor the pressure indicators of medical gas tanks (oxygen and nitrogen) used in hospitals to care for patients who require it. This system can notify the pressure level reported by the indicators and its contribution is the application of technology that prevents the displacement of medical or technical personnel to the gas installations, resulting in a remote monitoring system.
- 31 December 2021
- Published by ECORFAN in Revista de Ingeniería Civil
- p. 1-8
Analysis of sustainable concrete made from cigarette butts on bending strength
In the research in the methodological aspect, the concrete mixture was designed, based on the ACI 211.1 standard; Cigarette butt fibers were included in the material with which the concrete was made to reuse materials that are polluting, and in this way a sustainable concrete was made. For the analysis and results, a press was used to test the compression pieces established by the NMX-C-083-ONNCCE-2014 Standard for concrete specimens. In the laboratory, the bending test was carried out with the NMX-C-191-ONNCCE-2015 in nine concrete beams, in a concrete sample the fibers of cigarette butt were added, in another polypropylene fibers were used, and a third sample of concrete without any fibers. The research concludes that the reuse of cigarette butt fibers to make hydraulic concrete will help reduce environmental pollution. The results of the compression tests were satisfactory for a concrete with f'c = 350 kg / cm2. Bending test tests on concrete beams met MR = 45 kg / cm2. Both design resistors.
- 31 December 2021
- Published by ECORFAN in Revista de Ingeniería Civil
- p. 1-8
Analysis of sustainable concrete made from cigarette butts on bending strength
In the research in the methodological aspect, the concrete mixture was designed, based on the ACI 211.1 standard; Cigarette butt fibers were included in the material with which the concrete was made to reuse materials that are polluting, and in this way a sustainable concrete was made. For the analysis and results, a press was used to test the compression pieces established by the NMX-C-083-ONNCCE-2014 Standard for concrete specimens. In the laboratory, the bending test was carried out with the NMX-C-191-ONNCCE-2015 in nine concrete beams, in a concrete sample the fibers of cigarette butt were added, in another polypropylene fibers were used, and a third sample of concrete without any fibers. The research concludes that the reuse of cigarette butt fibers to make hydraulic concrete will help reduce environmental pollution. The results of the compression tests were satisfactory for a concrete with f'c = 350 kg / cm2. Bending test tests on concrete beams met MR = 45 kg / cm2. Both design resistors.
- Open Access
- 31 December 2020
- Published by ECORFAN in Revista Tecnologías de la Información y Comunicaciones
- p. 17-22
Educational evaluation of renewable energy projects based on RETScreen software
In the design of renewable energy projects, a present problem is the techno-economic evaluation of them, regularly different methods and models are used to do it, in this work it is proposed to innovate in the degree of Engineering in Renewable Energies (LIER) of the UNAM in the National School of Superior Studies Juriquilla campus the way to evaluate projects using the software RETScreen. This paper presents a methodology to evaluate a wind energy project in the state of Queretaro Mexico. The project contemplates a wind turbine brand VESTAS V44 - 40m of 600 kW capacity of 40 m height in the state of Querétaro in the center of the country of Mexico. The initial costs of this wind turbine are 1,283 $/kW or 770,000 USD, with a rate of 80 $/kW. The electricity exported to the grid is 1,703 MWh and the income from electricity exports is 136,235.52 USD. With this wind turbine you can save 1,318.2 tCO2 per year or 566,414 liters of unused gasoline.
- 31 December 2020
- Published by ECORFAN in Revista Tecnologías de la Información y Comunicaciones
- p. 17-22
Open AccessEducational evaluation of renewable energy projects based on RETScreen software
In the design of renewable energy projects, a present problem is the techno-economic evaluation of them, regularly different methods and models are used to do it, in this work it is proposed to innovate in the degree of Engineering in Renewable Energies (LIER) of the UNAM in the National School of Superior Studies Juriquilla campus the way to evaluate projects using the software RETScreen. This paper presents a methodology to evaluate a wind energy project in the state of Queretaro Mexico. The project contemplates a wind turbine brand VESTAS V44 - 40m of 600 kW capacity of 40 m height in the state of Querétaro in the center of the country of Mexico. The initial costs of this wind turbine are 1,283 $/kW or 770,000 USD, with a rate of 80 $/kW. The electricity exported to the grid is 1,703 MWh and the income from electricity exports is 136,235.52 USD. With this wind turbine you can save 1,318.2 tCO2 per year or 566,414 liters of unused gasoline.
- Open Access
- 30 June 2020
- Published by ECORFAN in Revista de Arquitectura y Diseño
- p. 9-19
Design of ecological masonry piece for non-structural walls
In the research work in the methodological aspect, the tongue and groove Block was designed (geometry) in AutoCad, based on the NMX-C-038-ONNCCE-2004 standard; It was included in the material with which the Block was manufactured, crushed polypropylene plastic (PP) to reuse materials that are polluting, and in this way an ecological Block was made, later it was manufactured complying with the NMX-X-159 standard. ONNCCE-2004 the steel mold for the Block. For the analysis and results, a press was used to test the compression pieces established by the NMX-C-441-ONNCCE-2013 Standard for non-structural blocks. In the laboratory, the initial water absorption test was carried out with the NMX-C-037-ONNCCE-2005 in three pieces of blocks, in addition, the MATLAB software was used to obtain the effort-time graphs of the pieces of block with the different dosages of recycled plastic material. The research concludes that the reuse of polypropylene plastic to make blocks will help reduce environmental pollution. The results of the compression tests were satisfactory for non-structural blocks. The initial maximum water absorption tests to which the blocks were subjected, comply for exterior and interior walls.
- 30 June 2020
- Published by ECORFAN in Revista de Arquitectura y Diseño
- p. 9-19
Open AccessDesign of ecological masonry piece for non-structural walls
In the research work in the methodological aspect, the tongue and groove Block was designed (geometry) in AutoCad, based on the NMX-C-038-ONNCCE-2004 standard; It was included in the material with which the Block was manufactured, crushed polypropylene plastic (PP) to reuse materials that are polluting, and in this way an ecological Block was made, later it was manufactured complying with the NMX-X-159 standard. ONNCCE-2004 the steel mold for the Block. For the analysis and results, a press was used to test the compression pieces established by the NMX-C-441-ONNCCE-2013 Standard for non-structural blocks. In the laboratory, the initial water absorption test was carried out with the NMX-C-037-ONNCCE-2005 in three pieces of blocks, in addition, the MATLAB software was used to obtain the effort-time graphs of the pieces of block with the different dosages of recycled plastic material. The research concludes that the reuse of polypropylene plastic to make blocks will help reduce environmental pollution. The results of the compression tests were satisfactory for non-structural blocks. The initial maximum water absorption tests to which the blocks were subjected, comply for exterior and interior walls.
- Open Access
- 31 March 2019
- Published by ECORFAN in Revista del Desarrollo Tecnologico
- p. 24-35
Metodología para programar procesos con relevadores inteligentes
Objective: Design of a methodology based on problem based learning, to program intelligent relays and solve process automation problems. Methodology that will allow students and engineers interested in acquiring theoretical, heuristic and axiological skills on intelligent relay programming. The methodology will allow to acquire the proposed competences and process automation problems can be solved. Contribution: The methodology is designed with solved exercises in electrical, civil and mechanical engineering, which allow us to visualize the importance of learning to program processes with intelligent relays. The methodology helps the programmer acquire a critical thinking considering aspects such as the environment, integral health and safety. There is transversality to relate Educational programs of different disciplines and enrich the knowledge of intelligent relays from the programming and interpretation of block diagrams, ladder diagrams and time diagrams, familiarize yourself with the use of technical language and digital language (combinational and sequential circuits Follow the safety instructions and parameters to be manipulated for the correct operation of the electrical and electronic devices and establish the operation of the process.
- 31 March 2019
- Published by ECORFAN in Revista del Desarrollo Tecnologico
- p. 24-35
Open AccessMetodología para programar procesos con relevadores inteligentes
Objective: Design of a methodology based on problem based learning, to program intelligent relays and solve process automation problems. Methodology that will allow students and engineers interested in acquiring theoretical, heuristic and axiological skills on intelligent relay programming. The methodology will allow to acquire the proposed competences and process automation problems can be solved. Contribution: The methodology is designed with solved exercises in electrical, civil and mechanical engineering, which allow us to visualize the importance of learning to program processes with intelligent relays. The methodology helps the programmer acquire a critical thinking considering aspects such as the environment, integral health and safety. There is transversality to relate Educational programs of different disciplines and enrich the knowledge of intelligent relays from the programming and interpretation of block diagrams, ladder diagrams and time diagrams, familiarize yourself with the use of technical language and digital language (combinational and sequential circuits Follow the safety instructions and parameters to be manipulated for the correct operation of the electrical and electronic devices and establish the operation of the process.